I am new and in need of your help in reinstalling an OS for my unit LG P925 3D. I toyed around with the recovery menu and decided to delete the partition with recovery in it. I also deleted several options hoping that I would be able to bring back a malfunctioning OS with regards to creating a gmail account that it always says that my password is wrong.
My laptop cannot detect the phone when connected to USB. All i know is how to hard restart, in which it keeps on making a loop of the AT&T start up. I know it would be hard for me since im a newbie but with your instructions, I will try.
Thanks in advance.
PS. if possible , what will be the best OS android version for my unit?:crying::good:
Related
Hey guys,Yesterday i wanted to update my rom.I have windows mobile 6.1.Apperently with the new rom it makes it faster.I unlocked my device and tried loading the softawre on.Everytime i try loading it ,the computer says it lost the connection with the pc.Today i tried using my phone and when i switch my phone on ,the phone does not respond and the screen has three colour(blue,red etc).How do i get into my phone or reset it so that i can use my existing rom and windows?e-mail me anytime
You're stuck in Bootloader
Hi
Your phone is stuck in Bootloader Mode. You may find that by removing the battery and re-inserting it you will get to a position of loading Windows Mobile. The Bootloader is the software on the phone that is used to install a new operating system. If you search for "Stuck" and "Bootloader" on the forum or the section of your device you will probably come up with some threads about this problem.
The worst case scenario is that the "flash" of the new operating system has gone wrong so the Windows Mobile operating system can not load. If this is the case, the phone will automatically revert to the Bootloader as it can't "see" any system installed. Think of a PC reverting to the BIOS and giving you the message "Operating System Not Found" if you remove or disconnect the hard drive.
If you can't boot simply be doing a soft reset using the stylus in the hole you need to successfully flash a new Operating System or ROM. Check out the Encyclopedia at the bottom of the main forum page if you don't understand any of the words I've used here. If you can be more specific about your device and the ROM you tried to flash others may be able to help.
Cheers
andrew-in-woking
Help
Hi,how do i flash when i dont have excess to windows itself?The colourful screen comes on immidiately when i start my phone!!
XZ5J4H said:
Hi,how do i flash when i dont have excess to windows itself?The colourful screen comes on immidiately when i start my phone!!
Click to expand...
Click to collapse
Welcome to the forum
Please READ the Wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Vox
Over there you´ll dind a way to flash your device
Good luck,
Stuck windows
Hi,I managed to load mono lisa windows 6.1 on my phone.I did this by justing loading utility update file.Followed all the intructions.After the rebooted it just goto stuck.I tried taking the batery out and inserting it back in the phone after 10 seconds.The problem is when i start my phone it gets stuck and the everything in unresponsive.Help me please!!1
Hard Reset or Reflash
Hi
After flashing a ROM you always need to perform a manual Hard Reset. Read the Wiki page on your device for info on how to do this. If that doesn't help then you may have a bad flash. If this is the case then flash the ROM again but as soon as it's done perform a manual hard reset.
If you still can't get it working flash an official operators or HTC ROM to your device.
G'luck!
andrew-in-woking
Rom Wanted
Hi Guys,what is the latest and best rom for a htc s710 today?I want to upgrade.Please help!!Want something that also makes my phone faster.Currently have the VOXrOMwM6.1 cLEAN_V1.3
XZ5J4H said:
Hi Guys,what is the latest and best rom for a htc s710 today?I want to upgrade.Please help!!Want something that also makes my phone faster.Currently have the VOXrOMwM6.1 cLEAN_V1.3
Click to expand...
Click to collapse
Enter to Vox forum and READ a little about all ROM´s there.
The best way is to test severals till you get the one fits your personal needs
Good luck,
I previously had a post on how to flash a new rom onto the tablet because i had done it wrong originally and now i cant use the tablet because it keeps restarting itself. I tried updating the android revolution rom but i clicked on cm9 update instead and now its acting up! It wont let me access the sd card through recovery mode nor through the rom manager app! Someone told me about odin but didn't really explain much else. Any help on how to reset the system through another computer would be really great. Thanks...!
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Sooo,
You probably don't have proper drivers, use PDANet ones, they work even with obscure tablets.
You tried to port CWM or flash?
It's not bricked since your computer detects it
Last thing, do you have a backup recovery image or another recovery image that works so you can get it back up?
Daniel
I was dumb enough not to do any recovery image backups..
Also.. I ported cwm then flashed it with dd just poped the .img into the recovery block.. but since I didn't compile it properly when I adb reboot recovery.. It got into a boot loop.. so I tried to fix it but broke it even more... So then I tried re-writing the firmware for generic 4.1.2 chinese tablet.. but that messed it up to the point were it only shows as M6-CHIP.. i can only turn on and off.. nothing else.. no boot no screen light up nothing..
I can help you BUT....
loureirom_ said:
Hi, I have a Kross GY-601 Tablet... One of the cheap chinese tablet you can pickup at factorydirect (Canada)
I seem to have bricked it when attempting to port Clockwork Mod Recovery to it. It does not show anything on screen or do anything, When I connect it to my computer.. It shows up as M6-CHIP in Device Manager as shown in my image.
The internal storage is completly gone as a result of my failed attempt to un-brick it..
It would be a great help if someone helped me fix this..
Thanks in advance..
-Henrique
PS: I'm only 13 sorry if my description of the problem is a bit bad..
Click to expand...
Click to collapse
Even i am having the same device on its stock rom and kernel so i guess i can help you i was into rooting and upgrading it but didnt do it as i was waiting for a backup device so if i brick it i dont have to wait to buy a device but i am stupid and dont know how to take a backup of the stock rom. If you will help me know how to do that i can help you in return by uploading the stock rom and sharing the link.:highfive:
Hi everyone ! I am new to forum, so please forgive me if I post into the wrong category .
I have a very big problem with my phone (LG L3 Optimus E400) . I have installed a lot of custom roms on it and yesterday I realized that the current rom I was using doesn't receive text messages so I decided to try antoher one and I had the "great" idea to Flash v20 Baseband for flashing SlimBeane610 rom. That was very silly. After I flashed the rom, I rebooted my phone and nothing happened, screen is black all the time. When I press the power button the phone vibrates and the back and menu buttons lights up for 1 second like normal log on, then boom, all goes black again and if I don't remove the battery and I press the power button or any combination (like Reset, Emergency mode) doesn't work. I googled everything, I found something on this forum but not very useful. I tried wit adb but my phone isn't on so it can't be recognized. I tried wit KDZ Updater (until the phone was recognized) but I get a error like WParam: 100 and LParam: 500. When I connect it with USB sounds are playing like normal and Mobogenie wants to connect with it but I can't enable USB Debugging so it's pissing me off . If I can enable USB Debuggins from PC somehow, maybe I can connect phone with Mobogenie and make a restore , a backup or flash another rom, it would be easy If I can go into recovery or emergency mode but I can't . If it would exist a software that can erase everything on the phone when the it's turned off ... .I tried with LG TOOLS, LG PC SUITE IV, LG FLASH TOOLS, Android MULTI TOOLS and nothing(i have the latest drivers installed). Can I make something to it using the external_sd (like put a flash into it, connect it through PC via USB cable and try to flash a rom from command prompt but I don't know the paths). This is a very hard problem, I have a bricked L3 and I don't know hot to unbrick, I think isn't only a soft problem, maybe I should do something with its hardware ? If anyone could help I would really appreciate .
Thanks in advance !
PS : I won't be able to follow this conversation until the next week because I am going to "Primitive Age" right now...oh God, I'm only good to smash things . :crying:
PodGom said:
The most important thing is, can you see the LG logo that shows up in normal boot? If you don't, it'd be either a screen problem or a hard brick. Nobody except LG can fix these problems, and you would have to pay LG some money to fix the phone. But if you DO see the LG logo and your phone stops, you can try the below options.
It just may be bricked, and you could try getting into recovery and flash an alternative ROM. But if that doesn't work, tryLG mobile support tools to get it back to its stock firmware. Good Luck!
Click to expand...
Click to collapse
No, I can't see the LG logo . If I could saw the LG screen was very easy to fix it. I think the phone it's really dead and I also think that even an authorized service can't fix it . Do you know an approximately price for fixing this issue ? Thanks .
Hi,
You should definitely ask the experts who own your device for help, Here...
http://forum.xda-developers.com/optimus-l3-l5-l7/help
Good luck!
Thank you. Thread closed.
Hello all, It's been awhile since I've been on.... A big while But things have changed a lot around and looks great, But on with my question. I have a M horse N9000W MTK6572, And recently tried a sys file restore using titanium backup and the process froze with a error stating that me deviceID had changed, Then the phone proceeded to reboot, But upon booting up it just stays on the android logo. Before this problem I was able to go into factory recovery as I only had the phone rooted but no custom recovery or firmware, And now no recovery using any button combo. I have asked a few on ebay if there jig or jtag would help but they all say not on the china clone as of yet. So is my phone a cool digital android desktop picture, Or is there a method someone knows
My pc nor mac recognize the device anymore either. Thanks in advance for any info or help
Hi,
I have searched and do not find information that is helpful.
With no recovery and no recognition from the computer, I'm afraid this is a hard brick.
Sorry, I know it is not what you wanted to hear. - support for almost any clone device is scarce at best.