Hi Guys,
I have the Samsung galaxy S duos (7582) and I believe that my phone has soft bricked.
1. At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2. I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to hert screen with Samsung logo and phone model) with connecting to charger e or PC.
3. The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons.
4. Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying:
[email protected] said:
Hi Guys,
I have the Samsung galaxy S duos (7562) and I believe that my phone has soft bricked.
1. At first the phone will switch on only while connected to charger. Even if its switched on it will just show the start page with Samsung logo and phone model only.
2. I have replaced the battery and tried but it shows the same result. Doesn’t charged up but can switch on the phone (only to the start screen with Samsung logo and phone model) with connecting to phone or PC.
3. The mobile phone is not detected by the PC, but the same has detected by odin. I have passed in odin but unable to access the recovery mode by pressing volume up+home+power buttons.
4. Finally I tried to flash stock rom with Odin and it shows Fail.
Appreciate your help.
:crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Try following this guide http://forum.xda-developers.com/s7562/general/troubleshoot-pit-file-baseband-files-t3246791 it should save it.
billysam said:
Try following this guide http://forum.xda-developers.com/s7562/general/troubleshoot-pit-file-baseband-files-t3246791 it should save it.
Click to expand...
Click to collapse
sam,
hi billy sam,
am really sorry that i have mentioned the phone model as 7562 instaed of 7582. kindly provide the link for 7582 as well let me try to do it. also today when i connected my phone to charger it shows the message that " firmware upgrade encountered an issue. please select recovery mode in kies & try again"
[email protected] said:
sam,
hi billy sam,
am really sorry that i have mentioned the phone model as 7562 instaed of 7582. kindly provide the link for 7582 as well let me try to do it. also today when i connected my phone to charger it shows the message that " firmware upgrade encountered an issue. please select recovery mode in kies & try again"
Click to expand...
Click to collapse
Well you were saved. always make sure about the device model before flashing. anyways it's the wrong thread here. its not a big issue and don't need very complex method. just download the stock firmware you want from sammobile and flash it through odin.
Related
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
http://support.t-mobile.com/docs/DOC-4484
Not your device but its should be similar. Hope it works for you.
No luck so far, is there no way to get past this screen?
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Sean_Seany said:
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Click to expand...
Click to collapse
No nothing, windows does recognize it and will install the driver. But Odin doesn't show anything happening and Kies just shows connecting. When you select emergency recovery in Kies it will stop trying to connect and bring up a dialog box asking for a recovery code. Apparently if the failure would have happened during a legit upgrade using Kies it would have generated an error code for recovery. Is there no way to repair this? Thought Samsung devices were suppose to be so easy to customize? Please help my son is pretty pissed.
Sent from my icrap 2 using Tapatalk HD
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
One thing. Always update your table with OTA or Kies. ODIN breaks the warrantie
Sent from my GT-P3110 using xda premium
Sweeeet ! Well played :good::good::good::good:
Same issue, different solution...
cruise350 said:
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
Click to expand...
Click to collapse
I bricked my device from Odin while trying to revert from a CM10.1 nightly to stock JB. Device picked up in Odin, but would not flash... unless I reboot the device after I clicked start in Odin. Dunno why, but it loaded stock firmware on the error screen... don' ask me how...
I have experienced this. Run ODIN, then connect your devices to the computer. When ODIN detect it, unplug and then replug your device. When ODIN back detect it then flash.
Recent versions of Odin work the other way around. First plug then open. Older like <1.87, first you open the program then you plug device. Glad it got solved.
Sent from my HTC One VX using xda premium
I have also hit this screen several times while playing with roms, this is a fairly common example of "softbrick". Fortunately for me, Odin had no problems connecting, and then simply flashed an oem rom. I have not been able to hard brick this thing, which is a huge surprise considering all the flashing I've done. Frankly I'm surprised it hasn't blown up like an iraqi IED yet lol!
This is a good thing! It means that Samsung built in a good failsafe. It just means you hosed your rom install all the way down to the bootloader. Easy to recover from
Glad ya learned to fix it!
Big problems with my Samsung Galaxy Tab 2 10.1
cruise350 said:
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
Click to expand...
Click to collapse
Hi, my problem is identical. I have a samsung galaxy tab 2 10.1 and after a failed update with Odin the message was:Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I try again with Odin and nothing. I used Kies, and nothing. Then i saw a reference to the md5 philz_touch_5.03.7-p5110.tar.md5 and i use it with Odin. Sucess but the message was RESET. Everithing disappeared from screen except the battery logo. The tablet is always on and with that image. The volume buttons and power don't work and it is not detected.
I'm affraid the thing is bad.
Can you help? Thank you.
Djadomor
Hey cruise, would you happen to still have the file you used on your son's box? The only page I can find won't let me in.
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try agai
Hi. I got the problem where I cant use my tab, because it just shows this message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
It happened because I tried rooting my tab in Odin. At first it failed, I tried it a second time and it kind of lagged.. so being my stupid self I disconnected the tab and since then I have this problem.
I tried looking for some resolutions, but half of them either uses Odin:
1. which I really dont know how to use
2. which considers the tab being in download mode. My tab cant even do that.. when I hold the Power+home+volume down buttons, the screen goes black and then the same message comes back.
The second half of resolutions is with Kies. I didnt know about Kies earlier, so it doesnt have my tab details stored there.
I dont know if Kies has to have your tab stored to use the 'Firmware Upgrade and Initialisation' option, but I tried in anyway. When I write in my model, which is SM-T230NU, it shows that the model information I entered cannot be verified.
When I charged my tab a bit and connected to my computer, Kies isnt able to find it. It finds that something is connected, because it shows that it's connecting, but then it stops, then connects, and the same over and over.
Anyways, I have a Samsung galaxy Tab 4 7.0, model SM-T230NU, and I really want to try and repair it on my own before I give it to service.
Please dont hate on my stupidity, because I'm not really into technology..
Hi, thank you for using XDA Assist. You're are going to have to flash the stock firmware in Odin. Go to sammobile.com for the firmware and see this on how to use Odin,http://forum.xda-developers.com/showthread.php?t=1372414. If you can't get into download mode that's going to be a big problem. You can look for help by posting here, http://forum.xda-developers.com/tab-4/help
Thread closed.
my samsung tablet went through a tough time because it had no os and wasnt installing one so i went to odin and downloaded the stock rom then flashed it by odin while my tab was connected in download mode. suddenly the connection got unplugged while installing the new rom leaving me with a black screen. the real issue here is that i cant save my tab because it doesnt get to recovery nor download mode so im basically left with a useless piece of junk. i think there is a way to get it back because my computer recognizes it but odin doesnt. if i could get it to boot into download mode, i can get it back. but i dont know how...
my tab is samsung galaxt tab 3 lite sm t111.
pls help urgent!!!
kimosab said:
my samsung tablet went through a tough time because it had no os and wasnt installing one so i went to odin and downloaded the stock rom then flashed it by odin while my tab was connected in download mode. suddenly the connection got unplugged while installing the new rom leaving me with a black screen. the real issue here is that i cant save my tab because it doesnt get to recovery nor download mode so im basically left with a useless piece of junk. i think there is a way to get it back because my computer recognizes it but odin doesnt. if i could get it to boot into download mode, i can get it back. but i dont know how...
my tab is samsung galaxt tab 3 lite sm t111.
pls help urgent!!!
Click to expand...
Click to collapse
Hello.
Thank you for using XDA Assist.
Please post your questions here:
http://forum.xda-developers.com/galaxy-tab-3/help
That's the specific help forum for your device.
Your device experts are located there.
Good luck!
I realize i'm stupid af but here's what happened: I was trying to flash a custom rom to my SM-G920F galaxy s6 and accidentally uninstalled my OS. This morning I attempted to flash G920FXXU2POGN to my galaxy 6, I have no idea what the original software was. Everything was going fine until the last minute when hidden.img appeared in the odin log and the flash failed. My device now reads: An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC software. However, neither smart switch of kies 3.0 support my device!! My device is still bootable into download mode. Please please please help. I've only had this thing for a day and I've already broken it.
moved to the SGS6 Q&A forum.
mcmullan510 said:
I realize i'm stupid af but here's what happened: I was trying to flash a custom rom to my SM-G920F galaxy s6 and accidentally uninstalled my OS. This morning I attempted to flash G920FXXU2POGN to my galaxy 6, I have no idea what the original software was. Everything was going fine until the last minute when hidden.img appeared in the odin log and the flash failed. My device now reads: An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC software. However, neither smart switch of kies 3.0 support my device!! My device is still bootable into download mode. Please please please help. I've only had this thing for a day and I've already broken it.
Click to expand...
Click to collapse
Hi there, you should download smart switch and use emergency firmware recovery, From there you should click 'more' then click emergency software recovery. Key in your device SM-G920F then input your serial number (Found on your device Box, remember to connect your phone on download mode) then voila, it should download and install the latest firmware for you. hope it helps!
Hello there, I am already more than 3 days trying to download stock firmware for my phone, every day another problem, on the beginning it was always fail while trying with Odin, then I was try another firmware it was downloaded but stucked on update 32%.i understand it can be wrong firmware, I tried other methods, I was add pit for Samsung galaxy s6 edge G925F. Downloaded but didn't help, I tried another firmware for other region it was downloaded, even no fail, but stucked on erasing. I tried recovery mode (volume up-home-power) cant access it. Today I try again, all the time stuck on Initialization.
Note I tried different Odin version.
USB on laptop there's two, 2.0 and 3.0(blue)
The time it was succeed without fail it was on the black USB 2.0
So now even completely can't start to download firmware.
Also I was try to download Twrp after it was nearly succeeded and stucked on erasing, hoping that I can access recovery mode to wipe everything, but Twrp stucked on logo.
After all that I can't do nothing.
I still can access downloading mode and phone stuck on logo if I put it on the charge.
I hope I was give right and enough informations to help me solve the issue.
I appreciate any help
Willy1993 said:
Hello there, I am already more than 3 days trying to download stock firmware for my phone, every day another problem, on the beginning it was always fail while trying with Odin, then I was try another firmware it was downloaded but stucked on update 32%.i understand it can be wrong firmware, I tried other methods, I was add pit for Samsung galaxy s6 edge G925F. Downloaded but didn't help, I tried another firmware for other region it was downloaded, even no fail, but stucked on erasing. I tried recovery mode (volume up-home-power) cant access it. Today I try again, all the time stuck on Initialization.
Note I tried different Odin version.
USB on laptop there's two, 2.0 and 3.0(blue)
The time it was succeed without fail it was on the black USB 2.0
So now even completely can't start to download firmware.
Also I was try to download Twrp after it was nearly succeeded and stucked on erasing, hoping that I can access recovery mode to wipe everything, but Twrp stucked on logo.
After all that I can't do nothing.
I still can access downloading mode and phone stuck on logo if I put it on the charge.
I hope I was give right and enough informations to help me solve the issue.
I appreciate any help
Click to expand...
Click to collapse
You should identify the exact device model.
Then check to download the stock Samsung firmware for this model.
You can read about it here:
[Stock Firmware] Official Stock Firmware for ALL Galaxy S6 Edge Variants [Latest]
Reserved
forum.xda-developers.com