I tried to flash CyanogenMod and i couldn't activate / stuck in roaming. So, i followed the steps outlined here -- in the fixing data section ( http://forum.xda-developers.com/showthread.php?t=2053799 ). I have tried new USB cables,ports,restarts -- But Odin wont flash the system... It got far enough to flash the recovery away so I don't have CWM installed anymore... This is really starting to piss me off... Please help
I have searched everywhere but all i can find is people telling me to change my USB cable... I wish it was that simple.
Thanks,
Elliott
have you tried using another version of odin like 1.8.5
Blackwolf10 said:
have you tried using another version of odin like 1.8.5
Click to expand...
Click to collapse
Yea, ive tried 3.07 and 1.85
This is what i get from Odin
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Read ..
<ID:0/005> XmitData Fail..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
elliott35 said:
Yea, ive tried 3.07 and 1.85
This is what i get from Odin
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Read ..
<ID:0/005> XmitData Fail..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This looks promising http://forum.xda-developers.com/showthread.php?t=1840030
elliott35 said:
This looks promising http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
Mine was fixed when I didn't use VMware Fusion on a mac but a PC directly
hhahah just changed the cable and it worked woowww
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/042> Added!!
<ID:0/042> Odin engine v(ID:3.1207)..
<ID:0/042> File analysis..
<ID:0/042> SetupConnection..
<ID:0/042> Initialzation..
<ID:0/042> Get PIT for mapping..
<ID:0/042> Firmware update start..
<ID:0/042> NAND Write Start!!
<ID:0/042> SingleDownload.
<ID:0/042> sboot.bin
<ID:0/042> FAIL!
<ID:0/042>
<ID:0/042> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I found This Problem Plz Help Me...
Related
Okay so i just got my replacement today, upgraded to JB and now when i try to flash anything with odin it fails at nand write.
Show for odin status
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> 7z¼¯'
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
CovXX said:
Okay so i just got my replacement today, upgraded to JB and now when i try to flash anything with odin it fails at nand write.
Show for odin status
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> 7z¼¯'
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
From what I have seen in ODIN none of this is right. Added should be 1rst line. Whole script line looks bad to me. Can't tell what you are doing. May need to PM me to avoid a brick.
---------- Post added at 02:48 AM ---------- Previous post was at 02:46 AM ----------
Since post was yesterday Mod may want to close this one. He got it or bricked it. :laugh:
nope didn't get it and isnt bricked either. Tryed again
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRBLK3_Bootchain_CWM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Saw the updated instructions just hours after I posted that. Everything is up and running great!
***********************************
Oh funny I ran across this tread. I just bought an s3 off contract, did the OTA update, and now it seems I can't get root or figure out even what I am doing wrong.
I have spent the better part of a day, bouncing between 3 computers and 4 software environments trying to get all the different guides I have found off of here to work. I have used the toolkit which I realizes states that you must have unlocked bootloader. I try to unlock bootloader, which the instructions seem to suggest that you must root first, I can't get any sort of file permissions to write root files. tried 3 different guides, all at the top of the forum lists.
Below is what I get when I try to flash file in odin per root instructions in tool kit:
*********
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
jerrt010 said:
Saw the updated instructions just hours after I posted that. Everything is up and running great!
***********************************
Oh funny I ran across this tread. I just bought an s3 off contract, did the OTA update, and now it seems I can't get root or figure out even what I am doing wrong.
I have spent the better part of a day, bouncing between 3 computers and 4 software environments trying to get all the different guides I have found off of here to work. I have used the toolkit which I realizes states that you must have unlocked bootloader. I try to unlock bootloader, which the instructions seem to suggest that you must root first, I can't get any sort of file permissions to write root files. tried 3 different guides, all at the top of the forum lists.
Below is what I get when I try to flash file in odin per root instructions in tool kit:
*********
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
Updated instructions where? I keep getting the same thing. How did you fix it?
Where did you get the updated instructions? Please Tell
Sent from my SCH-I535 using xda app-developers app
I can't get root on my sm-p900. I'm sure that at the moment this is not possible. I have no idea what my tablet is different from the others.
I can't install recovery.
When i trying get root my tablet is reboot and goes to Emergency Recover.
recovery
I Downloaded openrecovery-twrp-2.7.0.0-v1awifi.img
And Odin 3.09
Download Mode/ Odin/ PDA/ START
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
And nothing happened. Tablet boot old recovery after start.
Root
Download this CF-Auto-Root-v1awifi-v1awifixx-smp900.tar
And Odin 3.09 or 3.07(the same sh*t)
Download Mode/ Odin/ PDA/ START
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
tablet freezes and I can see the green lines on the screen. After reboot i see "Emergency Firmware Recovery"
More ways I do not know. Over the internet, these methods are described only.
tried all
I deleted everything related to Samsung. Install different drivers. Different versions of Odin.
I do not know what's wrong but I can not achieve anything
See here - http://forum.xda-developers.com/galaxy-note-pro-12/general/sm-p900-note-pro-12-2-wifi-root-t3022542
Hi,
I am having a lot of trouble flashing my Note 3 (SM-N9005) 16gb to Android 5.0. At this point in time, all I can do is enter into DL mode.
I have been trying to use Odin to flash my device, but I think I must have messed up the PIT file by accident - using a 32gb instead of a 16 gb. I now know that I should never have touched the PIT button.
I am using this stock firmware: N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 to get back to old version.
Odin reads:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there someway to fix this?
Thanks in advance!
dmar16 said:
Hi,
I am having a lot of trouble flashing my Note 3 (SM-N9005) 16gb to Android 5.0. At this point in time, all I can do is enter into DL mode.
I have been trying to use Odin to flash my device, but I think I must have messed up the PIT file by accident - using a 32gb instead of a 16 gb. I now know that I should never have touched the PIT button.
I am using this stock firmware: N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 to get back to old version.
Odin reads:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there someway to fix this?
Thanks in advance!
Click to expand...
Click to collapse
Use the right pit file and you should be fine.
LS.xD said:
Use the right pit file and you should be fine.
Click to expand...
Click to collapse
Thanks. I tried that with this PIT file [HLTE_HKTW_OPEN_16G.pit], but get this message now:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
"ODIN : Invalid ext4 image"
Is there a better PIT file I should use?
Try restarting odin, use right pit file and it should flash the stock rom
Don't forget to hit thanks if I helped you...
dmar16 said:
Thanks. I tried that with this PIT file [HLTE_HKTW_OPEN_16G.pit], but get this message now:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
"ODIN : Invalid ext4 image"
Is there a better PIT file I should use?
Click to expand...
Click to collapse
You phone (or at least the stock firmware you want to use is "France - Orange") There has no official Lollipop update been released yet.
The pit file is "Hong Kong -Taiwan" , may be its not compatible to each other. Try to get a pit file that matches your firmware. Or take a firmware that matches the pit file. In any case you should backup your EFS before going on flashing different firmwares. Use TWRP to backup your EFS .
OK thanks. Downloading FW for Hong Kong - Taiwan now. I will let you know if it works.
I need help please Im trying to return to stock os and Kernel but cant find a way evey time I try to flash the stock OS through odin this happens
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920TUVU1BOH6_N920TTMB1BOH6_N920TUVU1BOH6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Re download your firmware
Brava27 said:
Re download your firmware
Click to expand...
Click to collapse
Already did it from 2 different sources still having the same problem I have the stock rom but with a different kernel, I want to return to stock as if it was a new phone
if i had to guess, that is the wrong .tar for your phone - were you on N920TUVU1BOH6 to begin with??
you cannot go backwards - if it's a tmobile phone, you should be going to coi5
I'm getting the same thing or this...
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
OR
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 0)
Then it just stops.
Trying to unroot because the phone turns off randomly since I rooted.
The phone turns of because the roms come without kernels. You must download and flash a kernel after flashing your rom of choice.
Download the latest coi5 firmware, double check md5 values, and flash. There shouldn't be any troubles.
farfromovin said:
Download the latest coi5 firmware, double check md5 values, and flash. There shouldn't be any troubles.
Click to expand...
Click to collapse
This.
Hello, i am having a problem flashing the stock rom on GT-i9105P, i tried alot of roms but still none of them works.
I tried 4 Files repair firmware 4.1.2 and this is the log:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> BcmBoot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> HEDGE_RF_LE_SS_CAPRI_00.bin
<ID:0/005> sysparm_dep.img
<ID:0/005> sysparm2_dep_blob.img
<ID:0/005> sboot.bin
<ID:0/005> param.lfs
<ID:0/005> dt-blob
<ID:0/005> vc-firmware.img
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
---------------------------------------------------------------
4.1.2 Stock rom 1 file, flash log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXAMC2_I9105POXXAMB5_I9105PXXAMC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> vc-firmware.img
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> BcmCP.img
<ID:0/005> dt-blob
<ID:0/005> cache.img
<ID:0/005> system.img
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
-------------------------------------------------------
4.2.2 Stock rom 1 file, flash log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9105PXXUBNB1_I9105POXABNA1_I9105PXXUBNB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I also trie alot of Odin versions, but none works :/
Help me please, i've been trying to flash it from 2 days ago
Have you tried flashing RedRom, made by me?
It's stock 4.2.2 + extra optimizations.
Johnny TDN said:
Have you tried flashing RedRom, made by me?
It's stock 4.2.2 + extra optimizations.
Click to expand...
Click to collapse
First, thanks for replying.
No, i didn't try it..i would like to ask if you can give me it!
Goat678 said:
First, thanks for replying.
No, i didn't try it..i would like to ask if you can give me it!
Click to expand...
Click to collapse
Check my threads on my.profile. You will find RedRom there.
Johnny TDN said:
Check my threads on my.profile. You will find RedRom there.
Click to expand...
Click to collapse
Well, thx i already found it..
But still having a problem in odin while flashing TWRP/CWM recoveries...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP-2.6.30_4.2.2_ODIN-s2vep.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
Can you help me please?
Goat678 said:
Well, thx i already found it..
But still having a problem in odin while flashing TWRP/CWM recoveries...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> TWRP-2.6.30_4.2.2_ODIN-s2vep.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
Can you help me please?
Click to expand...
Click to collapse
If you have root on your phone, use Flashify.
...
Johnny TDN said:
If you have root on your phone, use Flashify.
Click to expand...
Click to collapse
Well, the phone is not turning on.
While turning on shows this message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
and i cannot boot to recovery mode on my device and cannot flash any thing :/
Goat678 said:
Well, the phone is not turning on.
While turning on shows this message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
and i cannot boot to recovery mode on my device and cannot flash any thing :/
Click to expand...
Click to collapse
Try this one
https://m.youtube.com/watch?v=7zEhC4kvMUE
Goat678 said:
Well, the phone is not turning on.
While turning on shows this message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
and i cannot boot to recovery mode on my device and cannot flash any thing :/
Click to expand...
Click to collapse
You fixed your problem?
Johnny TDN said:
You fixed your problem?
Click to expand...
Click to collapse
Unfortunately, no.
I still can't fix it
Goat678 said:
Unfortunately, no.
I still can't fix it
Click to expand...
Click to collapse
Then i'm afraid that you must buy a new motherboard. Sorry.
Johnny TDN said:
Then i'm afraid that you must buy a new motherboard. Sorry.
Click to expand...
Click to collapse
Well, i kept trying till i just flashed TWRP recovery, then installed your RedRom
and its very good!
Thanks ♥