Odin fails at nand write - Verizon Samsung Galaxy S III

Okay so i just got my replacement today, upgraded to JB and now when i try to flash anything with odin it fails at nand write.
Show for odin status
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> 7z¼¯'
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

CovXX said:
Okay so i just got my replacement today, upgraded to JB and now when i try to flash anything with odin it fails at nand write.
Show for odin status
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> 7z¼¯'
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
From what I have seen in ODIN none of this is right. Added should be 1rst line. Whole script line looks bad to me. Can't tell what you are doing. May need to PM me to avoid a brick.
---------- Post added at 02:48 AM ---------- Previous post was at 02:46 AM ----------
Since post was yesterday Mod may want to close this one. He got it or bricked it. :laugh:

nope didn't get it and isnt bricked either. Tryed again
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> VRBLK3_Bootchain_CWM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

Saw the updated instructions just hours after I posted that. Everything is up and running great!
***********************************
Oh funny I ran across this tread. I just bought an s3 off contract, did the OTA update, and now it seems I can't get root or figure out even what I am doing wrong.
I have spent the better part of a day, bouncing between 3 computers and 4 software environments trying to get all the different guides I have found off of here to work. I have used the toolkit which I realizes states that you must have unlocked bootloader. I try to unlock bootloader, which the instructions seem to suggest that you must root first, I can't get any sort of file permissions to write root files. tried 3 different guides, all at the top of the forum lists.
Below is what I get when I try to flash file in odin per root instructions in tool kit:
*********
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

jerrt010 said:
Saw the updated instructions just hours after I posted that. Everything is up and running great!
***********************************
Oh funny I ran across this tread. I just bought an s3 off contract, did the OTA update, and now it seems I can't get root or figure out even what I am doing wrong.
I have spent the better part of a day, bouncing between 3 computers and 4 software environments trying to get all the different guides I have found off of here to work. I have used the toolkit which I realizes states that you must have unlocked bootloader. I try to unlock bootloader, which the instructions seem to suggest that you must root first, I can't get any sort of file permissions to write root files. tried 3 different guides, all at the top of the forum lists.
Below is what I get when I try to flash file in odin per root instructions in tool kit:
*********
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
Updated instructions where? I keep getting the same thing. How did you fix it?

Where did you get the updated instructions? Please Tell
Sent from my SCH-I535 using xda app-developers app

Related

Cant get odin to work stuck on system.img Galaxy S3

I tried to flash CyanogenMod and i couldn't activate / stuck in roaming. So, i followed the steps outlined here -- in the fixing data section ( http://forum.xda-developers.com/showthread.php?t=2053799 ). I have tried new USB cables,ports,restarts -- But Odin wont flash the system... It got far enough to flash the recovery away so I don't have CWM installed anymore... This is really starting to piss me off... Please help
I have searched everywhere but all i can find is people telling me to change my USB cable... I wish it was that simple.
Thanks,
Elliott
have you tried using another version of odin like 1.8.5
Blackwolf10 said:
have you tried using another version of odin like 1.8.5
Click to expand...
Click to collapse
Yea, ive tried 3.07 and 1.85
This is what i get from Odin
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Read ..
<ID:0/005> XmitData Fail..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
elliott35 said:
Yea, ive tried 3.07 and 1.85
This is what i get from Odin
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Read ..
<ID:0/005> XmitData Fail..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
This looks promising http://forum.xda-developers.com/showthread.php?t=1840030
elliott35 said:
This looks promising http://forum.xda-developers.com/showthread.php?t=1840030
Click to expand...
Click to collapse
Mine was fixed when I didn't use VMware Fusion on a mac but a PC directly
hhahah just changed the cable and it worked woowww
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/042> Added!!
<ID:0/042> Odin engine v(ID:3.1207)..
<ID:0/042> File analysis..
<ID:0/042> SetupConnection..
<ID:0/042> Initialzation..
<ID:0/042> Get PIT for mapping..
<ID:0/042> Firmware update start..
<ID:0/042> NAND Write Start!!
<ID:0/042> SingleDownload.
<ID:0/042> sboot.bin
<ID:0/042> FAIL!
<ID:0/042>
<ID:0/042> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I found This Problem Plz Help Me...

Is there a way to get root without Odin? sm-p900

I can't get root on my sm-p900. I'm sure that at the moment this is not possible. I have no idea what my tablet is different from the others.
I can't install recovery.
When i trying get root my tablet is reboot and goes to Emergency Recover.
recovery
I Downloaded openrecovery-twrp-2.7.0.0-v1awifi.img
And Odin 3.09
Download Mode/ Odin/ PDA/ START
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
And nothing happened. Tablet boot old recovery after start.
Root
Download this CF-Auto-Root-v1awifi-v1awifixx-smp900.tar
And Odin 3.09 or 3.07(the same sh*t)
Download Mode/ Odin/ PDA/ START
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
tablet freezes and I can see the green lines on the screen. After reboot i see "Emergency Firmware Recovery"
More ways I do not know. Over the internet, these methods are described only.
tried all
I deleted everything related to Samsung. Install different drivers. Different versions of Odin.
I do not know what's wrong but I can not achieve anything
See here - http://forum.xda-developers.com/galaxy-note-pro-12/general/sm-p900-note-pro-12-2-wifi-root-t3022542

[Help] Returning To Stock OS

I need help please Im trying to return to stock os and Kernel but cant find a way evey time I try to flash the stock OS through odin this happens
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N920TUVU1BOH6_N920TTMB1BOH6_N920TUVU1BOH6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Re download your firmware
Brava27 said:
Re download your firmware
Click to expand...
Click to collapse
Already did it from 2 different sources still having the same problem I have the stock rom but with a different kernel, I want to return to stock as if it was a new phone
if i had to guess, that is the wrong .tar for your phone - were you on N920TUVU1BOH6 to begin with??
you cannot go backwards - if it's a tmobile phone, you should be going to coi5
I'm getting the same thing or this...
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
OR
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 0)
Then it just stops.
Trying to unroot because the phone turns off randomly since I rooted.
The phone turns of because the roms come without kernels. You must download and flash a kernel after flashing your rom of choice.
Download the latest coi5 firmware, double check md5 values, and flash. There shouldn't be any troubles.
farfromovin said:
Download the latest coi5 firmware, double check md5 values, and flash. There shouldn't be any troubles.
Click to expand...
Click to collapse
This.

Galaxy S6 (SM-G920F) BRICKED. Please help.

Hello,
i have an issue with my Galaxy S6 (SM-G920F UK VOD) i believe it to be bricked, and not soft bricked. i can't get the phone to boot no matter what i try.
It all started after i had rooted the device, the root was successful and worked a treat until i decided i would like to play about with twrp. now i can't locate E/ and there does not seem to be any contents inside of the system folder.
Any help would be greatly appreciated and sorry if i have left out any important info.
I don't know if this is important but i have a recovery log.
pastebin com /PKE5fzgJ
trying to flash stock firmware using odin v3.10
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I NEED HELP!!! 955U ODIN Failed, then recovery failed and FRP LOCK

So the other day I was going to try rooting my s8+ with Snapdragon processor and US model. I downloaded Prince comsy ODIN 3.12 and then was going to flash the SAM PWND software for my model. Odin failed and then at the point, my phone would not load past the Verizon logo on bootup. So after multiple tries I decided well mabye a factory reset will work. I was wrong, so now the reset erased data then started updating software and the android guy dies and says no commands. I can get to recovery mode and I have tried safe mode, normal reboot and even if i turn device off it turns right back on and will continue in a boot loop. I was using a USB 3.0 Port when I first tried the Odin flash, but then i read that is bad so ive only used my usb 2.0 ports after that.
** After odin fails my phone Sometimes says " SW REV CHECK FAIL : [ABL] FUSED 4 >BINARY 3
It always says FRP lock: ON will this be my cause?
So now I downloaded
AP_G955USQS3CRE2_CL13001792_QB18008668_REV01_user_low_ship_MULTI_CERT_meta.tar
BL_G955USQS3CRE2_CL13001792_QB18008668_REV01_user_low_ship_MULTI_CERT.tar
CP_G955USQS3CRE2_CP9619736_CL13001792_QB18008668_REV01_user_low_ship_MULTI_CERT.tar
CSC_OYN_G955UOYN3CRE2_CL13001792_QB18008668_REV01_user_low_ship_MULTI_CERT.tar
HOME_CSC_OYN_G955UOYN3CRE2_CL13001792_QB18008668_REV01_user_low_ship_MULTI_CERT.tar
USERDATA_USC_G955USQS3CRE2_CL13001792_QB18008668_REV01_user_low_ship_MULTI_CERT.tar
I have tried only flashing the BL and the CSC but still a no go. It keeps failing. I also placed the AP with AP, BL with BL, CP with CP, and the HOME CSC with CSC, and the log fails as shown below... I have spaced the log where the fails are located..
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4636 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> abl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4636 M
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4636 M
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Removed!!
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4636 M
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4636 M
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> persist.img.ext4
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4636 M
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> persist.img.ext4
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4636 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> abl.elf
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> persist.img.ext4
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4636 M
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Odin engine v(ID:3.1301)..
<ID:0/004> File analysis..
<ID:0/004> Removed!!
<ID:0/004> Removed!!
<ID:0/004> skip file list for home binary
<ID:0/004> apdp.mbn
<ID:0/004> msadp.mbn
<ID:0/004> persist.img.ext4
<ID:0/004> Home Binary Download
<ID:0/004> Total Binary size: 4636 M
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port. WHAT!!!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> apdp.mbn
<ID:0/005> msadp.mbn
<ID:0/005> persist.img.ext4
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 4636 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> apdp.mbn
<ID:0/005> msadp.mbn
<ID:0/005> persist.img.ext4
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 4636 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4636 M
<ID:0/003> SetupConnection..
I have tried multiple usb ports and cables. I have read many forums of ODIN fails, some reset phones without odin and it works, others try over and over then normally get it on try 3 or 4, some reset odin, I even have a normal un modded version of odin 3.13 and thats what im currently using and that is what the log above is from. I was on Oreo 8.0 before messing up the phone. I have spent alot of time messing with this phone but cant figure it out. Im on a laptop with windows 7 premium 64bit.
ANY and all help is greatly appreciated :/ THANK YOU FOR YOUR TIME!!!
Also please note during the time I use odin, I never see a status on the top in the squares, untill it fails then I see a red FAIL. I noticed in other threads I looked at it showed status like Boot, recovery, etc... even a green PASS when it works. I see NOTHING untill it fails and I see the red fail.
bad signal
Hello can anyone help me please with a quick response my data connection (here in Algeria) is always on H+ and never 4G. I've been around other phones that will get 4G everywhere but I won't and the signal bars are to bad and many people's caled me and i dont reserve there calls please any solution !!?
Phone has been flash to the last frameware from sammobile by odin and reset to factory and still doing this. Any ideas?
Hasanberkdar said:
Hello can anyone help me please with a quick response my data connection (here in Algeria) is always on H+ and never 4G. I've been around other phones that will get 4G everywhere but I won't and the signal bars are to bad and many people's caled me and i dont reserve there calls please any solution !!?
Phone has been flash to the last frameware from sammobile by odin and reset to factory and still doing this. Any ideas?
Click to expand...
Click to collapse
This is considered thread hijacking and is considered rude.Please post in your own Q&A thread
Did you get anything fixed?? If I was in this situation I'd use this modified Odin and the most recent update for the phone. It's Verizon right?? The link is a Verizon firmware with Oreo 8.0.
https://updato.com/firmware-archive-select-model?record=3F235DC8792011E89F15FA163EE8F90B
https://forum.xda-developers.com/attachment.php?attachmentid=4446947&d=1521037501
---------- Post added at 09:49 AM ---------- Previous post was at 09:46 AM ----------
overclocked636 said:
Also please note during the time I use odin, I never see a status on the top in the squares, untill it fails then I see a red FAIL. I noticed in other threads I looked at it showed status like Boot, recovery, etc... even a green PASS when it works. I see NOTHING untill it fails and I see the red fail.
Click to expand...
Click to collapse
Something similar happened to me first. I used the Odin provided from the link. Sometimes I'd have to re-extract the file for it to work.
Thanks I'll try it
eddyo1993 said:
Did you get anything fixed?? If I was in this situation I'd use this modified Odin and the most recent update for the phone. It's Verizon right?? The link is a Verizon firmware with Oreo 8.0.
https://updato.com/firmware-archive-select-model?record=3F235DC8792011E89F15FA163EE8F90B
https://forum.xda-developers.com/attachment.php?attachmentid=4446947&d=1521037501
---------- Post added at 09:49 AM ---------- Previous post was at 09:46 AM ----------
Something similar happened to me first. I used the Odin provided from the link. Sometimes I'd have to re-extract the file for it to work.
Click to expand...
Click to collapse
I'll try that when I get home I appreciate the help!!
That updato link does not work. I found same one on Sam mobile but it's being a pain to download, It wants me to log in so I log in then I clicked the link then at wants me to log in again or pay
overclocked636 said:
That updato link does not work. I found same one on Sam mobile but it's being a pain to download, It wants me to log in so I log in then I clicked the link then at wants me to log in again or pay
Click to expand...
Click to collapse
The link seem to work for me. Go to updato.com then type in your model number
overclocked636 said:
That updato link does not work. I found same one on Sam mobile but it's being a pain to download, It wants me to log in so I log in then I clicked the link then at wants me to log in again or pay
Click to expand...
Click to collapse
This is the firmware with CRE9 update.
https://ibb.co/eB5P8U
See photo attached , this happens when I click the download button. :/
I do appreciate your time and helping me , can't wait to fix this darn phone
I got it downloading from Sam mobile
overclocked636 said:
I got it downloading from Sam mobile
Click to expand...
Click to collapse
Never seen that happen before. Try using the Odin I sent you that's what I used before on my phone and it worked. Did you manually looked up the firmware on updato? Also if sammobile is sill an issue I could upload the firmware on Google Drive and send you the link.
---------- Post added at 05:01 PM ---------- Previous post was at 04:58 PM ----------
overclocked636 said:
I got it downloading from Sam mobile
Click to expand...
Click to collapse
Also please press the reply button so I get notified.
eddyo1993 said:
Did you get anything fixed?? If I was in this situation I'd use this modified Odin and the most recent update for the phone. It's Verizon right?? The link is a Verizon firmware with Oreo 8.0.
https://updato.com/firmware-archive-select-model?record=3F235DC8792011E89F15FA163EE8F90B
https://forum.xda-developers.com/attachment.php?attachmentid=4446947&d=1521037501
---------- Post added at 09:49 AM ---------- Previous post was at 09:46 AM ----------
Something similar happened to me first. I used the Odin provided from the link. Sometimes I'd have to re-extract the file for it to work.
Click to expand...
Click to collapse
eddyo1993 said:
Never seen that happen before. Try using the Odin I sent you that's what I used before on my phone and it worked. Did you manually looked up the firmware on updato? Also if sammobile is sill an issue I could upload the firmware on Google Drive and send you the link.
---------- Post added at 05:01 PM ---------- Previous post was at 04:58 PM ----------
Also please press the reply button so I get notified.
Click to expand...
Click to collapse
I did look up on updato and I got a error still, I downloaded the Odin you provided so I will be trying that either tonight if I get home early from class or tomorrow after work, I got the firmware downloaded late last night so should be good to go now I hope!! Sam mobile is no longer a issue it successfully downloaded ... I don't know why I was having issue before. Thanks so much. I'll let you know how it goes. Do I need combination firmware to unlock my FRP?
overclocked636 said:
I did look up on updato and I got a error still, I downloaded the Odin you provided so I will be trying that either tonight if I get home early from class or tomorrow after work, I got the firmware downloaded late last night so should be good to go now I hope!! Sam mobile is no longer a issue it successfully downloaded ... I don't know why I was having issue before. Thanks so much. I'll let you know how it goes. Do I need combination firmware to unlock my FRP?
Click to expand...
Click to collapse
I'm not sure on the FRP. Is that when Google ask you to sign in before you can use the phone? Keep me updated if it worked.
eddyo1993 said:
I'm not sure on the FRP. Is that when Google ask you to sign in before you can use the phone? Keep me updated if it worked.
Click to expand...
Click to collapse
Eddy, it worked!!!!! Thank you for your time it is much appreciated. I guess I was trying to flash the 3 bootloader is was blocking it out , maybe i already had bootloader 4 on it so had to go back to 4. Thank you again!!!
overclocked636 said:
Eddy, it worked!!!!! Thank you for your time it is much appreciated. I guess I was trying to flash the 3 bootloader is was blocking it out , maybe i already had bootloader 4 on it so had to go back to 4. Thank you again!!!
Click to expand...
Click to collapse
Yes, you can only SAM PAWND and other similar ROMs ONLY if your bootloader is V3 or earlier.
Samsung has patched V4 and V5 already, so until another work around is found, we are stuck with no root..
You can try the safestrap (Bootstrap) thing if you are feeling brave...
https://forum.xda-developers.com/ga...recovery-locked-nougat-7-0-safestrap-t3772761
overclocked636 said:
Eddy, it worked!!!!! Thank you for your time it is much appreciated. I guess I was trying to flash the 3 bootloader is was blocking it out , maybe i already had bootloader 4 on it so had to go back to 4. Thank you again!!!
Click to expand...
Click to collapse
Hey!!! No problem I'm glad it worked!!! Just help others out if they need it as well. You had 200+ people see your post but none helped out. Anything comes up please feel free to PM me.
did you try to flash the firmware with proper binary?

Categories

Resources