[Completed] Forgot to clear cache before flashing custom rom - XDA Assist

I was trying to flash Microkat v1.0 in my moto g 2014 which had 5.0.2.
I didn't clear any cache. I just created a recovery using twrp and installed the the rom.
And then, I reboot my phone.
It has been around 40 minutes and it's still trying to boot.
Please help me

Hi,
Thanks for using XDA Assist.
Reboot into recovery and start from scratch: wipe data, cache, dalvik cache and system then flash your custom rom.
Good luck!

Related

Help me save my TF101

Well I dont think I totally screwed it up because I am able to get to the recovery but here is the scoop.
I decided I was going to root and install jellybean. So I used the 1 click method to root from [TOOL]"1-Click Transformer Root"-Root/Unroot/cwm/stock rec-TF101(G)/201/300T(G)/SL101 - xda-developers
I did the 1.1 verison. All went well tablet was rooted my stock rom still worked fine.
Then I went to flash jellybean rom which i did this one here v6.0 [ROM][JB][4.1.1] AOSP build #6.0.0 - xda-developers
Before i flashed i made a nand back up. and wiped all cache.
After install of RaymanFX's jellybean rom it got stuck after the splash animation.
I then tried to reflash it. Only to see the same result.
So I cleared all the cache again and ran the nand backup i made now i am stuck at asus splash screen.
Someone please tell me what i am missing.
Thank you in advance for any help.
Copy this ROM to your SDcard or MicroSD card, whichever one you used to hold the ROM the first time
http://downloads.timduru.org/android/tf101/eos4/EOS4.2.2-tf101-20130408_previewB190.zip
Copy these Gapps to the same place
http://goo.im/devs/teameos/roms/eos4/gapps/gapps_4.2.2_TF101_20130323b.zip
Copy this Kernel to the same place
http://downloads.timduru.org/android/tf101/K.A.T/kernel/Tim_KatKernel_102_JB4.2_Lidpatch.zip
Boot into Recovery, Wipe System, Cache and Dalvik Cache
Flash the ROM
Wipe Cache and Dalvik Cache only
Flash the Kernel
Wipe Cache and Dalvik Cache only
Flash Gapps
Wipe Cache and Dalvik Cache only
Reboot
All being well, you will boot into EOS4 (Jellybean 4.2.2)
Also, this tool is the best way to root / flash custom recovery and to unbrick
http://forum.xda-developers.com/showthread.php?t=1688012

[Q] boot loop every rom

So uhh, I unlocked the bootloader.
Flashed CWM Recovery.
and now I was on the point to install a rom..
factory wipe + cache wipe
format system
flash rom (tried cwm and Beanstalk)
flash gapps ("Gapps_Standard" from http://forum.xda-developers.com/show....php?t=2012857) (also tried those by developers)
wipe dalvik
reboot > bootloop.
Also tried to wipe everything again.
well, no luck
keep getting bootloop.
help please?
P.S.
I know how to flash a rom...
P.P.S
Moto G 4.4.2 Repack (stock) works.
But no wifi...
Me too bro....
Jur13n said:
So uhh, I unlocked the bootloader.
Flashed CWM Recovery.
and now I was on the point to install a rom..
factory wipe + cache wipe
format system
flash rom (tried cwm and Beanstalk)
flash gapps ("Gapps_Standard" from http://forum.xda-developers.com/show....php?t=2012857) (also tried those by developers)
wipe dalvik
reboot > bootloop.
Also tried to wipe everything again.
well, no luck
keep getting bootloop.
help please?
P.S.
I know how to flash a rom...
P.P.S
Moto G 4.4.2 Repack (stock) works.
But no wifi...
Click to expand...
Click to collapse
Yeah Bro I have this exact problem, except i made a backup and my wifi is working fine now. One thing tho i cannot connect to google servers and when i boot up it says inconsistent UID's device may not work properly format your data partition(formatted it and yah nothing)
cated resionit
Jur13n said:
So uhh, I unlocked the bootloader.
Flashed CWM Recovery.
and now I was on the point to install a rom..
factory wipe + cache wipe
format system
flash rom (tried cwm and Beanstalk)
flash gapps ("Gapps_Standard" from http://forum.xda-developers.com/show....php?t=2012857) (also tried those by developers)
wipe dalvik
reboot > bootloop.
Also tried to wipe everything again.
well, no luck
keep getting bootloop.
help please?
P.S.
I know how to flash a rom...
P.P.S
Moto G 4.4.2 Repack (stock) works.
But no wifi...
Click to expand...
Click to collapse
For no-wifi problem try to flash the rom from page 9 in repack thread. Work for me.

[Completed] how to wipe dalvik cache

Hello,
i am trying to put kitkat 4.4.4 onto my Xoom MZ604. whilst using trwp the program says that it has failed to wipe dalvik.
do you have any advise to correct this error?
thank you,
steven
Please do a Factory Reset in TWRP and then select Dalvik Cache as one to be wiped from Wipe menu.

[Completed] Lgf160k rom

I have a LG F160K. I have rooted it and installed CWM recovery. Can someone please tell me how do I flash a custom Rom in it. Is there any lollipop based ROM for it?
Hi,
Thanks for using XDA Assist.
To flash a custom rom:
1. Reboot into CWM
2. Wipe data/factory reset + cache + dalvik cache and format /system partition.
3. Flash the zip file of your custom rom
4. Reboot.
There's no dedicated forum for your device but you can eep an eye out in the general development section here: http://forum.xda-developers.com/android/development

[Completed] format mounts/storage in cwm recovery

im installing custom rom in my micromax a120.. i format dalvik cache, cache and mounts/storage to. then rom not installing it stuck on logo screen. i tried to flash stock rom but its also stuck on logo screen. please help me out.
ankurgiri65 said:
im installing custom rom in my micromax a120.. i format dalvik cache, cache and mounts/storage to. then rom not installing it stuck on logo screen. i tried to flash stock rom but its also stuck on logo screen. please help me out.
Click to expand...
Click to collapse
Hello and welcome to XDA-developers!
You have to do all required steps to flash custom/stock ROM.
1. Factory reset
2. Wipe System, Data, Cache/dalvik
3. Flash ROM
4. Reboot
FSadino said:
Hello and welcome to XDA-developers!
You have to do all required steps to flash custom/stock ROM.
1. Factory reset
2. Wipe System, Data, Cache/dalvik
3. Flash ROM
4. Reboot
Click to expand...
Click to collapse
i tried but not working....

Categories

Resources