Please guide in TWRP 2.8.7.0 Moto G XT1033 - Moto G Q&A, Help & Troubleshooting

HI,
I am trying to install CM13 on my Moto G XT 1033.
When I do advanced wipe from TWRP 2.8.7.0 ( Data, system, dalvik cache and cache), the phone just reboots as soon as the wipe is finished and after the reboot, the phone is just normal - as in I can see nothing is changed in my previous ROM with all the previosuly installed apps working as it is.
Is this normal behavior ? In various youtube videos, I see after doing advanced wipe - you are taken to the TWRP home page , the phone doesnt reboot.
Please Advice.

Related

[Q] Problem booting custom image [A510]

Hi, this is the first android device I have played with so naturally I managed to mess it up.
The problem is with an Iconia A510, wrong forum but didnt find a Q&A for A510 so I tried here instead.
I rooted and installed CWM recovery. The custom firmware I have tried or stopped during boot and rebooted the device. Booted for 10-20 seconds, I see the animated logos before it reboots.
I upgrade with:
wipe data/factory reset
wipe cache
advanced -> format /system
advanced -> format /data
advanced -> format /cache
install zip from sdcard -> external sdcard
Am I doing something wrong with the upgrade? Can I upgrade CWM from inside CWM so I can try the latest Android version? Is there a firmware version that will work?
Info:
Files from: acer shreps fr
CWM version: CWM Recovery v6.0.1.9 by NoThrills for A510 tablets. Apparently can try KitKat with it, so only tried older Android.
All installed OK but stopped during boot:
7comp-JB-a510-Nightly-20130808
aokp_a510_jb-mr2_unofficial_2013-12-05
cm-10.1.3-20130925-UNOFFICIAL-a510
cm-10.2-20130826-UNOFFICIAL-a510
cm-10.2.1-20140201-UNOFFICIAL-a510
pa_a510-4.1-BETA2-20140315
did you try to wipe data or/and dalvik cache after you installed the rom? (DONT WIPE SYSTEM!)
sometimes this will work for me.
graafschap101 said:
did you try to wipe data or/and dalvik cache after you installed the rom? (DONT WIPE SYSTEM!)
sometimes this will work for me.
Click to expand...
Click to collapse
Thanks for the tip. I tried wiping the usual suspects, flashing a CM rom and then flash data and dalvik cache. Same thing; started booting, the CM logo comes up and starts spinning before it freezes and reboots.
I'll play around a bit more. Tried the 'fix permissions' in CWM recovery, no go.
Solved it. Formatted everything except external_sdcard, flashed with AOKP and booted fine. Magic!

[Completed] [Q] Need help... phone goes into bootloop - xolo q800

I tried to install custom rom given in this thread http://forum.xda-developers.com/showthread.php?t=2729379 FOR Xolo Q800. But I don't know what I did wrong & now my phone doesn't start. Steps that I followed -
1) Installed CWM Recovery & rooted the phone. http://xolohub.blogspot.in/2013/11/how-to-install-cwm-twrp-recovery-on_16.html
2) Then I went into recovery mode and did
a) wipe data/factory reset
b) wipe cache
I didn't clear Dalvik cache because whenever I clicked on wipe dalvik cache, it refreshed the screen so I skipped it.:silly:
3) Installed zip from sd card & it went fine but when I restarted phone, it went into bootloop :crying:
Then I searched on google & followed some steps to get out of bootloop but unfortunately it did not work. Steps that I followed -
1) Went into recovery
2) then mount from usb mode and copied over the same rom from PC, wiped every thing 3 times (wipe data/factory reset, wipe cache, format data, format system, format cache, wipe dalvik cache) all of it (This time wipe dalvik cache worked).
3) installed custom rom again but still did not work.
Couple of things -
Whenever I reinstalled new rom & tried to reboot my phone, I got message "rom may flash stock recovery on boot THIS CAN NOT BE UNDONE" then i have the options of - no, - yes disable recovery flash, and - go back. No matter which one I choose (including - go back) my phone reboots & goes into bootloop
I have around 400 mb free on my sd card after I copied custom rom. Can this be a problem?
Please help & get me out of this thing.
gaurav14u said:
I tried to install custom rom given in this thread http://forum.xda-developers.com/showthread.php?t=2729379 FOR Xolo Q800. But I don't know what I did wrong & now my phone doesn't start. Steps that I followed -
1) Installed CWM Recovery & rooted the phone. http://xolohub.blogspot.in/2013/11/how-to-install-cwm-twrp-recovery-on_16.html
2) Then I went into recovery mode and did
a) wipe data/factory reset
b) wipe cache
I didn't clear Dalvik cache because whenever I clicked on wipe dalvik cache, it refreshed the screen so I skipped it.:silly:
3) Installed zip from sd card & it went fine but when I restarted phone, it went into bootloop :crying:
Then I searched on google & followed some steps to get out of bootloop but unfortunately it did not work. Steps that I followed -
1) Went into recovery
2) then mount from usb mode and copied over the same rom from PC, wiped every thing 3 times (wipe data/factory reset, wipe cache, format data, format system, format cache, wipe dalvik cache) all of it (This time wipe dalvik cache worked).
3) installed custom rom again but still did not work.
Couple of things -
Whenever I reinstalled new rom & tried to reboot my phone, I got message "rom may flash stock recovery on boot THIS CAN NOT BE UNDONE" then i have the options of - no, - yes disable recovery flash, and - go back. No matter which one I choose (including - go back) my phone reboots & goes into bootloop
I have around 400 mb free on my sd card after I copied custom rom. Can this be a problem?
Please help & get me out of this thing.
Click to expand...
Click to collapse
Maybe you have to do a factory reset (wipe data).
But better to ask in the corresponding Q&A thread: [Q&A] [XPERIA][4.4.2-LIKE] PureXperia Z2 v4.3.5 FOR Xolo Q700/Q700i/Q800/Fly iq446/A.
There you should get better answers.
Good luck !
It_ler said:
Maybe you have to do a factory reset (wipe data).
But better to ask in the corresponding Q&A thread: [Q&A] [XPERIA][4.4.2-LIKE] PureXperia Z2 v4.3.5 FOR Xolo Q700/Q700i/Q800/Fly iq446/A.
There you should get better answers.
Good luck !
Click to expand...
Click to collapse
I actually did factory reset before reinstalling it but didn't work. Now I installed another rom (Baidu) & thankfully it worked for me. Not sure if the problem was with PureXperia rom or with my phone
Thanks for letting us know. Thread closed.

CyanogenMod 12.1 On Moto G 4G Won't Boot?

Hello all, I am relatively new to the android scene, and have just tried flashing my first rom, but something has gone horribly wrong.
Here is my exact scenario. Previously, I had stock rom with root. I created a nandroid, downloaded the latest cm nightly, and started my job. Used 'adb push cm-12.1-peregrine.zip /sdcard/', which succeeded, then booted into CWM 6.0.5.0. Wiped data, wiped cache, cleared davlik cache, install from zip, and it succeeded. Here's where the issue is. I rebooted device, and it sat for a good 30 mins just loading. Eventually gave up, tried wiping those things again and then reflashing. Still no cigar. After what little google-fu I have, I tried wiping those things AFTER flashing, and still nothing. Please advise.
Thanks, Mathracer1
I'm having exactly the same problem on my Gen 1 Moto G falcon (3G). I've tried wiping and reloading over and over.
I've tried just the falcon 12.1 snapshot
I've tried the falcon 12.1 snapshot with my selection of google apps (aroma) compiled for Android 5.1 ARM
I've tried the falcon 12.1 snapshot with google apps pico compiled for Android 5.1 ARM
I've tried falcon 12.1 snapshot after just the factory reset
I've tried falcon 12.1 snapshot after the factory reset, followed by wiping the Dalvik Cache, Data, Cache, and System partitions
I've tried re-downloading the falcon 12.1 snapshot
I've tried with and without wiping the Dalvik cache and the cache after the install, before the reboot.
I've tried reflashing the TWRP 2.8.6 recovery
I've tried waving a rubber chicken over the Moto G and chanting
I've tried waving a real, live chicken over the Moto G and chanting
I've tried a few combinations of the above
I got a little scared when TWRP would not boot, even after reflashing it, but that is another story...
Has anyone got CM 12.1 peregrine or falcon to work on the Gen 1 (2013) Moto G?
John E. Mayorga
TWRP > Format Data > Yes

[Q] can't flash custom rom with TWRP after my brother do the factory reset

i used slim lollipop on my device , suddenly my brother do factory reset via twrp
after that , it makes random reboot
reboot to desktop and reboot again in a few second
i try wipe everything like system, data, cache , dalvik and internal
but that can't erase them
my data and internal still there
i try to flash new rom but it still slim lollipop with random reboot
any solution? please help
thanks

[Completed] Forgot to clear cache before flashing custom rom

I was trying to flash Microkat v1.0 in my moto g 2014 which had 5.0.2.
I didn't clear any cache. I just created a recovery using twrp and installed the the rom.
And then, I reboot my phone.
It has been around 40 minutes and it's still trying to boot.
Please help me
Hi,
Thanks for using XDA Assist.
Reboot into recovery and start from scratch: wipe data, cache, dalvik cache and system then flash your custom rom.
Good luck!

Categories

Resources