How do I fix my OnePlus One’s bootloop? - ONE Q&A, Help & Troubleshooting

Greetings of the day,
Hello everyone, I'm having a oneplus one 64GB phone that is not getting start, everytime i connect it with the charger it goes into a bootloop. Yes the phone was rooted and I was using a custom ROM with the default kernel. The issue started when I tried to reset the phone to battery settings. I think I somehow messed the kernel and now it is stuck in bootloop. The problem is that I can't connect it to my computer or put it in debug mode as it just restarts again. Any idea how to actually boot it so I can install the kernel and ROM again?

Lazy Titan said:
Greetings of the day,
Hello everyone, I'm having a oneplus one 64GB phone that is not getting start, everytime i connect it with the charger it goes into a bootloop. Yes the phone was rooted and I was using a custom ROM with the default kernel. The issue started when I tried to reset the phone to battery settings. I think I somehow messed the kernel and now it is stuck in bootloop. The problem is that I can't connect it to my computer or put it in debug mode as it just restarts again. Any idea how to actually boot it so I can install the kernel and ROM again?
Click to expand...
Click to collapse
Can it go into recovery mode(power+ vol-)?

Mr.Ak said:
Can it go into recovery mode(power+ vol-)?
Click to expand...
Click to collapse
No, My phone is not getting on but whenever i am connecting it with my charger the phones goes in the Bootloop, and when i am connecting it to My PC while pressing Volume Up + Power Button Pc shows that the Unrecognized devices has been connected.
And i think phone is Hard Bricked. I have tried ADB software and one plus 1 drivers manually but it didn't worked too. I have tried minimal ADB too but it also didn't work.
Kindly let me know about it.

Lazy Titan said:
No, My phone is not getting on but whenever i am connecting it with my charger the phones goes in the Bootloop, and when i am connecting it to My PC while pressing Volume Up + Power Button Pc shows that the Unrecognized devices has been connected.
And i think phone is Hard Bricked. I have tried ADB software and one plus 1 drivers manually but it didn't worked too. I have tried minimal ADB too but it also didn't work.
Kindly let me know about it.
Click to expand...
Click to collapse
Volume UP + Power should boot in fastboot mode. Volume Down + Power should boot into recovery. First, try to boot recovery.

giaur said:
Volume UP + Power should boot in fastboot mode. Volume Down + Power should boot into recovery. First, try to boot recovery.
Click to expand...
Click to collapse
I have tried both, but nothing happens with it, Volume UP + Power shows the unrecognizable device is connected and Volume Down + Power does nothing it continues with bootloop .

Have you got Developer Options enabled?
Goto About Phone & Tap Build Number until Developer Options is activated. Goto Developer Options> Advanced Restart & enable the switch.
Press power button->Restart->Recovery.
It will now boot into Recovery.
Also have you tried keeping hold of power button whilst it bootloops. Keep holding the power button until it powers off. Then press Volume Down & Power Button to power back up (you might see a slight flicker onscreen that means it should go into Recovery mode). Keep hold of these buttons until you gain Access to Recovery Mode.
This will allow you to Recover or flash a different ROM.
If you're having issues connecting to a computer (Windows) try downloading Windows Media Center for your version of Windows. This will install media drivers to recognize your phone.. If all went well you will get the pop up with A0001 (Codename of OnePlus One). From there you should be able to enter fastboot mode through ADB.
If this doesn't help you, I'm sure that someone else will untangle the puzzle to get your device in good working order buddy. Good Luck.

bmark240 said:
Have you got Developer Options enabled?
Goto About Phone & Tap Build Number until Developer Options is activated. Goto Developer Options> Advanced Restart & enable the switch.
Press power button->Restart->Recovery.
It will now boot into Recovery.
Also have you tried keeping hold of power button whilst it bootloops. Keep holding the power button until it powers off. Then press Volume Down & Power Button to power back up (you might see a slight flicker onscreen that means it should go into Recovery mode). Keep hold of these buttons until you gain Access to Recovery Mode.
This will allow you to Recover or flash a different ROM.
If you're having issues connecting to a computer (Windows) try downloading Windows Media Center for your version of Windows. This will install media drivers to recognize your phone.. If all went well you will get the pop up with A0001 (Codename of OnePlus One). From there you should be able to enter fastboot mode through ADB.
If this doesn't help you, I'm sure that someone else will untangle the puzzle to get your device in good working order buddy. Good Luck.
Click to expand...
Click to collapse
he said his device is in bootloop. how come he will turn on the developer option then?

akhiarr said:
he said his device is in bootloop. how come he will turn on the developer option then?
Click to expand...
Click to collapse
This has got to be some sort of World Record for resurrecting an old post from over five years ago. Congratulations on that achievement!
Did you just join to post that?
Lol.

Related

stuck in android system recovery <2e>

i just flash the I9000JH1 to the phone ,i still havent install the kernel to the phone yet and it had boot the home page. and i follow the instruction to reflash again. with Odin3 after i will flashing the CSC and PDA file i unplug and restart the phone and i goes to android system recovery <2e> and i try to reboot but the power button not working....it said
sasung recovery utils
-for BML-
reboot system now
apply sdcard: update.zip
wipe data/factory reset
wipe cache partition
but i can use vol up and down to scroll up and down, but can select the item, the power button is not working.
down there had some yellow words
update media, please wait ...
update media, finished
#menu mode#
- Appling Multi-CSC...
installing Multi-CSC
that the only word it wrote, so wht can i do, is there had any method to reflash the thing??cuz the computer also cant recognize the phone, Thanks
hi ron
im just a noob but i have the same problem yesterday =)
u must flash an kaptivate kernel for a workung power button in the recovery menu!
http://forum.xda-developers.com/showthread.php?t=782413
but i cant even boot up the phone, it stuck in the recovery mode
ron671 said:
but i cant even boot up the phone, it stuck in the recovery mode
Click to expand...
Click to collapse
You need to pull the battery, put it back, and try one of the button combinations to get it into download mode on next boot. Your easiest route is either both volume buttons, and plug in USB without pressing power (which works on the Captivate), or hold just volume down and plug in USB (which is the right combination for an i9000). With one of these the phone should automatically power into the download mode. Get Odin one click ready to flash stock before you put the phone into download mode and hit start when it recognizes the device. If that won't work. try the other key combinations keeping in mind that they change when you flash an i9000 image, so you should try all Captivate combinations, and all i9000 combinations. Since the Captivate lacks a physical home button, anything that involves that will not work, which is the reason why you are stuck in recovery. The i9000 recovery is expecting you to press the home button to select (unlike the power on the stock Captivate).
also, ADB commands should work while the phone is in recovery mode
Same Problem
The Key combination Vol +, Vol - and the power button power cycles the phone whether or not the phone is in recovery mode or off. I am having the same problem, and there are no key combinations that worked for me. For now, I am permanently stuck in recovery mode. I could use some help here, as I have tried everything.
Oh, for the I9000 ROM installed on the captivate, adb commands do not work. While the phone is in recovery mode, you cannot connect to the PC.
I have found though, that by booting into the recovery menu, plugging in your USB cord and then taking out/putting in the battery will put into an unknown upload mode which does connect it to the computer, but not in a way that allows Odin or adb to run. There might be a way to flash/work with the phone, but I don't know how. Any help would be appreciate, as it is not in disk mode.
rajendra82 said:
You need to pull the battery, put it back, and try one of the button combinations to get it into download mode on next boot. Your easiest route is either both volume buttons, and plug in USB without pressing power (which works on the Captivate), or hold just volume down and plug in USB (which is the right combination for an i9000). With one of these the phone should automatically power into the download mode. Get Odin one click ready to flash stock before you put the phone into download mode and hit start when it recognizes the device. If that won't work. try the other key combinations keeping in mind that they change when you flash an i9000 image, so you should try all Captivate combinations, and all i9000 combinations. Since the Captivate lacks a physical home button, anything that involves that will not work, which is the reason why you are stuck in recovery. The i9000 recovery is expecting you to press the home button to select (unlike the power on the stock Captivate).
Click to expand...
Click to collapse
madetoservehim said:
The Key combination Vol +, Vol - and the power button power cycles the phone whether or not the phone is in recovery mode or off. I am having the same problem, and there are no key combinations that worked for me. For now, I am permanently stuck in recovery mode. I could use some help here, as I have tried everything.
Oh, for the I9000 ROM installed on the captivate, adb commands do not work. While the phone is in recovery mode, you cannot connect to the PC.
I have found though, that by booting into the recovery menu, plugging in your USB cord and then taking out/putting in the battery will put into an unknown upload mode which does connect it to the computer, but not in a way that allows Odin or adb to run. There might be a way to flash/work with the phone, but I don't know how. Any help would be appreciate, as it is not in disk mode.
Click to expand...
Click to collapse
1. Take out battery and put it back in
2a Hold Vol Up+Vol Down (Do not press power)
or
2b Hold Vol Down (Do not press power)
3. Plug in USB cable connected to computer (Still do not press power)
If the phone behaves like a Captivate, after using 2a and 3, you should be in download mode. If the phone behaves like an i9000, after 2b and 3, you should be in Download mode.
Response & Update
Have tried both of these options. Either way you do it, the phone still goes back into recovery mode. There was talk about using a custom kernel that would allow you to use the power button as the select button. Is there any way to use adb in recovery mode, so you can install the modified kernel, or reboot to download mode? If not, I started a thread on this question that can be found here as well:
rajendra82 said:
1. Take out battery and put it back in
2a Hold Vol Up+Vol Down (Do not press power)
or
2b Hold Vol Down (Do not press power)
3. Plug in USB cable connected to computer (Still do not press power)
If the phone behaves like a Captivate, after using 2a and 3, you should be in download mode. If the phone behaves like an i9000, after 2b and 3, you should be in Download mode.
Click to expand...
Click to collapse
Did you ever fix this? I'm stuck in recovery mode now and none of the button combinations work
I have the exact same problem. Have you had any luck figuring out how to get the phone to reboot?
really people??
can you not follow step by step instructions?
http://forum.xda-developers.com/showthread.php?t=734871
Pirateghost said:
really people??
can you not follow step by step instructions?
http://forum.xda-developers.com/showthread.php?t=734871
Click to expand...
Click to collapse
I am sure they can.
The 2e and 3e Download and Recovery modes were disabled by Samsung in later models of the SGS. It is not possible to get there using a combination of buttons etc.,
How to install the Download/Recovery Mode fix (3 Button Disabled SPL fix) http://forum.xda-developers.com/showthread.php?t=785201
There may be another method using an AnyWay JIG cable: which is a MicroB USB to Standard USB connector where I think one crosses pin 3 and 4 with a 301kOhm resister 1% tolerance, 1/4Watt. It would be best to search this forum for precise instructions.
Win for a dumb f%^k
well this isnt a good answer but i have a phone that went as discribed, no respose to three button, and unable to flash or get off the system reset screen on start up work on it for about 6 hour then left it when i came back i turned it on plug in the usb and CMD'ed adb reboot download and what did you know this time it worked? reset from that screen and it return to normal sooo.... um good luck and there is a way out just not shore what exactly it is
good for some
okey after fidling around i found my phone responded to adb ie download adb open a cmd line and typing adb reboot download. from there i just cycled the power hold down the power button a while and it rebooted to normal working order. though i still cant get 3 button even with flashing the fix so no hacking for me hope this helps
I'm using the Samsung Fascinate, i500 and i got stuck on the same screen too!!! i just double tapped the home button and rebooted the phone
I was able to get out of a 2e loop by running adb reboot download with odin open, then reflashed from there. Went through the same process twice since cognition 2.3b8 does not want to install on my phone. had no problem with b7 install.
Instructions were not that great. But Thanks -I figured it out and am back up.
Same problem here, cant make my phone go to download mode, ok or select key "power button" not working.
already tried the 2 methods before and they not working, (combination of keys)
Vibrant stuck in android system recovery 2e
I know this is not exact help but i just accidentally found myself into download mode after more key combo fiddling. I believe the last combo that got me in was either holding UP + POWER or just UP at the precise moment the screen goes black to reboot. This is after quite a few boot cycles so trial and error seemed to pull it off.
I'd test it again to be more sure but i don't want to risk being stuck again at this point. But I figured i'd speak up now, because i don't plan to have 2e there ever again.

[Resolved] [HELP] Phone not reacting, power button broken

Hi,
I have a problem with my Motorola Moto G4. I bought it 2 months ago and unfortunately the power button broke and I am therefore not able to turn my phone on/off. That is in general not a problem since the device is still under warranty and I will get the phone repaired. The problem is that I want to backup my data, which I am not able to, before getting the device repaired since the workshop will reset the phone.
I am still able to unlock the phone but no apps or windows can be opened (taping on an app icon does not do anything). Dragging down the notification bar is possible and if connected via USB I can still see the status, unfortunately I am not able to change the setting from charging only to data connection. Since the power button is broken I am not able to reboot the device. I tried to use the adb tools to reboot but the device is not authorized and I would need to change that on the phone which I am not able to. Is there any way to reboot the phone or to access the data.
Any help would be really appreciated.
you might be able to try the commands for adb reboot recovery as the phone is booting up - iv never tried it but adb should be working after the moto splash screen (during the boot animation)
Im not sure if it needs authorisation during that stage but if you cant get into recovery and you cant change the usb connection/authorise adb then I cant see any other way to get the data off
TheFixItMan said:
you might be able to try the commands for adb reboot recovery as the phone is booting up - iv never tried it but adb should be working after the moto splash screen (during the boot animation)
Im not sure if it needs authorisation during that stage but if you cant get into recovery and you cant change the usb connection/authorise adb then I cant see any other way to get the data off
Click to expand...
Click to collapse
I am not really sure how to follow your advice since I am not able to shut down / reboot the phone (power button is not working).
Nem1c said:
I am not really sure how to follow your advice since I am not able to shut down / reboot the phone (power button is not working).
Click to expand...
Click to collapse
In that case I don't see how you can access anything if you have no adb & you can't select anything on the phone
TheFixItMan said:
In that case I don't see how you can access anything if you have no adb & you can't select anything on the phone
Click to expand...
Click to collapse
If I would drain the battery to "shut down" the phone, would there be a way to turn the phone on without the power button?
Nem1c said:
If I would drain the battery to "shut down" the phone, would there be a way to turn the phone on without the power button?
Click to expand...
Click to collapse
with older samsung devices you could use a usb jig to get into download mode without the power button (its a usb cable with some pins crossed you can buy them for only £1 off amazon/ebay)
even if it did work you would still need the power button to select the option to restart phone so the answer is nothing that I can think of
TheFixItMan said:
with older samsung devices you could use a usb jig to get into download mode without the power button (its a usb cable with some pins crossed you can buy them for only £1 off amazon/ebay)
even if it did work you would still need the power button to select the option to restart phone so the answer is nothing that I can think of
Click to expand...
Click to collapse
I found some mechanisms to get the phone turned on and I will try them out. I guess I have nothing to lose.
The interesting thing is that my phone is still receiving messages and news (I see them in the notification bar), so things like that are still working but unfortunately new "widows" can't be opened.
Thank you for your help.
I was able to get the phone rebooted and after the restart everything works as it should.
This is what I did:
Drain the battery (using the flash light), once the battery is flat connect the phone to the PC
Press and hold the volume down button until the Fastboot menu appears
Download ADB tools (the minimal version with adb and fastboot is sufficient)
Install the Motorola driver on the PC (I was not aware that I need this, since connecting the phone without the driver being installed and running adb device results in the device being shown)
run fastboot reboot

Can't enter download mode S10e please help

I have searched and looked for alternatives on how to maybe enter download mode but have not found any solution. I have tried phone off then vol. down + bixby then plug in usb, also pow button + bixby + vol. down then plug usb but every time I do this all I get is a circle with a lightning logo with battery percentage. I also went into recovery mode and tried rebooting into bootloader however that just ends up rebooting back to the recovery menu. Please help. Thank you.
anyone with any tip on what might help or be the issue? I have an exynos version.
wbaez0320 said:
anyone with any tip on what might help or be the issue? I have an exynos version.
Click to expand...
Click to collapse
Hi, try to reboot into bootloader using ADB.
First off thank you for the response.
I tried that as well however maybe I did it wrong. Is it? adb reboot bootloader or adb reboot download
It's so strange you know cause I've tried so many different ways and I thought that rebooting to bootloader from recovery menu would definitely work however all it does is reboot back to my home screen.
Power off phone and just hold down pwr+vol up+ Bigsby for like 8ish seconds and it should boot to download.
Also adb/fastboot is a second route, read through this the below link. Make sure you have the Samsung drivers installed and adb/fastboot properly installed and prerequisites. https://www.theandroidsoul.com/unlock-bootloader-via-fastboot-android/
Or try to boot in safe mode
Hold power button when phone is on, then long press power off, and then select safe mode. https://www.verizonwireless.com/support/knowledge-base-223011/
wbaez0320 said:
I have searched and looked for alternatives on how to maybe enter download mode but have not found any solution. I have tried phone off then vol. down + bixby then plug in usb, also pow button + bixby + vol. down then plug usb but every time I do this all I get is a circle with a lightning logo with battery percentage. I also went into recovery mode and tried rebooting into bootloader however that just ends up rebooting back to the recovery menu. Please help. Thank you.
Click to expand...
Click to collapse
You have activated USB Debugging on Programer options?
yes USB debugging has been activated
NewWorldOrphan9 said:
Power off phone and just hold down pwr+vol up+ Bigsby for like 8ish seconds and it should boot to download.
Also adb/fastboot is a second route, read through this the below link. Make sure you have the Samsung drivers installed and adb/fastboot properly installed and prerequisites. https://www.theandroidsoul.com/unlock-bootloader-via-fastboot-android/
Or try to boot in safe mode
Hold power button when phone is on, then long press power off, and then select safe mode. https://www.verizonwireless.com/support/knowledge-base-223011/
Click to expand...
Click to collapse
well apparently I can't boot into safe mode either, while screen on I long pressed power button then long pressed power of for more then 10 secs but that doesn't do anything
crazy thing is I'm able to boot into recovery with no problem but that's about it. also adb does recognize my device as I can see the characters after inputting "adb devices"

Stuck at entering fastboot mode

How can I get my Galaxy Note 20 Ultra out of stuck at 'entering fastboot mode'?
Hold down power and volume down until it reboots back to recovery. I got stuck there last week and that's what worked for me.
Sent from my SM-N986U1 using Tapatalk
Is this problem solved? I cannot boot into bootloader mode, thanks!
Switch off the device. Then hold volume up and down buttons and insert the USB cable plugged to PC. You will get to download/odin mode
shantanil said:
Switch off the device. Then hold volume up and down buttons and insert the USB cable plugged to PC. You will get to download/odin mode
Click to expand...
Click to collapse
Download mode is different from fatboot mode, I can enter, and works ok download mode. However, fastboot does not, it gets stuck in entering fastboot mode and no fastboot command works
I got same issue here, I've tried rooting via TWRP and after data wipe and "reboot to recovery" it got stuck in same thing and doesn't move at all, if I hold power and vol down it just boots the device which i dont want since i need to flash magisk as a last step. if anyone encountered this or knows how to fix it i'd be helpful
I'm not rooted but I've had past Samsung devices that I was able to root and if I'm not mistaken Samsung phones aren't able to boot into fastboot mode because Samsung removed the ability to. You can run commands via ADB mode but I think that's about it
adj998 said:
I'm not rooted but I've had past Samsung devices that I was able to root and if I'm not mistaken Samsung phones aren't able to boot into fastboot mode because Samsung removed the ability to. You can run commands via ADB mode but I think that's about it
Click to expand...
Click to collapse
Yea I fixed it somehow I don't even know myself
i cant eneter into download mode by using volume up and volume down ... the only thing that happens is the battery display kicks in .. is there a trick on how long to hold the volume bottons .. or any special way of doing it .. or for the usb c while trying to connect it to the computer
it gets stuck into fastboot entering if i try to do it the old fashion way .. please help
Guys, turn off the phone, press volume up and volume down together, and plug the usb cable while pressing volume up and down, and wait until the phone enter in downloading mode. This work for me.
leonardo_evaldy said:
Guys, turn off the phone, press volume up and volume down together, and plug the usb cable while pressing volume up and down, and wait until the phone enter in downloading mode. This work for me.
Click to expand...
Click to collapse
Thanks Man. This worked.
Since we can"t enter into fastboot mode is it possible to flash boot.img with adb commands?
I m having the same problem with a21s(a217f). I can t enter download mode using key combinations and the other way launching it from recovery doesn t work, it stays stuck at,, entering fastboot mode,,
The ROM is already bricked, it says in recovery when i try to factory reset the following error:,, can t mount. /system (structure needs cleaning)
Even with,, apply up. with adb,, doesn t work, it just doesn t get detected on my computer when i checked with adb tools.
! The only thing that works is that I can access my sd card and apply a update from sd card but I don t know where to get the update file. (I ll edit if it works to flash stock rom from,, apply update from sd card,, )
Anybody got some ideas or should i burn my motherboard and replace it?
sorry for bad english
Honestly plug device into PC.
Power off device
hold all 3 side buttons. Volume up and down and power/bixby.
Should usually work.
After in fast boot you must press a button Volume button to find via odin.
ivoe said:
Honestly plug device into PC.
Power off device
hold all 3 side buttons. Volume up and down and power/bixby.
Should usually work.
After in fast boot you must press a button Volume button to find via odin.
Click to expand...
Click to collapse
I already did that, unplugged the battery, reconnected it after 1min, connected my phone to the computer and pressed all 3 side buttons, still doesn t work. I guess the download mode is deleted or something..
Volume up & down, no side key, then connect to PC. Works for me. Connect to PC first does not work for me.
guru96 said:
I already did that, unplugged the battery, reconnected it after 1min, connected my phone to the computer and pressed all 3 side buttons, still doesn t work. I guess the download mode is deleted or something..
Click to expand...
Click to collapse
It wouldn't be deleted as it's a safety protocol if the device has a bad update and freaks out.
Maybe try to person above method.
Normally I can enter download mode with any of these methods if you cannot I'd suggest trying to get the device replaced due to software malfunction
altojd said:
Since we can"t enter into fastboot mode is it possible to flash boot.img with adb commands?
Click to expand...
Click to collapse
Samsung phones use a tool called Odin to flash firmware. If you're flashing custom firmware firmware you'll need to have your bootloader unlocked.
I got mine into download mode just now. It's a Galaxy A13 .. Like stated above, try to hold all three buttons down and connect to USB. I had to let go before it showed the battery charge icon. From off. If not from off try from charging. I think that's what I did just now. Plug the usb -> let it show the charging icon (from powered off!) -> hold all three buttons, let it power on, let go. DONE.
just follow this video it helped me a lot to unlock my boot loader

Question my Galaxy A12 won't boot to android or download mode help me pls

so I just tried to install unofficial TWRP 3.5.0 on my Samsung galaxy a125m and everything went fine, Odin said done. Then I just tried to start TWRP by pressing power and vol up and it didn't start, so I thought I might have done something wrong and rebooted to download mode and flashed it again, Odin said done, then I unplugged the USB cable and now it won't boot, neither to the system or recovery, even to download mode, it did enter download mode a few times before but I pressed the wrong button and had to cancel and enter again, now it won't even enter download mode so I can't flash stock rom to fix bootloop... pls how can I solve this I'm desperate
when I try to enter download mode by pressing volume up + volume down it just shows up charging mode without any numbers, then it turn on and shows Samsung logo, unlocked bootloader warning screen, and the Samsung logo again, but then just restarts and repeats all again...
when I try to press volume up + volume down + power, nothing really happens...
someone help me please
You need to keep both volume up and down pressed, then plug in the charging cable. It should enter download mode, no need to press the power button like in older samsungs.
PhotonIce said:
You need to keep both volume up and down pressed, then plug in the charging cable. It should enter download mode, no need to press the power button like in older samsungs.
Click to expand...
Click to collapse
yeah I did that a lot of times, it used to work now It doesn't anymore
in this video you can see what's going on, I'm pressing both volume keys and nothing happens
Your browser is not able to display this video.
Is the cable plugged into a charger and on?
Have you considered that your volume buttons may not be working?
Same hear
Try attaching your phone to the PC, and then pressing volume down + power to reset the phone, (for about 7~8 seconds) then immediately press the volume down and up buttons, that's how I recovered from it. Tell me if it worked
juliano-oh! said:
Try attaching your phone to the PC, and then pressing volume down + power to reset the phone, (for about 7~8 seconds) then immediately press the volume down and up buttons, that's how I recovered from it. Tell me if it worked
Click to expand...
Click to collapse
Please help it dosent worked
No pc detection
No download mode
No recovery
No charging
Hello, unfortunately in these cases the only solution is to enter download mode, check if any button is damaged or if the cable works and if it is well connected, press the buttons harder, hold down the volume up and volume down buttons at the same time , by pressing the strong buttons, for about 6 seconds and then connect the cable. If you don't try another cable to see if that's the problem there is no other solution as the phone is not recognized by an app that can put it into download mode when turned off the solution is the one I already told you about. I hope you have fixed that problem. Sorry for my bad English.
developeMYWORLD said:
Please help it dosent worked
No pc detection
No download mode
No recovery
No charging
Click to expand...
Click to collapse
To Escape the Black Screen of Death or Bootloop
To boot to RECOVERY MODE
Method 1
First connect phone to the PC for 30 minutes
Hold all 3 keys and release volume down when it buzzes.
Method 2
1. Plug in USB cable to PC
2. Hold down all 3 buttons on phone.
3. When it buzzes release volume down and plug in USB cable to phone.
Then restore your backup or install a ROM
To boot to DOWNLOAD MODE
Method 1
First connect phone to the PC for 30 minutes
Hold all 3 keys and release power when it buzzes.
Method 2
1. Plug in USB cable to PC
2. Hold down all 3 buttons on phone.
3. When it buzzes release power button and plug in USB cable to phone.
Then use Odin to flash official firmware.
@physwizz
I am having a similar problem with the Samsung A12 SM-a125u
I never could enter into this "Downloading mode".
I tried flashing the stock ROM through ADB with fastboot, and I have another problem that I've never seen before: ADB can see the device while in recovery mode, but fastboot can't. And so it won't allow me to flash the ROM and I don't even know how Odin is supposed to help yet; I think I needed to enter Downloading mode for that, but I can't get into it.
I'm working on this phone for a friend who was given it because his friend's mom doesn't remember the password to it. Does that matter? It's worth noting that because of that I cannot get in to turn on OEM unlocking or dev mode, but idk why that would come into play in recovery mode. Also, the model indicates this is an AT&T phone, and tutorials online have acknowledged this model in their "applicable models" list at the beginning of their tutorials, but I know that carrier phones can cause problems all over the place (stop buying carrier locked phones people!); is this a problem?
How the heck do I flash the stock ROM to this this?

Categories

Resources