Hi, I'm not good at english, sorry.
And thank for your help seriously.
I'm using LG G2(LG-F320K) without any kind of customizing(even I didn't turned on USB debugging)
(Now i think that turning off USB Debugging is one of the best mistake that i have ever done )
I didn't touched bootloader, recovery, rom, kernel, and anything else.
(As i said that I even didn't turn on USB Debugging)
3 Days ago, suddenly my G2 is gone(, and i realized that my G2 reboot occasionaly from the day I bought G2.)
After that, When I turn on G2, It boots infinitely
Here's the thing that I tried to unbrick G2
1. Upgrade Recoery through LG Mobile Support Tool
I tried it, but it never works.
It said that it cannot fetch the phone info automatically. Enter more than one info item requested below and press the OK button.
So I entered it, and it seems going well.
But few a minutes later, this tool says "Caution: Primary GPT Partition has an invalid value"
I searche it Google, but google gave no answer except for one Russian Site, and as you expected, the only result has no answer
2.Using KDZ
I found a tool, "LG Flash Tool 2014", and KDZ file for LG-F320K
I launched it by using these options: 3GCQP, Emergency, Normal Flash (to let my data alive)
And same error came out, "Caution: Primary GPT has an invalid value"
I Don't Know What To Do.............
I tried to use other solution but i can't since the solutions totally erase my data in G2
(And I need those data necessarily, can't lose them even if I can't save My G2 from brick)
TOT can't be a solution because it erases my data
Can anyone save my data(or G2) from the error "Caution: Primary GPT Partitioin has an invalid value"??? without losing my data in it?
I asked it many communities but they couldn't give me proper answer.
Thank for your help earlier,
and have a good day
heejuni09 said:
Hi, I'm not good at english, sorry.
And thank for your help seriously.
I'm using LG G2(LG-F320K) without any kind of customizing(even I didn't turned on USB debugging)
(Now i think that turning off USB Debugging is one of the best mistake that i have ever done )
I didn't touched bootloader, recovery, rom, kernel, and anything else.
(As i said that I even didn't turn on USB Debugging)
3 Days ago, suddenly my G2 is gone(, and i realized that my G2 reboot occasionaly from the day I bought G2.)
After that, When I turn on G2, It boots infinitely
Here's the thing that I tried to unbrick G2
1. Upgrade Recoery through LG Mobile Support Tool
I tried it, but it never works.
It said that it cannot fetch the phone info automatically. Enter more than one info item requested below and press the OK button.
So I entered it, and it seems going well.
But few a minutes later, this tool says "Caution: Primary GPT Partition has an invalid value"
I searche it Google, but google gave no answer except for one Russian Site, and as you expected, the only result has no answer
2.Using KDZ
I found a tool, "LG Flash Tool 2014", and KDZ file for LG-F320K
I launched it by using these options: 3GCQP, Emergency, Normal Flash (to let my data alive)
And same error came out, "Caution: Primary GPT has an invalid value"
I Don't Know What To Do.............
I tried to use other solution but i can't since the solutions totally erase my data in G2
(And I need those data necessarily, can't lose them even if I can't save My G2 from brick)
TOT can't be a solution because it erases my data
Can anyone save my data(or G2) from the error "Caution: Primary GPT Partitioin has an invalid value"??? without losing my data in it?
I asked it many communities but they couldn't give me proper answer.
Thank for your help earlier,
and have a good day
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Though there isn't a specific forum for your device model number, you should ask your question here:
[HELP THREAD][Noob Friendly] LG G2 Ask any question
The experts in that thread may be able to help you with your issue.
Good luck!
Related
Hello ,
Ive bricked a LG P350me and need a german stock rom (kzl) endig to flash this with the LG flash tool . Any Idea where i can get one ? I´ve found nothing at the whole internet ...
got one http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP350/ASEABK/V10c_00/V10C_00.kdz from LG server , has anyone the shortcut (ASEABK) for a German Rom ? ... got it ... ADEUAP
think the adminz need to bring a new forum for LG Optimus P350 in here !!
I've bricked my LG P350 too. After i use Call+Vol Up+End, I see this on my screen:
Fastboot mode started:
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange --
STALL GET_DESCRIPTION 128 6 1006 0 18
fastboot: processing commands
What shall I do? Can anyone help me? What programs can I use to restore it?
I recieved today the same error-message:
I thought my p350 is bricked, but I tried with the following progs/images about 5 or 6 hours and my phone runs now with the custom rom.
-recovery-RA-pecan-2.2.1-GNM-drap.img.zip
-fastbootflasherV2.zip
-Pecamod_v0.5.zip
-install usb-driver for lg first. Don't run LG-Software
-open fastbootflasher
-connect phone via usb (several tries)
-flash recovery (recovery-RA-pecan-2.2.1-GNM-drap.img)
-reboot phone while holding volume down ,send + end buttons, than it will start in recovery mode.
-Install Pecamod_v0.5.zip from phone sd-card.
Good Luck
p350 bricked
I got similar error when I plugged my phone to my pc. It says:
Fastboot mode started:
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange -
When not plugged in:
Fastboot mode started:
udc-start()
This is the only forum that tackles this subject/ and was trying to do these steps:
-install usb-driver for lg first. Don't run LG-Software
-open fastbootflasher
-connect phone via usb (several tries)
-flash recovery (recovery-RA-pecan-2.2.1-GNM-drap.img)
-reboot phone while holding volume down ,send + end buttons, than it will start in recovery mode.
-Install Pecamod_v0.5.zip from phone sd-card.
downloaded all of the files from net but unfortunately my pc doesnt detect my p350. I think I have downloaded all of the usb drivers available for my lg phone still no go/
Hey schweitzi67, can you give me a step by step instructions on how you did your recovery? I'd really appreciate it if you will. Thanks in advance.
first of all, since you all can boot into fastboot, NONE of you guys are bricked
and second, heres how to fix your fastboot (now before you continue, remember that you need to replace the lg optimus one files in this link with the files that suit your phone, which is to say that you need to find the kdz file for your phone before you begin this):
http://forum.xda-developers.com/showthread.php?t=1088046
http://forum.xda-developers.com/showthread.php?t=1015332
read through those two links carefully and make sure you know what you are doing because your phone can get bricked if you do something wrong. if you have the slightest doubt go research more
Hi. I tried doing all instructions from the first thread you posted. When everything is ready, plugged my p350, went to command prompt and typed "fastboot erase recovery" but it said "<waiting for device>" I have downloaded lgunited mobile driver from lgsetup (B2CappSetup). What do you think the problem is? Thanks!
joolsthebear said:
Hello ,
Ive bricked a LG P350me and need a german stock rom (kzl) endig to flash this with the LG flash tool . Any Idea where i can get one ? I´ve found nothing at the whole internet ...
got one from LG server , has anyone the shortcut (ASEABK) for a German Rom ? ... got it ... ADEUAP
Click to expand...
Click to collapse
Hey have you found a german rom? I am still searching, but i can´t find any Firmware with ADEUAP regioncode.
Maybe someone know where to get the firmware.
Nice Day
Be careful... I installed kdz wrong and now my phone, it does not work
I heard that can be easily solved if you start downloadmod but I do not know how to do it .... help
sweetnsour said:
first of all, since you all can boot into fastboot, NONE of you guys are bricked
and second, heres how to fix your fastboot (now before you continue, remember that you need to replace the lg optimus one files in this link with the files that suit your phone, which is to say that you need to find the kdz file for your phone before you begin this):
http://forum.xda-developers.com/showthread.php?t=1088046
http://forum.xda-developers.com/showthread.php?t=1015332
read through those two links carefully and make sure you know what you are doing because your phone can get bricked if you do something wrong. if you have the slightest doubt go research more
Click to expand...
Click to collapse
Thank you!! Your first link whas the solution for my problem, it wasn't easy for a noob like me, but it's doable if you follow those instructions very carefully
I'm so happy! thanks again.
my P350 is just dead
Hi Guys,
Have the very same problem here. Tried to flash new ROM, phone entered in yellow emergency screen, got an failed error from KDZ and now the phone is dead.
I can not seem to start it, tried any keys combinations but the phone seems to not respond at all.
If i at least could get into an emergency screen or something but...nothing...black screen and no hearth beat
Is this really the end of it?
Much appreciated for a solution here.
I was using
Device: LG Optimus One P500
Recovery: ClockworkMod 5.0.2.7
Kernel version: 2.6.35.10
Android version: 4.2.1
Current ROM: GenetICS 9.1.7
Then I downloaded another custom ROM [4.2.1]PACman 19.9.0 [PA][AOKP][CM](seems to be deleted now). Stating thats its some updated version of previous ROM.
Downloaded through XDA app and then opened it directly with ROM Manager to install it.
But unfortunately something went wrong and my phone got stuck on boot logo i.e. LG. :silly:
Then I tried to repair it with KDZ updater using V20c-00 firmware. Everything worked fine. I rooted it through SuperOne click and installed CWM recovery through ROM Manager. :victory:
Till then everything was looking under control.
After that I tried to flash another ROM through CWM Recovery, but again i got stuck on Boot Logo. I tried to repair it once again with KDZ updater as I did it previously, but everytime KDZ updater showed error.
Now my phone is not even responding to anything means not with hard keys combos or something. :crying:
I am not able to find any solution for this, even I searched it a lot.
Please please help me.
Edit: If only LG can help me now, can anyone tell me how much it will cost?
Unfortunately, if you removed the battery after KDZ gives out an error, you have hard-bricked your phone. Only LG can help you now
There is an emergency mode you can attempt, as long as you have the software on your computer to flash factory settings on to your phone.
To access emergency mode, do the following:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
*there is also a forum post somewhere here that I learnt this stuff off of...see if you can find it
a_loo said:
There is an emergency mode you can attempt, as long as you have the software on your computer to flash factory settings on to your phone.
To access emergency mode, do the following:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
*there is also a forum post somewhere here that I learnt this stuff off of...see if you can find it
Click to expand...
Click to collapse
I have not had any luck with KDZ or LGMDP with a device stuck in Emergency Mode. I have two P506's that are stuck in Emergency Mode, thanks to KDZ. I have tried every fix I can find here and on several other forums with no luck. I don't want to discourage you, but don't get your hopes up either.
I know this is OT, but...
This is the kind of stuff that we like to see from New Members here at XDA. This is the right way to get your 10 posts. Keep it up
shinobisoft said:
I have not had any luck with KDZ or LGMDP with a device stuck in Emergency Mode. I have two P506's that are stuck in Emergency Mode, thanks to KDZ. I have tried every fix I can find here and on several other forums with no luck. I don't want to discourage you, but don't get your hopes up either.
I know this is OT, but...
This is the kind of stuff that we like to see from New Members here at XDA. This is the right way to get your 10 posts. Keep it up
Click to expand...
Click to collapse
I remember being successful with the LGMDP in emergency Mode with the P500, even though the stock rom that i used didnt quite work with the phone it got me past the boot logo and gave me access back into my recovery. Once you can at least get into the recovery you are golden (for the most part).
OT:
Thanks shinobi. I've been lurking xda for a while now since i got the p500, just recently i really wanted to post in rashed's thread for issues/bugs i found with the cm10.1 rom
a_loo said:
There is an emergency mode you can attempt, as long as you have the software on your computer to flash factory settings on to your phone.
To access emergency mode, do the following:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
*there is also a forum post somewhere here that I learnt this stuff off of...see if you can find it
Click to expand...
Click to collapse
shinobisoft said:
I have not had any luck with KDZ or LGMDP with a device stuck in Emergency Mode. I have two P506's that are stuck in Emergency Mode, thanks to KDZ. I have tried every fix I can find here and on several other forums with no luck. I don't want to discourage you, but don't get your hopes up either.
I know this is OT, but...
This is the kind of stuff that we like to see from New Members here at XDA. This is the right way to get your 10 posts. Keep it up
Click to expand...
Click to collapse
a_loo said:
I remember being successful with the LGMDP in emergency Mode with the P500, even though the stock rom that i used didnt quite work with the phone it got me past the boot logo and gave me access back into my recovery. Once you can at least get into the recovery you are golden (for the most part).
OT:
Thanks shinobi. I've been lurking xda for a while now since i got the p500, just recently i really wanted to post in rashed's thread for issues/bugs i found with the cm10.1 rom
Click to expand...
Click to collapse
No luck to me guys. As I already mentioned that there is no response from phone, not even emergency mode.
Now I tried with even JTAG still no luck.
Went to LG day before yesterday as that was the only hope. But unfortunately my phone is out of warranty and the cost of motherboard is almost equal to the cost of phone itself.
So, that means I have no other option besides keeping it with me as a precious piece of brick.
Thanks to KDZ_Updater.
rishabhgangwar said:
No luck to me guys. As I already mentioned that there is no response from phone, not even emergency mode.
Now I tried with even JTAG still no luck.
Went to LG day before yesterday as that was the only hope. But unfortunately my phone is out of warranty and the cost of motherboard is almost equal to the cost of phone itself.
So, that means I have no other option besides keeping it with me as a precious piece of brick.
Thanks to KDZ_Updater.
Click to expand...
Click to collapse
Now my Phone has the same issue like you'r one. :crying:
Tried every hard button combo. no luck. Now woried because my phone also out of warranty.
Have you repaired your one?
How much cost you new motherboard buddy?
warlock911 said:
Now my Phone has the same issue like you'r one. :crying:
Tried every hard button combo. no luck. Now woried because my phone also out of warranty.
Have you repaired your one?
How much cost you new motherboard buddy?
Click to expand...
Click to collapse
Cost of motherboard from LG was 8800/- Indian Rupees. And the total cost of phone was 9999/- Indian Rupees.
But I got it repaired in 1800/- Indian Rupees with JTAG. Thanks to a local mobile repair shop.
But I am afraid that this service may not be available in your country.
I am also from India buddy. But I don't think so I could fund jtag in my city.
What is your location?
warlock911 said:
I am also from India buddy. But I don't think so I could fund jtag in my city.
What is your location?
Click to expand...
Click to collapse
I am living in delhi. What is your location?
I am from gwalior.
How much time taken by a jtag technician / shop to repair your mobile.????
warlock911 said:
I am from gwalior.
How much time taken by a jtag technician / shop to repair your mobile.????
Click to expand...
Click to collapse
It took around 1 hour.
Hmm
One hour... But 800 buks ... Let Mr see if it is available in my city.
Thanks
lg phoenix p505 softbrick fix
had an lg phoenix that kept giving status 7 errors when I tried to flash in recovery, failures in fastboot, and normal boot just went to black screen
Then I found "how-to-fix-lg-phoenix-fastboot-issues" a page that has working KDZ instructions (after a fashion), now it boots to an ugly fuzzy blue bad driver ancient version of android, but hey, it's alive again!
I would post the link, but spam filter prevents it. it was over at lg-phones dot org.
help
I am having same problem.
Can you tell me contact of mobile of repair shop
rishabhgangwar said:
Cost of motherboard from LG was 8800/- Indian Rupees. And the total cost of phone was 9999/- Indian Rupees.
But I got it repaired in 1800/- Indian Rupees with JTAG. Thanks to a local mobile repair shop.
But I am afraid that this service may not be available in your country.
Click to expand...
Click to collapse
search web for OCTOPUSBOX or MEDUSABOX, this are sites for JTAG sales but they offer software for free, maybe you will have luck
or bring it to repair shop, it will cost you around 20$
Could you pls tell me if this procedure helps in my situation?
a_loo said:
There is an emergency mode you can attempt, as long as you have the software on your computer to flash factory settings on to your phone.
To access emergency mode, do the following:
1) Take out the battery
2) Have a usb cable already connected to the computer.
3) Hold the power button + volume up + back button AND then connect the usb while holding those buttons
Yellow screen will appear with the words emergency mode in the middle.
At this point, do some forum searching, find some kind of stock image file and LG program to flash stock system on to the phone.
*there is also a forum post somewhere here that I learnt this stuff off of...see if you can find it
Click to expand...
Click to collapse
Hi a_loo!
I Have a LG P500 2.3.3 V20e.
I rooted it today without any problem. Loaded ROM manager, flashed ClockworkMod recovery.
Then I downloaded from Cyanogen cm-7.2.0-p500.zip and placed it on the SD card.
And from ROM manager I did an "install ROM from SD card."
It worked for a while the it froze with a cyanogenmod 7 image. None of the controls & buttons and working.
I'm rather new and trying not to panic.
I'd really appreciate your assistance.
kocag said:
Hi a_loo!
I Have a LG P500 2.3.3 V20e.
I rooted it today without any problem. Loaded ROM manager, flashed ClockworkMod recovery.
Then I downloaded from Cyanogen cm-7.2.0-p500.zip and placed it on the SD card.
And from ROM manager I did an "install ROM from SD card."
It worked for a while the it froze with a cyanogenmod 7 image. None of the controls & buttons and working.
I'm rather new and trying not to panic.
I'd really appreciate your assistance.
Click to expand...
Click to collapse
Thanks to the post I was able to boot into recovery, then reload my old ROM from backup. Issue is closed.
Can u Plz upload the stock rom for lg in Kdz format
Sent from my GT-I9082 using Tapatalk 2
---------- Post added at 02:35 PM ---------- Previous post was at 02:29 PM ----------
Can u Plz upload lg stock rom in Kdz format
Sent from my GT-I9082 using Tapatalk 2
Bricked Lg P500
I hard bricked my LG P500 today. It seems there is no hope... No life at all. Oh well... Life sucks I'm in South Africa and don't want to spend money on older phone. I probably did something wrong with LG KDZ, trying to flash stock ROM.
I am new and in need of your help in reinstalling an OS for my unit LG P925 3D. I toyed around with the recovery menu and decided to delete the partition with recovery in it. I also deleted several options hoping that I would be able to bring back a malfunctioning OS with regards to creating a gmail account that it always says that my password is wrong.
My laptop cannot detect the phone when connected to USB. All i know is how to hard restart, in which it keeps on making a loop of the AT&T start up. I know it would be hard for me since im a newbie but with your instructions, I will try.
Thanks in advance.
PS. if possible , what will be the best OS android version for my unit?:crying::good:
Hi everyone ! I am new to forum, so please forgive me if I post into the wrong category .
I have a very big problem with my phone (LG L3 Optimus E400) . I have installed a lot of custom roms on it and yesterday I realized that the current rom I was using doesn't receive text messages so I decided to try antoher one and I had the "great" idea to Flash v20 Baseband for flashing SlimBeane610 rom. That was very silly. After I flashed the rom, I rebooted my phone and nothing happened, screen is black all the time. When I press the power button the phone vibrates and the back and menu buttons lights up for 1 second like normal log on, then boom, all goes black again and if I don't remove the battery and I press the power button or any combination (like Reset, Emergency mode) doesn't work. I googled everything, I found something on this forum but not very useful. I tried wit adb but my phone isn't on so it can't be recognized. I tried wit KDZ Updater (until the phone was recognized) but I get a error like WParam: 100 and LParam: 500. When I connect it with USB sounds are playing like normal and Mobogenie wants to connect with it but I can't enable USB Debugging so it's pissing me off . If I can enable USB Debuggins from PC somehow, maybe I can connect phone with Mobogenie and make a restore , a backup or flash another rom, it would be easy If I can go into recovery or emergency mode but I can't . If it would exist a software that can erase everything on the phone when the it's turned off ... .I tried with LG TOOLS, LG PC SUITE IV, LG FLASH TOOLS, Android MULTI TOOLS and nothing(i have the latest drivers installed). Can I make something to it using the external_sd (like put a flash into it, connect it through PC via USB cable and try to flash a rom from command prompt but I don't know the paths). This is a very hard problem, I have a bricked L3 and I don't know hot to unbrick, I think isn't only a soft problem, maybe I should do something with its hardware ? If anyone could help I would really appreciate .
Thanks in advance !
PS : I won't be able to follow this conversation until the next week because I am going to "Primitive Age" right now...oh God, I'm only good to smash things . :crying:
PodGom said:
The most important thing is, can you see the LG logo that shows up in normal boot? If you don't, it'd be either a screen problem or a hard brick. Nobody except LG can fix these problems, and you would have to pay LG some money to fix the phone. But if you DO see the LG logo and your phone stops, you can try the below options.
It just may be bricked, and you could try getting into recovery and flash an alternative ROM. But if that doesn't work, tryLG mobile support tools to get it back to its stock firmware. Good Luck!
Click to expand...
Click to collapse
No, I can't see the LG logo . If I could saw the LG screen was very easy to fix it. I think the phone it's really dead and I also think that even an authorized service can't fix it . Do you know an approximately price for fixing this issue ? Thanks .
Hi,
You should definitely ask the experts who own your device for help, Here...
http://forum.xda-developers.com/optimus-l3-l5-l7/help
Good luck!
Thank you. Thread closed.
I just wanna know... Does anyone have a definitive answer? Is this fixable? Or am I wasting my time?
If more details are necessary please let me know and I'll get everything I know ASAP.
Long story short, got distracted while unlocking after a successful 6.0 upgrade and I'm not sure what happened. I decided panic was my best course of action and tried to install the original 5.1.1. That's when I got in the qsb qloader 9008 (not exact but something like that) mode where it doesn't turn on, no recovery, no download mode, doesn't show up as a drive on my pic and won't even charge a battery. To me, it appears as though it's completely wiped clean. Dead (but honestly IDK).
I've read and read and read for weeks. About using a small pin to short (force) it into download mode, about something called boarddiag, and a lotta code about partitions I do not quite yet understand.
I thought I read that these were unbrickable but I see there's a lot of people with this problem but only fague and incomplete answers scattered on almost every forum I've read.
I'm not a noob, but this is noob to me. Please help and share your experiences.
Hello,
Hello, you can try this way.
https://forum.xda-developers.com/tmobile-g4/general/lg-g4-h811-complete-unbrick-guide-100-t3461629
I have same problem on LG G4 Stylo MS631, I try with SD card (64GB) which wrote system.img.
My computer recognize phone LGE Android port (COM 41).
Then I try with LGUP, but LGUP unknown it.
Anyone can help me !
Thanks a lot
I've heard something about a "boardiag" but still researching.