Hello,
i have an issue with my Galaxy S6 (SM-G920F UK VOD) i believe it to be bricked, and not soft bricked. i can't get the phone to boot no matter what i try.
It all started after i had rooted the device, the root was successful and worked a treat until i decided i would like to play about with twrp. now i can't locate E/ and there does not seem to be any contents inside of the system folder.
Any help would be greatly appreciated and sorry if i have left out any important info.
I don't know if this is important but i have a recovery log.
pastebin com /PKE5fzgJ
trying to flash stock firmware using odin v3.10
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Related
Okay so i just got my replacement today, upgraded to JB and now when i try to flash anything with odin it fails at nand write.
Show for odin status
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> 7z¼¯'
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
CovXX said:
Okay so i just got my replacement today, upgraded to JB and now when i try to flash anything with odin it fails at nand write.
Show for odin status
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> 7z¼¯'
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
From what I have seen in ODIN none of this is right. Added should be 1rst line. Whole script line looks bad to me. Can't tell what you are doing. May need to PM me to avoid a brick.
---------- Post added at 02:48 AM ---------- Previous post was at 02:46 AM ----------
Since post was yesterday Mod may want to close this one. He got it or bricked it. :laugh:
nope didn't get it and isnt bricked either. Tryed again
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRBLK3_Bootchain_CWM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Saw the updated instructions just hours after I posted that. Everything is up and running great!
***********************************
Oh funny I ran across this tread. I just bought an s3 off contract, did the OTA update, and now it seems I can't get root or figure out even what I am doing wrong.
I have spent the better part of a day, bouncing between 3 computers and 4 software environments trying to get all the different guides I have found off of here to work. I have used the toolkit which I realizes states that you must have unlocked bootloader. I try to unlock bootloader, which the instructions seem to suggest that you must root first, I can't get any sort of file permissions to write root files. tried 3 different guides, all at the top of the forum lists.
Below is what I get when I try to flash file in odin per root instructions in tool kit:
*********
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
jerrt010 said:
Saw the updated instructions just hours after I posted that. Everything is up and running great!
***********************************
Oh funny I ran across this tread. I just bought an s3 off contract, did the OTA update, and now it seems I can't get root or figure out even what I am doing wrong.
I have spent the better part of a day, bouncing between 3 computers and 4 software environments trying to get all the different guides I have found off of here to work. I have used the toolkit which I realizes states that you must have unlocked bootloader. I try to unlock bootloader, which the instructions seem to suggest that you must root first, I can't get any sort of file permissions to write root files. tried 3 different guides, all at the top of the forum lists.
Below is what I get when I try to flash file in odin per root instructions in tool kit:
*********
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
Updated instructions where? I keep getting the same thing. How did you fix it?
Where did you get the updated instructions? Please Tell
Sent from my SCH-I535 using xda app-developers app
I tried to flash CyanogenMod and i couldn't activate / stuck in roaming. So, i followed the steps outlined here -- in the fixing data section ( http://forum.xda-developers.com/showthread.php?t=2053799 ). I have tried new USB cables,ports,restarts -- But Odin wont flash the system... It got far enough to flash the recovery away so I don't have CWM installed anymore... This is really starting to piss me off... Please help
I have searched everywhere but all i can find is people telling me to change my USB cable... I wish it was that simple.
Thanks,
Elliott
have you tried using another version of odin like 1.8.5
Blackwolf10 said:
have you tried using another version of odin like 1.8.5
Click to expand...
Click to collapse
Yea, ive tried 3.07 and 1.85
This is what i get from Odin
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Read ..
<ID:0/005> XmitData Fail..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
elliott35 said:
Yea, ive tried 3.07 and 1.85
This is what i get from Odin
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Read ..
<ID:0/005> XmitData Fail..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This looks promising http://forum.xda-developers.com/showthread.php?t=1840030
elliott35 said:
This looks promising http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
Mine was fixed when I didn't use VMware Fusion on a mac but a PC directly
hhahah just changed the cable and it worked woowww
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/042> Added!!
<ID:0/042> Odin engine v(ID:3.1207)..
<ID:0/042> File analysis..
<ID:0/042> SetupConnection..
<ID:0/042> Initialzation..
<ID:0/042> Get PIT for mapping..
<ID:0/042> Firmware update start..
<ID:0/042> NAND Write Start!!
<ID:0/042> SingleDownload.
<ID:0/042> sboot.bin
<ID:0/042> FAIL!
<ID:0/042>
<ID:0/042> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I found This Problem Plz Help Me...
I run android kitkat for 4 month.
suddenly tablet has striped screen, recovery not working.
I try to flash a stock rom with Odin and get No PIT partition
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
need help
i tried to root my s6, now only shows the blue update error, how do i unbrick it ?
this is the odin log
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks alot
please dev please help me i have samsung s7 edge SM-G9350/G935F THIS PHONE IS STUCK ON SAMSUNG LOGO AND WHENEVR I FLASHITHIS SOW
FRP IS ENABLE IGNORE PIT DOWNLOAD\
FRP IS ENABLED NOT ALLOW NON DOWNLOAD NON-FRP ABOUT BINARY
AND ODIN SHOWING
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5050 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Download correct firmware for your phone