Database Info

[Q] Hard Reset

Guys,
I've tried various searches but I can't come up with an answer that works for me.
When attempting a factory/hardware reset one has two choices:
1. Use the software option.
2. Hardware option using button presses.
I'm looking for a procedure to execute option 2. I can get into the bootloader (Vol Up + Power).
Once in the bootloader, I can navigate to the "Recovery" option but once selected my NS doesn't appear to do anything, it just sits there with an "!" inside a triangle and the little android-droid on the screen.
I doesn't move from there no matter how long I leave it and there are no prompts/confirmations.
Once in that state, if I remove the battery and the reboot the phone boots up as if nothing happened...everything is still there, all my accounts still work etc. Basically the actions had no effect.
Does anyone know how to factory reset the device properly? My device non-root btw.
TIA,
Syphon.

I think, for the stock recovery, once you get the ! in the triangle you need to press or hold volume-up and power button again, then it will take you to recovery.

Ah cool.
Thanks for the tip, I will remember that for the next time I need to do it!!

ikon8 said:
I think, for the stock recovery, once you get the ! in the triangle you need to press or hold volume-up and power button again, then it will take you to recovery.
Click to expand...
Click to collapse
On my phone, after 2.3.1, it's power button first, then while holding it, volume up, and only while the box dumping an arrow onto the little android is showing (maybe a second or so). Once the "!" in a triangle is showing, no key combo will get my phone into recovery. Timing is critical. Took me a few tries and a few helpful posts here to get it right.

Oh, also, you can do the ULTIMATE factory reset on this device by doing a "fastboot oem unlock" on the device (then relock it with "fastboot oem lock"). This wipes the sd card as well as the personal data in the rom space.

Awesome, thanks for all the information guys. Much appreciated.

bricked or how to fix?

hi all. thisis my first thread on this forum
i have sensation 4g (t-mobile). today I wiped cache and devlik. then shut down mobile. after pressed power button screen was black and lighting. after this when i plug it usb or press power button screen is black and lighting. i can't enter in recovery too only screen is black and lighting when press power button.
any help? :crying:

tabo89 said:
hi all. thisis my first thread on this forum
i have sensation 4g (t-mobile). today I swiped cache and dylmok. then shut down mobile. after pressed power button screen was black and lighting. after this when i plug it usb or press power button screen is black and lighting. i can't enter in recovery too only screen is black and lighting when press power button.
any help? :crying:
Click to expand...
Click to collapse
do you have access in bootloader?
also are you S-ON?
if you are S-ON see here
http://forum.xda-developers.com/showthread.php?t=1631861

rzr86 said:
do you have access in bootloader?
also are you S-ON?
if you are S-ON see here
http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
1) no. i cant get into bootloader. when i press volume down+power button only screen lights.
2) don't know. i have reinstal roms several time earlier. last time i used ARHD 6.8.0.
this heppaned after wipe cache and devlik and restarting mobile.

tabo89 said:
1) no. i cant get into bootloader. when i press volume down+power button only screen lights.
2) don't know. i have reinstal roms several time earlier. last time i used ARHD 6.8.0.
this heppaned after wipe cache and devlik and restarting mobile.
Click to expand...
Click to collapse
remove battery,reinsert it and and hold the buttons again
edit:if it fails again then connect your device to pc via usb(while in screen lights)
open a command window and do
adb reboot bootloader

rzr86 said:
remove battery,reinsert it and and hold the buttons again
edit:if it fails again then connect your device to pc via usb(while in screen lights)
open a command window and do
adb reboot bootloader
Click to expand...
Click to collapse
1) fails
2) error: device not found

tabo89 said:
1) fails
2) error: device not found
Click to expand...
Click to collapse
i forgot to mention you something
go where your adb and fastboot files are located
and open there the command window.do the command again
if it fails then i am out of ideas
if i think something else i will tell you
until then wait for someone else to tell you what to do

i think problem in device. my pc can not find device. it is connected via usb and screen is lighting but windows can not find device.

Rooted Droid Maxx won't boot into recovery...

Hey all,
I have a rooted Droid Maxx. When I press Power and Down Volumn I can get into the AP Fastboot Menu. When I choose any of the options Using Vol down to move me through the options including normal Powerup, Recovery, Factory, Barcode, BP Tools it will only do a normal boot. I'm using vol down to choose an option and Vol up to activate the option. I have been able to get into these various options before, but something has gone south on me....any ideas...and what other info do you need?
Also, on the fastboot screen it states:
Device is locked. Status code: 0
EDIT: Strangely enough, when I move to Barcodes and hit the up Vol button, I can get into barcodes...but on any other options, when I press Vol up, it just does a normal phone boot.
the phone has been acting a little twitchy lately...camera won't function and keeps telling me to restart, now e-mail is starting to do funny stuff....Not happy. One of the posts that I read on trying to get the camera working correctly stated that wiping the Dalvic cache might help and I think I need to get into recovery tools to do that.
Thx

Any help anyone? I need to get into the tools to wipe the phone....
Thx
Slarti77 said:
Hey all,
I have a rooted Droid Maxx. When I press Power and Down Volumn I can get into the AP Fastboot Menu. When I choose any of the options Using Vol down to move me through the options including normal Powerup, Recovery, Factory, Barcode, BP Tools it will only do a normal boot. I'm using vol down to choose an option and Vol up to activate the option. I have been able to get into these various options before, but something has gone south on me....any ideas...and what other info do you need?
Also, on the fastboot screen it states:
Device is locked. Status code: 0
EDIT: Strangely enough, when I move to Barcodes and hit the up Vol button, I can get into barcodes...but on any other options, when I press Vol up, it just does a normal phone boot.
the phone has been acting a little twitchy lately...camera won't function and keeps telling me to restart, now e-mail is starting to do funny stuff....Not happy. One of the posts that I read on trying to get the camera working correctly stated that wiping the Dalvic cache might help and I think I need to get into recovery tools to do that.
Thx
Click to expand...
Click to collapse

Slarti77 said:
Any help anyone? I need to get into the tools to wipe the phone....
Thx
Click to expand...
Click to collapse
It's not just you apparently. I just tried mine to try to use as a home security camera (after loaning it to a friend to use as a temp phone) and it's doing the same thing yours is, can't factory rest and start over so I guess now I'll have to try to unroot and/or reflash bootloader and get it back to "stock" and try formatting after that.

How do I fix my OnePlus One’s bootloop?

Greetings of the day,
Hello everyone, I'm having a oneplus one 64GB phone that is not getting start, everytime i connect it with the charger it goes into a bootloop. Yes the phone was rooted and I was using a custom ROM with the default kernel. The issue started when I tried to reset the phone to battery settings. I think I somehow messed the kernel and now it is stuck in bootloop. The problem is that I can't connect it to my computer or put it in debug mode as it just restarts again. Any idea how to actually boot it so I can install the kernel and ROM again?

Lazy Titan said:
Greetings of the day,
Hello everyone, I'm having a oneplus one 64GB phone that is not getting start, everytime i connect it with the charger it goes into a bootloop. Yes the phone was rooted and I was using a custom ROM with the default kernel. The issue started when I tried to reset the phone to battery settings. I think I somehow messed the kernel and now it is stuck in bootloop. The problem is that I can't connect it to my computer or put it in debug mode as it just restarts again. Any idea how to actually boot it so I can install the kernel and ROM again?
Click to expand...
Click to collapse
Can it go into recovery mode(power+ vol-)?

Mr.Ak said:
Can it go into recovery mode(power+ vol-)?
Click to expand...
Click to collapse
No, My phone is not getting on but whenever i am connecting it with my charger the phones goes in the Bootloop, and when i am connecting it to My PC while pressing Volume Up + Power Button Pc shows that the Unrecognized devices has been connected.
And i think phone is Hard Bricked. I have tried ADB software and one plus 1 drivers manually but it didn't worked too. I have tried minimal ADB too but it also didn't work.
Kindly let me know about it.

Lazy Titan said:
No, My phone is not getting on but whenever i am connecting it with my charger the phones goes in the Bootloop, and when i am connecting it to My PC while pressing Volume Up + Power Button Pc shows that the Unrecognized devices has been connected.
And i think phone is Hard Bricked. I have tried ADB software and one plus 1 drivers manually but it didn't worked too. I have tried minimal ADB too but it also didn't work.
Kindly let me know about it.
Click to expand...
Click to collapse
Volume UP + Power should boot in fastboot mode. Volume Down + Power should boot into recovery. First, try to boot recovery.

giaur said:
Volume UP + Power should boot in fastboot mode. Volume Down + Power should boot into recovery. First, try to boot recovery.
Click to expand...
Click to collapse
I have tried both, but nothing happens with it, Volume UP + Power shows the unrecognizable device is connected and Volume Down + Power does nothing it continues with bootloop .

Have you got Developer Options enabled?
Goto About Phone & Tap Build Number until Developer Options is activated. Goto Developer Options> Advanced Restart & enable the switch.
Press power button->Restart->Recovery.
It will now boot into Recovery.
Also have you tried keeping hold of power button whilst it bootloops. Keep holding the power button until it powers off. Then press Volume Down & Power Button to power back up (you might see a slight flicker onscreen that means it should go into Recovery mode). Keep hold of these buttons until you gain Access to Recovery Mode.
This will allow you to Recover or flash a different ROM.
If you're having issues connecting to a computer (Windows) try downloading Windows Media Center for your version of Windows. This will install media drivers to recognize your phone.. If all went well you will get the pop up with A0001 (Codename of OnePlus One). From there you should be able to enter fastboot mode through ADB.
If this doesn't help you, I'm sure that someone else will untangle the puzzle to get your device in good working order buddy. Good Luck.

bmark240 said:
Have you got Developer Options enabled?
Goto About Phone & Tap Build Number until Developer Options is activated. Goto Developer Options> Advanced Restart & enable the switch.
Press power button->Restart->Recovery.
It will now boot into Recovery.
Also have you tried keeping hold of power button whilst it bootloops. Keep holding the power button until it powers off. Then press Volume Down & Power Button to power back up (you might see a slight flicker onscreen that means it should go into Recovery mode). Keep hold of these buttons until you gain Access to Recovery Mode.
This will allow you to Recover or flash a different ROM.
If you're having issues connecting to a computer (Windows) try downloading Windows Media Center for your version of Windows. This will install media drivers to recognize your phone.. If all went well you will get the pop up with A0001 (Codename of OnePlus One). From there you should be able to enter fastboot mode through ADB.
If this doesn't help you, I'm sure that someone else will untangle the puzzle to get your device in good working order buddy. Good Luck.
Click to expand...
Click to collapse
he said his device is in bootloop. how come he will turn on the developer option then?

akhiarr said:
he said his device is in bootloop. how come he will turn on the developer option then?
Click to expand...
Click to collapse
This has got to be some sort of World Record for resurrecting an old post from over five years ago. Congratulations on that achievement!
Did you just join to post that?
Lol.

How to enter recovery mode on 9860?

Tried to press power+volume up, doesn't work. Is there any other way?

tainka said:
Tried to press power+volume up, doesn't work. Is there any other way?
Click to expand...
Click to collapse
connect to computer while doing and it works

You can boot into recovery without having to plug into a computer by holding power + volume up, and then once you get to the "this device is unlocked, press power key to continue" screen, rather than just waiting for that screen to disappear, press the power key and then you should be taken to recovery... at least, that's how I was able to do it

ShotSkydiver said:
You can boot into recovery without having to plug into a computer by holding power + volume up, and then once you get to the "this device is unlocked, press power key to continue" screen, rather than just waiting for that screen to disappear, press the power key and then you should be taken to recovery... at least, that's how I was able to do it
Click to expand...
Click to collapse
Its an issue after latest update, so we have to connect to PC and then Power + Vol Up

inningsdefeat500 said:
Its an issue after latest update, so we have to connect to PC and then Power + Vol Up
Click to expand...
Click to collapse
Ah gotcha, that makes sense, I've never been able to get recovery booting via power + volume up, until I randomly tried pressing the power button at the device unlocked screen, and for some reason doing that took me into recovery

ShotSkydiver said:
Ah gotcha, that makes sense, I've never been able to get recovery booting via power + volume up, until I randomly tried pressing the power button at the device unlocked screen, and for some reason doing that took me into recovery
Click to expand...
Click to collapse
What is the unlocked screen? Never saw this

Are you powering off your phone first? If so wait a few seconds after then hold down both power + volume up buttons at the same time and hold for 10 seconds. It still works for me doing it this way.

xfaega said:
Are you powering off your phone first? If so wait a few seconds after then hold down both power + volume up buttons at the same time and hold for 10 seconds. It still works for me doing it this way.
Click to expand...
Click to collapse
Yes, I tried a few times when phone is off. But it butting up like always to the os.

Volume Up + Power, Splash Screen, Continue pressing the volume up button works for me..

tainka said:
Yes, I tried a few times when phone is off. But it butting up like always to the os.
Click to expand...
Click to collapse
Try this. Hold the volume up button first then the power button. See if this will work.

Thanks, i succeeded with the cable method

edwardob said:
connect to computer while doing and it works
Click to expand...
Click to collapse
Oh man!! you saved my life!! Lots of thanks.

Very helpful!
edwardob said:
connect to computer while doing and it works
Click to expand...
Click to collapse
This works like a charm. I was about to give up my phone because of this predicament, I didn't want to have any issues restoring my phone in the future in case. THANKS A BUNCH!

It's kinda strange but it is bootloader issue. I am on BTK3 firmware (latest Android 10 release) and i'm experiencing such misbehave of key-kombo to enter ot recovery mode since September or October FW update. Has jus tried to downgrade bootloader to initial firmaware (ATGM) by flashing BL in odin and now i can enter recovery by only pressing vol-up + bixby. It work always. Cables, headphones... nothing needed. just keys-combo.
Then i tried to update BL to latest Android 10 (BTK3) and again recovery mode doesn't work. Only if N9860 connected to PC by cable and even with that it doesn't work for me 10 out of 10 times.
Can someone text/call Samsung support to report this issue ?
BTW thanks to @Mentalmuso for helping me!

Same things happen to Android 11.
Tried to flash on my N9860 old BL over Android 11 firmware (was installed before that, all files AP, BL, CP, CSC), flash was ok, but system was unable to load. constantly bootloops. but i was able again to enter recovery without cable and etc. Tried to wipe cache and factory reset from default recovery but no luck - bootloop.
I thought that game over and old BL is not compatible with new android 11.
But then i wanted to try do the same but with custom binaries (@Mentalmuso TWRP and kernel) and ta-da - system loaded from the first try. For me it's surprise. Now i have Android 11 latest FW for TGY (CUA3) with initial BL from the box (ATGM) and everything looks like working fine. No error in OS, no random reboots (at least after 30 minutes of test) and recovery can be simply loaded only by key combo, without any cables, headphones and PC.
I'm happy now =)
Strange thing is that after fladhing old BL system did not show error message that vbmeta changed and some error in vbmeta header. It was showed always on Android 10. But i flashed twrp again (it has vbmeta inside .zip) to be safe lol.