I just wanna know... Does anyone have a definitive answer? Is this fixable? Or am I wasting my time?
If more details are necessary please let me know and I'll get everything I know ASAP.
Long story short, got distracted while unlocking after a successful 6.0 upgrade and I'm not sure what happened. I decided panic was my best course of action and tried to install the original 5.1.1. That's when I got in the qsb qloader 9008 (not exact but something like that) mode where it doesn't turn on, no recovery, no download mode, doesn't show up as a drive on my pic and won't even charge a battery. To me, it appears as though it's completely wiped clean. Dead (but honestly IDK).
I've read and read and read for weeks. About using a small pin to short (force) it into download mode, about something called boarddiag, and a lotta code about partitions I do not quite yet understand.
I thought I read that these were unbrickable but I see there's a lot of people with this problem but only fague and incomplete answers scattered on almost every forum I've read.
I'm not a noob, but this is noob to me. Please help and share your experiences.
Hello,
Hello, you can try this way.
https://forum.xda-developers.com/tmobile-g4/general/lg-g4-h811-complete-unbrick-guide-100-t3461629
I have same problem on LG G4 Stylo MS631, I try with SD card (64GB) which wrote system.img.
My computer recognize phone LGE Android port (COM 41).
Then I try with LGUP, but LGUP unknown it.
Anyone can help me !
Thanks a lot
I've heard something about a "boardiag" but still researching.
Related
Hello everyone,
My first time in this site and been reading a lot of posts. I wonder if anyone can help me out with this problem.
I was dusting off my old nexus 7 in order to use for college. The current lollipop versions brought the speed of the device way down. I been reading that plenty of people have the same problem with the new version. I went searching for a way to revert back to kitkat so my tablet can be usable again. Anyways after reading and watching videos I found a good one. I would post it but since I am new tot the forums it restricts me. I followed it step my step even downloaded the correct nexus 2012 wifi kitkat version but when I was flashing the device on the command prompt it kept saying telapia folder was not found. I made sure the file was placed correctly but was still giving me the error. Then I made the mistake of unplugging the usb cable then the tablet shut down. Now the screen won't turn on and under device manager it shows the device as an "APX." I know the physical hardware isn't damaged because I can here the ding noise when I plug the tablet to the computer. Please if anyone has a step to step guide to recover the device that would be awesome. Thank you.
Hi,
Unfortunately, it does not look good for your device. You can read a similar situation here, and try what's recommended...
http://forum.xda-developers.com/showthread.php?t=2477631
Other than that, you may not have any luck here.
But I hope you figure it out somehow! :good:
Hello good kind hearted fellow reading this,
I was trying to root my Old NVIDIA Shield tablet LTE which I foolishly updated to 6.0 so I could remove the tegra.OTA apk and prevent the kill switch.
I first followed the instructions in this thread: http://forum.xda-developers.com/shield-tablet/general/how-to-root-nvidia-tablet-android-6-0-t3280671 then lost Wifi.
I then decided to follow the instructions in this thread: http://forum.xda-developers.com/shield-tablet/general/unofficial-update-original-shield-t3281541, then after step 3 where I flashed the blob.img, I rebooted the tablet as directed, but now nothing happens. It won't come on so I can proceed with the procedure, It is not recognised in ADB, It only shows up in my device manager as APX when I plug it in and shows the green/orange light which indicates charging. The screen remains BLACK>
The bootloader is already unlocked
Is all hope lost??? Is there anyway to revive this? PLEASE HELP ME...
I have read through threads which i searched for using the keyword "BRICK", but I dont seem to be able to find anything that can help.
Thanks a bunch!
Only NVIDIA can help you, once your Tablet does not boot into the bootloader
http://forum.xda-developers.com/shield-tablet/help/help-help-bricked-shield-tablet-original-t3313428
also:
http://forum.xda-developers.com/shield-tablet/general/kill-kill-switch-shield-tablet-xx-t3179489
njhuiz said:
Only NVIDIA can help you, once your Tablet does not boot into the bootloader
http://forum.xda-developers.com/shield-tablet/help/help-help-bricked-shield-tablet-original-t3313428
also:
http://forum.xda-developers.com/shield-tablet/general/kill-kill-switch-shield-tablet-xx-t3179489
Click to expand...
Click to collapse
*tears*
Just call NVIDIA and talk to them. If it's only a software problem (flashing gone bad), they can fix it in 10 minutes. As far as I can remember somebody in the first thread I linked, talked about returning the tablet for repair after talking to them.
Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.
Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
way2aware said:
Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.
Click to expand...
Click to collapse
Prajiro said:
Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
Click to expand...
Click to collapse
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.
way2aware said:
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.
Click to expand...
Click to collapse
Finally got the process started,...but after 7s I got and error message Reached the end of the file.(0x80070026: Receiving hello packet)
Could it be my PC (win 10 32 bit) problem or what do you think?
This happened to me as well, the first and second time I tried the flash. There is a trick which worked for me... I pulled the battery out and put it back in and while holding the volume 'up' button, I plugged my phone into my computer usb port and let windows install the driver. It took a few seconds and then I clicked 'refresh' on the Miflash window, which I had left on. At this point the 'flash' button became available and I clicked on it. This time the flash was successful. Try it.
A few weeks ago I put my phone on its charger overnight, and it was totally dead in the morning. I could only get to the qualcomm qdloader 9008 mode, so I followed this guide to unbrick it. I got to the point where I have a working bootloader and recovery, though I have the US variant, and it now thinks it's the WW variant. Possibly because of this, it's just hanging at the zenfone boot animation. Progress, but not exactly working.
Is there 1) any way to get it thinking it's the US variant again and 2) get it booting properly? Those questions may have a single answer, not sure if they're related.
Just a bump, been a long time and I found this in my drawer. Anyone know if there's a way to save this phone?
I have no idea what happened beside the battery completely drained and I was left hard bricked. I only have the blinking led. No mode beside EDL. Was rooted, stock rom android 11 and stock recovery. Phone had been stolen and possibly had someone trying to get in it. Appeared fine and in working order before it died though.
I have tried 3 different version blankflash files. I have been using sofiap. A few times (tried about 50x) they went all the way through to "fastboot reboot", but fastboot NEVER opens. Just same situation as before. May be an issue with singleimage.bin? Since blankflash doesn't seem to be effective, can I use another program (Qualcomm programs, Flash tools or other)? I have tried finding a solution, searched endlessly and have the same brick I had.
Please advise and help with the exact files, links, etc. The easiest way would be awesome. I would greatly appreciate any/all assistance.
Jaymi
jayleemcnabb81 said:
I have no idea what happened beside the battery completely drained and I was left hard bricked. I only have the blinking led. No mode beside EDL. Was rooted, stock rom android 11 and stock recovery. Phone had been stolen and possibly had someone trying to get in it. Appeared fine and in working order before it died though.
I have tried 3 different version blankflash files. I have been using sofiap. A few times (tried about 50x) they went all the way through to "fastboot reboot", but fastboot NEVER opens. Just same situation as before. May be an issue with singleimage.bin? Since blankflash doesn't seem to be effective, can I use another program (Qualcomm programs, Flash tools or other)? I have tried finding a solution, searched endlessly and have the same brick I had.
Please advise and help with the exact files, links, etc. The easiest way would be awesome. I would greatly appreciate any/all assistance.
Jaymi
Click to expand...
Click to collapse
Hard bricked mine too.
Metro G Stylus 2021.
acrinym said:
Hard bricked mine too.
Metro G Stylus 2021.
Click to expand...
Click to collapse
I Switched to Slot B and now it doesn't do anything except go into EDL.
Hey @sd_shadow, any idea what we could do to fix this mess? This is a phone I'm supposed to return.
I'm still stuck with a brick. Have been for months. Took it apart (why not it doesn't work anyway) and tried the points thing to put it in edl and still nothing. WE NEED ADVICE PRETTY PLEASE.
Thanks in advance,
Jaymi
acrinym said:
Hey @sd_shadow, any idea what we could do to fix this mess? This is a phone I'm supposed to return.
Click to expand...
Click to collapse
If it's a warranty return it shouldn't matter