Few days ago I was looking for a I9505 based Rom for T-Mobile M919. Found this thread by @muniz_ri
Today I was looking for the same for the I337M & Found that M919 kernals are compatible with I337.
So I tested the M919 guide by @muniz_ri on I337M & It wokred
I tried the I9505 leak based ROM. I9505 Back Edition Official ROM will also works.
Install TWRP & follow this guide
muniz_ri said:
Here is a copy of my pre-rooted backup of the firmware. Thanks to @ausdim for his twz kernel required to fix wifi on the T-Mobile M919 (already built into the backup).
Instructions:
1. Extract the I9505XXUHOB7_Stock_Rooted_Backup folder from the .rar and place that folder into your TWRP backups folder, i.e: ext-sdcard/TWRP/BACKUPS/xxxxxx (The name of your backups folder may vary. If a backups folder does not already exist you must first create a backup using TWRP's "Backup" function before proceeding).
2. From TWRP recovery perform an "Advanced Wipe" and wipe Dalvik, System, Data, and Cache.
3. From the Main Menu press "Restore" and restore the I9505XXUHOB7_Stock_Rooted_Backup .
4. Reboot. Done!
Tip: For blazing fast speed disable animations from Developer Options.
Click to expand...
Click to collapse
Note : Mobile data wasn't stable for me. Most of the time It showed EDGE. Network Mode selection won't work properly. Couldn't select WCDMA Only. I goes back to Auto mode.
Credit - @munzi_ri
BarakOsama said:
Few days ago I was looking for a I9505 based Rom for T-Mobile M919. Found this thread by muniz_ri
Today I was looking for the same for the I337M & Found that M919 kernals are compatible with I337.
So I tested the M919 guide by muniz_ri on I337M & It wokred
I tried the I9505 leak based ROM. I9505 Back Edition Official ROM will also works.
Click to expand...
Click to collapse
Nevermind, it has the kernel in the backup. Will this work with Safestrap?
EDIT: It does not. Boot crashes into stock recovery
Apoplectic1 said:
Nevermind, it has the kernel in the backup. Will this work with Safestrap?
EDIT: It does not. Boot crashes into stock recovery
Click to expand...
Click to collapse
I not familiar with Safestrap..
BarakOsama said:
I not familiar with Safestrap..
Click to expand...
Click to collapse
It's basically a modified TWRP recovery for those of us with NB1 and newer modems, as the OTA to that one effectively locked the bootloader, and no one has managed to crack it since then. It uses an exploit to allow for the flashing of ROMs but does not touch the kernel or boot image.
If the kernel for this ROM is available to ODIN, it may work.
I guess this is the kernel.
http://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/tw-lollipop-kernel-v1-t3024631
Apoplectic1 said:
It's basically a modified TWRP recovery for those of us with NB1 and newer modems, as the OTA to that one effectively locked the bootloader, and no one has managed to crack it since then. It uses an exploit to allow for the flashing of ROMs but does not touch the kernel or boot image.
If the kernel for this ROM is available to ODIN, it may work.
Click to expand...
Click to collapse
BarakOsama said:
I guess this is the kernel.
http://forum.xda-developers.com/galaxy-s4/i9505-orig-develop/tw-lollipop-kernel-v1-t3024631
Click to expand...
Click to collapse
Unfortunately we cannot flash it unless we are still on old modems. Safestrap will not touch the kernel, and TWRP will not work on our phones due to the bootloader being locked. In order to change the kernel, we have to use ODIN, which uses a different file type (tar.md5).
Apoplectic1 said:
Unfortunately we cannot flash it unless we are still on old modems. Safestrap will not touch the kernel, and TWRP will not work on our phones due to the bootloader being locked. In order to change the kernel, we have to use ODIN, which uses a different file type (tar.md5).
Click to expand...
Click to collapse
Wait then, I'll dump the boot.img & build a tar
BarakOsama said:
Wait then, I'll dump the boot.img & build a tar
Click to expand...
Click to collapse
Sweet! You'll have at least one guiana pig phone once you do
Here is the odin flashable kernel
http://www.mediafire.com/download/g2gerx73htahz64/ausdim-kernel-v2.tar.zip
BarakOsama said:
Here is the odin flashable kernel
http://www.mediafire.com/download/g2gerx73htahz64/ausdim-kernel-v2.tar.zip
Click to expand...
Click to collapse
Fingers crossed...
---------- Post added at 04:01 PM ---------- Previous post was at 03:52 PM ----------
BarakOsama said:
Here is the odin flashable kernel
http://www.mediafire.com/download/g2gerx73htahz64/ausdim-kernel-v2.tar.zip
Click to expand...
Click to collapse
No go.
Apoplectic1 said:
Fingers crossed...
---------- Post added at 04:01 PM ---------- Previous post was at 03:52 PM ----------
No go.
Click to expand...
Click to collapse
BarakOsama said:
Click to expand...
Click to collapse
It says Authorization fail, I'm guessing the tar file did not have the proper binary to pass the bootloader, since it's locked.
Thanks for trying man.
Apoplectic1 said:
It says Authorization fail, I'm guessing the tar file did not have the proper binary to pass the bootloader, since it's locked.
Thanks for trying man.
Click to expand...
Click to collapse
M919 was on 4.4.4. But I337M was on 4.3 bootloader I think.
So that's might be the reason I got succeed
BarakOsama said:
M919 was on 4.4.4. But I337M was on 4.3 bootloader I think.
So that's might be the reason I got succeed
Click to expand...
Click to collapse
for us with locked bootloaders im on the s4 active at&t the odin file must have Samsung signature and at&t if I remember right
This won't work on AT&T I337, only the I337M which is unlocked. Android 5.0 is not compatible with any of the kernels we can flash, and kernels packaged into tars only flash if you can sign the package, and the kernel also needs to be signed for the bootloader to accept it. No Safestrap users can use this. Anyone with a normal custom recovery can.
Ah! This is great, I've been waiting to confirmation that this works with the i337M. I wasn't willing to test this myself. Which ROM was most stable between the two? Have you noticed any issues other than mobile data? Which ROM suffered from mobile data issues?
Also, were these ROMs official releases? Or just leaks?
Thanks op. I tried this on my canadian i337m and it worked..now i have lollipop..just few isuues....my LTE doesnt work at all..i still get mobile network..but only 4g...other thing...my sd card gets unmounted by itself randomly... upgraded yesterday night..so still keeping an eye for other issues.. thanks
studystand said:
Ah! This is great, I've been waiting to confirmation that this works with the i337M. I wasn't willing to test this myself. Which ROM was most stable between the two? Have you noticed any issues other than mobile data? Which ROM suffered from mobile data issues?
Also, were these ROMs official releases? Or just leaks?
Click to expand...
Click to collapse
i just tried the Black Edition Rom on my i337m Using Odin and it was not good. Not sure why...
Neikosr0x said:
i just tried the Black Edition Rom on my i337m Using Odin and it was not good. Not sure why...
Click to expand...
Click to collapse
ya I get the same message when i try to flash using odin. the method in op worked for me...but i still cant flash the new rom thru odin....
OP...how can i flash the new rom for i9505 (not black or leaked) using your method....??
sunnyzip said:
ya I get the same message when i try to flash using odin. the method in op worked for me...but i still cant flash the new rom thru odin....
OP...how can i flash the new rom for i9505 (not black or leaked) using your method....??
Click to expand...
Click to collapse
i managed to flash the TW 5.0.1 using Odin but, my wifi doesn't work anymore...
Related
Hello, i ported 4.4 OTA to all variants and now i'm going to post here the link and some things.
First of all, there is a little bug when enter to Settings/Security, but i'm going to fix it now, this is for impatients.
Features: All 4.4.2 OTA ported.
Fully RADIO support(No modem blobs changes)
Direct from Motorola OTA.
Download link: http://d-h.st/aHg
Installation:
FLASH CWM
WIPE DATA/FACTORY RESET
FLASH ROM
FLASH SU(Can be downloaded from koush website)
WIPE DALVIK.
ENJOY!
THANKS: Antiquezip for his OTA package
I'll add screenshots and more things to the post later, but now, enjoy all KK features!
So seeing as those of us who installed the original OTA can't flash a custom recovery, would we be able to downgrade back to 4.3 then flash CWM and then flash this zip? Will this also work with the US GSM AWS version is basically what I'm asking? I know you were working on getting this to the Global GSM version.
@josalaito you should credit antiquezip.
jmoore4294 said:
So seeing as those of us who installed the original OTA can't flash a custom recovery, would we be able to downgrade back to 4.3 then flash CWM and then flash this zip? Will this also work with the US GSM AWS version is basically what I'm asking? I know you were working on getting this to the Global GSM version.
Click to expand...
Click to collapse
(All variants)
Click to expand...
Click to collapse
Not sure about downgrading. Mixed results have been posted.
obvious said:
Not sure about downgrading. Mixed results have been posted.
Click to expand...
Click to collapse
Well. I know it says in the title "All variants". Guess I could just flash and find out. Downgrading was no problem. I gave it a shot just to make sure and it worked without a hitch. Was then able to re-flash the original OTA no problem.
Do we really need to wipe data if we come from stock 4.3 to 4.4.2?
josalaito said:
Hello, i ported 4.4 OTA to all variants and now i'm going to post here the link and some things.
First of all, there is a little bug when enter to Settings/Security, but i'm going to fix it now, this is for impatients.
Features: All 4.4.2 OTA ported.
Fully RADIO support(No modem blobs changes)
Direct from Motorola OTA.
Download link: http://d-h.st/aHg
Installation:
FLASH CWM
WIPE DATA/FACTORY RESET
FLASH ROM
FLASH SU(Can be downloaded from koush website)
WIPE DALVIK.
ENJOY!
I'll add screenshots and more things to the post later, but now, enjoy all KK features!
Click to expand...
Click to collapse
Thanks! Downloading now.
Brazilian Moto G Colors Edition (Dual Chip) XT1033. I'll post my feedback soon as possible.
Wi-Fi isn't working for me at the moment.
Sent a logcat already. Fingers crossed.
jmoore4294 said:
So seeing as those of us who installed the original OTA can't flash a custom recovery, would we be able to downgrade back to 4.3 then flash CWM and then flash this zip? Will this also work with the US GSM AWS version is basically what I'm asking? I know you were working on getting this to the Global GSM version.
Click to expand...
Click to collapse
jmoore..is everything wifi for you? Im trying to decide if I want to go this route or flash the original update..
plmiller0905 said:
jmoore..is everything wifi for you? Im trying to decide if I want to go this route or flash the original update..
Click to expand...
Click to collapse
Flashing it right now. In the process of setting it up.
Edit: Working good for now. Confirmed WiFi does not work. And "Settings" does FC when you attempt to enter "Security", but that was stated in the OP. Root is working. I flashed SuperSU after flashing the ROM and Xposed works perfectly. Please be aware that I am using a US GSM version. So if anyone coming here is looking for confirmation on this working for a Global GSM or other device outside of the US, I cannot confirm that.
OK, keymaster is added by motorola to firmware folder and i don't added to the rom, so this is the cause of the bugs.
josalaito said:
OK, keymaster is added by motorola to firmware folder and i don't added to the rom, so this is the cause of the bugs.
Click to expand...
Click to collapse
Just flashed rom + super su. Looking forward to keymaster zip
Here you have the workaround.
Flash without wipes, and should fix the problems.
http://d-h.st/wfS
The rom is suitable for 8gb and 16 gb both?
What about dual sim models?
josalaito said:
Here you have the workaround.
Flash without wipes, and should fix the problems.
http://d-h.st/wfS
Click to expand...
Click to collapse
So wifi is working fine??
The download is almost finishing here, but I need to unlock my bootloader.
Someone are already installed on a dual sim Moto G? I'm curious if both SIMs works or not.
If logcat doesn't lie, yes.
josalaito said:
Here you have the workaround.
Flash without wipes, and should fix the problems.
http://d-h.st/wfS
Click to expand...
Click to collapse
Settings still FC's and WiFi still doesn't work after flashing that zip.
josalaito said:
Here you have the workaround.
Flash without wipes, and should fix the problems.
http://d-h.st/wfS
Click to expand...
Click to collapse
Good timing Sideloaded and rebooting
jmoore4294 said:
Settings still FC's and WiFi still doesn't work after flashing that zip.
Click to expand...
Click to collapse
Mmm, please can you go with your file manager to firmware/image and see if you have a keymaster.XXX files?
So i just got this phone. I was told it was rooted and running alliance rom but its not they took it back to stock i guess. I am wanting to put alliance rom on it. It is on 4.3 and its nc1. It has safestrap on it because super user is on it and when i go into the safestrap app and go to recovery it takes me to the safestrap recovery. I tried to install twrp and it said root was required so i check root with root checker and it says its not rooted. My goal is to have it rooted running alliance rom (or if y'all have any suggestions on roms lol feel free to suggest) and being running smooth. any information would be helpful. thanks! :good:
pitbullmommy45245 said:
So i just got this phone. I was told it was rooted and running alliance rom but its not they took it back to stock i guess. I am wanting to put alliance rom on it. It is on 4.3 and its nc1. It has safestrap on it because super user is on it and when i go into the safestrap app and go to recovery it takes me to the safestrap recovery. I tried to install twrp and it said root was required so i check root with root checker and it says its not rooted. My goal is to have it rooted running alliance rom (or if y'all have any suggestions on roms lol feel free to suggest) and being running smooth. any information would be helpful. thanks! :good:
Click to expand...
Click to collapse
use safestrap to install alliance, Now that you are on 4.3 you can not use the normal version of twrp. You can install over the stock rom I wouldn't recommend it but I understand why people do.
ThePagel said:
use safestrap to install alliance, Now that you are on 4.3 you can not use the normal version of twrp. You can install over the stock rom I wouldn't recommend it but I understand why people do.
Click to expand...
Click to collapse
so i just install alliance like normal and then flash like normal? what about the modem that it says to flash do i flash that as well?
pitbullmommy45245 said:
so i just install alliance like normal and then flash like normal? what about the modem that it says to flash do i flash that as well?
Click to expand...
Click to collapse
I think its just the modules you need to flash (fixes wifi for locked phones). The modem flash is for people on a unlocked bootloader. If you have connectivity problems try to flash the modem file because alliance is based on ml1 and nobody is sure if the modem is different in the new update.
ThePagel said:
I think its just the modules you need to flash (fixes wifi for locked phones). The modem flash is for people on a unlocked bootloader. If you have connectivity problems try to flash the modem file because alliance is based on ml1 and nobody is sure if the modem is different in the new update.
Click to expand...
Click to collapse
i don't want to brick my phone though lol. i don't have data on my phone and i'm using it on tmobile. i just am worried about talk/text and wifi.
pitbullmommy45245 said:
i don't want to brick my phone though lol. i don't have data on my phone and i'm using it on tmobile. i just am worried about talk/text and wifi.
Click to expand...
Click to collapse
As long as you don't try to downgrade past 4.3 or try to unlock your bootloader your pretty safe. Any brick you encounter can easily be fixed by a ml1 or nc1 odin flash. If the modem doesn't work with alliance you wont brick by flashing the ml1 modem. seriously stay away from pre 4.3 odin files, bootloader unlock, and custom recovery's that are not safestrap its a headache to unbrick. Also be aware that you can only flash touch wiz 4.3 roms (no aosp).
ThePagel said:
As long as you don't try to downgrade past 4.3 or try to unlock your bootloader your pretty safe. Any brick you encounter can easily be fixed by a ml1 or nc1 odin flash. If the modem doesn't work with alliance you wont brick by flashing the ml1 modem. seriously stay away from pre 4.3 odin files, bootloader unlock, and custom recovery's that are not safestrap its a headache to unbrick. Also be aware that you can only flash touch wiz 4.3 roms (no aosp).
Click to expand...
Click to collapse
so i thought i had root and i just went into safestrap and it says i don't have root.
pitbullmommy45245 said:
so i thought i had root and i just went into safestrap and it says i don't have root.
Click to expand...
Click to collapse
Well that answers a question I had does safestrap work on nc1. Flash ml1 in odin and root with saferoot then install safestrap. You should be good to go after that.
ThePagel said:
Well that answers a question I had does safestrap work on nc1. Flash ml1 in odin and root with saferoot then install safestrap. You should be good to go after that.
Click to expand...
Click to collapse
i thought that it was dangerous to flash in odin.
pitbullmommy45245 said:
i thought that it was dangerous to flash in odin.
Click to expand...
Click to collapse
if you stay on 4.3 and do not unplug mid flash its safe enough. I have never had a problem other than the time I tried to odin to 4.1.2 after I took the 4.3 update.
---------- Post added at 12:24 AM ---------- Previous post was at 12:23 AM ----------
Just because your new to the s3 I will help you out
Odin________ If you need help follow the odin guid here
ML1
Saferoot yes its in the s4 forum but it works perfect on the s3
Safestrap read the op from top to bottom
---------- Post added at 12:31 AM ---------- Previous post was at 12:24 AM ----------
oh and when you odin to ml1 your internal data will be formatted so make sure you backup anything you want saved.
ThePagel said:
if you stay on 4.3 and do not unplug mid flash its safe enough. I have never had a problem other than the time I tried to odin to 4.1.2 after I took the 4.3 update.
---------- Post added at 12:24 AM ---------- Previous post was at 12:23 AM ----------
Just because your new to the s3 I will help you out
Odin________ If you need help follow the odin guid here
ML1
Saferoot yes its in the s4 forum but it works perfect on the s3
Safestrap read the op from top to bottom
---------- Post added at 12:31 AM ---------- Previous post was at 12:24 AM ----------
oh and when you odin to ml1 your internal data will be formatted so make sure you backup anything you want saved.
Click to expand...
Click to collapse
well thanks for the links lol. i downloaded all those files. now can you give me a step by step on how to do it or direct me to the thread that shows me how please!
pitbullmommy45245 said:
well thanks for the links lol. i downloaded all those files. now can you give me a step by step on how to do it or direct me to the thread that shows me how please!
Click to expand...
Click to collapse
It's from another site, but here is a great visual guide for using ODIN:
http://forums.androidcentral.com/dr...odin-package-last-resort-fix.html#post1007773
landshark68 said:
It's from another site, but here is a great visual guide for using ODIN:
http://forums.androidcentral.com/dr...odin-package-last-resort-fix.html#post1007773
Click to expand...
Click to collapse
when i try to use odin it says no binary! and then it stops.
pitbullmommy45245 said:
when i try to use odin it says no binary! and then it stops.
Click to expand...
Click to collapse
You extracted the ml1 tar from the 7zip compressed file right?
ThePagel said:
You extracted the ml1 tar from the 7zip compressed file right?
Click to expand...
Click to collapse
yes i did.
This is a Flashable Stock Root Version Of the newest KitKat 4.4.2 G900VVRU1ANE9
Requirements: Custom Recovery For Odex/Deodex
Disclaimer: This was build from the official stock tar not from a phone with update.zip and pulled partitions.. so all permissions/symlinks etc will be perfect aka no bugs
Odex Features:
Rooted
BusyBox
Zipaligned
Init.d support
Knox-Free
Removed Tether Provisioning checks
Removed SeLinux Updater
Removed Verizon OTA updater
Removed 200mb Worth of How-To Videos.. (Seriously Verizon?!?!?)
Read/Write to external storage
Working Art
Working Private Mode
DeOdex Features:
same as Odex
Deodexed
Non-Working Private Mode
Fix's:
Fixed Superuser Binary Updating
Fixed white text on light gray background
Rom Zips:
Odex Rom Download: http://www.androidfilehost.com/?fid=23610159112652239
Odex md5: bcac38bbee5a98ee1667f5e32f730319
DeOdex Rom Download: http://www.androidfilehost.com/?fid=23610159112652292
De-Odex md5: bff5b4283f2aaf2b351541f23d27f9ba
Disclaimer: DO NOT FLASH FIRMWARE/FULL TAR ON DEV EDITIONS
Thanks to:
HashCode - For Safestrap
GeoHot - TowelRoot
ChainFire - for superSU
JustArchi/Dsixda - for thier Kitchens Used For Various Tasks
Retail Instructions
Coming From Rooted/Safestrapped NCG/NE9
Step- 1 - Make sure you are on any rooted rom running safestrap
Step- 2 - Boot into Safestrap Select Stock Slot
Step- 3 - Wipe Data Factory Reset The Stock Slot
Step- 4 - Flash NE9 odex/deodex rom to the stock slot
Step- 5 - Reboot into Download mode From Safestrap
Step- 6 - Flash NE9 Firmware/Bootloader Package Here
Step- 7 - You will Boot into a Stock Odex/Deodex NE9
Coming From Stock NE9 OTA
Step- 1 - Flash NCG Kernel
Step- 2 - Root Device with TowelRoot Here
Step- 3 - Install Busybox from play store and install busybox itself
Step- 3 - flash NE9 Kernel or NE9 Firmware Package
Step- 3 - Install Hashcodes Latest Safestrap
Step- 4 - Boot into Safestrap Select Stock Slot
Step- 5 - Wipe Data Factory Reset The Stock Slot
Step- 6 - Flash NE9 deodex rom to the stock slot
Step- 9 - You will Boot into a Stock Odex/Deodex rom
Developer Edition Instructions
Step- 1 - Flash Rom
Step- 2 - Flash NE9 Modem
Step- 3 - Do NOT FLASH VERIZON FIRMWARE PACKAGE!!!!!!!!!!
Video Tutorials/Instructions
Thanks beans
Thank you for your time and for putting these together.
Sent from my SM-G900V using Tapatalk
Beans you always make my life easier haha thanks man!
But seriously, though... you wasted no time getting official FW bases out.
you welcome guys
MrHyde03 said:
Beans you always make my life easier haha thanks man!
But seriously, though... you wasted no time getting official FW bases out.
Click to expand...
Click to collapse
anytime bud , ya i have been looking at kies since i got home from vacation at least twice a day. and last night it was finally updated with the new tar. so i did my magic lol
So a person flashes the ne9 rom.
Why is the other step 6 firmware/bootloader package necessary?
Is it not possible for an all in one rom flash?
Love your work just interested in learning as I flash heh
---------- Post added at 09:29 PM ---------- Previous post was at 09:28 PM ----------
Like say I flashed the rom & skipped step 6 would it fail to boot? Bootloop?
---------- Post added at 09:30 PM ---------- Previous post was at 09:29 PM ----------
BeansTown106 said:
ya i have been looking at kies
Click to expand...
Click to collapse
Second person I've seen say "kies" wtf is Kies?
What's the difference between this and jasmine ROM1.0 if any?
BeansTown106 said:
you welcome guys
anytime bud , ya i have been looking at kies since i got home from vacation at least twice a day. and last night it was finally updated with the new tar. so i did my magic lol
Click to expand...
Click to collapse
I just reached my 'thanks' limit.. so I'm gonna tell you thanks instead of pressing the dagum button. :highfive:
jaladhjin said:
So a person flashes the ne9 rom.
Why is the other step 6 firmware/bootloader package necessary?
Is it not possible for an all in one rom flash?
Love your work just interested in learning as I flash heh
Like say I flashed the rom & skipped step 6 would it fail to boot? Bootloop?
Click to expand...
Click to collapse
Firmware package is necessary to have the lastest kernel, trust zone, etc...
No. Since our bootloaders are locked, an all in one rom flash would brick you. That, and safestrap (as far as I know) does not flash any other partitions other than system and data. Also, flashing those via ODIN is MUCH safer. I've not heard of anyone bricking from flashing a corrupted image via ODIN since ODIN verifies the MD5.
jaladhjin said:
Second person I've seen say "kies" wtf is Kies?
Click to expand...
Click to collapse
http://www.samsung.com/in/support/usefulsoftware/KIES/JSP
Samsung's somewhat failed attempt at "iTunes". Also used to download official firmware.
MrHyde03 said:
I just reached my 'thanks' limit.. so I'm gonna tell you thanks instead of pressing the dagum button. :highfive:
Firmware package is necessary to have the lastest kernel, trust zone, etc...
No. Since our bootloaders are locked, an all in one rom flash would brick you. That, and safestrap (as far as I know) does not flash any other partitions other than system and data. Also, flashing those via ODIN is MUCH safer. I've not heard of anyone bricking from flashing a corrupted image via ODIN since ODIN verifies the MD5.
http://www.samsung.com/in/support/usefulsoftware/KIES/JSP
Samsung's somewhat failed attempt at "iTunes". Also used to download official firmware.
Click to expand...
Click to collapse
thanks
and ya everything you said is perfect about firmware. so im skipping replying to the others lol
mdonnelly1127 said:
What's the difference between this and jasmine ROM1.0 if any?
Click to expand...
Click to collapse
jasmine was built from pulled aka dd'd partitions from an updated phone this was built from the factory images straight from samsung untouched. only difference other than what is listed in op is possibly better symlinks etc. as i read mr. hyde was having a problem with reboot command because of symlinks
So... I should flash this over jasmine? O mean whatever you think beans I always appreciate everything you do and go with what you say buddy. Now if I flash this since I have jasmine already on NE9 I can just flash this in SS without any complications or do I have to flash kernels and firmwares again?
mdonnelly1127 said:
So... I should flash this over jasmine? O mean whatever you think beans I always appreciate everything you do and go with what you say buddy. Now if I flash this since I have jasmine already on NE9 I can just flash this in SS without any complications or do I have to flash kernels and firmwares again?
Click to expand...
Click to collapse
I would say not to dirty flash this since this is an official base compared to jasmine's pulled base.
Once you've flashed NE9 firmware, you never need to flash it again... unless you downgrade to NCG. But yeah once you're on NE9, you're good. :good:
THANKS BEANS! i was gettin fcs usin jasmine base.. im givin this a go tom
Sent from my SM-G900V using XDA Free mobile app
Hey,
My download of the Deodex NE9 ROM zip keeps stopping at around ~640mb.. I've tried 3 times already! Do you think it's an issue with AFH or is any one else having issues getting the ROM to fully download?
elliwigy said:
Hey,
My download of the Deodex NE9 ROM zip keeps stopping at around ~640mb.. I've tried 3 times already! Do you think it's an issue with AFH or is any one else having issues getting the ROM to fully download?
Click to expand...
Click to collapse
I think so, I was having problems uploading to AFH yesterday.
How do we flash the ODIN firmware? What option do we check? IS it the bootloader section in ODIN?
elliwigy said:
Hey,
My download of the Deodex NE9 ROM zip keeps stopping at around ~640mb.. I've tried 3 times already! Do you think it's an issue with AFH or is any one else having issues getting the ROM to fully download?
Click to expand...
Click to collapse
is it working now? i had an email from afh admin saying he fixed issues with downloads earlier
artjrv said:
How do we flash the ODIN firmware? What option do we check? IS it the bootloader section in ODIN?
Click to expand...
Click to collapse
just download ne9 firmware only package in my ocllection thread and flash in ap section of odin
I dirty flashed odex over stock and works like butter. I'm on dev so I updates radio.
The easiest method to obtain root unlocks or update or downgrade unlocked bootloaders can be found below they were updated December of 2021
EMMC 15 Unlocking Bootloader
2022_VZW_EMMC_15_ AIO_Tool To Unlock_Bootloader+Install_TWRP And MM_QL1_Rooted_Rom Works On Any Version Bootloaders_MM_LL_KK-Reactivation Lock Remover
This Process Will Root Phone Unlock Your VZW EMMC 15 Chipset Bootloader Install TWRP Recobery And Imstall Latest QL1 Stock Rom . Downloads S5_Root_Tools_2023.7z EMMC_15_Rom.zip -- Stock QL1 6.0 Directions For Unlocking Stock Phone I would...
forum.xda-developers.com
EMMC 15 Updating Unlocked Bootloaders Or Downgrading
2022_VZW_EMMC_15_Chipset For Unlocked Dev BL To Downgrade To LL_KK Or Upgrade To MM_And Keep Unlock Bootloader
This Process Will Update Or Downgrade Your VZW EMMC Chipset DEV Aboot Bootloader Unlocked S5 To Marshmallow 6.0 Lollipop 5.0 Or Kitkat 4.2 or 4.4 Root And Unlock Instructions Can Be Found Here EMMC 15 Rooting And Bootloader Unlocking EMMC 11...
forum.xda-developers.com
For Rooting EMMC 11 Phones
2021_VZW_Locked_Bootloader_EMMC_11_Rooted/NonRooted_Roms_With_Safestrap_MM_LL_KK
This Process Will Install On The EMMC_11 Locked Bootloader Verizon S5 Marshmallow QL1 Stock Rom NonRooted With Safestrap. Lollipop PB1 Stock Rom Rooted With Safestrap. KK Rom Rooted With Safestrap What This Does This gives you the ability to...
forum.xda-developers.com
Quote:
"1. Flash Rooting_Tools_For_S5_Lollipop.zip"
Okay, beg pardon for being dense, but what do you mean, 'flash'? How? Should I fire up Odin on the computer? Is it an Android Debugging Bridge method of running a script? Do I need to use Odin anyway, to flash that older kernel first? Perhaps just use my S5 to download and install the zip? Am I making it too hard? I know I must be.
I like to follow instructions, and the 1st one has me scratching my head.
Thanks.
fukenbiker said:
Quote:
"1. Flash Rooting_Tools_For_S5_Lollipop.zip"
Okay, beg pardon for being dense, but what do you mean, 'flash'? How? Should I fire up Odin on the computer? Is it an Android Debugging Bridge method of running a script? Do I need to use Odin anyway, to flash that older kernel first? Perhaps just use my S5 to download and install the zip? Am I making it too hard? I know I must be.
I like to follow instructions, and the 1st one has me scratching my head.
Thanks.
Click to expand...
Click to collapse
Are you rooted on a lollipop rom
Yes. OptimalROM 5.0 by BigBot96. It's working great.
I am a flash junkie from way back, and I thought I was 'done', what with this complex locked bootloader safestrap business. Is this light at the end of the tunnel really is a train? I'm a wreck for flashing different flavors. The Odin back and forth on kernels has soured my interest in the whole flashing thing.
I'm interested. This sounds like a good workaround.
fukenbiker said:
Yes. OptimalROM 5.0 by BigBot96. It's working great.
I am a flash junkie from way back, and I thought I was 'done', what with this complex locked bootloader safestrap business. Is this light at the end of the tunnel really is a train? I'm a wreck for flashing different flavors. The Odin back and forth on kernels has soured my interest in the whole flashing thing.
I'm interested. This sounds like a good workaround.
Click to expand...
Click to collapse
Just flash the zip with flashfire or safestrap it will install everything you need including flashable kernels and firmwares then follow the direction in the second part in the OP
I'm on boc4 rooted but can't get to safe strap at all. Even though it states it's installed.. Do you know something I missed here? I thought anything lollipop is locked down to where you can't get to safestrap...
thewebsiteisdown said:
I'm on boc4 rooted but can't get to safe strap at all. Even though it states it's installed.. Do you know something I missed here? I thought anything lollipop is locked down to where you can't get to safestrap...
Click to expand...
Click to collapse
Are you flashing the ni2 kernel to get to safestrap?
Sent from my SM-G900V using Tapatalk
@jrkruse I been using this app to boot into SS can I still use this to flash your rom or do I have to install your Lollipop SS? Thanks
Sent from my SM-G900V using XDA Free mobile app
Ok I do still have to install the older kernel. I gotcha thank you sir.
I see a version 2 for flashing root tools. Any major difference?
713brianp27 said:
I see a version 2 for flashing root tools. Any major difference?
Click to expand...
Click to collapse
Verision 2 is a fix for those people that flashed the rooting tools on kitkat rom and screwed up safestrap. But as it turned out flashing the original didnt mess anything up so I felt no need to post it.
killa408shark said:
@jrkruse I been using this app to boot into SS can I still use this to flash your rom or do I have to install your Lollipop SS? Thanks
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
Your good using that but when you flash my rom it will already have a modified version of that in the safestrap for lolilpop app so no need to install it twice
jrkruse said:
Verision 2 is a fix for those people that flashed the rooting tools on kitkat rom and screwed up safestrap. But as it turned out flashing the original didnt mess anything up so I felt no need to post it.
Click to expand...
Click to collapse
Gotcha. I just assumed it was an updated version and flashed it. (S5 was on BOC4) and seemingly worked fine. Looked @ both zips, nothing jumped out at me as different. Except md5. Lol
Thank you for responding. You have to be a busy man, and super talented to do all you do with the locked BL. Amazing. Half the ROMs I see have your name. I'd love to see what you could do w/o restrictions.
Sent from my Nexus 6 using Tapatalk
713brianp27 said:
Gotcha. I just assumed it was an updated version and flashed it. (S5 was on BOC4) and seemingly worked fine. Looked @ both zips, nothing jumped out at me as different. Except md5. Lol
Thank you for responding. You have to be a busy man, and super talented to do all you do with the locked BL. Amazing. Half the ROMs I see have your name. I'd love to see what you could do w/o restrictions.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
It will work fine on lollipop rom Basically the only difference is the V2 doesnt put the apks in there own folders inside of system/priv-app folder. On kitkat the apk were not in seperate folders and would not read the apps if they were in their own seperate folders. I then figured if you were on kitkat you already would have safestrap installed to be able to flash a zip. So basically I decided to leave the zip as is so the safestrap zip if flashed on kitkat rom would leave the apk's in their own folder causing the system not to read them therefore causing your original safestrap apk to not be overwritten. Basically what im saying is I wasted my time making V2 but if you flashed it you are perfectly fine!
jrkruse said:
It will work fine on lollipop rom Basically the only difference is the V2 doesnt put the apks in there own folders inside of system/priv-app folder. On kitkat the apk were not in seperate folders and would not read the apps if they were in their own seperate folders. I then figured if you were on kitkat you already would have safestrap installed to be able to flash a zip. So basically I decided to leave the zip as is so the safestrap zip if flashed on kitkat rom would leave the apk's in their own folder causing the system not to read them therefore causing your original safestrap apk to not be overwritten. Basically what im saying is I wasted my time making V2 but if you flashed it you are perfectly fine!
Click to expand...
Click to collapse
OK thanks for your time , @jrkruse if you ever make a Moar for Shamu let me know!
Sent from my Nexus 6 using Tapatalk
@jrkruse I am running MOAR ver 6.62 and everytime I try to flash this in SS it keeps saying failed. I checked the md5 and they match. I did install the NI2 Flasher .apk and it works flawlessly. Could the NI2 Flasher .apk be the reason why it fails when I tried to flash this?
Thank you in advance.
EDIT:
Well I finally got it to flash.
Now my question is, when I am done flashing stuff in SS, do I still have to flash OA8 flashable kernel before I reboot out of SS? I know it says that all this stuff is built in, but I just wanted to be sure. Thanks.
? If I have helped you please hit the thanks ?
Sir is anyone working on a new root for OE1?? It seems that it was forced onto my S5 vzw and now I can't root or downgrade. Thank you.
Sent from my SM-G900V using XDA Free mobile app
stajam said:
@jrkruse I am running MOAR ver 6.62 and everytime I try to flash this in SS it keeps saying failed. I checked the md5 and they match. I did install the NI2 Flasher .apk and it works flawlessly. Could the NI2 Flasher .apk be the reason why it fails when I tried to flash this?
Thank you in advance.
EDIT:
Well I finally got it to flash.
Now my question is, when I am done flashing stuff in SS, do I still have to flash OA8 flashable kernel before I reboot out of SS? I know it says that all this stuff is built in, but I just wanted to be sure. Thanks.
? If I have helped you please hit the thanks ?
Click to expand...
Click to collapse
You have to flash the kernel for the ROM you are on (oa8,oc4 or oe1)
Sent from my SM-G900V using Tapatalk
jrv331 said:
You have to flash the kernel for the ROM you are on (oa8,oc4 or oe1)
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Okay, that's what I figured. Thanks!
? If I have helped you please hit the thanks ?
gerland said:
Sir is anyone working on a new root for OE1?? It seems that it was forced onto my S5 vzw and now I can't root or downgrade. Thank you.
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
What he said! ^^^
According to the Verizon Galaxy S5 Update Page:
Android® security patches and bug fixes.
Resolved a ring-back tone issue on calls to non-Verizon phones.
Fixed an issue where some users reported difficulty making calls to non-Verizon customers.
Click to expand...
Click to collapse
The security patch included is (most likely) the July one, since Samsung also just released a new software update to international models which includes the July security patch and Verizon has been updating the "Galaxy S" series phones with the July update over the past few weeks.
Stock No-Wipe Firmware:
*This will remove Developer Status/Lock your Bootloader*
G900VVRU2DQF2_G900VVZW2DQF2_G900VVRU2DQF2_HOME.tar.md5.zip
Developer Bootloader Friendly/No Aboot No-Wipe Firmware:
G900VVRU2DQF2_G900VVZW2DQF2_G900VVRU2DQF2_HOME_No_Aboot.tar.md5.zip
Appreciate that, but how do you get the Odin firmware file out of curiosity?
drewcu said:
Appreciate that, but how do you get the Odin firmware file out of curiosity?
Click to expand...
Click to collapse
Updato is one way; this shows the list for the Verizon S5 with the most recent at the top; they haven't gotten the new update up yet though.
I think that another way would be for someone to dig through the update.zip file which would be on the phone of someone who got the OTA update downloaded but had not yet installed it yet.
To confirm, the only thing that's different between the dev-friendly version (when it comes out) and the stock is the missing aboot? Thanks again.
drewcu said:
To confirm, the only thing that's different between the dev-friendly version (when it comes out) and the stock is the missing aboot? Thanks again.
Click to expand...
Click to collapse
Yes and the firmware just came out today so I'm currently in the process of uploading both versions.
Dudash said:
Yes and the firmware just came out today so I'm currently in the process of uploading both versions.
Click to expand...
Click to collapse
Is this flashable with Odin only or possibly need to already be on a specific kernal? I have tried on two S5900V's through TWRP and both result in a failure message. Both are on jkruse de-bloated MM rom at the moment.
Kaliaila said:
Updato is one way; this shows the list for the Verizon S5 with the most recent at the top; they haven't gotten the new update up yet though.
I think that another way would be for someone to dig through the update.zip file which would be on the phone of someone who got the OTA update downloaded but had not yet installed it yet.
Click to expand...
Click to collapse
The link for the update zip is not working when you tap or click on it
Sent from my SM-G900V using Tapatalk
---------- Post added at 11:25 AM ---------- Previous post was at 11:16 AM ----------
No one believe update.zip files anymore ? i need one badley
Sent from my SM-G900V using Tapatalk
Kastro1784 said:
The link for the update zip is not working when you tap or click on it
Sent from my SM-G900V using Tapatalk
---------- Post added at 11:25 AM ---------- Previous post was at 11:16 AM ----------
No one believe update.zip files anymore ? i need one badley
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Odd. It works for me.
Sent from my SM-G900V using Tapatalk
Since no one wanted to chime in and help me out in my post, you need to unzip the file and load the md5 into Odin's AP slot and flash it. Then let the phone do its thing and flash the latest TWRP with odin after. Then go back into TWRP and flash supersu to gain root again. Trying to flash right within TWRP is not an option, not sure why its not explained.
So this update wont "factory reset" my device?
AWESOME1092387456 said:
So this update wont "factory reset" my device?
Click to expand...
Click to collapse
I dirty flashed two S5's last night with Odin, no factory reset and both phones kept their bootloaders un touched since unlocked. :good:
stuck on Verizon boot screen
After the update via OTA, my aunt's phone has been stuck on Verizon boot screen. Tried booting into safe mode, with same result. Any ideas on how not to lose all her data? Thanks!
This sucks I wanna download this so bad but my computer is down smdh is it possible someone can make and ota update zip file for me so can flash this through stock recovery on my phone ?
Sent from my SM-G900V using Tapatalk
I guess no one knows how to do it huh smdh
Sent from my SM-G900V using Tapatalk
Rumsfield said:
I dirty flashed two S5's last night with Odin, no factory reset and both phones kept their bootloaders un touched since unlocked. :good:
Click to expand...
Click to collapse
Did you loose root?
I dirty flashed and lost root, was unable to get it back.
Reloaded TWRP via Odin and then flashed SuperSU, nothing. Wiped and restore backup all good. ..
mastertech007 said:
Did you loose root?
I dirty flashed and lost root, was unable to get it back.
Reloaded TWRP via Odin and then flashed SuperSU, nothing. Wiped and restore backup all good. ..
Click to expand...
Click to collapse
I always flash super su and whatever else I need in recovery after I've flashed the rom so I cant give you a definitive answer. Both phones did upgrade without data loss and now advanced calling/wifi calling actually work now which is why I flashed in the first place.
Working?
Is this working? Ive tried everything and i have the Toshiba chip. Emmc 11. It soft bricks if i try to downgraded to stock builds.
JasonD1180 said:
Is this working? Ive tried everything and i have the Toshiba chip. Emmc 11. It soft bricks if i try to downgraded to stock builds.
Click to expand...
Click to collapse
The new file seemed to unlock boot loader. Couldnt get odin to flash twrp......
JasonD1180 said:
The new file seemed to unlock boot loader. Couldnt get odin to flash twrp......
Click to expand...
Click to collapse
If you flash the dev boot loader friendly version it wont screw with your bootloader whatsoever. Before you restart go back in TWRP and flash supersu to get root again. Saying it "unlocked boot loader" may cause confusion to people because it does not, you need to manually go from locked to DEV status via a few of the methods posted in here.
Rumsfield said:
If you flash the dev boot loader friendly version it wont screw with your bootloader whatsoever. Before you restart go back in TWRP and flash supersu to get root again. Saying it "unlocked boot loader" may cause confusion to people because it does not, you need to manually go from locked to DEV status via a few of the methods posted in here.
Click to expand...
Click to collapse
Ive not had twrp or root on this device but it went from saying vzw official binary to samsung original. Will i be able to root as long as twrp flashes?