Anyone know why a rooted S6 with custom rom and kernal won't play nice with the gear vr headset? Specifically the occulus software installer won't kick off.
Is there specific firmware and build/model settings I need. I have the international edition of S6 so wasn't expecting problems.
I think you need a kernel from Samsung to use vr.. Not sure though as I have not rooted my s6 yet.
Skickat från min SM-N910F via Tapatalk
Running full custom over here and working like a charm
XtreStolite 2.4 with unikernel 9 and addon pack installed with Gear VR support.
rajackar said:
Running full custom over here and working like a charm
XtreStolite 2.4 with unikernel 9 and addon pack installed with Gear VR support.
Click to expand...
Click to collapse
Guess I was wrong then [emoji39]
That's good news, as I really want a custom rom on my S6
rajackar said:
Running full custom over here and working like a charm
XtreStolite 2.4 with unikernel 9 and addon pack installed with Gear VR support.
Click to expand...
Click to collapse
Have you noticed any color problems talked about here: https://forums.oculus.com/viewtopic.php?f=62&t=27758
? why don't you post what rom and kernel you're running? why be so vague.
Running fine on Crash rom with arter kernel v. 10
Billyvnilly said:
? why don't you post what rom and kernel you're running? why be so vague.
Running fine on Crash rom with arter kernel v. 10
Click to expand...
Click to collapse
Thanks for the reply 8-D
I'm on Arrow rom v9 and I just tried arter kernel 10; oculus home won't start up for me. I'll have to try crash rom.
Oculus home launches with hacker kernel but I have color issues discussed in my link above.
Ludespeed said:
Have you noticed any color problems talked about here: https://forums.oculus.com/viewtopic.php?f=62&t=27758
Click to expand...
Click to collapse
Yeah, I'm afraid I have that problem.
Thought it was just a limitation of the system. Let's hope we can get that fixed.
Anyone found a custom rom and kernel combination that doesn't have color issues?
Maybe wanam's rom and kernel but i don't try i keep stock rom for the moment
I did a wipe and installed extralite rom with arter v11 kernel; color issues are gone so it's running like stock firmware; so happy now!
Rom link: http://forum.xda-developers.com/galaxy-s6/development/rom-pure-stock-extralite-v1-0-t3232498
Related
Hi guys, I'm running 4.4.2 and I was wondering if there is anyway to theme the stock OS? I mean something like the CM Theme Engine or maybe flashable theme or even an xposed module ? Thanks for your time :laugh:
PS: I'm rooted and I have unlocked the bootloader and flashed a custom recovery ( TWRP )
there's lots of themes in the play store.
simms22 said:
there's lots of themes in the play store.
Click to expand...
Click to collapse
I know that there are many themes in the playstore but the question is how can I apply them since I'm running the stock OS
SilentGTX said:
I know that there are many themes in the playstore but the question is how can I apply them since I'm running the stock OS
Click to expand...
Click to collapse
By flashing a custom ROM or using Xposed
Lethargy said:
By flashing a custom ROM or using Xposed
Click to expand...
Click to collapse
Since I don't want to flash a custom rom ( ATM ) , what xposed module should I be using ?
SilentGTX said:
Since I don't want to flash a custom rom ( ATM ) , what xposed module should I be using ?
Click to expand...
Click to collapse
I don't know, there are one or two Xposed theme engine modules. I don't use them as I use a custom ROM.
Lethargy said:
I don't know, there are one or two Xposed theme engine modules. I don't use them as I use a custom ROM.
Click to expand...
Click to collapse
ok, thank you for you answer :highfive:
Use the xposed module called hk themer.
Why the hell are you on 4.4.2?
I'm on 4.4.2 because it works very well for me , I have got very good performance and battery life
SilentGTX said:
I'm on 4.4.2 because it works very well for me , I have got very good performance and battery life
Click to expand...
Click to collapse
Just update to 4.4.4, claiming that 4.4.2 has better performance and battery life compared to 4.4.4 is silly, it's going to be exactly the same (improvements if anything). Just flash the 4.4.2 radio in fastboot if the 4.4.4 radio isn't good for you ._.
SilentGTX said:
I'm on 4.4.2 because it works very well for me , I have got very good performance and battery life
Click to expand...
Click to collapse
I'm still on 4.4.2 too... haven't felt the need to upgrade yet either. I use HKTheme Manager (xposed module) for applying themes. Make sure to check the search options in settings if your themes aren't showing up.
Hi, guys! I found a working version viper4android for Android 5.0.2, i tested on latest version CyanogenMod 12 and works great! Installation by twrp/cwm
My Viper isn't working!!!
"Did you install by flashing the zip??? Is your apk in priv-app??? Do you have any other conflicting sound mods or eq's??? Is Viper enabled and you have installed the drivers and done a reboot???
Some people have luck adding or changing these lines in their build.prop:
##Viper4android
lpa.decode=false
tunnel.decode=false
lpa.use-stagefright=false
lpa.releaselock=false
Also some music players work better by switching to Compatibility Mode. To do that go to menu, click FX Compatible Mode, then click Compatible. Doing this should cause Viper to only modify media players instead of changing sound system wide. Some users say this helps with battery usage as Viper will only process sound when you want it to."
P.S.:
Lolliviper will install the Viper to priv-app and remove Audio FX, DSP Manager, and Music FX.
The original thread: http://forum.xda-developers.com/google-nexus-5/themes-apps/discussion-viper4android-t2543796
I greet
This doesnt work on touchwiz builds because all of them have a not permissive kernel.
Bruno_Tec said:
This doesnt work on touchwiz builds because all of them have a not permissive kernel.
Click to expand...
Click to collapse
You can Change it using SElinuxModeChanger
Some people tried that and didnt work
---------- Post added at 03:49 PM ---------- Previous post was at 03:48 PM ----------
Its all tried in the thread you link
For me works with Albe95 5.0.1 TW and Audism kernel
kondzio66 said:
For me works with Albe95 5.0.1 TW and Audism kernel
Click to expand...
Click to collapse
Did you do something else other than flashing that kernel and then installing viper?
kernel change
Even with SeLinux Mode Changer, the kernel stays on enforcing mode (in my case atleast where im on stock 5.0.1) (EVEN WHEN MODE WAS CHANGED TO PERMISSIVE) Basically what has to be done is install a SeMode editing friendly kernel inbuilt in a particular rom which i cant find and i can't live without viper4android :crying: :crying:
saw some beta's on a few website. Will try and post the results here.
P.s-Update on this version
selinux-Permissive
installed as priv-app
Installed super quality drivers
result : check ss
Running: Stock android kernel (3.4.x)
ravnit said:
Even with SeLinux Mode Changer, the kernel stays on enforcing mode (in my case atleast where im on stock 5.0.1) (EVEN WHEN MODE WAS CHANGED TO PERMISSIVE) Basically what has to be done is install a SeMode editing friendly kernel inbuilt in a particular rom which i cant find and i can't live without viper4android :crying: :crying:
saw some beta's on a few website. Will try and post the results here.
P.s-Update on this version
selinux-Permissive
installed as priv-app
Installed super quality drivers
result : check ss
Running: Stock android kernel (3.4.x)
Click to expand...
Click to collapse
in the pic it shows that you didnt get to activate viper.
Also, did you get a permissive kernel or did you find a trick to use with stock kernel on tw 5.0.1?
Bruno_Tec said:
in the pic it shows that you didnt get to activate viper.
Also, did you get a permissive kernel or did you find a trick to use with stock kernel on tw 5.0.1?
Click to expand...
Click to collapse
In the pic shown.. yes i activated viper(check the background).. however it still shows abnormal.
yes im using it with stock tw 5.0.1 since i managed to run viper on 4.4.4 stock.. im going to try with a rom now with custom kernel.. wish me luck
ravnit said:
In the pic shown.. yes i activated viper(check the background).. however it still shows abnormal.
yes im using it with stock tw 5.0.1 since i managed to run viper on 4.4.4 stock.. im going to try with a rom now with custom kernel.. wish me luck
Click to expand...
Click to collapse
i dont get what you said about this part "im using it with stock tw 5.0.1 since i managed to run viper on 4.4.4 stock."
are you using viper on tw 5.0.1 because you make it work on 4.4.4? that doesnt make sense.
also, how did you make viper works on tw 5.0.1 ? did you use that apk that changes the kernel to permissive?
did you do something else?
i also installed viper on t2 5.0.1 and get able to click on options but they didnt make any difference to the sound.
also, you said you will try with custom kernels...
does that mean, you make it work with stock ones? (the ones in custom tw 5.0.1 roms)
are there any custom kernel for tw 5.0.1?
Sorry for these lots of questions.
Bruno_Tec said:
i dont get what you said about this part "im using it with stock tw 5.0.1 since i managed to run viper on 4.4.4 stock."
are you using viper on tw 5.0.1 because you make it work on 4.4.4? that doesnt make sense.
also, how did you make viper works on tw 5.0.1 ? did you use that apk that changes the kernel to permissive?
did you do something else?
i also installed viper on t2 5.0.1 and get able to click on options but they didnt make any difference to the sound.
also, you said you will try with custom kernels...
does that mean, you make it work with stock ones? (the ones in custom tw 5.0.1 roms)
are there any custom kernel for tw 5.0.1?
Sorry for these lots of questions.
Click to expand...
Click to collapse
I said that ill try to flash on 5.0.1 since i was able to run viper without any errors on android 4.4.4 which was running stock mernel.
2. No i didnt successfully run the mod and system status remains abnormal inspite of me following every step to install viper
3. When i say custom kernel, PrismBarebone Rom in aurora gives you an option to flash 5 different kernels and i will try to run it in one of those kernels to see if this mod works
sorry if i wasnt clear to elaborate what you had asked for.
Bruno_Tec said:
Did you do something else other than flashing that kernel and then installing viper?
Click to expand...
Click to collapse
Yes, I changed SELinux mode to permissive using SElinuxModeChanger from Google Play
kondzio66 said:
Yes, I changed SELinux mode to permissive using SElinuxModeChanger from Google Play
Click to expand...
Click to collapse
Thanks it works OK.
//->>
still confused, can anyone tell me how it can work in touchwiz lollipop?
jagnik said:
still confused, can anyone tell me how it can work in touchwiz lollipop?
Click to expand...
Click to collapse
It doesnt work on i9500 because viper needs to change the kernel's permissions and it cant be done in stock kernels and we dont have custom kernels . it does work on i9505
Got this working after flashing AEL Kernel but still had to disable my music player's EQ settings own control to get it running.
Sounds awesome! Thank you. :good:
J 3 M said:
Got this working after flashing AEL Kernel but still had to disable my music player's EQ settings own control to get it running.
Sounds awesome! Thank you. :good:
Click to expand...
Click to collapse
Have you tried to run viper with stock tw player?
nazarsokol said:
Have you tried to run viper with stock tw player?
Click to expand...
Click to collapse
Nah I'm not a fan of stock. I use Gone mad music player :good:
J 3 M said:
Nah I'm not a fan of stock. I use Gone mad music player :good:
Click to expand...
Click to collapse
If you can please test and tell me, i don't want to flash kernel at this time . Using PowerAmp and stock with BeatsEQ now.
Not working on Albe95 LolliRom Official 2.0 with ael kernel v3
First off, you do this at your own risk and I'm not responsible for any damage to your phone etc etc. Also, thanks to it's ties with Sound Alive, it won't work with the stock music player unfortunately but I have tested it with both Spotify and GoneMad and it works perfectly with both.
I'm using this on AryaMod 3.1, so this should mean the instructions below work on any N9005ZSUGOA5 based Lollipop rom.
1) Download and install DarkQueen Kernel here. Thank @hiepgia.
2) Add the line "setenforce 0" (without the quotes) to the end of the file /sýstem/etc/init.qcom.post_boot.sh. This will ensure a permissive state on boot. Thanks to @hiepgia and @filchi756 for this.
3) Download and install the new Viper4Android 2.3.4.0 here. Run, install the driver.
4) Find and freeze/delete Sound Alive. This being present is bad in particular for Spotify, which will always use Sound Alive in preference to Viper4Android.
Reboot enjoy Viper goodness.
For people who want to use the stock player, see @filchi756 post here
For people running AyraMod V4.0, ignore the above instructions, select DarkQueen kernel via Aroma on install (this will automatically result in permissive SE) and please see @filchi756's modified zip here. Don't forget to thank him.
Awesome
Finally!
Oh I am seeking for that. :good::good::good:
After flashing this kernel, WiFi stopped working... Anybody else has this issue? SM-N9005
slavko17 said:
After flashing this kernel, WiFi stopped working... Anybody else has this issue? SM-N9005
Click to expand...
Click to collapse
it works fine like a charm
Unfortunately, it won't work for me... As soon as I flash stock kernel back - wifi is working like a charm again. Tried to do factory reset after flashing this Dark Queen Kernel - it didn't solve the problem.
Any suggestions would be appreciated.
slavko17 said:
Unfortunately, it won't work for me... As soon as I flash stock kernel back - wifi is working like a charm again. Tried to do factory reset after flashing this Dark Queen Kernel - it didn't solve the problem.
Any suggestions would be appreciated.
Click to expand...
Click to collapse
We have the same situation. .I think we have to wait for google to release the lollipop sources for note3 and wait for someone to make a custom kernel intended for our phone.
OP updated.
You eventually did it. Well done!
Nice one! Could anybody make it work with the stock Samsung Music Player using this tutorial? It seems this app is deeply integrated with SoundAlive, so at least with KK it was impossible to make it work reliably with V4A. But things may have changed with LL...
Yeah, unfortunately it appears to be the same here. I froze Sound Alive to get Viper working with Spotify, but this results in no effects whatsoever with the stock music player. Personally, this doesn't bother me as there are far better players on the market.
slavko17 said:
After flashing this kernel, WiFi stopped working... Anybody else has this issue? SM-N9005
Click to expand...
Click to collapse
What baseband are you on? You have the same phone model as myself and my wifi works fine. I suspect it might be related to your modem/NON-HLOS.
Overall everything works fine except few bugs from the Darkqueen kernel, like brightness changes sometimes when I lock/unlock the phone.
Attachement selinuxpermissive installation failed :crying:
rafik25 said:
Attachement selinuxpermissive installation failed :crying:
Click to expand...
Click to collapse
What fails? Did you give it full permissions?
Try this one instead.
Beefheart said:
What baseband are you on? You have the same phone model as myself and my wifi works fine. I suspect it might be related to your modem/NON-HLOS.
Click to expand...
Click to collapse
I'm on the newest XEO Lollipop available from sammobile, so the modem version I have is BNL8.
Thanks for trying to help me
I'm on GNH1 myself. Might be worth trying another to see if the WIFI works.
Sir please help us too. I'm using galaxy s4 i9500 with official lollipop installed. we don't have any permissive kernel.
jagnik said:
Sir please help us too. I'm using galaxy s4 i9500 with official lollipop installed. we don't have any permissive kernel.
Click to expand...
Click to collapse
If you're correct and there is no kernel which is either permissive or can be made permissive then Viper is currently unusable on the Exynos variant of the S4. It's currently impossible to use Viper on an enforcing TW ROM.
Hey Guys! So, I want to know that which ROM do you think is the most stable and fast ROM available currently on our device? I prefer speed over features. Also Xposed and ViperFX should preferably work. Am currently on CM 13 but it doesn't over kernel OC.
ALL REPLIES ARE APPRECIATED!!!
Liquid Smooth v3.2 + AGNi Kernel = BEAST
levider said:
Liquid Smooth v3.2 + AGNi Kernel = BEAST
Click to expand...
Click to collapse
Thanks for your opinion, but link please. Also, does Xposed and ViperFX work on it?
LS
http://forum.xda-developers.com/showthread.php?t=2728176
AGNi
http://forum.xda-developers.com/showthread.php?t=2197385
Links are dead, but I can upload it for P3100
My friend has got P3110 rom
Yes, i have Xposed - working very well
I don't using ViperFX, but there is DSP Manager
I think it's similar to ViperFX ;p
levider said:
LS
http://forum.xda-developers.com/showthread.php?t=2728176
AGNi
http://forum.xda-developers.com/showthread.php?t=2197385
Links are dead, but I can upload it for P3100
My friend has got P3110 rom
Yes, i have Xposed - working very well
I don't using ViperFX, but there is DSP Manager
I think it's similar to ViperFX ;p
Click to expand...
Click to collapse
I would appreciate it if you uploaded the link for my P3100. Also, do you have any idea of the score in Antutu. Also, are there any major bugs.
I do not looking at antutu because it depends on too many factors.
Does not show how the phone working on the truth..
I will upload ROM today, later
@edit
https://mega.nz/#!kJ0nDDSA!XwLuwIXlTMi_8acP29_xMcsMZAtkyPV1MDayE69_MEU
Can someone suggest Best Stable and Fastest ROM for p5100
levider said:
I do not looking at antutu because it depends on too many factors.
Does not show how the phone working on the truth..
I will upload ROM today, later
@edit
https://mega.nz/#fm/QAkTmICA
Click to expand...
Click to collapse
Thanks a bunch. Just three questions :
1) Is this ROM a beta build or stable build?
2) Is it 4.4.4 Kitkat?
3) Can I use open gapps with this? If not, what can I use?
akshay1605 said:
Can someone suggest Best Stable and Fastest ROM for p5100
Click to expand...
Click to collapse
SlimKat?
levider said:
I do not looking at antutu because it depends on too many factors.
Does not show how the phone working on the truth..
I will upload ROM today, later
@edit
https://mega.nz/#fm/QAkTmICA
Click to expand...
Click to collapse
Link doesn't work. When I click on the link and login, it just directs me to my own drive. Please fix. I'm very excited to try this ROM out.
adityabanerjee1303 said:
Thanks a bunch. Just three questions :
1) Is this ROM a beta build or stable build?
2) Is it 4.4.4 Kitkat?
3) Can I use open gapps with this? If not, what can I use?
Click to expand...
Click to collapse
1) It's stable
2) Yes
3) Yes. I'm using slim mini gapps
I will upload rom soon, now i have problems with my fck internet ;x
@edit
I forget about key..
https://mega.nz/#!kJ0nDDSA!XwLuwIXlTMi_8acP29_xMcsMZAtkyPV1MDayE69_MEU
levider said:
1) It's stable
2) Yes
3) Yes. I'm using slim mini gapps
I will upload rom soon, now i have problems with my fck internet ;x
@edit
I forget about key..
https://mega.nz/#!kJ0nDDSA!XwLuwIXlTMi_8acP29_xMcsMZAtkyPV1MDayE69_MEU
Click to expand...
Click to collapse
Thank you. Now, just a last one. Can you provide detailed instructions to flash this ROM.
adityabanerjee1303 said:
Thank you. Now, just a last one. Can you provide detailed instructions to flash this ROM.
Click to expand...
Click to collapse
Full wipe (cache/system/dalvik/internal)
Flash ROM and Gapps
Turn on your tablet
Now go to recovery and flash AGNi Kernel
Turn on your tablet and go to agni control application
Gallery FC
levider said:
Full wipe (cache/system/dalvik/internal)
Flash ROM and Gapps
Turn on your tablet
Now go to recovery and flash AGNi Kernel
Turn on your tablet and go to agni control application
Click to expand...
Click to collapse
I installed your ROM but gallery fc. Other than that, its pretty cool.
adityabanerjee1303 said:
I installed your ROM but gallery fc. Other than that, its pretty cool.
Click to expand...
Click to collapse
For me gallery working very well
What's your cpu max frequency in AGNi Control?
Working GREAT now.
levider said:
For me gallery working very well
What's your cpu max frequency in AGNi Control?
Click to expand...
Click to collapse
Okay, now it's working fine. Sorry, before I didn't flash Agni Kernel. AWESOME ROM. BEST KITKAT ROM I'VE EVER USED! I think I'm gonna be sticking to this for a while. Just two things:
1) When I installed ViperFX, it didn't show driver options. Effects are working nonetheless.
2) The ROM has a theme engine built in. What kind of themes can I use???
Hello everyone, I've installed CM11 here with pico gapps, The CM 11 is latest version Nightly. The rom boot and everythings works, but when I try to use some apps, for example: Aida 64,Auditor Kernel, OpenGL Extension Viewr, CPU Z, Task Manager. The Tab 2 anormaly restart, I can't open any app that, the Tab 2 always restart. Have any solution for that ? Or I will need to change for another ROM based on KitKat ?
Thanks
Only apps which require root?
Android-Andi said:
Only apps which require root?
Click to expand...
Click to collapse
No, aida 64 just show all the information of your device..... without root, CPU-Z too
Task manager from ohmi software, when I open it the device restart....
all apps show any information about android + hardware, the device restart :/
thanks for reply
Android-Andi said:
Only apps which require root?
Click to expand...
Click to collapse
Another problem I've found is When I flash blackhawk, dhollmen or any stock kernel form CM11, I get problem everytime ''OS upgrading'' when I reboot, all builds CM11.
I hope it can be fixed on future , thanks Sir for your great work here
hehk1234 said:
Another problem I've found is When I flash blackhawk, dhollmen or any stock kernel form CM11, I get problem everytime ''OS upgrading'' when I reboot, all builds CM11.
I hope it can be fixed on future , thanks Sir for your great work here
Click to expand...
Click to collapse
Custom kernel don't work fine after latest updates, to much stuff changed. Get rid of it.
About the reboot: you switched to ART?
~ All my work, news etc. on http://andi34.github.io ~
Android-Andi said:
Custom kernel don't work fine after latest updates, to much stuff changed. Get rid of it.
About the reboot: you switched to ART?
~ All my work, news etc. on http://andi34.github.io ~
Click to expand...
Click to collapse
No, I didn't switched to ART, only Dalvik.
The CM11 from month 7, don't have the problem with apps show informativo or manager Kernel, the problem begin o latest version on Nightly version.
I test your rom Omni, is very good, don't have any problems here, but I would like to flash custom Kernel or if this possible, I will appreciate if you put Kernel OC on your AOSP. Thanks sir
No. Oc won't be added and i don't say it again.
Like mentioned: custom kernel won't work fine anymore.
I added some information about the difference between the old and new kernel to the faq on my githubuserpage.
~ All my work, news etc. on http://andi34.github.io ~
Android-Andi said:
No. Oc won't be added and i don't say it again.
Like mentioned: custom kernel won't work fine anymore.
I added some information about the difference between the old and new kernel to the faq on my githubuserpage.
~ All my work, news etc. on http://andi34.github.io ~
Click to expand...
Click to collapse
Sir you is the expert with galaxy tab 2, I try to run vainglory and the game of thrones on galaxy tab 2, the vainglory don't enter on game and the game of thrones shows black screen (you can just hear the voices). You know why cause this problem ? I try to see GPU OpenGL library from Razr i XT890, is the same of tab 2 (SGX540) and it have more extension OpenGL and opens the game of thrones with the graphics, vainglory don't open, because it not compatible with X86.
Have any method to you add latest driver or port the library ?
thanks sir
Android-Andi said:
No. Oc won't be added and i don't say it again.
Like mentioned: custom kernel won't work fine anymore.
I added some information about the difference between the old and new kernel to the faq on my githubuserpage.
~ All my work, news etc. on http://andi34.github.io ~
Click to expand...
Click to collapse
Sir, I found the problem with "os upgrading" on CM11. The gapps from opensourcegapps, is not recomend to download it and flash.... I found the gapps perfect for CM11, I Will upload here. The problem is the gapps to make this issue. I found on your builds, CM11 SNAPSHOTT with slimkat (your build), the rom is very amazing, no problems here, everythings works very nice. Thanks sir
hehk1234 said:
Hello everyone, I've installed CM11 here with pico gapps, The CM 11 is latest version Nightly. The rom boot and everythings works, but when I try to use some apps, for example: Aida 64,Auditor Kernel, OpenGL Extension Viewr, CPU Z, Task Manager. The Tab 2 anormaly restart, I can't open any app that, the Tab 2 always restart. Have any solution for that ? Or I will need to change for another ROM based on KitKat ?
Thanks
Click to expand...
Click to collapse
Why wasting your time and the dev's. You have cm13 is very stable you can run multiple apps without any lag or freezing or sudden reboots. I'm using it since a week now without any problem at all everything works perfectly and smoothly no need at all for overclocking
https://www.androidfilehost.com/?fid=24591000424965117
I always use Pico GAPPS you can get download link from Andi files I suggest that you flash the last twrp
https://www.androidfilehost.com/?fid=24591000424963475