I have searched on how to enable usb debugging in the forums for a broken screen but most if not all of them are for other devices and require flashing a custom rom (although i have no idea how to do that CWM? Odin????). Is it possible to enable us debugging for a sony Z2 Device under these conditions?
1. Broken Screen (touch screen irresponsive)
2. Stock Rom, No recovery menu (tried power on and volume button and also tried flashtool with volume button hold and only black screen came out but i have no idea what i am doing actually)
3. NO usb debugging.
Another method i actually seen other people using is to use an usb mouse to connect to the phone. Will the phone automatically register the mouse or must there be some 3rd party enabled on it (which in this case seems useless already)
Any help will be deeply appreciated and thank you for your help in advance. Repairing will cost quite alot of money (enough to get a new decent phone) so i wanted to extract the data out of the phone before i get a new phone.
There is also something post by other members such as in this thread and with code. How can i enter the code into my phone..?
http://forum.xda-developers.com/general/help/to-enable-usb-debugging-via-pc-t3001678
Sorry i am extremely noob at phone stuff but i really have no idea what is happening and i really really need help
Related
Hi all, can anyone help? I smashed my phone at the weekend and really want to get back in to it if only to turn on contacts sync and see who keeps texting me, but for some reason USB debugging isn't on. Phone is stock.
Plugging in with USB = recognised in device manager as Xperia Z3. I've tried to download Android SDK, and install the USB drivers from the Sony website (says best driver already installed - the ones from the Sony website don't have any kind of installation program so not sure what I'm supposed to do with them!).
I know this isn't easy but can anyone guide me through getting in to it and getting USB debugging on so I can use Android Control? It seems I need to get the phone in to recovery mode so that it automatically enables USB debugging? If I hold down power/volume up a few times or in a weird combination, the LED goes blue and the phone comes up in device manager as 's1boot' and then 's1boot fastboot'. I've tried installing the drivers I've found from DooMLoRD but they don't help me access the phone at all, it still says unable to find the device. adb devices from the adb folder command prompt says no devices (i presume because USB debugging still disabled). I feel like I have made progress but need a bit more progress still to get in, if it is at all possible!
New thread because I can't find anyone with a Sony Xperia Z3 trying this, with the same steps taken/blue LED etc.
USB OTG+ USB mouse
Try to use USB OTG+USB mouse, that did the trick for me
no display whatsoever... so having a mouse isn't going to help me sadly! unless i can get the screen displayed on a computer monitor or something?
So my new S7 's screen is completely dead. I can see the soft buttons light up and I've been trying to swipe but I can't. I was going to try to screen mirror to my Fire TV (by looking at a vid and hopefully hitting the right places to get it to connect) but the screen isn't passing any input.
So my next thought was to get a USB OTG cable and a mouse, although I have no idea how fast the pointer will move making guess the steps to connect really hard. I was also looking at chrome extension Vysor, but again, it need debugging enabled (which isn't) on the phone for it to work. Apparently sammy discontinued MHL support so there's no way to just plug in to in a TV with a cable,
Does anyone have any suggestions on how I can force access on the phone to get a backup? Again, I need something that will let me see the screen, preferably in as little steps as possible (the more menus I have to navigate, the less likely I'll be able to blindly fumble my way through)
Thanks!
Anyone?````
same situation here, not much resources out there. Is your phone still connected to your wifi? mine is not so I can't get google play to install apps to it.
If you can though...
Samsung SideSync was recommended on another forum, similar to vysor but might work wirelessly for you
Good luck, and please let me know if you find a solution. I might by vysor to try wireless (they haven't answered me whether or not wireless version by passes the need for usb debugging)
phatphat said:
So my new S7 's screen is completely dead. I can see the soft buttons light up and I've been trying to swipe but I can't. I was going to try to screen mirror to my Fire TV (by looking at a vid and hopefully hitting the right places to get it to connect) but the screen isn't passing any input.
So my next thought was to get a USB OTG cable and a mouse, although I have no idea how fast the pointer will move making guess the steps to connect really hard. I was also looking at chrome extension Vysor, but again, it need debugging enabled (which isn't) on the phone for it to work. Apparently sammy discontinued MHL support so there's no way to just plug in to in a TV with a cable,
Does anyone have any suggestions on how I can force access on the phone to get a backup? Again, I need something that will let me see the screen, preferably in as little steps as possible (the more menus I have to navigate, the less likely I'll be able to blindly fumble my way through)
Thanks!
Click to expand...
Click to collapse
If it's turning on (except by the screen) you can use Smart Switch or Kies to recover your data.
http://www.samsung.com/us/smart-switch/
http://www.samsung.com/us/support/owners/app/kies
OR You can use FIND MY MOBILE if you registered a Samsung account to unlock remotely and use USB.
https://findmymobile.samsung.com
SOLVED: S7 dropped > broken screen > how to recover images? Not rooted,not "usb mode"
So my wife dropped S7 to the floor and device ended up to be fully powered, but screen is now all black. Back and "software" button illuminates. I can change volume. I can take photos. So phone works, but screen is all black. Main concern is to have photos out from the phone. Contacts are synced, software etc. can be installed to new phone.
Kies finds the phone, but says that is' locked. Although phone does not have any passcodes or fingerprint, Kies cannot access to photos. Also the PC does see the device, but it won't allow me to see the contents. Find My Mobile is not activated, I think that I can't activate it now without phone. Also Smart Switch says that phone is locked. Phone settings are pretty much as out from the box. USB debugging is off, Developper options off, etc...
But I found that possible via ABD (?) I could access phone storage. Is it so? I sould start the phone to Recovery Mode / Download Mode? How to do that? Normally the phone is on and I can't switch it off. I can only soft reset is by keeping vol- + power buttons pressed for 10sec. But after that, phone just restarts to OS.
Please give hints how to proceed. What to try. New LCD is around 50USD and takes forever to get from Aliexpress/Ebay.
Why not use an external display? Hook it up to the USB-connector via an adaptor and it should work to unlock the phone using a PC-mouse.
gedhe said:
Why not use an external display? Hook it up to the USB-connector via an adaptor and it should work to unlock the phone using a PC-mouse.
Click to expand...
Click to collapse
O, it has such feature? Quick googling did not help how to do it. How does it work? Do I need some cable or device?
Any ideas how to proceed? I either can reboot device to Recovery mode and use ADB or connect external display to the device. Or if someone has any better solution
Please help. Family photos are in the phone
Try to unlock your lock screen with a usb mouse connected via otg and swiping up with the mouse. Then connect it to the computer and try to backup your data with kies or switch.
Tried many thing how to allow the connection from another phone or computer. However it was not possible to connect, so I ordered a new screen. Once new screen installed, it was not even a challenge Ordered new screen from Aliexpress.
Hi guys,
I had Oneplus 6 for the last couple of years (stock recovery, no-root), and the screen shattered last week. since then I bought a new phone, but I can’t extract files from the old device.
The main problem is the MTP options is not checked, as well as USB debugging therefore I don't have access to it with the windows explorer . However, I think the touch is still works (at least at the bottom of it) and beside the screen – the OP6 is fully functional and my PC recognize it.
I tried to enable it via ADB, but the device is not authorized. What can I do to get my vids and pics back?
p2p2020 said:
Hi guys,
I had Oneplus 6 for the last couple of years (stock recovery, no-root), and the screen shattered last week. since then I bought a new phone, but I can’t extract files from the old device.
The main problem is the MTP options is not checked, as well as USB debugging therefore I don't have access to it with the windows explorer . However, I think the touch is still works (at least at the bottom of it) and beside the screen – the OP6 is fully functional and my PC recognize it.
I tried to enable it via ADB, but the device is not authorized. What can I do to get my vids and pics back?
Click to expand...
Click to collapse
I guess the question is how broken is your phone? You cannot use adb, I think, until you enable usb debugging in developer options. To enable developer options you need to go to "about the phone" and click on build number like 7 times.
You can try uploading to google drive, or maybe use a bluetooth/maybe even usb mouse
EDIT:
I googled your problem, and this person recommends using an accessibility feature. Maybe this could help?
Hi, i had the same problem and i was going nuts with it. But i found a solution! As long as your digitizer still works, you press both up and down volume buttons at the same time for 3 seconds, and it will activate the talk back mode. You'll have to get used to it, because it's a bit finicky, but once you understand the mechanics of it, you connect your oneplus to a PC, through a USB cable, go to configurations, bluetooth & connections, USB options and select file transfer. Once you do that, you'll have access to your phone internal drive in the computer.
Hope this was helpfull!
Hey and thank you for your answer. Actually it sounds like a decent solution, but pressing the volume buttons did not turn on the talkback mode =\
p2p2020 said:
Hey and thank you for your answer. Actually it sounds like a decent solution, but pressing the volume buttons did not turn on the talkback mode =\
Click to expand...
Click to collapse
Uh, that sucks. It only works once the phone is unlocked. So if you did that, made sure that you volume is on, you are not connected to Bluetooth headphones or anything like that then I donno. You might have to convince a local repair shop to give you a loner screen to get your data out for a reduced price or something. Or try clicking blindly in the right spots. Or maybe somebody comes along with a better idea.
Android phones do not support external displays, right?
I don't know about the displays, but I'll go to a lab tomorrow because i ran out of ideas
thank you for your help, I appreciate your time mate :good:
Hi - wondering if anyone out there can think of a solutions to this...
So, my wife cracked her phone screen (Huawai P20) and bought a cheap phone to use short term while we worked out a replacement (Alcatel 1). When setting up the temporary phone, not all of the data from her P20 was install/copied, mainly because there's not enough storage space to hold it all.
Some of the data left on the P20 is really important (downloaded documents/files and pevious whatsapp history), so I was going to hook it up to a PC and grab all the data from it, but the biggest problem is she can't remember the unlock pattern. I know developer mode/USB debugging is not turned on, so I can't even get a PC/ADB to recognise it, plus I've had to connect it to a mouse and monitor (via HDMI/USB adapter) to even view/control the unlock screen.
I'm pretty sure that without the pattern we have little or no options, but was wondering if anyone knew the answers to the following:
Is there any way to unlock the phone using the old PIN that was set (she's confident she knows this)?
Is there a way to unlock using the finger print sensor (even though is says 'pattern required due to restart')
Should ADB list it as a device even though USB debigging is turned off and the phone is screen locked (currently does not list it, but I thought you could PIN unlock via ADB)
Does anyone know any other tools/options for accessiing the files on the phone.
Thanks is advance for any help!
Basically you can access Android's filesystem in ADB-mode or in MTP-mode: the latter should always be possible.
Even if USB Debuging is turned off and the screen is locked? Any tips on how to get the PC to see the device in MTP mode?
Thanks!
My wifey has a Huawei Y7 with HiSuite installed on Windows PC and HDB enabled on phone. As soon as she connects PC with phone over USB, confirms the verification code, phone gets mounted on PC as external USB-drive and thus visible in MTP-mode.
My guess is you have to take your Huawei to authorized service center and let them try to fix it.
Ah Ok. HiSuite asks for USB Debugging to be enabled first, which i can't do because it's locked. Thanks for you help anayway.