Related
Hello, i ported 4.4 OTA to all variants and now i'm going to post here the link and some things.
First of all, there is a little bug when enter to Settings/Security, but i'm going to fix it now, this is for impatients.
Features: All 4.4.2 OTA ported.
Fully RADIO support(No modem blobs changes)
Direct from Motorola OTA.
Download link: http://d-h.st/aHg
Installation:
FLASH CWM
WIPE DATA/FACTORY RESET
FLASH ROM
FLASH SU(Can be downloaded from koush website)
WIPE DALVIK.
ENJOY!
THANKS: Antiquezip for his OTA package
I'll add screenshots and more things to the post later, but now, enjoy all KK features!
So seeing as those of us who installed the original OTA can't flash a custom recovery, would we be able to downgrade back to 4.3 then flash CWM and then flash this zip? Will this also work with the US GSM AWS version is basically what I'm asking? I know you were working on getting this to the Global GSM version.
@josalaito you should credit antiquezip.
jmoore4294 said:
So seeing as those of us who installed the original OTA can't flash a custom recovery, would we be able to downgrade back to 4.3 then flash CWM and then flash this zip? Will this also work with the US GSM AWS version is basically what I'm asking? I know you were working on getting this to the Global GSM version.
Click to expand...
Click to collapse
(All variants)
Click to expand...
Click to collapse
Not sure about downgrading. Mixed results have been posted.
obvious said:
Not sure about downgrading. Mixed results have been posted.
Click to expand...
Click to collapse
Well. I know it says in the title "All variants". Guess I could just flash and find out. Downgrading was no problem. I gave it a shot just to make sure and it worked without a hitch. Was then able to re-flash the original OTA no problem.
Do we really need to wipe data if we come from stock 4.3 to 4.4.2?
josalaito said:
Hello, i ported 4.4 OTA to all variants and now i'm going to post here the link and some things.
First of all, there is a little bug when enter to Settings/Security, but i'm going to fix it now, this is for impatients.
Features: All 4.4.2 OTA ported.
Fully RADIO support(No modem blobs changes)
Direct from Motorola OTA.
Download link: http://d-h.st/aHg
Installation:
FLASH CWM
WIPE DATA/FACTORY RESET
FLASH ROM
FLASH SU(Can be downloaded from koush website)
WIPE DALVIK.
ENJOY!
I'll add screenshots and more things to the post later, but now, enjoy all KK features!
Click to expand...
Click to collapse
Thanks! Downloading now.
Brazilian Moto G Colors Edition (Dual Chip) XT1033. I'll post my feedback soon as possible.
Wi-Fi isn't working for me at the moment.
Sent a logcat already. Fingers crossed.
jmoore4294 said:
So seeing as those of us who installed the original OTA can't flash a custom recovery, would we be able to downgrade back to 4.3 then flash CWM and then flash this zip? Will this also work with the US GSM AWS version is basically what I'm asking? I know you were working on getting this to the Global GSM version.
Click to expand...
Click to collapse
jmoore..is everything wifi for you? Im trying to decide if I want to go this route or flash the original update..
plmiller0905 said:
jmoore..is everything wifi for you? Im trying to decide if I want to go this route or flash the original update..
Click to expand...
Click to collapse
Flashing it right now. In the process of setting it up.
Edit: Working good for now. Confirmed WiFi does not work. And "Settings" does FC when you attempt to enter "Security", but that was stated in the OP. Root is working. I flashed SuperSU after flashing the ROM and Xposed works perfectly. Please be aware that I am using a US GSM version. So if anyone coming here is looking for confirmation on this working for a Global GSM or other device outside of the US, I cannot confirm that.
OK, keymaster is added by motorola to firmware folder and i don't added to the rom, so this is the cause of the bugs.
josalaito said:
OK, keymaster is added by motorola to firmware folder and i don't added to the rom, so this is the cause of the bugs.
Click to expand...
Click to collapse
Just flashed rom + super su. Looking forward to keymaster zip
Here you have the workaround.
Flash without wipes, and should fix the problems.
http://d-h.st/wfS
The rom is suitable for 8gb and 16 gb both?
What about dual sim models?
josalaito said:
Here you have the workaround.
Flash without wipes, and should fix the problems.
http://d-h.st/wfS
Click to expand...
Click to collapse
So wifi is working fine??
The download is almost finishing here, but I need to unlock my bootloader.
Someone are already installed on a dual sim Moto G? I'm curious if both SIMs works or not.
If logcat doesn't lie, yes.
josalaito said:
Here you have the workaround.
Flash without wipes, and should fix the problems.
http://d-h.st/wfS
Click to expand...
Click to collapse
Settings still FC's and WiFi still doesn't work after flashing that zip.
josalaito said:
Here you have the workaround.
Flash without wipes, and should fix the problems.
http://d-h.st/wfS
Click to expand...
Click to collapse
Good timing Sideloaded and rebooting
jmoore4294 said:
Settings still FC's and WiFi still doesn't work after flashing that zip.
Click to expand...
Click to collapse
Mmm, please can you go with your file manager to firmware/image and see if you have a keymaster.XXX files?
Q&A for [ ROM ][ Feb 10 ] Stock Rooted XNPH05Q
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ ROM ][ Feb 10 ] Stock Rooted XNPH05Q. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
running fine, thank you for sharing! :good:
New to cyanogen, flashing etc. If i flash this rom, do i still keep all my settings/apps/data?
I have changed the dpi, do i need to revert back to stock dpi berøre updating to this ?
Hi I am a newbie and I just followed this guide http://forum.xda-developers.com/showthread.php?t=2788632 and rooted my phone. Today I check android and it says there was an incremental update, after downloading it I clicked install, the phone rebooted into TeamWin Recovery Project. First in order to install this update must I wipe my phone? I tried to install the update zip file in the /cache but it gave a failure, something to do with md5 file not found and something.
Just to thanks...
Thank you @Calkulin for your thread about the 05Q update!
(sorry to pollute here, but I can't reply into the topic...)
---------- Post added at 04:00 PM ---------- Previous post was at 03:47 PM ----------
xcoolgodx said:
Hi I am a newbie and I just followed this guide http://forum.xda-developers.com/showthread.php?t=2788632 and rooted my phone. Today I check android and it says there was an incremental update, after downloading it I clicked install, the phone rebooted into TeamWin Recovery Project. First in order to install this update must I wipe my phone? I tried to install the update zip file in the /cache but it gave a failure, something to do with md5 file not found and something.
Click to expand...
Click to collapse
Hi, just follow this topic: http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-xnph05q-t3027033/page16
---------- Post added at 04:05 PM ---------- Previous post was at 04:00 PM ----------
Exhale68 said:
New to cyanogen, flashing etc. If i flash this rom, do i still keep all my settings/apps/data?
Click to expand...
Click to collapse
Foolowing Calkulin's topic, nothing will be lost!
xcoolgodx said:
Hi I am a newbie and I just followed this guide http://forum.xda-developers.com/showthread.php?t=2788632 and rooted my phone. Today I check android and it says there was an incremental update, after downloading it I clicked install, the phone rebooted into TeamWin Recovery Project. First in order to install this update must I wipe my phone? I tried to install the update zip file in the /cache but it gave a failure, something to do with md5 file not found and something.
Click to expand...
Click to collapse
Exactly the same problem here.
néonaloj said:
Hi, just follow this topic: http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-xnph05q-t3027033/page16
Click to expand...
Click to collapse
I read the whole thread but there's nothing I can see there to help with this problem of the OTA not installing.
Jake. said:
Exactly the same problem here.
I read the whole thread but there's nothing I can see there to help with this problem of the OTA not installing.
Click to expand...
Click to collapse
I downloaded the actual file provided by Calkulin and not the default updater.
then when you install update / boot recovery install with the zip that you downloaded yourself and it works.
@jake: But why dont you just use the Calkulin's rooted rom? It worked fine for me, putting it into TWRP, first that zip, then the "extra", then SU. Wipe cache/Dalvik.
I hope I have understand well your question, English is not my language..
Ringer volume keep lowering itself do you have this issue or not??
THANKS!
Update work well and the color is back, finally. I'm very happy about that!
THANKS!
RE Question: Can I flash these over cm12 nightly?
Q: Can i Flash this ROM over my CM12/Other Lollipop ROM?
A: Yes youi can, However....
You will need to do a full Wipe!
Also Lollipop comes with a new Radio which bricks/breaks the Proximity sensor
in Android Versions preceding 5.0 meaning....
Any Versions of android before 5.0 is not fully compatible with the radio from Android 5.0+.
Symptom of using the Android 5.0 Radio with previous Versions of Android Results in
the proximity sensor registering as being blocked.
Therefore screen off gestures (V Flashlight, O Camera, < ǁ > Playback Controls) will NOT work.
Also while in a call, your phones display will always turn off, and will not turn on until the call has ended.
Unless you program a hardware button to end the call you will not be able to end calls,
your screen will be unresponsive until the party on the other end of your call has ended the call...
Flashing a rom will NOT change the radio.
you must fastboot flash the radio intended for Android 4.4.4 for this rom.
How to flash Stock Rooted XNPH05Q for OnePlus One
Hi, I am new to the Android world and am a novice.
I am using a China OnePlus One with XNPH25R ROM flashed by the shopkeeper, rooted with TWRP recovery. I would like to know if I could flash the new ROM Rooted XNPH05Q using TWRP, and if there are any Wipes I need to do before or after. Thank you.
installing 05Q on multirom
I'm running the latest cm12 official nightly and have multirom installed on my phone. Can I flash this ROM as my secondary ROM and flash the extras zip in the secondary ROM?
bean5 said:
Hi, I am new to the Android world and am a novice.
I am using a China OnePlus One with XNPH25R ROM flashed by the shopkeeper, rooted with TWRP recovery. I would like to know if I could flash the new ROM Rooted XNPH05Q using TWRP, and if there are any Wipes I need to do before or after. Thank you.
Click to expand...
Click to collapse
Only wipe cache/Dalvik. "Install" the rooted rom by TWRP + extras. Update Super SU, wipe cache/Dalvik.
It's done, nothing will be lost and you don't have to upgrade step by step, this is a full rom.
---------- Post added at 15:32 ---------- Previous post was at 15:23 ----------
dev_rush said:
I'm running the latest cm12 official nightly and have multirom installed on my phone. Can I flash this ROM as my secondary ROM and flash the extras zip in the secondary ROM?
Click to expand...
Click to collapse
Don't think so, not the same kernel, modem etc...
Hi !
I am new to android and running OTA 05Q. i was looking for a tutorial to install this ROM on my phone without wiping all data. I looked at the original thread but couldn't find something that wouldn't involve losing my apps etc. Thanks a lot for your help !
geriri said:
Hi !
I am new to android and running OTA 05Q. i was looking for a tutorial to install this ROM on my phone without wiping all data. I looked at the original thread but couldn't find something that wouldn't involve losing my apps etc. Thanks a lot for your help !
Click to expand...
Click to collapse
You won't loose anything, nor using Calkulin's rooted rom, nor using the OTA
download
why is my virus software blocking the download?
what's different on these images?
what is the meaning of that 2nd (XNPH05Q Radio, etc) image? it would be nice if there were description on the first post about images and what they have with them.
sent from phone via chrome (so it's hard to scroll previous chatter to find which one to take.
This ROM is awesome. I''m coming from stock CM11S and CM12 nightlies but was very unsatisfied with the functionality of the phone. Random restarts, wifi not working, camera taking odd pictures. Since friday I had no issues, all working fine.
Sample pic taken with CM12 nightly stock camera app, no filters.
I've put together some stock flashable TWRP zips which will install firmwares for the US996. Since this is a TWRP flashable ZIP this assumes you've already got access to TWRP. I use these to update or restore the stock image easily. Wiping data so far has not been required but if you experience issues you may want to consider it.
These zips flash every partition included in the latest firmware. If you want to err on the safe side (which is what I do before testing these) you could dump images of you current partitions to roll back to in case of an issue. (dd if=/dev/block/bootdevice/by-name/{partition} of=/external_sd/backup/{partition}.img). You'll find all partitions in the updater-script.
Download:
10f - SPL 2016-12-01 - Download (md5: 5c5241beb05385f1bb62cd9931d16675)
10h - SPL 2017-04-01 - Download (md5: 9516ecc55cc3b167154ab184fb419c4b)
10k - SPL 2017-09-01 - Download (md5: 075a5bae7201bc08cc3238a64fc9882a)
10l - SPL 2017-11-01 - Download (md5: 80560956009ac459cef5d4b48e934625)
10n - SPL 2017-11-01 - Download (md5: efbb74d3cc8e688cdabdf60e63a30792)
10o - SPL 2018-02-01 - Download (md5: e52e820b9a908e4b0c19727aadd113a6)
10p - SPL 2018-04-01 - Download (md5: d10f6b5b5e4372ff1577df2fe91830b0)
SPL = Security Patch Level
Instructions:
Boot into TWRP ("reboot recovery" from shell)
Put us99610*.zip onto /external_sd/
TWRP -> Install -> /external_sd/us99610*.zip
Install your desired root: Magisk or SuperSU
TWRP -> Reboot -> System
Your device may reboot a couple times and this is normal. You will then boot into the system.
What does it do?
Flashes partition images (skipping recovery) from the kdz - http://lg-firmwares.com/lg-us996-firmwares/
Moves /system/recovery-from-boot.p to /system/recovery-from-boot.bak to prevent stock recovery from being installed on boot
Wipes cache & dalvik-cache
Note
These firmwares are a mix between USA (Unlocked US996), UCL (US Cellular), and BPT (Brightpoint) but have not had problems running cross-variants. However, one thing I'd like to point out is an issue I saw reported by another user. They stated that after they flashed US Cellar US996 updates (10h/10k/10l) their Unlocked US996 device was being picked up as the US Cellular device when attempting to use the LG website bootloader unlock. This is most likely due to the US Cellular bootloader being flashed and the device reporting a US Cellular device ID. This hasn't caused any issues when your device has already been bootloader-unlocked but I would not suggest that users re-lock their bootloader when running this US Cellular firmware as you may risk running into problems unlocking. The same user had also reported that they just flashed the 10f kdz with LGUP to correct the problem but not a risk I'd like to see anyone take. Just a word of caution.
Special thanks to,
@bullghost for the kdz extractor (https://forum.xda-developers.com/showthread.php?t=2600575)
@Tilde88 for the updater-script template w/root (https://forum.xda-developers.com/v20/development/us996-nrd90m-modded-notsostock-rom-v5-1-t3526542)
Thanks for this! Just curious, is there an actual reason we would need to format data and factory reset? Isn't this just basically the same as updating, just more manually than taking the OTA? Like the same as extracting factory images and manually flashing them on Nexus devices?
jeston said:
Thanks for this! Just curious, is there an actual reason we would need to format data and factory reset? Isn't this just basically the same as updating, just more manually than taking the OTA? Like the same as extracting factory images and manually flashing them on Nexus devices?
Click to expand...
Click to collapse
I'm just not sure that if during the OTA update there are special steps to migrate data to be compatible with the new firmware. To err on the safe side I just suggested you format. Considering it's 7.0 -> 7.0 I don't see why there would be an issue leaving your data in place so if anyone tries it, definitely report back! I personally like starting fresh slate when upgrading.
McNutnut said:
I'm just not sure that if during the OTA update there are special steps to migrate data to be compatible with the new firmware. To err on the safe side I just suggested you format. Considering it's 7.0 -> 7.0 I don't see why there would be an issue leaving your data in place so if anyone tries it, definitely report back! I personally like starting fresh slate when upgrading.
Click to expand...
Click to collapse
Cool, I'll probably give it a try after work tomorrow. I'll let you know how it goes.
Thanks for this. Any word whether 10i that could get this treatment?
The_FNG said:
Thanks for this. Any word whether 10i that could get this treatment?
Click to expand...
Click to collapse
Has the unlocked US996 gotten 10i? I was only aware of 10f. That is the only .kdz I've got access to.
Alright, finally flashed it without wiping anything. Went just fine :good:
jeston said:
Alright, finally flashed it without wiping anything. Went just fine :good:
Click to expand...
Click to collapse
Great to hear!
Link is dead
Sent from my LG-US996 using Tapatalk
mr pnut said:
Link is dead
Sent from my LG-US996 using Tapatalk
Click to expand...
Click to collapse
Working for me. Anyone else having issues?
McNutnut said:
Working for me. Anyone else having issues?
Click to expand...
Click to collapse
Ok I got it bro it's working thru chrome not thru Tapatalk app thx bud
Sent from my LG-US996 using Tapatalk
Just ran this myself-no data wipe, just followed the rest of the directions. Worked like a charm, no problems. THANK YOU!!
Added 10h. This time without the automatic root to allow users to install their own preference (SuperSU or MagiskSU).
McNutnut said:
Added 10h. This time without the automatic root to allow users to install their own preference (SuperSU or MagiskSU).
Click to expand...
Click to collapse
Awesome... since I'm new here, may I ask if there's anything that a KDZ can do that this can't? Other than "prepare the phone for a warranty return" or "sell on Swappa as stock" ??? As you know from the other thread... I'm trying to recover from some problems I was having, and I suspect that I have some corruption. I need to burn it down and hope it rises from the ashes.
DrPhant0m said:
Awesome... since I'm new here, may I ask if there's anything that a KDZ can do that this can't? Other than "prepare the phone for a warranty return" or "sell on Swappa as stock" ??? As you know from the other thread... I'm trying to recover from some problems I was having, and I suspect that I have some corruption. I need to burn it down and hope it rises from the ashes.
Click to expand...
Click to collapse
There are three files in the KDZ which aren't used in the zip: "BackupGPT", "PrimaryGPT", and "recovery". The first two appear to be the partition table structure and the last being the stock recovery. So if your partition layout got messed up, LGUP+KDZ would be able to fix that where the zip won't. I don't know for sure what else LGUP has to offer on top of that, but from what it sounds like, LGUP + KDZ can restore a bricked phone to stock. I've never had to use LGUP myself...fortunately.
What are the MD5 hashes of the zip files? I downloaded the US996-10h file, and tried to flash it, and TWRP says it's invalid. Did I do something wrong?
DrPhant0m said:
What are the MD5 hashes of the zip files? I downloaded the US996-10h file, and tried to flash it, and TWRP says it's invalid. Did I do something wrong?
Click to expand...
Click to collapse
I've got an MD5 of 9516ecc55cc3b167154ab184fb419c4b on 10h. I went ahead and downloaded the file from the link and it matches the source file I uploaded. Possibly a bad download? Give it another shot if the MD5 doesn't match. If it does match...let me know ha.
CONFIRMED! successfully flashed your US996-10h package, followed by Magisk 11.6 and it's booted and rooted! thanks for all your work and help! btw, Magisk v13.0 (0b4baad) also works in case anyone was curious. 12.0 seems to be fscked for all LGV20...
EDIT: with 10d, 10f, and now 10h whenever I reboot the screen brightness always resets to 100% even after I've set it to auto. does this happen to anyone as well?
McNutnut said:
I've got an MD5 of 9516ecc55cc3b167154ab184fb419c4b on 10h. I went ahead and downloaded the file from the link and it matches the source file I uploaded. Possibly a bad download? Give it another shot if the MD5 doesn't match. If it does match...let me know ha.
Click to expand...
Click to collapse
Yep. Bad download. It was 0.2GB shy.
I flashed the new one... and I can't thank you enough that it actually worked! Magisk v13 is installed and SafetyNet passes! I really like some of the bonuses that WETA ROM offered (bandwidth monitor and other battery/clock choices)... but I might stick with this for a while just because I've tried so long to get that crazy issue fixed.
A TWRP-flashable solution was exactly what I needed because LGUP was *not* working for me. It wouldn't even run on my PC, let alone get to the point where it would recognize my phone and flash a full fw.
:good::good::good:I wish I could thank the OP 1000x.:good::good::good:
nice, thanks for this. i'm gonna flash to just go back to a stock rooted 10f rom.
---------- Post added at 03:53 PM ---------- Previous post was at 03:49 PM ----------
wait, this won't wipe internal storage or anything right?
Hi, Is it possible to go back to 4.4.4 from 6.0.1?
i think its possible , with cm11s. just try it, and let us know ! dont forget to backup , just incase
its CM13 back to CM11. Which software should I use. Read a lot of topics but, which one is for my phone?
I think you'll have to download 44s firmware and install it before you proceed with the rom.
enshiu said:
Hi, Is it possible to go back to 4.4.4 from 6.0.1?
Click to expand...
Click to collapse
You can! There are multiple way to do it:
First of all, you have the option to dual boot your phone with 4.4.4 using multirom or EFIdroid (not sure about EFIdroid)
You can just flash the full 4.4.4 zip as secondary rom, however! you NEED to flash the 4.4.4 modem in order to make the proximity sensor to work.
You can also just flash 4.4.4 as main ROM without using multirom or EFIdroid, make sure you wipe all the partitions first, then flash the full rom.
There is also the QHS_Bulk way.
First restore your phone using the color.zip in this guide.
When on color os (the chinese 4.4.4) you can fastboot flash the cm11s rom over it (step 4 in the guide, but make sure you use the cm11s rom).
Have fun!
You can but you need to flash KitKat firmware for oneplus one, also you need to find a compatible recovery menu to flash the ROM and firmware. Be sure to keep a backup of anything goes wrong
try this https://forums.oneplus.net/threads/how-to-back-to-stock-repair-system.225170/#post-8737053 , it might help.
Thanks all for the replies. I am a complete noob at this.
So what do I need to do exactly. I know my mums phone still has 4.4.4. so it is possible.
I have backup everything now so not afraid to lose any data anymore.
enshiu said:
Thanks all for the replies. I am a complete noob at this.
So what do I need to do exactly. I know my mums phone still has 4.4.4. so it is possible.
I have backup everything now so not afraid to lose any data anymore.
Click to expand...
Click to collapse
1. unlock bootloader
2. install twrp
3. flash new rom
Possible, but stupid idea.
You can just flash stock COS from fastboot
Choose what you want, I suggest the glorious 44s
https://forums.oneplus.net/threads/mirrors-for-official-cyanogen-roms-ota-updates.141825/
PS
That ROM was the most stable with KK back in the days, but on some devices it needs a custom kernel to fix ghost touches.
Azhar_Fahry said:
1. unlock bootloader
2. install twrp
3. flash new rom
Click to expand...
Click to collapse
sorry I am completely noob at this
Where to find the files for a 1+1 phone?
enshiu said:
sorry I am completely noob at this
Where to find the files for a 1+1 phone?
Click to expand...
Click to collapse
Follow this until you install twrp:
https://forum.xda-developers.com/oneplus-one/help/poor-call-quality-t3586537/post71782642
Then go here:
https://forums.oneplus.net/threads/mirrors-for-official-cyanogen-roms-ota-updates.141825/
And download the signed flashable zip you want, and install it from twrp.
seanwlk said:
Follow this until you install twrp:
https://forum.xda-developers.com/oneplus-one/help/poor-call-quality-t3586537/post71782642
Then go here:
https://forums.oneplus.net/threads/mirrors-for-official-cyanogen-roms-ota-updates.141825/
And download the signed flashable zip you want, and install it from twrp.
Click to expand...
Click to collapse
By the way I am in twrp but, when I try flashing CM11 it says:
could not find meta-inf/com/google/android/update-binary
How to install twrp?
Oneplus CS has flashed mine back to 5.0.1 android with CM13. If I flash back 44S Will the android version go back aswell?
Thanks all got it reflashed to Kitkat and done now. Was stuck at step 4,5 and 6 while I only need 7,8 and 9.
enshiu said:
Thanks all got it reflashed to Kitkat and done now. Was stuck at step 4,5 and 6 while I only need 7,8 and 9.
Click to expand...
Click to collapse
Yes sorry i forgot to explain better, but I though was implicit ?
Stock Android 7.0 (Nougat) for the Moto X Pure 2015 XT1575 US NPH25.200-22
TWRP Recovery Image (Includes /boot and /system only)
**Factory reset after restore is advised.**
https://drive.google.com/drive/folders/0B2lKWOIH0bTqc29NbVNWWWhsYVE?usp=sharing
**Not tested coming straight from stock 6.0 MPH24.49-18-16.**
I did an incremental OTA upgrade from stock 6.0 MPH24.49-18-8.
Use at your own risk. If you have TWRP installed your warranty is void anyway. I'm not responsible for bricking your device.
worked great for me 18-16 thanks really appropriate the work
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
the-light said:
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
Click to expand...
Click to collapse
Yes. Root is nonconsequential. You really just need twrp.
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
newHere:) said:
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
Click to expand...
Click to collapse
No Nougat modem is available until the flashable (non OTA) full stock 7.0 rom is made available from Motorola. This is not likely to happen. No issues have been mentioned running this update on a 6.0 modem. Not sure what the advantages are honestly. I never had problems with bt, wifi, or calls with the 6.0 modem firmware.
Create a backup beforehand and you can always go back to it.
hi i noob, i speak spanish.
I have moto x pure clark xt1575, android 6 no root, i install twrp an unlock bootloader.
I try to install this "ota" room, but fail. i restore back up and now the phone follow work
mphs24.49-18-16.
Need help how instal android 7 official, or only way custom room "lineage 14"
Thanks.
Can I flash this over Lineage OS 14.1 after a full wipe?
acoupleofdroids said:
worked great for me 18-16 thanks really appropriate the work
Click to expand...
Click to collapse
Hi talk about u experience
Greetings, it counts as you did, I have android 6.0 mphs24.49-18-16 and I can not update. Phone with bootloader unlocked and with twrp, no root
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
bussemac said:
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
Click to expand...
Click to collapse
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Will this work with XT1572? Just confirming.
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
stevejohnson42 said:
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Click to expand...
Click to collapse
kelru2000 said:
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
Click to expand...
Click to collapse
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
bussemac said:
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
Click to expand...
Click to collapse
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
ptn107 said:
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
Click to expand...
Click to collapse
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
bussemac said:
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
Click to expand...
Click to collapse
Thankfully the 7.0 stock firmware is available now. I wiped and clean flashed it and it works perfectly.
https://forum.xda-developers.com/moto-x-style/general/xt1575-moto-x-pure-edition-factory-t3704142
the link is dead
someone can help, sharing a new link? thank you