Q&A for [ ROM ][ Feb 10 ] Stock Rooted XNPH05Q
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ ROM ][ Feb 10 ] Stock Rooted XNPH05Q. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
running fine, thank you for sharing! :good:
New to cyanogen, flashing etc. If i flash this rom, do i still keep all my settings/apps/data?
I have changed the dpi, do i need to revert back to stock dpi berøre updating to this ?
Hi I am a newbie and I just followed this guide http://forum.xda-developers.com/showthread.php?t=2788632 and rooted my phone. Today I check android and it says there was an incremental update, after downloading it I clicked install, the phone rebooted into TeamWin Recovery Project. First in order to install this update must I wipe my phone? I tried to install the update zip file in the /cache but it gave a failure, something to do with md5 file not found and something.
Just to thanks...
Thank you @Calkulin for your thread about the 05Q update!
(sorry to pollute here, but I can't reply into the topic...)
---------- Post added at 04:00 PM ---------- Previous post was at 03:47 PM ----------
xcoolgodx said:
Hi I am a newbie and I just followed this guide http://forum.xda-developers.com/showthread.php?t=2788632 and rooted my phone. Today I check android and it says there was an incremental update, after downloading it I clicked install, the phone rebooted into TeamWin Recovery Project. First in order to install this update must I wipe my phone? I tried to install the update zip file in the /cache but it gave a failure, something to do with md5 file not found and something.
Click to expand...
Click to collapse
Hi, just follow this topic: http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-xnph05q-t3027033/page16
---------- Post added at 04:05 PM ---------- Previous post was at 04:00 PM ----------
Exhale68 said:
New to cyanogen, flashing etc. If i flash this rom, do i still keep all my settings/apps/data?
Click to expand...
Click to collapse
Foolowing Calkulin's topic, nothing will be lost!
xcoolgodx said:
Hi I am a newbie and I just followed this guide http://forum.xda-developers.com/showthread.php?t=2788632 and rooted my phone. Today I check android and it says there was an incremental update, after downloading it I clicked install, the phone rebooted into TeamWin Recovery Project. First in order to install this update must I wipe my phone? I tried to install the update zip file in the /cache but it gave a failure, something to do with md5 file not found and something.
Click to expand...
Click to collapse
Exactly the same problem here.
néonaloj said:
Hi, just follow this topic: http://forum.xda-developers.com/oneplus-one/development/rom-stock-rooted-xnph05q-t3027033/page16
Click to expand...
Click to collapse
I read the whole thread but there's nothing I can see there to help with this problem of the OTA not installing.
Jake. said:
Exactly the same problem here.
I read the whole thread but there's nothing I can see there to help with this problem of the OTA not installing.
Click to expand...
Click to collapse
I downloaded the actual file provided by Calkulin and not the default updater.
then when you install update / boot recovery install with the zip that you downloaded yourself and it works.
@jake: But why dont you just use the Calkulin's rooted rom? It worked fine for me, putting it into TWRP, first that zip, then the "extra", then SU. Wipe cache/Dalvik.
I hope I have understand well your question, English is not my language..
Ringer volume keep lowering itself do you have this issue or not??
THANKS!
Update work well and the color is back, finally. I'm very happy about that!
THANKS!
RE Question: Can I flash these over cm12 nightly?
Q: Can i Flash this ROM over my CM12/Other Lollipop ROM?
A: Yes youi can, However....
You will need to do a full Wipe!
Also Lollipop comes with a new Radio which bricks/breaks the Proximity sensor
in Android Versions preceding 5.0 meaning....
Any Versions of android before 5.0 is not fully compatible with the radio from Android 5.0+.
Symptom of using the Android 5.0 Radio with previous Versions of Android Results in
the proximity sensor registering as being blocked.
Therefore screen off gestures (V Flashlight, O Camera, < ǁ > Playback Controls) will NOT work.
Also while in a call, your phones display will always turn off, and will not turn on until the call has ended.
Unless you program a hardware button to end the call you will not be able to end calls,
your screen will be unresponsive until the party on the other end of your call has ended the call...
Flashing a rom will NOT change the radio.
you must fastboot flash the radio intended for Android 4.4.4 for this rom.
How to flash Stock Rooted XNPH05Q for OnePlus One
Hi, I am new to the Android world and am a novice.
I am using a China OnePlus One with XNPH25R ROM flashed by the shopkeeper, rooted with TWRP recovery. I would like to know if I could flash the new ROM Rooted XNPH05Q using TWRP, and if there are any Wipes I need to do before or after. Thank you.
installing 05Q on multirom
I'm running the latest cm12 official nightly and have multirom installed on my phone. Can I flash this ROM as my secondary ROM and flash the extras zip in the secondary ROM?
bean5 said:
Hi, I am new to the Android world and am a novice.
I am using a China OnePlus One with XNPH25R ROM flashed by the shopkeeper, rooted with TWRP recovery. I would like to know if I could flash the new ROM Rooted XNPH05Q using TWRP, and if there are any Wipes I need to do before or after. Thank you.
Click to expand...
Click to collapse
Only wipe cache/Dalvik. "Install" the rooted rom by TWRP + extras. Update Super SU, wipe cache/Dalvik.
It's done, nothing will be lost and you don't have to upgrade step by step, this is a full rom.
---------- Post added at 15:32 ---------- Previous post was at 15:23 ----------
dev_rush said:
I'm running the latest cm12 official nightly and have multirom installed on my phone. Can I flash this ROM as my secondary ROM and flash the extras zip in the secondary ROM?
Click to expand...
Click to collapse
Don't think so, not the same kernel, modem etc...
Hi !
I am new to android and running OTA 05Q. i was looking for a tutorial to install this ROM on my phone without wiping all data. I looked at the original thread but couldn't find something that wouldn't involve losing my apps etc. Thanks a lot for your help !
geriri said:
Hi !
I am new to android and running OTA 05Q. i was looking for a tutorial to install this ROM on my phone without wiping all data. I looked at the original thread but couldn't find something that wouldn't involve losing my apps etc. Thanks a lot for your help !
Click to expand...
Click to collapse
You won't loose anything, nor using Calkulin's rooted rom, nor using the OTA
download
why is my virus software blocking the download?
what's different on these images?
what is the meaning of that 2nd (XNPH05Q Radio, etc) image? it would be nice if there were description on the first post about images and what they have with them.
sent from phone via chrome (so it's hard to scroll previous chatter to find which one to take.
This ROM is awesome. I''m coming from stock CM11S and CM12 nightlies but was very unsatisfied with the functionality of the phone. Random restarts, wifi not working, camera taking odd pictures. Since friday I had no issues, all working fine.
Sample pic taken with CM12 nightly stock camera app, no filters.
Related
I purchased a refurbished tf300t, flashed twrp on it, installed cm 10 then cm 11, installed multirom, installed a different blob to install the new version of multirom with twrp, tried flashing omni rom to no avail. I was not thinking correctly as I have never had problems with my previous phones that I could not fix but thus far I have been unable to find a stock rom and a way to flash it such as odin for other phones/tablets. I have downloaded stock zip files to no avail and have found nothing useful as of yet...haven't figured how to flash back to the previous version of twrp as I have been a CWM user until I received this device which supposedly had twrp which couldn't be bricked with. multirom is uninstalled now and I'm trying to figure out how to flash a stock rom and start from scratch again as I have never been an asus tab nor smartphone user previously. I also have a twrp asking for a password as well and I have read that there is a way around that but have not looked into that yet.
Any and All help is appreciated
Thank you.
xerotix said:
I purchased a refurbished tf300t, flashed twrp on it, installed cm 10 then cm 11, installed multirom, installed a different blob to install the new version of multirom with twrp, tried flashing omni rom to no avail. I was not thinking correctly as I have never had problems with my previous phones that I could not fix but thus far I have been unable to find a stock rom and a way to flash it such as odin for other phones/tablets. I have downloaded stock zip files to no avail and have found nothing useful as of yet...haven't figured how to flash back to the previous version of twrp as I have been a CWM user until I received this device which supposedly had twrp which couldn't be bricked with. multirom is uninstalled now and I'm trying to figure out how to flash a stock rom and start from scratch again as I have never been an asus tab nor smartphone user previously. I also have a twrp asking for a password as well and I have read that there is a way around that but have not looked into that yet.
Any and All help is appreciated
Thank you.
Click to expand...
Click to collapse
I made a mistake in my post, I would like this in android development for TF300T please.
xerotix said:
I purchased a refurbished tf300t, flashed twrp on it, installed cm 10 then cm 11, installed multirom, installed a different blob to install the new version of multirom with twrp, tried flashing omni rom to no avail. I was not thinking correctly as I have never had problems with my previous phones that I could not fix but thus far I have been unable to find a stock rom and a way to flash it such as odin for other phones/tablets. I have downloaded stock zip files to no avail and have found nothing useful as of yet...haven't figured how to flash back to the previous version of twrp as I have been a CWM user until I received this device which supposedly had twrp which couldn't be bricked with. multirom is uninstalled now and I'm trying to figure out how to flash a stock rom and start from scratch again as I have never been an asus tab nor smartphone user previously. I also have a twrp asking for a password as well and I have read that there is a way around that but have not looked into that yet.
Any and All help is appreciated
Thank you.
Click to expand...
Click to collapse
So you do have fastboot access ?
Thx Josh
---------- Post added at 02:21 PM ---------- Previous post was at 02:20 PM ----------
xerotix said:
I made a mistake in my post, I would like this in android development for TF300T please.
Click to expand...
Click to collapse
No this is not android dev ....
You may get them to move to the Q&A section but that would be it ...
Thx Josh
lj50036 said:
So you do have fastboot access ?
Thx Josh
---------- Post added at 02:21 PM ---------- Previous post was at 02:20 PM ----------
No this is not android dev ....
You may get them to move to the Q&A section but that would be it ...
Thx Josh
Click to expand...
Click to collapse
I can still boot into twrp with no multi rom anymore. unable to flash any working rom thus far and I have no backup to use...so nothing happens except booting into recovery.
xerotix said:
I can still boot into twrp with no multi rom anymore. unable to flash any working rom thus far and I have no backup to use...so nothing happens except booting into recovery.
Click to expand...
Click to collapse
Sounds like you need this guide of mine ...
http://forum.xda-developers.com/transformer-tf300t/help/guide-t2854495
If you need any help post on that thread....
Thx Josh
:good::good::good::good::good::good::good::good:
I'm about to give it a shot...I needed this.
Thank you
lj50036 said:
Sounds like you need this guide of mine ...
http://forum.xda-developers.com/transformer-tf300t/help/guide-t2854495
If you need any help post on that thread....
Thx Josh
Click to expand...
Click to collapse
Hello everyone.
Two hours ago I received the notification about the Android 5.0 update. I downloaded it and hit "Install". Then, "TeamWin" started, but not the update. I rebooted into System and tried to update again - but it tells me that 4.4.4 is the latest version I can get now. I'm on Build KTU84P now.
1) Do I need to remove TeamWin? If yes, with what?
2) How can I start the update again? I'm on a super slow connection and it would hurt to download the 500 MB again…
Thank you!
Fablus said:
Hello everyone.
Two hours ago I received the notification about the Android 5.0 update. I downloaded it and hit "Install". Then, "TeamWin" started, but not the update. I rebooted into System and tried to update again - but it tells me that 4.4.4 is the latest version I can get now. I'm on Build KTU84P now.
1) Do I need to remove TeamWin? If yes, with what?
2) How can I start the update again? I'm on a super slow connection and it would hurt to download the 500 MB again…
Thank you!
Click to expand...
Click to collapse
You need to remove TeamWin, and load up your stock recovery. I don't have the exact instructions for this unfortunately.
The OTA update will come back to your phone soon, usually. Did for me within the hour.
The issue I am having now, back with stock recovery, is during the install I am getting a dead Android error icon, and can't continue. Looking for any help I can, and hopefully it will help you too.
Mysticodex said:
You need to remove TeamWin, and load up your stock recovery. I don't have the exact instructions for this unfortunately.
The OTA update will come back to your phone soon, usually. Did for me within the hour.
The issue I am having now, back with stock recovery, is during the install I am getting a dead Android error icon, and can't continue. Looking for any help I can, and hopefully it will help you too.
Click to expand...
Click to collapse
Maybe we need http://forum.xda-developers.com/google-nexus-5/general/stock-checker-zip-prepare-ota-t2927865?
Gosh, this used to be so easy all the time.
if you are using twrp, why the heck are you trying to install the ota? why not download(from xda) and flash a recovery flashable stock or aosp build, and make life much easier for yourself? heck, i dirty flashed from 444 to 5.0 via an aosp flashable zip without any issues, and kept all my data.
simms22 said:
if you are using twrp, why the heck are you trying to install the ota? why not download(from xda) and flash a recovery flashable stock or aosp build, and make life much easier for yourself? heck, i dirty flashed from 444 to 5.0 via an aosp flashable zip without any issues, and kept all my data.
Click to expand...
Click to collapse
I've read http://forum.xda-developers.com/goo...-android-4-4-3-ktu84m-rooted-busybox-t2557523 and it clearly states
-Do a factory reset (maybe you can keep data coming from STOCK 4.4.4 - maybe)
Click to expand...
Click to collapse
And I didn't want to count on a maybe.
I'm using stock recovery, rooted as per normal, and a custom kernal. OTA is giving an Android dead error, with no text. Trying to figure out how to diagnose this.
Fablus said:
I've read http://forum.xda-developers.com/goo...-android-4-4-3-ktu84m-rooted-busybox-t2557523 and it clearly states
Click to expand...
Click to collapse
it clearly states what? to use recovery version 2.8+? i used an older version, twrp version 2.6.2.4. what else?
---------- Post added at 05:51 PM ---------- Previous post was at 05:48 PM ----------
Mysticodex said:
I'm using stock recovery, rooted as per normal, and a custom kernal. OTA is giving an Android dead error, with no text. Trying to figure out how to diagnose this.
Click to expand...
Click to collapse
it wont flash over a rooted rom anymore as of lollipop. you can flash the factory img via fastboot though, in your bootloader.
simms22 said:
it clearly states what? to use recovery version 2.8+? i used an older version, twrp version 2.6.2.4. what else?
---------- Post added at 05:51 PM ---------- Previous post was at 05:48 PM ----------
it wont flash over a rooted rom anymore as of lollipop. you can flash the factory img via fastboot though, in your bootloader.
Click to expand...
Click to collapse
Trying to remove the root right now via SuperSU. I am hopeful it will work better afterwards.
Edit: SuperSU unrooted it, rebooted, did OTA again, error again. Is there no way to find out what this error is?
Q&A for [ROM][5.0]+[4.4.4][Official][Nighties]VanirAOSP Lollipop Alpha 3
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0]+[4.4.4][Official][Nighties]VanirAOSP Lollipop Alpha 3. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
help
I dont have root. To take this one i have to?
Sorry, have been busy lately.
As of today, you will have two options:
You can use the version vanir_bacon_5.0.0.120214.zip that will have working root buildin but a permissive SELinux (and therefore there is some risk of something invading your system) or you can use the version vanir_bacon_5.0.0.120214.enforced.zip and install SuperSU afterwards...
I am totally stock ROM and recovery.
Can I just download Vanir Rom and Gapps to phone and then:
1: wolume+ and powerbotton
2: wipe data
3: install Vanir zip
4: install Gapps zip
Finished......
Or I am totally on the wrong way ?
Printet on OnePlus One
ZoNe_dk said:
I am totally stock ROM and recovery.
Can I just download Vanir Rom and Gapps to phone and then:
1: wolume+ and powerbotton
2: wipe data
3: install Vanir zip
4: install Gapps zip
Finished......
Or I am totally on the wrong way ?
Printet on OnePlus One
Click to expand...
Click to collapse
you need to install custom recovery first
http://forum.xda-developers.com/showthread.php?t=2788632
There is no face unlock feature in smart lock menu. Someone told me to flash a different version of gapps to fix it. Can I dirty flash a different version or should I do it after wiping data?
Thanks.
Sent from my A0001 using XDA Free mobile app
agentinani047 said:
There is no face unlock feature in smart lock menu. Someone told me to flash a different version of gapps to fix it. Can I dirty flash a different version or should I do it after wiping data?
Thanks.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
You can try without wiping data: just wipe system, dalvik and cache partitions, flash your ROM, flash gapps, reboot.
for everyone who wants to change the settings for the notification bar weather: just add a "cLock" widget and set everything up there. :good:
i'm on vanir 5.0.2 (problem with xpose mod)
I just wanted to know why xpose module is not working on this rom.
whenever i run xpose mod it says ur version of android is not suported.
wat to do??
deb1806 said:
I just wanted to know why xpose module is not working on this rom.
whenever i run xpose mod it says ur version of android is not suported.
wat to do??
Click to expand...
Click to collapse
Xposed does not work with ART. You'll have to go back to a 4.4.4 ROM, where dalvik cache is enabled.
cam30era said:
Xposed does not work with ART. You'll have to go back to a 4.4.4 ROM, where dalvik cache is enabled.
Click to expand...
Click to collapse
sorry for being a noob.. i jst forgot dat 5.o is ART .
any alternative of xpose for 5.0
deb1806 said:
sorry for being a noob.. i jst forgot dat 5.o is ART .
any alternative of xpose for 5.0
Click to expand...
Click to collapse
No need to apologize. Everyone was a noob once. I think you'll have to wait until the developer updates xposed to work with ART. I can't imagine it'll be long. If you search XDA you might even find a thread.
You can get the buildprop editor from the play store too. I use 401 dpi
so I had this rom and worked perfectly and almost without bugs (version 122914) and now in the last version the wifi is working very badly and does not connect correctly, gives authentication error. Anyone knows how to fix it? thanks in advance
joseka22 said:
so I had this rom and worked perfectly and almost without bugs (version 122914) and now in the last version the wifi is working very badly and does not connect correctly, gives authentication error. Anyone knows how to fix it? thanks in advance
Click to expand...
Click to collapse
Upon further research, it is confirmed that Vanir ROM does NOT include any modem files. Sorry for the previous misinformation.
I just flashed it and got caught in a bootloop I turned it off but it finally booted because (and I dont know the reasoning behind how it works, I just know it worked) I booted into fastboot and then reboot it that way and it works.
EDIT: It only works when you have a usb plugged and when you unplug it it reboots.
Will flashing a new kernel like AK fix this problem?
elpiggo said:
I just flashed it and got caught in a bootloop I turned it off but it finally booted because (and I dont know the reasoning behind how it works, I just know it worked) I booted into fastboot and then reboot it that way and it works.
EDIT: It only works when you have a usb plugged and when you unplug it it reboots.
Will flashing a new kernel like AK fix this problem?
Click to expand...
Click to collapse
That's an odd problem... Did you clean flash?
rudi_j7 said:
That's an odd problem... Did you clean flash?
Click to expand...
Click to collapse
Yeah I came from stock and wiped everything. The Rom would only run if usb debugging was enabled and when I tried to reboot into recovery, it wouldnt let me unless i selected recovery from the power menu, then waited until the twrp logo showed up, then unplugged it. Otherwise it would just reboot into the rom
Latest vanir has a kernel that needs latest firmware to work.
Our Exodus has a kernel that works with normal firmware so you might want to use this.
And you should maybe stay away from CM's new firmware as we got informed that at least find7 seems to hardbrick with the newest firmware and find7 is very close to bacon...
Martin_Ro said:
Latest vanir has a kernel that needs latest firmware to work.
Our Exodus has a kernel that works with normal firmware so you might want to use this.
And you should maybe stay away from CM's new firmware as we got informed that at least find7 seems to hardbrick with the newest firmware and find7 is very close to bacon...
Click to expand...
Click to collapse
I have insalled 13.01 nightly CM12 and I don't have any problems. No bootlops, no brick. Not tried today nightly yet.
Q&A for Firmware-Only_Odin_Flashable_ Images_For_4.4.. And_5.0_Roms_Updated_12_2_14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Firmware-Only_Odin_Flashable_ Images_For_4.4.. And_5.0_Roms_Updated_12_2_14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
odd
first off what is; non-hlos
(explain in post 1 for new users also please)
Ok i tried to flash NKD on Cyanogenmod 11.0 build 121214 but it refuses to go.
running the latest teamwin recovery project twrp 2.8.3.0 klte
am i missing something?
Ok so i want to odin the new lolllipop im in nk4. But if i want to go back to nk4 i flash one these in odin? Than i can flash nk4 full tar in odin?
Anyone know of a zip to get back to kit Kat firmware? I used one to get to lollipop because my computer sucks and it's way easier. Not really sure why this method isn't used more.
jtadak said:
Anyone know of a zip to get back to kit Kat firmware? I used one to get to lollipop because my computer sucks and it's way easier. Not really sure why this method isn't used more.
Click to expand...
Click to collapse
Try this post
http://forum.xda-developers.com/sprint-galaxy-s5/development/stock-rom-ni3-kitkat-rom-t2886171
CAJUNMIKE said:
Try this post
http://forum.xda-developers.com/sprint-galaxy-s5/development/stock-rom-ni3-kitkat-rom-t2886171
Click to expand...
Click to collapse
Thank you but I'm looking for a zip to get to the nk4 bootloader.
jtadak said:
Thank you but I'm looking for a zip to get to the nk4 bootloader.
Click to expand...
Click to collapse
Right within the OP of that thread is
Full bootloaders:
4.4.2 - [LINK][ROM][ODIN][TAR]SM-G900P NE5 (NE5 Modem/Kernel/ROM - Stock)
4.4.4 - G900PVPU1ANK4_G900PSPT1ANK4_SPR.zip
CAJUNMIKE said:
Right within the OP of that thread is
Full bootloaders:
4.4.2 - [LINK][ROM][ODIN][TAR]SM-G900P NE5 (NE5 Modem/Kernel/ROM - Stock)
4.4.4 - G900PVPU1ANK4_G900PSPT1ANK4_SPR.zip
Click to expand...
Click to collapse
Wow! That's what I get for reading while at work. Thanks for not blowing up. Haha
G900PVPU2BOD3 added Factory Reset Protection
Bootloaders are locked to BOD3 after upgrading, meaning all the BOA6 stock images are now unusable. I've been stuck using the MOAR rom since the update came out and can't go back to stock, along with a ton of other people. Now I guess we wait for someone to post a BOD3 stock image.
Many aplogies for my ignorance but I am running out of ideas. I wanted to try out Cyanogenmod 12.1 so I flashed philztouch recovery using ODIN and installed the latest CM 12.1 zip from official cyanogenmod download. I did take a backup prior to flashing CM however now I am unable to restore from the backup, it says it is not valid (!!!???).
Can someone please tell me how to get the my sprint GS5 back to completely stock; I don't need root anymore or custom recovery or any of that, I just want it back to how it was when I opened the box. I have all my pics/messages backed up so I am not afraid to wipe it completely. If someone can point me to a file to download and flash in ODIN or whatever needs to be done I will do it. If you need any information from my phone I will gladly provide it.
Please help, thanks!
ej72 said:
Many aplogies for my ignorance but I am running out of ideas. I wanted to try out Cyanogenmod 12.1 so I flashed philztouch recovery using ODIN and installed the latest CM 12.1 zip from official cyanogenmod download. I did take a backup prior to flashing CM however now I am unable to restore from the backup, it says it is not valid (!!!???).
Can someone please tell me how to get the my sprint GS5 back to completely stock; I don't need root anymore or custom recovery or any of that, I just want it back to how it was when I opened the box. I have all my pics/messages backed up so I am not afraid to wipe it completely. If someone can point me to a file to download and flash in ODIN or whatever needs to be done I will do it. If you need any information from my phone I will gladly provide it.
Please help, thanks!
Click to expand...
Click to collapse
You will need one of the full factory tars available from the development thread.
And I've read somewhere that you may need to wipe internal storage coming from CM so backup what you want to save.
Just a warning, if you flash anything newer than OA6, you will not be able to flash back to older firmwares.
http://forum.xda-developers.com/sprint-galaxy-s5/development
tdunham said:
You will need one of the full factory tars available from the development thread.
And I've read somewhere that you may need to wipe internal storage coming from CM so backup what you want to save.
Just a warning, if you flash anything newer than OA6, you will not be able to flash back to older firmwares.
http://forum.xda-developers.com/sprint-galaxy-s5/development
Click to expand...
Click to collapse
I'm getting confused with the different requirements listed...kernels, bootloaders, etc. Can you point me to a specific post/file that I can flash in odin to get everything back to normal? Thank you.
Stock Android 7.0 (Nougat) for the Moto X Pure 2015 XT1575 US NPH25.200-22
TWRP Recovery Image (Includes /boot and /system only)
**Factory reset after restore is advised.**
https://drive.google.com/drive/folders/0B2lKWOIH0bTqc29NbVNWWWhsYVE?usp=sharing
**Not tested coming straight from stock 6.0 MPH24.49-18-16.**
I did an incremental OTA upgrade from stock 6.0 MPH24.49-18-8.
Use at your own risk. If you have TWRP installed your warranty is void anyway. I'm not responsible for bricking your device.
worked great for me 18-16 thanks really appropriate the work
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
the-light said:
Hi
and thx for sharing.
I have unlocked booloader and rooted, can I just flash this one with twrp?
thx in advance
Click to expand...
Click to collapse
Yes. Root is nonconsequential. You really just need twrp.
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
newHere:) said:
Can i just flash it over TruPureX Android 6?
(I guess i can, just want to be sure)
Where can I find Android 7 modem to flash separately?
Will it work with Android 6 modem?
Click to expand...
Click to collapse
No Nougat modem is available until the flashable (non OTA) full stock 7.0 rom is made available from Motorola. This is not likely to happen. No issues have been mentioned running this update on a 6.0 modem. Not sure what the advantages are honestly. I never had problems with bt, wifi, or calls with the 6.0 modem firmware.
Create a backup beforehand and you can always go back to it.
hi i noob, i speak spanish.
I have moto x pure clark xt1575, android 6 no root, i install twrp an unlock bootloader.
I try to install this "ota" room, but fail. i restore back up and now the phone follow work
mphs24.49-18-16.
Need help how instal android 7 official, or only way custom room "lineage 14"
Thanks.
Can I flash this over Lineage OS 14.1 after a full wipe?
acoupleofdroids said:
worked great for me 18-16 thanks really appropriate the work
Click to expand...
Click to collapse
Hi talk about u experience
Greetings, it counts as you did, I have android 6.0 mphs24.49-18-16 and I can not update. Phone with bootloader unlocked and with twrp, no root
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
bussemac said:
I get "invalid ZIP file format" using TWRP 3.1.1-0 on an XT1575. Was running lineageOS 14.1 but I wiped system and data before trying to install the zip. On my laptop I can open the ZIP fine and extract the files, but that doesn't help.
Click to expand...
Click to collapse
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Will this work with XT1572? Just confirming.
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
stevejohnson42 said:
See this thread :
https://forum.xda-developers.com/moto-x-style/general/guide-xt1575-update-to-nph25-200-22-t3680477
The OP will need to comment - he may be coming from a rooted stock ; at least according the the thread noted above - if you have installed a custom ROM ; there are other steps besides just trying to flash this
I have NOT tried the OP's method or the referenced thread - so I cannot really speak from experience ; just pointing out other resources that have additional information -
Click to expand...
Click to collapse
kelru2000 said:
This is not a traditional TWRP zip file. It is a backup file. You need to unzip it and put it in the backup directory. You then restore backup, choose the nph25-200-22. . . directory, and away you go!
Click to expand...
Click to collapse
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
bussemac said:
Ah, sure, OK, that makes sense, just wish that had been explained somewhere. I'll give that a shot tonight, thanks!
Click to expand...
Click to collapse
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
ptn107 said:
Success? Some people have reported bootloops due to a firmware problem. I'd like to know how it went.
Click to expand...
Click to collapse
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
bussemac said:
Well it worked, sort of. It booted to stock but it wasn't stable and the play store kept crashing, I tried all the usual stuff for that, clear services & play store data, uninstall updates, finally tried a factory reset and now I'm stuck in TWRP bootloop, even if I reinstall this image.
So very much YMMV.
Click to expand...
Click to collapse
Thankfully the 7.0 stock firmware is available now. I wiped and clean flashed it and it works perfectly.
https://forum.xda-developers.com/moto-x-style/general/xt1575-moto-x-pure-edition-factory-t3704142
the link is dead
someone can help, sharing a new link? thank you