Setup wizard has stopped on Cyanogenmod 13 - Moto G Q&A, Help & Troubleshooting

I installed cyanogenmod 13 on my moto g 1st gen (falcon) from cyanogenmod 12.1, Wiping cache and system etc. i also installed the gapps. when i booted it up though, it will not go off of a blck screen and spams me constantly with 'unfortunately, setup wizard has stopped. i have even tried wiping cache and system repeatedly but to no avail. i really do not know what to do. thanks for any help :fingers-crossed:

Please post that in the relevant thread respectively look there. There I've seen posts like that for almost a hundred times

dylanlamp said:
I installed cyanogenmod 13 on my moto g 1st gen (falcon) from cyanogenmod 12.1, Wiping cache and system etc. i also installed the gapps. when i booted it up though, it will not go off of a blck screen and spams me constantly with 'unfortunately, setup wizard has stopped. i have even tried wiping cache and system repeatedly but to no avail. i really do not know what to do. thanks for any help :fingers-crossed:
Click to expand...
Click to collapse
I'm facing same error and another 'Google Play Services has stopped error' after flashing CM13 and GAAPS 6

Related

[Q] e sig verification failure in cwm

First off, i know how many ppl come to these forums and just immediately start asking questions without doing some reading and searching first so I did some reading and researching and after 4 hours, i am going to ask for help. i appreciate any help and apologize if this has already been covered.
i am running cm 10.1.3 and tried to update to the november 3 2013 nightly 10.2.x. when i did i got stuck in the boot loop. so i entered my recovery mode and wiped all data and did the dalvick wipe. then i tried to reinstall cm 10.1.3. when i did all of my apps and data were gone, which i expected. i tried to then download google apps and install it in cwm 6.0.2.3. i am unable to install the zip files bc it keeps giving me an e signature verification failure message. i have tried to install the google apps from 20121212, 20130812, and even 20130813. all of them give me the error. i have tried restarting recovery and wiping data and dalvick before all of those. i know that my cwm is not the most recent version, but am unable or too stupid to update it without having access to google apps.
i have also tried turning the toggle signature verification off and on. nothing is working so far. i can boot into cm 10.1.3 and use messaging and my phone so it's not a complete loss at the moment but would really like to get google apps running on my phone again.
i appreciate any help and the time and patience that'll have with me. if i can get this working i vow to never again try and screw with my phone. have a great day

[Completed] [Q] "Unfortunately com.android.systemui has stopped" when rebooting CM11 Snapshot M5

[Q] "Unfortunately com.android.systemui has stopped" when rebooting CM11 Snapshot M5
I've unlocked the bootloader, rooted my Moto G (xt1032) with superboot and installed CWM recovery on it. So I tried installing Cyanogenmod 11 (cm-11-20140405-SNAPSHOT-M5-falcon.zip at the moment) for my device and initially, everything works fine. It boots pretty smooth and downloads all the apps from the Google Play Store. But when I reboot the device I get the eroor "Unfortunately com.android.systemui has stopped" a few times. After clicking "okay" I get to enter my PIN for my SIM card, but then it just gets worse. The error pops up constantly and I have no possibility of selecting anything else. The apps on my wallpaper dissappear and appear again, the wallpaper switches to fullscreen, then normal again and so on. Wiping cache or dalvik cache does nothing, only a factory reset helps. Then it installs all the apps again, but when I reboot, the same problem persists.
Some threads suggested it may be an app and since it only happens when I reboot, could it be an app that launches on boot?
Others suggested trying an older version of Cyanogenmod (which is why I'm using M5 at the moment. M6 gave the exact same problem). Or has it something to do with the gapps file I'm using?
Any ideas on how to fix this? Thanks in advance.
Hi there,
Please post your question in the dedicated forum for your device, in that way owners of this phone and experts can help you more:
> Moto G > Moto G Q&A, Help & Troubleshooting
Good luck

[Q] Moto g 1st gen : "Unfortunately system ui has stopped " problem.

I bricked my moto g XT1033 and flashed a custom recovery (Clockworkmod) but when I started the custom recovery a wavy blurriness keeps sweeping the screen. Then I flashed cm12 nightly build and the problem was still there but a new problem started. This message : "Unfortunately, system ui has stopped" keeps popping at half a second interval. The wavy line problem stops after 5-10 mins after boot but the popup problem persists. Maybe the two problems are interrelated. I have tried factory reset, wiping cache, system and all data but to no avail. I have tried flashing cm again too. Please help !!!!
motorolag said:
I bricked my moto g XT1033 and flashed a custom recovery (Clockworkmod) but when I started the custom recovery a wavy blurriness keeps sweeping the screen. Then I flashed cm12 nightly build and the problem was still there but a new problem started. This message : "Unfortunately, system ui has stopped" keeps popping at half a second interval. The wavy line problem stops after 5-10 mins after boot but the popup problem persists. Maybe the two problems are interrelated. I have tried factory reset, wiping cache, system and all data but to no avail. I have tried flashing cm again too. Please help !!!!
Click to expand...
Click to collapse
Did you get a solution to this?
j_arpit003 said:
Did you get a solution to this?
Click to expand...
Click to collapse
Flashed another build of cm12 after a clean wipe and it solved the problem.

Even after wiping data/factory reset, Gapps stills in the system.

Good Morning.
Yesterday I was excited to flash CyanogenMod 12.1 in my other Android device.
The process was the same and I did everything correctly. Unfortunately, after flashing Google Apps, the system wouldn't stop showing pop-ups like "google app has stopped", " google services has stopped".
Nothing about Gapps works, even the keyboard. I have tried to wiping data/factory reset, using CWM and refashing CM12.1 ONLY, but it didn't work. The pop-ups are still there.
Please, I would appreciate any possible help.
Thanks.

Phone process stop working CM13.0 XT1032

I`ve installed CM13.0-20160311 + C-Apps + Gapps nano on my Moto G 1032, and after I've installed everything I need, I tried to make a call but when I pressed the call button the screen comes back to home screen and the "Unfortunately the process com.android.phone has stopped" pop-up message appears. The call actually works, but the phone app does not, so I can't hang up the phone.
I've tried several "solutions", but no one help me with this problem. I've tried wipe/format cache, dalvik, delete the directory "/data/data/com.android.providers.telephony/" and "/data/data/com.android.phone/", upgrade to 20160312 and 20160313, downgrade to 20160310, but nothing works.
Any idea?
Thanks!
LorenzoPdeAP said:
I`ve installed CM13.0-20160311 + C-Apps + Gapps nano on my Moto G 1032, and after I've installed everything I need, I tried to make a call but when I pressed the call button the screen comes back to home screen and the "Unfortunately the process com.android.phone has stopped" pop-up message appears. The call actually works, but the phone app does not, so I can't hang up the phone.
I've tried several "solutions", but no one help me with this problem. I've tried wipe/format cache, dalvik, delete the directory "/data/data/com.android.providers.telephony/" and "/data/data/com.android.phone/", upgrade to 20160312 and 20160313, downgrade to 20160310, but nothing works.
Any idea?
Thanks!
Click to expand...
Click to collapse
C-Apps is for CM 12.1 not 13 the Package over ridden the Dialler with CM 12.1 C-Apps Dialler and that's what went wrong,Reinstall without C-Apps.

Categories

Resources