First off, i know how many ppl come to these forums and just immediately start asking questions without doing some reading and searching first so I did some reading and researching and after 4 hours, i am going to ask for help. i appreciate any help and apologize if this has already been covered.
i am running cm 10.1.3 and tried to update to the november 3 2013 nightly 10.2.x. when i did i got stuck in the boot loop. so i entered my recovery mode and wiped all data and did the dalvick wipe. then i tried to reinstall cm 10.1.3. when i did all of my apps and data were gone, which i expected. i tried to then download google apps and install it in cwm 6.0.2.3. i am unable to install the zip files bc it keeps giving me an e signature verification failure message. i have tried to install the google apps from 20121212, 20130812, and even 20130813. all of them give me the error. i have tried restarting recovery and wiping data and dalvick before all of those. i know that my cwm is not the most recent version, but am unable or too stupid to update it without having access to google apps.
i have also tried turning the toggle signature verification off and on. nothing is working so far. i can boot into cm 10.1.3 and use messaging and my phone so it's not a complete loss at the moment but would really like to get google apps running on my phone again.
i appreciate any help and the time and patience that'll have with me. if i can get this working i vow to never again try and screw with my phone. have a great day
Related
I have a US Verizon launch day Xoom that has been rooted since day one. It has been trouble free until now. I recently attempted to upgrade to 2.1 Hammerhead from MantaRay and I got this error in CWM verTiamat R4c-100611 while I was doing a factory/data reset "Error Removing /data/data/com.google.android.location/file/cache.wifi."
I noticed the error but rebooted the system anyway. When I rebooted I was now on Hammerhead 2.1, but noticed several problems. One being I lost function in the Home softkey. I also noticed all my apps and data were still intact as I left them on MantaRay. I like to start fresh with a factory/data reset whenever changing roms to avoid issues so I went back and attempted another wipe and flash of Hammerhead. I got the same error in CWM verTiamat R4c-100611. I rebooted to the same problems in the ROM.
Thinking it might be a problem with the recovery, I reflashed CWM verTiamat R4c-100611, flashed Team Rouges CWM v1.0, and finally reverted back to CWM verSolarnz 120511-2030, and got the same error every time I would attempt a factory/data reset.
I then attempted to do a factory/data reset from within the privacy menu in the ROM. I got the screen with the android and the triangle/exclamation point overhead when I tried. I also unistalled a few apps and cleared data on the google ones. No matter what I do I can not erase the data.
I did some searching around but could not find any info on this specific error. Im hoping I missing something and it is an easy fix. I'm running out of ideas tho. Any advice would be much appreciated!
Pic is of the error message I get no matter what recovery I use.
polarized said:
I have a US Verizon launch day Xoom that has been rooted since day one. It has been trouble free until now. I recently attempted to upgrade to 2.1 Hammerhead from MantaRay and I got this error in CWM verTiamat R4c-100611 while I was doing a factory/data reset "Error Removing /data/data/com.google.android.location/file/cache.wifi."
I noticed the error but rebooted the system anyway. When I rebooted I was now on Hammerhead 2.1, but noticed several problems. One being I lost function in the Home softkey. I also noticed all my apps and data were still intact as I left them on MantaRay. I like to start fresh with a factory/data reset whenever changing roms to avoid issues so I went back and attempted another wipe and flash of Hammerhead. I got the same error in CWM verTiamat R4c-100611. I rebooted to the same problems in the ROM.
Thinking it might be a problem with the recovery, I reflashed CWM verTiamat R4c-100611, flashed Team Rouges CWM v1.0, and finally reverted back to CWM verSolarnz 120511-2030, and got the same error every time I would attempt a factory/data reset.
I then attempted to do a factory/data reset from within the privacy menu in the ROM. I got the screen with the android and the triangle/exclamation point overhead when I tried. I also unistalled a few apps and cleared data on the google ones. No matter what I do I can not erase the data.
I did some searching around but could not find any info on this specific error. Im hoping I missing something and it is an easy fix. I'm running out of ideas tho. Any advice would be much appreciated!
Pic is of the error message I get no matter what recovery I use.
Click to expand...
Click to collapse
That is strange and troubling, if indeed this problem just came out of nowhere. I know that you can wipe data in fastboot, though I can't remember the exact syntax right now, but it should be available.
On edit: try: fastboot erase userdata. & fastboot erase cache
I think you do need to wipe/factory reset between Manta Ray and Hammerhead as the framework was changed/fixed, among other things.
Thanks Okantomi! Your advice worked perfect.
Hi all
I’m a complete noob at this and it seems like I have got myself into a bit of a pickle. Sorry for the massive description but I thought it would make it easier to get a good answer.
My Phone:
Samsung Galaxy S4 GT 19505 LTE
PDA I9505XXUEMK8
CSC I9505BTUEMK5
MODEM I9505XXUEMK8
I successfully rooted my phone using Odin. In Odin I added the "CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5" file to the PDA field then rebooted the device. Then I added the "openrecovery-twrp-2.6.3.1-jfltexx" file to the PDA field, rebooted the device and the phone automatically opened in TWRP recovery. In recovery mode I wiped the cache, system and dalvik cache. I then went to install, browsed to the "I9505 Official_Google_Edition_4.3_by_Jamal2367_Finaly_v2.0" file on my SD card, rebooted the device and the Google logo came up on the screen for a few minutes and all was good. Got my new ROM, ran a root checker and all was good.
After some research I decided I wanted to use the Pacman ROM as it seemed to a lot more customisable. Using the same method I went to TWRP recovery wiped the cache, system, and dalvik cache. I then went to Install, browsed for the pacman ROM and the Gapps file on my SD card and everything installed ok, the phone restarted and the pacman logo came up everything was fine. Although I did notice on start up that I got this message.(and have had this error message ever since)
kernel is not seandriod enforcing
set warranty bit : kernel
After using the Pacman ROM for a day I noticed a lot of bugs like my apps would disappear, I couldn't use my banking apps and my phone was generally performing very badly. So I decided to remove the ROM and use CyanogenMod ROM under the recommendation of a friend. So again I pressed home+power+vol up to enter recovery mode but this time it didn’t enter the TWRP recovery it entered the stock recovery mode. This was slightly concerning but I proceeded to use the list menu and cleared the cache etc, browsed the SD card and went to the CyanogenMod 10.2 ROM I previously downloaded. It began to install but in red I got the error message stating that I didn’t have the right permission or signature. The phone rebooted back to the Pacman ROM. I tried the above three times and it still continued to boot back into Pacman ROM sometimes I struggled to even get back into recovery mode.
Soooooo I decided to try and go back to the Google Edition 4.3 ROM and play it safe, using the method from my first paragraph. But when it installed through TWRP I got an error message saying cant find MD5 file. The device rebooted and the Google edition logo came up on the screen but it seems to be locked in a loop. The Google logo wont go away and the phone vibrates once then three times quickly every 10 seconds.
I can still enter both TWRP recover and Download Mode. But I don’t want to mess around with it anymore without getting some advice. Any help would be much appreciated as I really need my phone working.
Thanks again
Aiden
Did you create a backup while on your first run with google edition? If so wipe cache, system, and dalvik and restore to your backup. Should put you back to where you began.
Sent from my LGMS769 using XDA Premium 4 mobile app
I know I should, but I didnt. Is it still fixable ?
*Update*
Couldnt help myself had to have a tinker around. Managed to get Cyanogenmod 10 working with Gapps. Gonna see how I get on with this. Although still would like to know I have been having all these problems.
Sometimes things just dont go as planned: p I have easily soft bricked my phone around 10 times and always able to fix it. You really should have made a stock backup before flashing anything. I recommend doing it now so you at least have a known working configuation backed up for future use. Trust me backups are your friends!
Sent from my LGMS769 using XDA Premium 4 mobile app
Thanks for your replies.
Ye gonna that right now Cyan Mod so far is running very smooth without any problems.
Regards
Aiden
First of all, I am sorry for making new thread. But it seems that I've tried searching everywhere for the solution but I couldn't find any.
Here is my problem,
Last few month, I flashed my P3100 to OmniRom. It works perfectly!
But for a past few weeks, I got gapps suddenly stopped working. As I know what to do, I reset my P3100 by wiping all data using Philz recovery.
And then it worked fine again.
Unfortunately, for last three days. It happened again.
So I repeated the same whole thing as I did again.
The problem is, when I tried to reset all data, it won't work. I mean, it looked like I didn't reset anything. Thus, my tablet keeps on showing this message such as gapps has stopped.
I tried to download new ROM. And flashed it via Philz recovery. But it's not working. It remain the same as if nothing happened. I'm still haven't sleep for 3 days looking for a solution. Would somebody here help me? As I really really need to know what is happening with it.
Solutions I've tried but failed:
1- Wipe all data but failed as it looked like nothing happened.
2- Wipe everything everywhere but still remain still
3- Flashing stock rom via Odin but failed.
4- Flashing another version of recovery via Odin but failed
P/S: I've noticed that E:Unknown volume for path [EXT-SD] when I'm doing full wipe.
No one can help me?
Hello to everyone, posting this here as I don't have access to ask in the forum post for BlissPop - I.E fresh user
I'm having issues with my "recalled" shield tablet (wifi), I had it flashed to BlissPop successfully previously but when I tried reflashing it the other day I was met with a major roadbump: It just won't load the ROM.
The tablet freezes at the screen following the installing and optimization of each application - basically my screen is stuck at a small wall of text saying the following:
"BlissPop is starting...
Powered by Team Bliss
Starting apps.
Please wait for the optimization process to finish."
And before you ask, yes I have waited long enough (left it on through the night just to be sure - this thing won't load).
My procedure is as follows.
Bootloader is CWM and it is rooted beforehand.
1st off going into recovery mode.
#2 Wipe data/cache/dalvik cache - done
#3 Installed BlissPop via sideload, then gapps_pico afterwards (I've tried wiping cache+dalvik before installing gapps to no help.)
#4 Rebooting from CWM, here I've tried both allowing and denying CWM to "fix" root settings.
I've tried the first ROM I installed (when wifi/lte versions were available) and the newer releases - same problem with both.
After this I am met with this screen that won't budge, anyone got a possible solution to this issue?
Hey I just received my replacement tablet and was going through this process too. I did some digging around and found / remembered that having an external SD card socketed can cause this problem. So I powered my device off, removed the card and then rebooted without major issue.
Hope this helps.
I don't have any SD card in my tablet though, thanks anyways.
Did you format system?
If not then do format system/data/cache
Sent from my P4S using Tapatalk
Tried doing a format of system as well as data/cache/dalvik, still getting same result :/
Not sure its still helpful or not...i saw the xda thread regarding to this thread and whoever tried to flash the last zip got stuck at boot. So I'm guessing if you will flash a different one (by this time maybe they upload a new one) maybe you could get rid of it..
Sent from my P4S using Tapatalk
When I switched to BlissPop I had to format /data because TWRP was unable to wipe it. TWRP offers that option unter "advanced wipe". Might be the same with CWM.
any help my phone stuck on this boot loop and i dont know what to do now , any fix ? i dont wanna have broken phone i did everything that u guys said nothing works
Cant flash Cyanogen, recovery faulty & weird crashes in stock on refurbished Nexus 5
Hey guys,
so I recently got a "refurbished" replacement for my Nexus 5 and I decided since im starting out fresh (can't access the data on the old one), I'll try out Cyanogen mod.
I can assure you that I followed all the instructions exactly. At some point I checked every download for his checksums and all were ok.
Each time I started the process by flashing a factory image (flash-all.bat), to have a clean start.
I also tried to wipe cache/dalvik cache/data afterwards, but not always. This didn't change the behavior.
These things happened to me while trying to accomplish the task, and working around the issues as they arised:
Flashing TWRP: High (3 of 4) chance that TWRP wouldn't even start up, the phone would hang and just flash the TWRP background picture on screen.
When I did get through to TWRP, applying the Cyanogenmod .zip got stuck at "patching system image unconditionally". Let it go on for hours.
I figured that TWRP was broken and tried Clockworkmod instead. CWM at least always started after flashing it. But same as TWRP, it failed in installing the Cyanogenmod .zip. I tried putting it onto the phone by going into the stock android and then through adb push command, but also through sideloading directly into CWM.
What I noticed when going into the stock ROM was, that a lot of Google processes were failing during the initial setup (where it wants to know ur WiFi, date, Google acc, etc), like Maps, Settings, Play Services, and some others. Sometimes they were failing so hard it was impossible to type in the WiFi passphrase because the notifications of different "xxx has stopped working" were coming to fast, sometimes not a single one was failing. I could not find any pattern to this. When they were failing so hard I couldn't get through the initial setup I would just flash the stock again, until I got only some of them failing, or none at all.
Back to CWM and installing the Cyanogenmod .zip:
It failed with different errors. I got status 0, status 1, I think I once got status 6 or 7, but half of the time it hanged exactly where TWRP was hanging. The errors were random. After getting status X, I would sideload it right again, to get other status Y, sideload again, to get the hang. Could not recognize a pattern.
During this I switched USB ports, and cables, and even tried using my laptop instead of the desktop. One of the cables was faulty, it didn't even allow a connection, but any other setup showed the same behaviour.
Is there anything else I can/should try? Is it my fault, or is the phone bad?
Assuming the phone is bad, I suppose I still could get a stock running without the crashes, so it would _feel_ like the phone is alright (which is what Google probably did before sending it out again as "refurbished"), but I think there would be errors in the future, also I don't want a phone with such an uncertainty. Would they swap it? Also, it is a LG-D820, which means it might have issues with european LTE, haven't gotten to trying that out since I don't use LTE right now, nor will I in the near future.
Best regards,
napster
napstr said:
Hey guys,
so I recently got a "refurbished" replacement for my Nexus 5 and I decided since im starting out fresh (can't access the data on the old one), I'll try out Cyanogen mod.
I can assure you that I followed all the instructions exactly. At some point I checked every download for his checksums and all were ok.
Each time I started the process by flashing a factory image (flash-all.bat), to have a clean start.
I also tried to wipe cache/dalvik cache/data afterwards, but not always. This didn't change the behavior.
These things happened to me while trying to accomplish the task, and working around the issues as they arised:
Flashing TWRP: High (3 of 4) chance that TWRP wouldn't even start up, the phone would hang and just flash the TWRP background picture on screen.
When I did get through to TWRP, applying the Cyanogenmod .zip got stuck at "patching system image unconditionally". Let it go on for hours.
I figured that TWRP was broken and tried Clockworkmod instead. CWM at least always started after flashing it. But same as TWRP, it failed in installing the Cyanogenmod .zip. I tried putting it onto the phone by going into the stock android and then through adb push command, but also through sideloading directly into CWM.
What I noticed when going into the stock ROM was, that a lot of Google processes were failing during the initial setup (where it wants to know ur WiFi, date, Google acc, etc), like Maps, Settings, Play Services, and some others. Sometimes they were failing so hard it was impossible to type in the WiFi passphrase because the notifications of different "xxx has stopped working" were coming to fast, sometimes not a single one was failing. I could not find any pattern to this. When they were failing so hard I couldn't get through the initial setup I would just flash the stock again, until I got only some of them failing, or none at all.
Back to CWM and installing the Cyanogenmod .zip:
It failed with different errors. I got status 0, status 1, I think I once got status 6 or 7, but half of the time it hanged exactly where TWRP was hanging. The errors were random. After getting status X, I would sideload it right again, to get other status Y, sideload again, to get the hang. Could not recognize a pattern.
During this I switched USB ports, and cables, and even tried using my laptop instead of the desktop. One of the cables was faulty, it didn't even allow a connection, but any other setup showed the same behaviour.
Is there anything else I can/should try? Is it my fault, or is the phone bad?
Assuming the phone is bad, I suppose I still could get a stock running without the crashes, so it would _feel_ like the phone is alright (which is what Google probably did before sending it out again as "refurbished"), but I think there would be errors in the future, also I don't want a phone with such an uncertainty. Would they swap it? Also, it is a LG-D820, which means it might have issues with european LTE, haven't gotten to trying that out since I don't use LTE right now, nor will I in the near future.
Best regards,
napster
Click to expand...
Click to collapse
Hi.
According to what you say, it seems an hardware problem of you phone. Don't know if it may help but you can try installing an older factory image (for example kitkat) and seeing if the "force closing" problems are still there. If your phone is ok it should be able to run a factory image at least.
Download the nexus root toolkit, create a nandroid backup, then when either in CWM or TWRP wipe everything off the phone then try to flash a ASOP rom like Cataclysm if nothing else works then I don't know how to help sorry-.-
So I tried to get the stock ROM up and running again, and it seems even that is not possible. Several processes keep crashing during various tasks, even when idling. After having a short chat with Google Support about the issues I got an RMA offered, so things are cool. I locked the phone again, set the tamper-bit to false and wiped everything.