Database Info

Flashing problems

OK guys let me tell you about my issue's
I'm using TWRP 2.7.1.0 (Tried 2.7.0.2 no difference) S-off, Unlocked, latest firmware from Santods files. The phone works fine with Sense ROMS but for the life of me I can't flash a GPE ROM. They fail every time. Santod tried to help me out the best he could by having me replace the Boot.img from the ROM I was flashing thinking that I was on a secure Boot image (And I may be but I replaced it and they still won't flash). Mr. Jaydee82 also modified a ROM for me to try out (although I'm not sure exactly what he did to it) and it wouldn't Flash properly either. When I try to flash these ROMs it will appear to flash properly and then they will go to the bootscreen and just sit there and churn. Depending on the ROM some will time out and power down the device and some will just sit there forever until I do a virtual battery pull. I'm freaking desperate to find out what is going on with this device and I don't feel right bugging Santod so I decided to post this in hope of more ideas about what could possibly be going on with my device. Any and all help greatly appreciated!!!
Thanks!

Duckman_UF said:
OK guys let me tell you about my issue's
I'm using TWRP 2.7.1.0 (Tried 2.7.0.2 no difference) S-off, Unlocked, latest firmware from Santods files. The phone works fine with Sense ROMS but for the life of me I can't flash a GPE ROM. They fail every time. Santod tried to help me out the best he could by having me replace the Boot.img from the ROM I was flashing thinking that I was on a secure Boot image (And I may be but I replaced it and they still won't flash). Mr. Jaydee82 also modified a ROM for me to try out (although I'm not sure exactly what he did to it) and it wouldn't Flash properly either. When I try to flash these ROMs it will appear to flash properly and then they will go to the bootscreen and just sit there and churn. Depending on the ROM some will time out and power down the device and some will just sit there forever until I do a virtual battery pull. I'm freaking desperate to find out what is going on with this device and I don't feel right bugging Santod so I decided to post this in hope of more ideas about what could possibly be going on with my device. Any and all help greatly appreciated!!!
Thanks!
Click to expand...
Click to collapse
What did you use to s-off; firewater or sunshine? Are you able to flash/boot AOSP roms? Did you take the 1.55.605.2 OTA before?

krazie1 said:
What did you use to s-off; firewater or sunshine? Are you able to flash/boot AOSP roms? Did you take the 1.55.605.2 OTA before?
Click to expand...
Click to collapse
I used Firewater I'm able to Flash all of the Sense ROM's not sure if they are considered AOSP. Give me an example of one and I'll try it. I'm not 100% sure if I took the OTA update before I Rooted and S-offed/unlocked the device but I think I did. I Flashed Santods Nobootimg firmware via ADB to be sure I was on the latest firmware. I know my radios were up to date before doing this but I wasn't sure about the FW so I flashed it. Flashed fine, didn't need to flush again, flashed fine first time.

Duckman_UF said:
I used Firewater I'm able to Flash all of the Sense ROM's not sure if they are considered AOSP. Give me an example of one and I'll try it. I'm not 100% sure if I took the OTA update before I Rooted and S-offed/unlocked the device but I think I did. I Flashed Santods Nobootimg firmware via ADB to be sure I was on the latest firmware. I know my radios were up to date before doing this but I wasn't sure about the FW so I flashed it. Flashed fine, didn't need to flush again, flashed fine first time.
Click to expand...
Click to collapse
I'll post a link to a aosp ROM but first can you link me to the firmware file you flashed?

krazie1 said:
I'll post a link to a aosp ROM but first can you link me to the firmware file you flashed?
Click to expand...
Click to collapse
4th one down and this was per Santod's instuction so I'm sure it's good.
http://www.androidfilehost.com/?w=files&flid=13966

Duckman_UF said:
4th one down and this was per Santod's instuction so I'm sure it's good.
http://www.androidfilehost.com/?w=files&flid=13966
Click to expand...
Click to collapse
Alright so you flashed it in bootloader right like this video?
http://youtu.be/e21qb7iZAOo
Here is a aosp ROM cm11 download the 20140801 build wipe and flash.
https://download.cyanogenmod.org/?device=m8

krazie1 said:
Alright so you flashed it in bootloader right like this video?
http://youtu.be/e21qb7iZAOo
Here is a aosp ROM cm11 download the 20140801 build wipe and flash.
https://download.cyanogenmod.org/?device=m8
Click to expand...
Click to collapse
Yes, ADB Fastboot Hboot...exactly as video instructed. No problems at all.
I'll give it a shot!

krazie1 said:
Alright so you flashed it in bootloader right like this video?
http://youtu.be/e21qb7iZAOo
Here is a aosp ROM cm11 download the 20140801 build wipe and flash.
https://download.cyanogenmod.org/?device=m8
Click to expand...
Click to collapse
Is a Gapps package needed for this ROM. Ive used Cyanogen ROM's before just not on this Phone.

Duckman_UF said:
Yes, ADB Fastboot Hboot...exactly as video instructed. No problems at all.
I'll give it a shot!
Click to expand...
Click to collapse
Forgot to link the GAPPs you need these for all AOSP roms, download and flash right after CM11
https://goo.im/gapps/gapps-kk-20140606-signed.zip/

krazie1 said:
Forgot to link the GAPPs you need these for all AOSP roms, download and flash right after CM11
https://goo.im/gapps/gapps-kk-20140606-signed.zip/
Click to expand...
Click to collapse
Thats what I thought..Thanks! About to dl Gapps and give it a shot.

krazie1 said:
Forgot to link the GAPPs you need these for all AOSP roms, download and flash right after CM11
https://goo.im/gapps/gapps-kk-20140606-signed.zip/
Click to expand...
Click to collapse
Yep flashed fine...no problems.

Duckman_UF said:
Yep flashed fine...no problems.
Click to expand...
Click to collapse
OK then, did you try both GPE ROMs for the vzw variant? Download the newest version of sinlessrom and wipe advanced (cache, dalvik cache, data & system) in TWRP.
http://www.androidfilehost.com/?fid=23578570567721616

krazie1 said:
OK then, did you try both GPE ROMs for the vzw variant? Download the newest version of sinlessrom and wipe advanced (cache, dalvik cache, data & system) in TWRP.
http://www.androidfilehost.com/?fid=23578570567721616
Click to expand...
Click to collapse
Already tried...Various Roms, various versions, 2 versions of TWRP (As stated) Aroma, non Aroma...They all just sit there and churn away on the boot screen or power down the device. I always wipe in that fashion

Man I'm out of ideas, I really want to help but can't think of anything. I'll still look and see if I can find anything.

krazie1 said:
Man I'm out of ideas, I really want to help bit can't think of anything. I'll still look and see if I can find anything.
Click to expand...
Click to collapse
I really appreciate your help. Santod and me went back and forth via PM a few times and JayDee modified his Rom for me and now you. IDK....I'm dumbfounded. If you think of anything let me know. I'll just stay on AOSP for now. Always liked Cyanogen's stuff anyway, just never even thought about them since their ROMS are not in the forums. They used to be for my various other phones. Never really though about them not being on XDA until we did this just now. Thanks again for you time and help!!!

Duckman_UF said:
I really appreciate your help. Santod and me went back and forth via PM a few times and JayDee modified his Rom for me and now you. IDK....I'm dumbfounded. If you think of anything let me know. I'll just stay on AOSP for now. Always liked Cyanogen's stuff anyway, just never even thought about them since their ROMS are not in the forums. They used to be for my various other phones. Never really though about them not being on XDA until we did this just now. Thanks again for you time and help!!!
Click to expand...
Click to collapse
Yeah cm11 is what I'm currently using, it recently had a speakerphone issue but its been fixed since 7/30. The only AOSP ROMs that have incorporated the fix are cm11, liquidsmooth & aokp. Here is the section for all the aosp ROMs they are universal so means 1 zip for all HTC One M8 variants.
http://forum.xda-developers.com/htc-one-m8/orig-development

Have you tried a RUU?

young0ne said:
Have you tried a RUU?
Click to expand...
Click to collapse
What do you mean? I put the phone in RUU when when flashing the firmware with ADB??

Duckman_UF said:
What do you mean? I put the phone in RUU when when flashing the firmware with ADB??
Click to expand...
Click to collapse
it put stock back on the phone just like it was new out of box. it re installs everything from factory.

Thanks!
GNU con Linux

Install I9505 TW 5.0 on I337M

Few days ago I was looking for a I9505 based Rom for T-Mobile M919. Found this thread by @muniz_ri
Today I was looking for the same for the I337M & Found that M919 kernals are compatible with I337.
So I tested the M919 guide by @muniz_ri on I337M & It wokred
I tried the I9505 leak based ROM. I9505 Back Edition Official ROM will also works.
Install TWRP & follow this guide
muniz_ri said:
Here is a copy of my pre-rooted backup of the firmware. Thanks to @ausdim for his twz kernel required to fix wifi on the T-Mobile M919 (already built into the backup).
Instructions:
1. Extract the I9505XXUHOB7_Stock_Rooted_Backup folder from the .rar and place that folder into your TWRP backups folder, i.e: ext-sdcard/TWRP/BACKUPS/xxxxxx (The name of your backups folder may vary. If a backups folder does not already exist you must first create a backup using TWRP's "Backup" function before proceeding).
2. From TWRP recovery perform an "Advanced Wipe" and wipe Dalvik, System, Data, and Cache.
3. From the Main Menu press "Restore" and restore the I9505XXUHOB7_Stock_Rooted_Backup .
4. Reboot. Done!
Tip: For blazing fast speed disable animations from Developer Options.
Click to expand...
Click to collapse
Note : Mobile data wasn't stable for me. Most of the time It showed EDGE. Network Mode selection won't work properly. Couldn't select WCDMA Only. I goes back to Auto mode.
Credit - @munzi_ri

BarakOsama said:
Few days ago I was looking for a I9505 based Rom for T-Mobile M919. Found this thread by muniz_ri
Today I was looking for the same for the I337M & Found that M919 kernals are compatible with I337.
So I tested the M919 guide by muniz_ri on I337M & It wokred
I tried the I9505 leak based ROM. I9505 Back Edition Official ROM will also works.
Click to expand...
Click to collapse
Nevermind, it has the kernel in the backup. Will this work with Safestrap?
EDIT: It does not. Boot crashes into stock recovery

Apoplectic1 said:
Nevermind, it has the kernel in the backup. Will this work with Safestrap?
EDIT: It does not. Boot crashes into stock recovery
Click to expand...
Click to collapse
I not familiar with Safestrap..

BarakOsama said:
I not familiar with Safestrap..
Click to expand...
Click to collapse
It's basically a modified TWRP recovery for those of us with NB1 and newer modems, as the OTA to that one effectively locked the bootloader, and no one has managed to crack it since then. It uses an exploit to allow for the flashing of ROMs but does not touch the kernel or boot image.
If the kernel for this ROM is available to ODIN, it may work.

I guess this is the kernel.
http://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/tw-lollipop-kernel-v1-t3024631
Apoplectic1 said:
It's basically a modified TWRP recovery for those of us with NB1 and newer modems, as the OTA to that one effectively locked the bootloader, and no one has managed to crack it since then. It uses an exploit to allow for the flashing of ROMs but does not touch the kernel or boot image.
If the kernel for this ROM is available to ODIN, it may work.
Click to expand...
Click to collapse

BarakOsama said:
I guess this is the kernel.
http://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/tw-lollipop-kernel-v1-t3024631
Click to expand...
Click to collapse
Unfortunately we cannot flash it unless we are still on old modems. Safestrap will not touch the kernel, and TWRP will not work on our phones due to the bootloader being locked. In order to change the kernel, we have to use ODIN, which uses a different file type (tar.md5).

Apoplectic1 said:
Unfortunately we cannot flash it unless we are still on old modems. Safestrap will not touch the kernel, and TWRP will not work on our phones due to the bootloader being locked. In order to change the kernel, we have to use ODIN, which uses a different file type (tar.md5).
Click to expand...
Click to collapse
Wait then, I'll dump the boot.img & build a tar

BarakOsama said:
Wait then, I'll dump the boot.img & build a tar
Click to expand...
Click to collapse
Sweet! You'll have at least one guiana pig phone once you do

Here is the odin flashable kernel
http://www.mediafire.com/download/g2gerx73htahz64/ausdim-kernel-v2.tar.zip

BarakOsama said:
Here is the odin flashable kernel
http://www.mediafire.com/download/g2gerx73htahz64/ausdim-kernel-v2.tar.zip
Click to expand...
Click to collapse
Fingers crossed...
---------- Post added at 04:01 PM ---------- Previous post was at 03:52 PM ----------
BarakOsama said:
Here is the odin flashable kernel
http://www.mediafire.com/download/g2gerx73htahz64/ausdim-kernel-v2.tar.zip
Click to expand...
Click to collapse
No go.

Apoplectic1 said:
Fingers crossed...
---------- Post added at 04:01 PM ---------- Previous post was at 03:52 PM ----------
No go.
Click to expand...
Click to collapse

BarakOsama said:
Click to expand...
Click to collapse
It says Authorization fail, I'm guessing the tar file did not have the proper binary to pass the bootloader, since it's locked.
Thanks for trying man.

Apoplectic1 said:
It says Authorization fail, I'm guessing the tar file did not have the proper binary to pass the bootloader, since it's locked.
Thanks for trying man.
Click to expand...
Click to collapse
M919 was on 4.4.4. But I337M was on 4.3 bootloader I think.
So that's might be the reason I got succeed

BarakOsama said:
M919 was on 4.4.4. But I337M was on 4.3 bootloader I think.
So that's might be the reason I got succeed
Click to expand...
Click to collapse
for us with locked bootloaders im on the s4 active at&t the odin file must have Samsung signature and at&t if I remember right

This won't work on AT&T I337, only the I337M which is unlocked. Android 5.0 is not compatible with any of the kernels we can flash, and kernels packaged into tars only flash if you can sign the package, and the kernel also needs to be signed for the bootloader to accept it. No Safestrap users can use this. Anyone with a normal custom recovery can.

Ah! This is great, I've been waiting to confirmation that this works with the i337M. I wasn't willing to test this myself. Which ROM was most stable between the two? Have you noticed any issues other than mobile data? Which ROM suffered from mobile data issues?
Also, were these ROMs official releases? Or just leaks?

Thanks op. I tried this on my canadian i337m and it worked..now i have lollipop..just few isuues....my LTE doesnt work at all..i still get mobile network..but only 4g...other thing...my sd card gets unmounted by itself randomly... upgraded yesterday night..so still keeping an eye for other issues.. thanks

studystand said:
Ah! This is great, I've been waiting to confirmation that this works with the i337M. I wasn't willing to test this myself. Which ROM was most stable between the two? Have you noticed any issues other than mobile data? Which ROM suffered from mobile data issues?
Also, were these ROMs official releases? Or just leaks?
Click to expand...
Click to collapse
i just tried the Black Edition Rom on my i337m Using Odin and it was not good. Not sure why...

Neikosr0x said:
i just tried the Black Edition Rom on my i337m Using Odin and it was not good. Not sure why...
Click to expand...
Click to collapse
ya I get the same message when i try to flash using odin. the method in op worked for me...but i still cant flash the new rom thru odin....
OP...how can i flash the new rom for i9505 (not black or leaked) using your method....??

sunnyzip said:
ya I get the same message when i try to flash using odin. the method in op worked for me...but i still cant flash the new rom thru odin....
OP...how can i flash the new rom for i9505 (not black or leaked) using your method....??
Click to expand...
Click to collapse
i managed to flash the TW 5.0.1 using Odin but, my wifi doesn't work anymore...

Flashable KK ROM Computerfreek274_4.4.4_KK Deodexed, Root, Tether, DeBloated,12/10/15

Computerfreek274 Stock Android KK 4.4.4 ROM​
This is a flashable ROM with twrp. I will not be updating or supporting this ROM.​
Please Read: If somehow this ROM or any of it's software kills your phone I am in no way to be help responsible for it or any data loss backup your data.
Based on the last STOCK .4.4.4 There was before lollipop.
Tether/Hotspot
Root
Deodexed
No Bloatware
No Tweaks or any other mods have been done.
Download Here
You must update/Downgrade radio.
fastboot flash radio radio.img or you can go to install under twrp and switch it to .img and flash the radio.img that way.​Download Radio.img here​
Please remember I will not support or help in anyway with this ROM me and my son just putting it out there in case someone like to play around with a KK ROM that is deodexed and can be themed. This ROM has been tested and it boots up with no boot animation. Also after it boots you will get a msg that Motorola software will ask you to to downgrade sensor firmware will be removed/Downgraded.
I will keep this forum open for users to use. I may pop in from time to time. Please remember no PM's about this ROM I will not give support for this ROM I am way to busy to give support for this.
​

Tried flashing this last night. went fine, but WiFi will not stay on. 4g works fine though. It turns on, but right back off. If I remember correctly this is something with radio, since I am downgrading? Google didn't have any answers that I could find. Anyone care to chime in?

mikelikesbikes said:
Tried flashing this last night. went fine, but WiFi will not stay on. 4g works fine though. It turns on, but right back off. If I remember correctly this is something with radio, since I am downgrading? Google didn't have any answers that I could find. Anyone care to chime in?
Click to expand...
Click to collapse
Yeah sorry I forgot you do need to downgrade radio. I think firstEncounter had and still may have his radios for KK up. If not I will try and get a KK radio .img pack up soon.

computerfreek274 said:
Yeah sorry I forgot you do need to downgrade radio. I think firstEncounter had and still may have his radios for KK up. If not I will try and get a KK radio .img pack up soon.
Click to expand...
Click to collapse
Have been looking through his threads, but I couldn't find the radios for KK. Entirely possible I looked at them and didn't see them however.

mikelikesbikes said:
Have been looking through his threads, but I couldn't find the radios for KK. Entirely possible I looked at them and didn't see them however.
Click to expand...
Click to collapse
Yeah sorry been crazy busy! I will try and get them to you asap. Thing you just need the radio. You can just download a stock 4.4.4 unzip it and grab the radio.img out of it.

computerfreek274 said:
Yeah sorry been crazy busy! I will try and get them to you asap. Thing you just need the radio. You can just download a stock 4.4.4 unzip it and grab the radio.img out of it.
Click to expand...
Click to collapse
No need to apologize. Is it as simple as flash rom then fastboot KK radio image (or possibly Flashify)?

mikelikesbikes said:
No need to apologize. Is it as simple as flash rom then fastboot KK radio image (or possibly Flashify)?
Click to expand...
Click to collapse
Twrp under install you can switch it from zip to img and flash .img also.

Having trouble finding the KK modem. Would downloading stock KK firmware from Motorola then extracting the modem be something you would suggest? If KK firmware is still available. Just prefer the looks of KK over LP.

mikelikesbikes said:
Having trouble finding the KK modem. Would downloading stock KK firmware from Motorola then extracting the modem be something you would suggest? If KK firmware is still available. Just prefer the looks of KK over LP.
Click to expand...
Click to collapse
Download this unzip and flash radio only with fastboot or twrp https://mega.nz/#!wU8DlLxK!sETqKOrPY33XDWdDLj5XA8_R-f9m3u3rlFA7z_N9-BE

mikelikesbikes said:
Having trouble finding the KK modem. Would downloading stock KK firmware from Motorola then extracting the modem be something you would suggest? If KK firmware is still available. Just prefer the looks of KK over LP.
Click to expand...
Click to collapse
I updated OP I put the radio.img up for downloads. I tested this last night and seems to be working just fine.
Give it five more minutes to upload.

Which one has the best battery life in
kitkat rom Or LP rom ??

computerfreek274 said:
I updated OP I put the radio.img up for downloads. I tested this last night and seems to be working just fine.
Give it five more minutes to upload.
Click to expand...
Click to collapse
I found what was labeled as Droid Turbo stock KK firmware the other day online. I flashed your KK ROM and I extracted the radio.img from the KK firmware I downloaded and flashed it using Flashify. Decided to reboot before I checked WiFi and all I had was bootloader when it rebooted. Had to unbrick and start over. Been away from home and my laptop for the holidays so I will give your method a go when I get home. Thanks.

Qutayba Khader said:
Which one has the best battery life in
kitkat rom Or LP rom ??
Click to expand...
Click to collapse
They're both great, I just prefer the looks of KK.

computerfreek274 said:
I updated OP I put the radio.img up for downloads. I tested this last night and seems to be working just fine.
Give it five more minutes to upload.
Click to expand...
Click to collapse
I tried to flash radio.img in TWRP and I get the option "boot" or "recovery". Both of which fail to flash. So not sure what to do.

mikelikesbikes said:
I tried to flash radio.img in TWRP and I get the option "boot" or "recovery". Both of which fail to flash. So not sure what to do.
Click to expand...
Click to collapse
Then use "fastboot flash radio radio.img" from bootloader.

on 4.4.4 now thanks for the ROM dude much appericated but now when i go in bootloader baseband it shows nothing is this normal? i already flashed the radios..

Where can we find the newer radio to flash if we want to go back to 5.1?

decimeter said:
Where can we find the newer radio to flash if we want to go back to 5.1?
Click to expand...
Click to collapse
http://forum.xda-developers.com/droid-turbo/development/droid-turbo-xt1254-bootloader-radio-t3259327

munchy_cool said:
http://forum.xda-developers.com/droid-turbo/development/droid-turbo-xt1254-bootloader-radio-t3259327
Click to expand...
Click to collapse
Thank you!

How would we add a boot animation?

[XT1575] TWRP Recovery Image for Stock MXP 7.0 Nougat NPH25.200-22

Stock Android 7.0 (Nougat) for the Moto X Pure 2015 XT1575 US NPH25.200-22
TWRP Recovery Image (Includes /boot and /system only)
**Factory reset after restore is advised.**
https://drive.google.com/drive/folders/0B2lKWOIH0bTqc29NbVNWWWhsYVE?usp=sharing
**Not tested coming straight from stock 6.0 MPH24.49-18-16.**
I did an incremental OTA upgrade from stock 6.0 MPH24.49-18-8.
Use at your own risk. If you have TWRP installed your warranty is void anyway. I'm not responsible for bricking your device.

worked great for me 18-16 thanks really appropriate the work

Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance

the-light said:
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
Click to expand...
Click to collapse
Yes. Root is nonconsequential. You really just need twrp.

Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?

newHere:) said:
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
Click to expand...
Click to collapse
No Nougat modem is available until the flashable (non OTA) full stock 7.0 rom is made available from Motorola. This is not likely to happen. No issues have been mentioned running this update on a 6.0 modem. Not sure what the advantages are honestly. I never had problems with bt, wifi, or calls with the 6.0 modem firmware.
Create a backup beforehand and you can always go back to it.

hi i noob, i speak spanish.
I have moto x pure clark xt1575, android 6 no root, i install twrp an unlock bootloader.
I try to install this "ota" room, but fail. i restore back up and now the phone follow work
mphs24.49-18-16.
Need help how instal android 7 official, or only way custom room "lineage 14"
Thanks.

Can I flash this over Lineage OS 14.1 after a full wipe?

acoupleofdroids said:
worked great for me 18-16 thanks really appropriate the work
Click to expand...
Click to collapse
Hi talk about u experience
Greetings, it counts as you did, I have android 6.0 mphs24.49-18-16 and I can not update. Phone with bootloader unlocked and with twrp, no root

I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.

bussemac said:
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
Click to expand...
Click to collapse
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -

Will this work with XT1572? Just confirming.

This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
stevejohnson42 said:
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Click to expand...
Click to collapse

kelru2000 said:
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
Click to expand...
Click to collapse
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!

bussemac said:
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
Click to expand...
Click to collapse
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.

ptn107 said:
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
Click to expand...
Click to collapse
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.

bussemac said:
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
Click to expand...
Click to collapse
Thankfully the 7.0 stock firmware is available now. I wiped and clean flashed it and it works perfectly.
https://forum.xda-developers.com/moto-x-style/general/xt1575-moto-x-pure-edition-factory-t3704142

the link is dead
someone can help, sharing a new link? thank you

[H910][Oreo][Stock][Rooted] AT&T LG V20 Stock Oreo rooted flashable zip

Good Morning
New: Well AT&T updated us to Sept Security patch
here's the new Stock rooted rom > H910_20h_Oreo_full_rooted.zip > https://www.androidfilehost.com/?fid=1322778262904015326
Tested by @darkknight200
i dirty flashed over the 20g rooted setup. It booted up fine and works like normal.
Now have to debloat att apps and restore twrp. This time i used twrp app to restore twrp right in system and it worked properly. Saves the hassle to go into fastboot to push twrp.
All in all those are minor inconveniences, The zip is fine.
Thanks allot man.
Click to expand...
Click to collapse
After @NotYetADev posted his VS995 rooted Oreo We decided to give it a try on the H910.
It's not perfect but it does work. You'll need to Format Data and flash the H910_20g_Oreo_full_rooted.zip + the Newest - H910_mk2000 kernel from recovery-twrp-h910-2018-10-18.img
Your phone will be wiped and updated to Stock rooted Oreo so backup your phone first!
If you have never rooted your H910 you'll need to use the guide here first > https://forum.xda-developers.com/v20/how-to/root-h910-v10m-t3664500
Note: when you get where you would flash 10r just use my rom instead. Don't forget to flash the kernel after the rom
Note2: Flash TWRP again before you reboot (Install / Install Image / recovery-twrp-h910-2018-10-18.img to Recovery
It's also recommended to use the new TWRP for Oreo found here > https://forum.xda-developers.com/v20/development/recovery-twrp-3-2-1-0-t3720239
Note: you'll have to flash TWRP back to the phone after flashing the rom and kernel because it installs stock recovery.
If you have any problems getting DATA on any sim other than AT&T check this post to fix your APN > https://forum.xda-developers.com/showpost.php?p=79619740&postcount=244
Thanks @StrikerTheHedgefox
After your phone is setup be sure and install the Magisk apk
Hide unlocked Bootloader warning boot screen by 4shared < This removes the ugly pink and black screen on reboot. I tested it and it works great
Huge thanks go to @darkknight200 and @askermk2000 for the Idea and the kernel.

thank u. but does the fingerprint work and what are the bugs if any

Yes fingerprint scanner works
Side note you'll have to flash twrp again
Use this version > https://forum.xda-developers.com/v20/development/recovery-twrp-3-2-1-0-t3720239 and you should have no problems
aminjomaa13 said:
thank u. but does the fingerprint work and what are the bugs if any
Click to expand...
Click to collapse
Sent from my PH-1 using Tapatalk

if i have root then cant i just use flashr or another flashing app for twrp

aminjomaa13 said:
if i have root then cant i just use flashr or another flashing app for twrp
Click to expand...
Click to collapse
I installing twrp img from twrp just after flashing the ROM would do the trick.

if i dont have an at&t sim card ，will this rooted rom restrict some function such as wifispot 。。。。。。

Test flashed this on my h915 device. I have working full data and root and everything works.
Just gotta debloat it myself
running very smooth

zkm15 said:
if i dont have an at&t sim card ，will this rooted rom restrict some function such as wifispot 。。。。。。
Click to expand...
Click to collapse
Its the Stock Oreo rom dump .. only thing changed is a patched_boot.img and the Eng_aboot.img
in fact the original files are in the rom too they just don't get flashed
everything should work as expected

battery life took a hit what are the optimal CPU GPU values to optimize battery without totally crushing performance

anyone else pass both safetynet test on magisk 17.2 on h910 oreo?
It seems to be failing most of the time for me.

aminjomaa13 said:
battery life took a hit what are the optimal CPU GPU values to optimize battery without totally crushing performance
Click to expand...
Click to collapse
this question is better left in the Kernel thread > https://forum.xda-developers.com/v20/development/h918-h910-us996-ucl-mk2000-kernel-t3708330
I never mess with kernel setting aside from the Screen settings

darkknight200 said:
anyone else pass both safetynet test on magisk 17.2 on h910 oreo?
It seems to be failing most of the time for me.
Click to expand...
Click to collapse
safetynet test for non at&t sim card ？ it is a problem on android N .

Awesome! Glad this works on other devices! Good job, XDA!

NotYetADev said:
Awesome! Glad this works on other devices! Good job, XDA!
Click to expand...
Click to collapse
ya the zip method you did with modifying only 2 files in the whole firmware should work on all other dirtysanta devices.
Edit:
i re-flashed the h910 oreo and setup and debloated everything again. Now I am passing safetynet with no problems and certified device. very weird.
One thing to note, this is on the early build of Oreo TWRP that I was able to flash properly vs using nouget twrp the first 2 flashes that gave me bugs each time.

darkknight200 said:
ya the zip method you did with modifying only 2 files in the whole firmware should work on all other dirtysanta devices.
Edit:
i re-flashed the h910 oreo and setup and debloated everything again. Now I am passing safetynet with no problems and certified device. very weird.
One thing to note, this is on the early build of Oreo TWRP that I was able to flash properly vs using nouget twrp the first 2 flashes that gave me bugs each time.
Click to expand...
Click to collapse
using Oreo TWRP flash this zip will pass the saftynet test ? it is quite a problem on
android N ，it will disable the wifispot function.

OP, I love you.
If we already have the engineering aboot and TWRP flashed, can we just flash this right over (with a data/system wipe)?
I love SuperROM but I need Wi-Fi Calling to work.
EDIT: I'm an idiot, I misread your instructions. Am I correct in understanding that this is just the stock AT&T Oreo image with aboot and boot swapped out?

sheik124 said:
OP, I love you.
If we already have the engineering aboot and TWRP flashed, can we just flash this right over (with a data/system wipe)?
I love SuperROM but I need Wi-Fi Calling to work
Click to expand...
Click to collapse
yes if you are coming from rooted h910 nougat rom with twrp, you can flash this h910 oreo zip with no problem.
All the bloat from att should be there when u boot up so wifi calling should work.

sheik124 said:
OP, I love you.
If we already have the engineering aboot and TWRP flashed, can we just flash this right over (with a data/system wipe)?
I love SuperROM but I need Wi-Fi Calling to work.
EDIT: I'm an idiot, I misread your instructions. Am I correct in understanding that this is just the stock AT&T Oreo image with aboot and boot swapped out?
Click to expand...
Click to collapse
darkknight200 said:
yes if you are coming from rooted h910 nougat rom with twrp, you can flash this h910 oreo zip with no problem.
All the bloat from att should be there when u boot up so wifi calling should work.
Click to expand...
Click to collapse
Yes just 2 files changed flash right over Nougat > I recommend you use this version of TWRP > https://s3.amazonaws.com/phoenix591/us996/recovery-twrp-us996-2018-09-23.img
it's tested by @darkknight200

clsA said:
Yes just 2 files changed flash right over Nougat > I recommend you use this version of TWRP > https://s3.amazonaws.com/phoenix591/us996/recovery-twrp-us996-2018-09-23.img
it's tested by @darkknight200
Click to expand...
Click to collapse
Awesome, downloading it now. Can you confirm a cpl things?
mk2000 kernel means that we can continue using exFAT on micro SD.
Right now I have unencrypted internal and external storage, this keeps it all the same.
Updates baseband/modem to the radio that came out with Oreo.
Will post results once I'm all set back up. I was literally about to selectively flash back to stock v10v, keep TWRP and root, let it download the OTA, and then try to get updated. This is easier.

sheik124 said:
Awesome, downloading it now. Can you confirm a cpl things?
mk2000 kernel means that we can continue using exFAT on micro SD.
Right now I have unencrypted internal and external storage, this keeps it all the same.
Updates baseband/modem to the radio that came out with Oreo.
Will post results once I'm all set back up. I was literally about to selectively flash back to stock v10v, keep TWRP and root, let it download the OTA, and then try to get updated. This is easier.
Click to expand...
Click to collapse
Yes mk2k Oreo still let's u use exfat.
The zip will update all partition besides the 2 described above. So you will be on Oreo baseband modem.