I need some help trying to bring back to life my P6810.
I think I did something wrong because when im in download mode it says product name: GT-P7560 and when i connect it to ODIN it failed to upload the firmware to the device, and since then it just shows me the Phone-Exclamation-PC sign, The device doesnt goto recovery and none of the buttons work.
Do you think Ive got a weird device with a faulty download mode? What do you suggest I do.?
It sounds like you have the wrong ROM .
yes, wrong rom is too dangerous, I really hope that you didn't brick your precious tab,
well try to restock with the original P6810, you can find it on samobile.com, under firmwares and files, then choose you tab and get the needed files.
flashing instructions should be also there (zip file)
best regards
Sifou
Galaxy Tab 7.7
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
http://support.t-mobile.com/docs/DOC-4484
Not your device but its should be similar. Hope it works for you.
No luck so far, is there no way to get past this screen?
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Sean_Seany said:
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Click to expand...
Click to collapse
No nothing, windows does recognize it and will install the driver. But Odin doesn't show anything happening and Kies just shows connecting. When you select emergency recovery in Kies it will stop trying to connect and bring up a dialog box asking for a recovery code. Apparently if the failure would have happened during a legit upgrade using Kies it would have generated an error code for recovery. Is there no way to repair this? Thought Samsung devices were suppose to be so easy to customize? Please help my son is pretty pissed.
Sent from my icrap 2 using Tapatalk HD
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
One thing. Always update your table with OTA or Kies. ODIN breaks the warrantie
Sent from my GT-P3110 using xda premium
Sweeeet ! Well played :good::good::good::good:
Same issue, different solution...
cruise350 said:
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
Click to expand...
Click to collapse
I bricked my device from Odin while trying to revert from a CM10.1 nightly to stock JB. Device picked up in Odin, but would not flash... unless I reboot the device after I clicked start in Odin. Dunno why, but it loaded stock firmware on the error screen... don' ask me how...
I have experienced this. Run ODIN, then connect your devices to the computer. When ODIN detect it, unplug and then replug your device. When ODIN back detect it then flash.
Recent versions of Odin work the other way around. First plug then open. Older like <1.87, first you open the program then you plug device. Glad it got solved.
Sent from my HTC One VX using xda premium
I have also hit this screen several times while playing with roms, this is a fairly common example of "softbrick". Fortunately for me, Odin had no problems connecting, and then simply flashed an oem rom. I have not been able to hard brick this thing, which is a huge surprise considering all the flashing I've done. Frankly I'm surprised it hasn't blown up like an iraqi IED yet lol!
This is a good thing! It means that Samsung built in a good failsafe. It just means you hosed your rom install all the way down to the bootloader. Easy to recover from
Glad ya learned to fix it!
Big problems with my Samsung Galaxy Tab 2 10.1
cruise350 said:
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
Click to expand...
Click to collapse
Hi, my problem is identical. I have a samsung galaxy tab 2 10.1 and after a failed update with Odin the message was:Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I try again with Odin and nothing. I used Kies, and nothing. Then i saw a reference to the md5 philz_touch_5.03.7-p5110.tar.md5 and i use it with Odin. Sucess but the message was RESET. Everithing disappeared from screen except the battery logo. The tablet is always on and with that image. The volume buttons and power don't work and it is not detected.
I'm affraid the thing is bad.
Can you help? Thank you.
Djadomor
Hey cruise, would you happen to still have the file you used on your son's box? The only page I can find won't let me in.
Hi guys
I have posted this in the proper device section but no one has replied and I really need my tablet working again even if i return it back to the way it was with the stock firmware it came with. So sorry about this but I am getting desperate
The post is here: http://forum.xda-developers.com/galaxy-note-8-0/general/help-stuck-download-mode-t2959806
I have a GTN5120 Samsung Galaxy Note 8.0 and I am stuck in download mode and I cant get out of it, I have tried turning it on and selecting down volume button to restart the phone and it still reboots into download mode
please help
Hello! I have a problem caused by an ODIN failure and I was wondering if I can get any help. My tablet is a GT P1000N and I updated my ROM to Lollipop 5.0. It worked perfect for around 2 weeks when suddenly when I was watching a You Tube video it start rebooting again and again so I downgrade it to stock rom and install Lollipop 5.1 by hygoandroid but I didn’t like it because my tablet was having problems with the screen and the notification bar also. And here is where my problems started. I flashed stock room via ODIN again to install Lollipop 5.0. I put everything in order to flash it and the process began but suddenly stop. I leave it like 30 min and then I realized it was stuck. So I disconnect the tab and shut it down. When I turn the download mode on again it was the cellphone exclamation sign computer and following a tutorial I recovered the tab and put it back to the normal download mode. I flashed the stock rom again and it didn’t get stuck but ODIN said FAILED. I put reset in Odin and put all the files again and press start but It didn’t make any change in my tab. I tried this like 3 times and then I try to put the tab again into recovery but the tab was in black. I tried to connect the tab to the computer and the computer recognized it (make the sound when you plug an usb) and I when I press the power button to shut down the computer makes the disconnect sound. Neither ODIN 3-V1-7 or heimdall suite 1.3.1 recognize my tab but my computer does like I explained. I hope anyone can help me. I know my tab is old but it was working great and I’m an engineering student that doesn’t have any money to buy a new one.
I wish everyone a great day. I speak Spanish, I did my best to write this in English. If something is not clear enough ask me.
Thanks!
Hi there
You'd be best served asking for help from the experts who own your device, here
> Samsung Galaxy Tab > Galaxy Tab Q&A, Help & Troubleshooting
Good luck
Hello there, I am already more than 3 days trying to download stock firmware for my phone, every day another problem, on the beginning it was always fail while trying with Odin, then I was try another firmware it was downloaded but stucked on update 32%.i understand it can be wrong firmware, I tried other methods, I was add pit for Samsung galaxy s6 edge G925F. Downloaded but didn't help, I tried another firmware for other region it was downloaded, even no fail, but stucked on erasing. I tried recovery mode (volume up-home-power) cant access it. Today I try again, all the time stuck on Initialization.
Note I tried different Odin version.
USB on laptop there's two, 2.0 and 3.0(blue)
The time it was succeed without fail it was on the black USB 2.0
So now even completely can't start to download firmware.
Also I was try to download Twrp after it was nearly succeeded and stucked on erasing, hoping that I can access recovery mode to wipe everything, but Twrp stucked on logo.
After all that I can't do nothing.
I still can access downloading mode and phone stuck on logo if I put it on the charge.
I hope I was give right and enough informations to help me solve the issue.
I appreciate any help
Willy1993 said:
Hello there, I am already more than 3 days trying to download stock firmware for my phone, every day another problem, on the beginning it was always fail while trying with Odin, then I was try another firmware it was downloaded but stucked on update 32%.i understand it can be wrong firmware, I tried other methods, I was add pit for Samsung galaxy s6 edge G925F. Downloaded but didn't help, I tried another firmware for other region it was downloaded, even no fail, but stucked on erasing. I tried recovery mode (volume up-home-power) cant access it. Today I try again, all the time stuck on Initialization.
Note I tried different Odin version.
USB on laptop there's two, 2.0 and 3.0(blue)
The time it was succeed without fail it was on the black USB 2.0
So now even completely can't start to download firmware.
Also I was try to download Twrp after it was nearly succeeded and stucked on erasing, hoping that I can access recovery mode to wipe everything, but Twrp stucked on logo.
After all that I can't do nothing.
I still can access downloading mode and phone stuck on logo if I put it on the charge.
I hope I was give right and enough informations to help me solve the issue.
I appreciate any help
Click to expand...
Click to collapse
You should identify the exact device model.
Then check to download the stock Samsung firmware for this model.
You can read about it here:
[Stock Firmware] Official Stock Firmware for ALL Galaxy S6 Edge Variants [Latest]
Reserved
forum.xda-developers.com