Related
i just recently S-OFF through Rumrunner and i was wondering if im able to install maximusHD 10 (sense 5 + android 4.2). I'm not sure if hboot 2.16 is required, since im S-OFF with hboot 2.15. thanks.
xPhrosty said:
i just recently S-OFF through Rumrunner and i was wondering if im able to install maximusHD 10 (sense 5 + android 4.2). I'm not sure if hboot 2.16 is required, since im S-OFF with hboot 2.15. thanks.
Click to expand...
Click to collapse
Part of the install instructions for MaximusHD is updating your hboot version from 2.15 to 2.16. So yes, 2.15 is correct for now. When you go to download the ROM there are 2 files, the ROM and the installer package. The installer package contains the firmware (this is what updates the hboot to 2.16) and the recovery. This is why the instructions are a little complicated. Basically you have to flash the rom first, then flash the firmware, then flash the recovery, then flash the ROM again. Just note, you can not mount storage in TWRP recovery for 2.16. Also, if you are a stock android fan then stay on 2.15 if you want to have a greater choice of ROM's. Currently I think the only AOSP based ROM that supports the 2.16 hboot is CM11.
Sent from my Nexus 7 using XDA Premium 4 mobile app
rosswhite said:
Part of the install instructions for MaximusHD is updating your hboot version from 2.15 to 2.16. So yes, 2.15 is correct for now. When you go to download the ROM there are 2 files, the ROM and the installer package. The installer package contains the firmware (this is what updates the hboot to 2.16) and the recovery. This is why the instructions are a little complicated. Basically you have to flash the rom first, then flash the firmware, then flash the recovery, then flash the ROM again. Just note, you can not mount storage in TWRP recovery for 2.16. Also, if you are a stock android fan then stay on 2.15 if you want to have a greater choice of ROM's. Currently I think the only AOSP based ROM that supports the 2.16 hboot is CM11.
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
okay, that makes much more sense now. thanks a lot!
Hello,
i'm having a lot of trouble with the viper made rom ( http://forum.xda-developers.com/showthread.php?t=2667758). I'm new here, so i cannot post it there.
My problems began when i try to install the updates. I have installed the original rom version 3.0.0. i get the OTA message, but when i try to install it in recovery, the phone can't mount the sd card, and the installation doesn't continu. I tried to do it manually (using the download link i found in one of the posts) and that seemed to work.
Then i got another OTA notification, to upgrade to version 3.1.0, but when i tried to boot after the installation, i couldn't enter my sim pincode, and when i reboot, the phone keeps looping. I have to install the original rom twice (once with and one time without wiping) before the ROM boots normally.
What am i doing wrong?
i'm on Hboot 1.25 and radio:1.15.50.05.29
I'm S-on (RL)
It seems that viper made a fll rom, with the updates included.
Wrong Hboot?
Martin_Weterholt said:
Hello,
What am i doing wrong?
i'm on Hboot 1.25 and radio:1.15.50.05.29
I'm S-on (RL)
Click to expand...
Click to collapse
I'm not sure but i think it starts with your Hboot, maybe one of the older members can verify, but according to the rom it requires Hboot version 2.15 or 2.16.
I am in the process of updating my Hboot by downloading and flashing the RUU as well as achieving S-OFF status
fidodaj said:
I'm not sure but i think it starts with your Hboot, maybe one of the older members can verify, but according to the rom it requires Hboot version 2.15 or 2.16.
I am in the process of updating my Hboot by downloading and flashing the RUU as well as achieving S-OFF status
Click to expand...
Click to collapse
You need to update hboot first
2.15 is most compatible i suppose
LS.xD said:
You need to update hboot first
2.15 is most compatible i suppose
Click to expand...
Click to collapse
Question. Is there a way for me to upgrade the hboot without the ruu wiping everything? Or will I just have to make a backup. I plan to go s-off before upgrading the hboot.
fidodaj said:
Question. Is there a way for me to upgrade the hboot without the ruu wiping everything? Or will I just have to make a backup. I plan to go s-off before upgrading the hboot.
Click to expand...
Click to collapse
If you're S-OFF ist possible I think
No, you don't need to update the hboot. I am on 1.06 and Viper works fine...in fact any ROM works fine for me but that's another story. The updated firmware (2.13 or 2.15) is required only for Android 4.4.x KitKat due to a check present in the updater-script. There's no such check nor requirement for previous Android versions and Viper 3.x is based on Android 4.2.2
The problems first could come from not being S-Off...this makes impossible to flash the kernel from recovery so any OTA that has a kernel is not flashed properly. I remember that 3.1.0 has also a full ROM ZIP, maybe is good if you flash that one from recovery and flash the kernel after that in fastboot. Also it could matter the recovery you're using, I would recommend latest TWRP
Sent from nowhere over the air..
Rapier said:
No, you don't need to update the hboot. I am on 1.06 and Viper works fine...in fact any ROM works fine for me but that's another story. The updated firmware (2.13 or 2.15) is required only for Android 4.4.x KitKat due to a check present in the updater-script. There's no such check nor requirement for previous Android versions and Viper 3.x is based on Android 4.2.2
..
Click to expand...
Click to collapse
In the viper rom forum post it says ROM firmware required hboot 2.15/2.16.. Am I to j just ignore tha? Or is it that it is only required that hboot (2.15/2.16) if you are s-on and s-off can do whatever you like? Lol
You need hboot 2.16 for Radio 1.20
And to Flash hboot 2.16 you will need S-OFF
Sent from my loved HTC One S using (most time buggy) Tapatalk
LS.xD said:
You need hboot 2.16 for Radio 1.20
And to Flash hboot 2.16 you will need S-OFF
Sent from my loved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
Actually I'm on hboot 2.15 with Radio 1.20.XX
I know this doesn't help... just saying..
To contribute smth. To get the most out of the Viper 3 Rom, everyone should upgrade their Radio to 1.20.XX. And this is actually why you need to S-OFF.
hello, i am new to HTC One S and my device is completely stock now. I have hboot 2.15..
I want to lock the bootloader, install a custom recovery, s-off and install a custom rom.
I have some questions now:
1. Is it possible to install a 4.4.2 rom with this hboot?
2. Why do i need s-off for sense 5.x?
3. Why do i have to flash boot.img? And why do i not have to flash a boot.img with s-off? Where do i get the boot.img for the rom i flashed?
MICH_** said:
hello, i am new to HTC One S and my device is completely stock now. I have hboot 2.15..
I want to lock the bootloader, install a custom recovery, s-off and install a custom rom.
I have some questions now:
1. Is it possible to install a 4.4.2 rom with this hboot?
2. Why do i need s-off for sense 5.x?
3. Why do i have to flash boot.img? And why do i not have to flash a boot.img with s-off? Where do i get the boot.img for the rom i flashed?
Click to expand...
Click to collapse
1: I run CM11 which is 4.4.
2: Don't know but not sure if there is a 4.4 ROM with Sense 5.
3: The boot.img is in the ROM zip - just unzip it and the boot.img is there. When you are S-OFF the boot.img is flashed with the zip. Otherwise you have to do it manually if you are not S-OFF.
I am no expert but one thing I know - life got a lot easier being S-OFF with the HTC ONE S.
808phone said:
1: I run CM11 which is 4.4.
2: Don't know but not sure if there is a 4.4 ROM with Sense 5.
3: The boot.img is in the ROM zip - just unzip it and the boot.img is there. When you are S-OFF the boot.img is flashed with the zip. Otherwise you have to do it manually if you are not S-OFF.
I am no expert but one thing I know - life got a lot easier being S-OFF with the HTC ONE S.
Click to expand...
Click to collapse
Are you on hboot 2.15 too? Did you update your firmware?
No but there are sense 5.5 roms with android 4.3....
How did you get S-OFF? And which tutorial did you use to unlock etc?
MICH_** said:
hello, i am new to HTC One S and my device is completely stock now. I have hboot 2.15..
I want to lock the bootloader, install a custom recovery, s-off and install a custom rom.
I have some questions now:
1. Is it possible to install a 4.4.2 rom with this hboot?
2. Why do i need s-off for sense 5.x?
3. Why do i have to flash boot.img? And why do i not have to flash a boot.img with s-off? Where do i get the boot.img for the rom i flashed?
Click to expand...
Click to collapse
Let's take one by one...
1. Yes. Currently only AOSP ROMs are with Android 4.4.2, there's no Sense based one (but it's been working on it)
2. Well, that's a tricky question...You don't need S-Off for sense 5.x BUT...only ROM with sense 5.5 is Liberty (by bilal_liberty). If you're not S-Off you can't flash radios. If you can't flash radios, you will not have HSPA/HSPA+ mobile data connection with that ROM (and probably with sense 6 and 4.4.2 ROM also). You will get maximum 3G (UMTS) mobile data with your current radio. On the other hand, if you decide to try an AOSP ROM, you won't have that problem there. You can be S-On and have everything working
3. You have to flash boot.img only if you're S-On. Maybe it's better if you read what S-On/S-Off means. On short, if you're S-On, some partitions are read only and you cannot write to them in recovery...most important the radio partition and the kernel/boot partition. So if you're S-On you can't flash the radio and you can't flash the kernel. Kernel has several components (I try to make a simple explanation not entering in the details): modules, ramdisk and the kernel itself. I'll take them one by one:
- modules: most are incorporated in the ROM and have the extension .so. These files are flashed on the device in the /system partition along with the ROM, in recovery. You don't need to be S-Off to have those installed
- ramdisk & kernel: they're both packed in that boot.img and they're generically referred to as "kernel". These are written in a special partition that is read-only for S-On devices while in recovery. Kernel partition is in write-mode only in fastboot. Therefore you must be S-Off to be able to write kernel from recovery OR, you have to write it from fastboot if you're S-On
So, when you flash a ROM ZIP, the install script writes the modules along with the rest of the ROM since those resides on the /system partition then tries to write also the boot.img. But in case you're S-On, it can't. So the only way to do it is from fastboot where you separately flash the boot.img
Now as I give you some info, take some time and read it (TWICE). Then take some time and look for the tutorials here. First thing you should do is to unlock your bootloader via HTC Dev site. Then you can install a recovery and make S-Off (I personally used for that Rumrunner but it's your call)
Before doing anything, install Android SDK and make sure it's properly installed and the drivers are working. You should have a functional ADB/fastboot for any of the above.
Rapier said:
Let's take one by one...
1. Yes. Currently only AOSP ROMs are with Android 4.4.2, there's no Sense based one (but it's been working on it)
2. Well, that's a tricky question...You don't need S-Off for sense 5.x BUT...only ROM with sense 5.5 is Liberty (by bilal_liberty). If you're not S-Off you can't flash radios. If you can't flash radios, you will not have HSPA/HSPA+ mobile data connection with that ROM (and probably with sense 6 and 4.4.2 ROM also). You will get maximum 3G (UMTS) mobile data with your current radio. On the other hand, if you decide to try an AOSP ROM, you won't have that problem there. You can be S-On and have everything working
3. You have to flash boot.img only if you're S-On. Maybe it's better if you read what S-On/S-Off means. On short, if you're S-On, some partitions are read only and you cannot write to them in recovery...most important the radio partition and the kernel/boot partition. So if you're S-On you can't flash the radio and you can't flash the kernel. Kernel has several components (I try to make a simple explanation not entering in the details): modules, ramdisk and the kernel itself. I'll take them one by one:
- modules: most are incorporated in the ROM and have the extension .so. These files are flashed on the device in the /system partition along with the ROM, in recovery. You don't need to be S-Off to have those installed
- ramdisk & kernel: they're both packed in that boot.img and they're generically referred to as "kernel". These are written in a special partition that is read-only for S-On devices while in recovery. Kernel partition is in write-mode only in fastboot. Therefore you must be S-Off to be able to write kernel from recovery OR, you have to write it from fastboot if you're S-On
So, when you flash a ROM ZIP, the install script writes the modules along with the rest of the ROM since those resides on the /system partition then tries to write also the boot.img. But in case you're S-On, it can't. So the only way to do it is from fastboot where you separately flash the boot.img
Now as I give you some info, take some time and read it (TWICE). Then take some time and look for the tutorials here. First thing you should do is to unlock your bootloader via HTC Dev site. Then you can install a recovery and make S-Off (I personally used for that Rumrunner but it's your call)
Before doing anything, install Android SDK and make sure it's properly installed and the drivers are working. You should have a functional ADB/fastboot for any of the above.
Click to expand...
Click to collapse
2. So i have to update my firmware, right?
3. okay, i understood everything.. thank you
Why do i need the complete SDK? Doesn´t it work just with the adb and fastboot drivers?
MICH_** said:
2. So i have to update my firmware, right?
3. okay, i understood everything.. thank you
Why do i need the complete SDK? Doesn´t it work just with the adb and fastboot drivers?
Click to expand...
Click to collapse
You don't have to upgrade the firmware since you're on the latest official one. 2.16 is an unofficial leaked firmware and you only need it if you want to flash MaximusHD or MagioRom
You don't need entire SDK but I thought it's easier since is an install package for that. Of course, if you don't build for Android, you don't need the libraries, just the tools
Sent from nowhere over the air...
Rapier said:
You don't have to upgrade the firmware since you're on the latest official one. 2.16 is an unofficial leaked firmware and you only need it if you want to flash MaximusHD or MagioRom
You don't need entire SDK but I thought it's easier since is an install package for that. Of course, if you don't build for Android, you don't need the libraries, just the tools
Sent from nowhere over the air...
Click to expand...
Click to collapse
could you give me a good tutorial for unlocking the bootloader, s-off, flash this leaked firmware and super-CID please?
Okay, i unlocked the bootloader, installed TWRP, flashed a custom rom and now i am trying to get s-off...
MICH_** said:
could you give me a good tutorial for unlocking the bootloader, s-off, flash this leaked firmware and super-CID please?
Okay, i unlocked the bootloader, installed TWRP, flashed a custom rom and now i am trying to get s-off...
Click to expand...
Click to collapse
For firmware ZIPs you can flash in recovery AFTER you make S-Off, check HERE. For S-Off I used Rumrunner cause it seems to me much easier and without so many steps...it's something like a one-click operation
Rapier said:
For firmware ZIPs you can flash in recovery AFTER you make S-Off, check HERE. For S-Off I used Rumrunner cause it seems to me much easier and without so many steps...it's something like a one-click operation
Click to expand...
Click to collapse
Rumrunner is running now
I will update my firmware tomorrow i think..
If i update the firmware with this tutorial from Maxiums 10.0 rom. Do i have hboot 2.16? Am i still able to run roms for 2.15 hboot?
MICH_** said:
Rumrunner is running now
I will update my firmware tomorrow i think..
If i update the firmware with this tutorial from Maxiums 10.0 rom. Do i have hboot 2.16? Am i still able to run roms for 2.15 hboot?
Click to expand...
Click to collapse
I didn't checked the MaximusHD tutorial but I strongly suggest you to just flash the firmware zip if you want to do an upgrade/downgrade of the firmware. Most tutorials assume you're initial S-Off and include also some steps for how to acquire this or going through RUUs.
OK..I've read the MaximusHD tutorial, it's pretty much identical with the one made by Flashalot...so the answer is YES, you can use it and after that you would have hboot 2.16. Please also note that a different recovery must be used with 2.16 ROMs. But you'll have that in the MaximusHD instructions as well
NO, you can't run or flash ROMs made for 2.15 firmware after doing this. You should downgrade the firmware to 2.15 first, by using the instructions and the firmware ZIP from the thread I've linked
Rapier said:
I didn't checked the MaximusHD tutorial but I strongly suggest you to just flash the firmware zip if you want to do an upgrade/downgrade of the firmware. Most tutorials assume you're initial S-Off and include also some steps for how to acquire this or going through RUUs.
OK..I've read the MaximusHD tutorial, it's pretty much identical with the one made by Flashalot...so the answer is YES, you can use it and after that you would have hboot 2.16. Please also note that a different recovery must be used with 2.16 ROMs. But you'll have that in the MaximusHD instructions as well
NO, you can't run or flash ROMs made for 2.15 firmware after doing this. You should downgrade the firmware to 2.15 first, by using the instructions and the firmware ZIP from the thread I've linked
Click to expand...
Click to collapse
could you please give me a link to a recovery that is compatible with 2.16? TWRP would be perfect
After installing the new hboot i have still a rom for 2.15 running on my phone. does this work? Does updating the firmware wipe internal storage?
Why do some sense 5 roms work with hboot 2.15 and others not?
MICH_** said:
could you please give me a link to a recovery that is compatible with 2.16? TWRP would be perfect
After installing the new hboot i have still a rom for 2.15 running on my phone. does this work? Does updating the firmware wipe internal storage?
Why do some sense 5 roms work with hboot 2.15 and others not?
Click to expand...
Click to collapse
Oh...you like to ask soo many questions don't you? All these questions are already answered in the threads, why don't you check them?
The main difference between 2.15 and 2.16 hboot/firmware is the partition map. On 2.16 there is no separation between the sdcard and data and you get a single big space for both. This makes more space available to data and sdcard looks bigger (12 GB instead of 10 GB). That's a brief description not entering in details. ROMs made for 2.15 will work on 2.16 and the other way around BUT with issues. Mainly it is about the sdcard size that is not available at all or has an incorect size (48 MB instead of 12/10 GB). So even if your 2.15 ROM is working...try to check if the sdcard is mounted and what space you have on it
So all these being said, your understanding of the word "works" is different from the one of the devs. For them (or for anyone else), a "working" ROM does not mean only it boots, but it's also have all the parts available including sdcard mountable and available on it's entire space, not truncated to 48 MB or not mountable at all.
Now about why some sense 5 ROMs work with 2.15 and some don't. Because some ROMs are based on the leaked 2.16 firmware and those ROMs need the new partition map to properly work. The ones that are working on 2.15 are usually ports or builds made for the standard official HTC firmware.
Link for recoveries compatible with 2.16 hboot you can find in the OP of each 2.16 ROM
Rapier said:
Oh...you like to ask soo many questions don't you? All these questions are already answered in the threads, why don't you check them?
The main difference between 2.15 and 2.16 hboot/firmware is the partition map. On 2.16 there is no separation between the sdcard and data and you get a single big space for both. This makes more space available to data and sdcard looks bigger (12 GB instead of 10 GB). That's a brief description not entering in details. ROMs made for 2.15 will work on 2.16 and the other way around BUT with issues. Mainly it is about the sdcard size that is not available at all or has an incorect size (48 MB instead of 12/10 GB). So even if your 2.15 ROM is working...try to check if the sdcard is mounted and what space you have on it
So all these being said, your understanding of the word "works" is different from the one of the devs. For them (or for anyone else), a "working" ROM does not mean only it boots, but it's also have all the parts available including sdcard mountable and available on it's entire space, not truncated to 48 MB or not mountable at all.
Now about why some sense 5 ROMs work with 2.15 and some don't. Because some ROMs are based on the leaked 2.16 firmware and those ROMs need the new partition map to properly work. The ones that are working on 2.15 are usually ports or builds made for the standard official HTC firmware.
Link for recoveries compatible with 2.16 hboot you can find in the OP of each 2.16 ROM
Click to expand...
Click to collapse
now i have everything i wanted to know tanks
I think i will stay on 2.15 and install ViperOne S 3.1.3 now. This will work on my current setup, right?
I will update the radio. Should i just flash the one attached in the ViperOne S thread in recovery?
MICH_** said:
now i have everything i wanted to know tanks
I think i will stay on 2.15 and install ViperOne S 3.1.3 now. This will work on my current setup, right?
I will update the radio. Should i just flash the one attached in the ViperOne S thread in recovery?
Click to expand...
Click to collapse
Good choice, Viper is a fine ROM and close to the original since it's sense based...also has extra customization that the original ROM doesn't have.
For the radio, well I've answered to you in the Viper thread. I would advice not to flash another radio just now. Flash the ROM, play with it for a few days then decide. If you have no issues with signal reception, wifi and so on, you don't have real reasons to change it.
I had initially (when I bought the device) radio 1.06es (I think)...since then alot of newer versions came out including the 1.20 from the leaked 2.16 firmware and the newest 1.35a from the One XL. To be honest, after several days with each, I've switched back to 1.15 that was the best radio for me.
The only ROM for which you MUST flash a different radio will be Liberty by bilal_liberty. That is based on Android 4.3 and Sense 5.5 and the newest 1.35a radio is needed in order to get H/H+ (HSPA) mobile data connection. If you don't use that radio you'll get maximum 3G (UMTS) connection. The rest will work tho
I still don't understand why I had so many problems with Viper. Dropped calls, random reboots etc...
Once I got CM11 running - never looked back in terms of reliability.
Hey guys I've looked around and I just can't seem to find what I'm looking for, does the hboot version matter? I am on 1.14, but the phone is still s-on , I would like to flash 4.4 roms but I wanted to know if I should ruu to the newer hboot and start from there.
Thanks
Sent from my HTC One S using xda app-developers app
Silentwidow said:
Hey guys I've looked around and I just can't seem to find what I'm looking for, does the hboot version matter? I am on 1.14, but the phone is still s-on , I would like to flash 4.4 roms but I wanted to know if I should ruu to the newer hboot and start from there.
Thanks
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Most of roms are usable on 2.15 hboot and lower (which comes with last ruu), so why not give it a try with your actual hboot ?
I would say you to update your hboot but since it wipes sdcard it's quite annoying
What you can do is make a backup and then try the rom you want, if you notice any issue, restore your backup or update through latest ruu.
For some reasons you'll probably need to manually update the radio to 1.20 or 1.35 (I don't recommend this last one since I had random reboots with it), but you need to s-off. I you do, I advise you to use rumrunner.
benJX said:
Most of roms are usable on 2.15 hboot and lower (which comes with last ruu), so why not give it a try with your actual hboot ?
I would say you to update your hboot but since it wipes sdcard it's quite annoying
What you can do is make a backup and then try the rom you want, if you notice any issue, restore your backup or update through latest ruu.
For some reasons you'll probably need to manually update the radio to 1.20 or 1.35 (I don't recommend this last one since I had random reboots with it), but you need to s-off. I you do, I advise you to use rumrunner.
Click to expand...
Click to collapse
If he's on 1.14 he can't flash a KK ROM unless he's not modifying the updater-script in the ROM zip. The check there gives an error if someone tries to flash a KK ROM on a hboot other than 2.13.0000, 2.13.4444 or 2.15.0000
Rapier said:
If he's on 1.14 he can't flash a KK ROM unless he's not modifying the updater-script in the ROM zip. The check there gives an error if someone tries to flash a KK ROM on a hboot other than 2.13.0000, 2.13.4444 or 2.15.0000
Click to expand...
Click to collapse
Yes on Vanir AOSP I had to do this to make it flashable on 2.16 (btw thx for your guide )
Sent from my ElementalXed One S
This is a comparison between the older Jellybean HBOOT 2.15 and the leaked HBOOT 2.16
HBOOT 2.15 Pros
Supported by about 95% of the HTC One S ROMs around
Ability to mount storage as Mass Storage. TWRP 2.7.x.x and lower
Going S-ON with this HBOOT won't corrupt your SD Card
HBOOT 2.15 Cons
Smaller SD Card partition - 10 GB of Storage
Smaller System partition - 1 GB-ish (Not sure what exact size is)
Older Radio, ADSP, WCNSS and other firmware elements
HBOOT 2.16 Pros
Bigger SD Card Partition - 12.9 GB of Storage
Bigger System Partition - About 1.5 GB - Useful for ported Sense ROMs
Updated Radio and other firmware elements - Better Radio performance, battery life, etc.
Growing support for HBOOT 2.16 ROMs
HBOOT 2.16 Cons
Requires S-OFF to instal
Supported by about 30% of the HTC One S ROMs around
Going S-ON will corrupt your SD Card (Trust me!)
Installation NOT recommended for first time users
As you can see here there is no real advantage of upgrading to HBOOT 2.16 other than the increased partition sizes, but there is not really any disadvantage other than the S-ON SD Card corruption, it does give you slightly better Radio performance though. Anyway, hopefully this will help users decide whether or not to upgrade to HBOOT 2.16
Please tell me more of your pros and cons of each HBOOT that are NOT already listed here and I will include them
Very useful, great idea
Well I'm on HBOOT 2.15.4444 (moonshine hboot) and I have the full set of fastboot oem flash commands. I also manually upgraded to the newer Radio 1.20, with matching WCNSS and ASDP so I'm fine that way. I use CM 11 M10 atm, got to update my signature, and it doesn't support HBOOT 2.16 yet. I dont need the bigger partition sizes, i'm doing just fine for now so I'm sticking with HBOOT 2.15.4444 for the foreseeable future.
This is a good thread idea. But to help users interested I would add a definition of what is an HBOOT...
As I read your post, I see 2 possibilities :
you're talking about the firmware: boot loader + partition layout + recovery + radio + other partitions
or just the boot loader and partition layout
I would say number 2 but this is arguable...
kdd998 said:
This is a good thread idea. But to help users interested I would add a definition of what is an HBOOT...
As I read your post, I see 2 possibilities :
you're talking about the firmware: boot loader + partition layout + recovery + radio + other partitions
or just the boot loader and partition layout
I would say number 2 but this is arguable...
Click to expand...
Click to collapse
Mainy people on this thread refer to hboot 2.16 as the whole firmware (radio, bootloader, adsp, wcnss and parition scemes)
dd98 said:
Mainy people on this thread refer to hboot 2.16 as the whole firmware (radio, bootloader, adsp, wcnss and parition scemes)
Click to expand...
Click to collapse
Well the more technically inclined don't. When they think HBOOT 2.16, they think HBOOT 2.16 firmware that @LlabTooFeR leaked
javelinanddart said:
Well the more technically inclined don't. When they think HBOOT 2.16, they think HBOOT 2.16 firmware that @LlabTooFeR leaked
Click to expand...
Click to collapse
yes thats what im talking about
dd98 said:
HBOOT 2.16 ConsNeed to downgrade to HBOOT 2.15 to run an RUU
Click to expand...
Click to collapse
I have previously run an RUU to downgrade from 2.16 to 2.15. Why would you not be able to run it? I thought it would be the safest method.
rosswhite said:
I have previously run an RUU to downgrade from 2.16 to 2.15. Why would you not be able to run it? I thought it would be the safest method.
Click to expand...
Click to collapse
strangely enough whenever i ran an ruu, i had to re-install hboot 2.15
dd98 said:
strangely enough whenever i ran an ruu, i had to re-install hboot 2.15
Click to expand...
Click to collapse
That's really odd. That shouldn't happen. I can always RUU over HBOOT 2.16 (well not ALWAYS, my computer is broken so....)
Also, as far as I know, only flash Radio, WCNSS, and ASDP from HBOOT 2.16 firmware on 2.15. I've run into issues before.
ability to mount mass storage in TWRP 2.7.1.2 , it works fine on my phone
kingofsurf said:
ability to mount mass storage in TWRP 2.7.1.2 , it works fine on my phone
Click to expand...
Click to collapse
thats only for hboot 2.15 though
dd98 said:
thats only for hboot 2.15 though
Click to expand...
Click to collapse
No it works on 2.16 also
Flashalot said:
No it works on 2.16 also
Click to expand...
Click to collapse
im thinking of modified twrp 2.6.1.0 then
I don't see older radios as a con since the one that come with jb was the best for me plus with s-off you can have any radio.
Sent from my One M8 using Tapatalk
I would like to try to go back to 2.15 because the call quality issue with sense6 drives me crazy. How to do? What ruu should I flash?
kingofsurf said:
I would like to try to go back to 2.15 because the call quality issue with sense6 drives me crazy. How to do? What ruu should I flash?
Click to expand...
Click to collapse
im assuming its a european one s, like mine. just flash this ruu
you need one of the following cids
11111111
HTC__001
How to install hboot 2.16
Can you help me how to install HBOOT 2:16 ???
Plzz...
ShkodranY said:
Can you help me how to install HBOOT 2:16 ???
Plzz...
Click to expand...
Click to collapse
There is a whole Q&A bit just for that or the one thread that has everything you need to flash it.
Sent from my One M8 using Tapatalk
ShkodranY said:
Can you help me how to install HBOOT 2:16 ???
Plzz...
Click to expand...
Click to collapse
You can try my guide here