I need some help trying to bring back to life my P6810.
I think I did something wrong because when im in download mode it says product name: GT-P7560 and when i connect it to ODIN it failed to upload the firmware to the device, and since then it just shows me the Phone-Exclamation-PC sign, The device doesnt goto recovery and none of the buttons work.
Do you think Ive got a weird device with a faulty download mode? What do you suggest I do.?
It sounds like you have the wrong ROM .
yes, wrong rom is too dangerous, I really hope that you didn't brick your precious tab,
well try to restock with the original P6810, you can find it on samobile.com, under firmwares and files, then choose you tab and get the needed files.
flashing instructions should be also there (zip file)
best regards
Sifou
Galaxy Tab 7.7
Related
Hello
I was flashing my Galaxy W but suddenly it stucked at AMSS....I just pulled of the cable and now when I turn on my phone, it says: Firmware upgrade encountered an issue.
How can I bring it back?!
TIA
You will need to put it in Download Mode, grab ODIN and flash one of these. Go back to stock, get it working, then start over
Good luck!
Firmware encountered an Issue...
Hi.
Im posting this here since this is the closest ive come to my own problem.
i was updating my samsung xcover when the update failed (due to bad cable) now i get the error message on my phone
"Firmware upgrade encountered an issue. Please select recovery mode in kies & try again"
only kies wont connect with the phone and the phone wont appear in the recovery tool. any help would be great!
The phone i have is a Galaxy Xcover with stock firmware
no mods nothing.
Any help would be great!
Thank you on beforehand
juzz86 said:
You will need to put it in Download Mode, grab ODIN and flash one of these.
Good luck!
Click to expand...
Click to collapse
Ah yes, but which one?
I've looked through the thread, doesn't seem like anyone's laid out a guideline for it. However, if you happen to know, could you tell me which one I'd need for my phone?
PDA: I8150XXLA2
PHONE: I8150XXKL3
CSC: I8150OXXKL4
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
http://support.t-mobile.com/docs/DOC-4484
Not your device but its should be similar. Hope it works for you.
No luck so far, is there no way to get past this screen?
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Sean_Seany said:
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Click to expand...
Click to collapse
No nothing, windows does recognize it and will install the driver. But Odin doesn't show anything happening and Kies just shows connecting. When you select emergency recovery in Kies it will stop trying to connect and bring up a dialog box asking for a recovery code. Apparently if the failure would have happened during a legit upgrade using Kies it would have generated an error code for recovery. Is there no way to repair this? Thought Samsung devices were suppose to be so easy to customize? Please help my son is pretty pissed.
Sent from my icrap 2 using Tapatalk HD
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
One thing. Always update your table with OTA or Kies. ODIN breaks the warrantie
Sent from my GT-P3110 using xda premium
Sweeeet ! Well played :good::good::good::good:
Same issue, different solution...
cruise350 said:
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
Click to expand...
Click to collapse
I bricked my device from Odin while trying to revert from a CM10.1 nightly to stock JB. Device picked up in Odin, but would not flash... unless I reboot the device after I clicked start in Odin. Dunno why, but it loaded stock firmware on the error screen... don' ask me how...
I have experienced this. Run ODIN, then connect your devices to the computer. When ODIN detect it, unplug and then replug your device. When ODIN back detect it then flash.
Recent versions of Odin work the other way around. First plug then open. Older like <1.87, first you open the program then you plug device. Glad it got solved.
Sent from my HTC One VX using xda premium
I have also hit this screen several times while playing with roms, this is a fairly common example of "softbrick". Fortunately for me, Odin had no problems connecting, and then simply flashed an oem rom. I have not been able to hard brick this thing, which is a huge surprise considering all the flashing I've done. Frankly I'm surprised it hasn't blown up like an iraqi IED yet lol!
This is a good thing! It means that Samsung built in a good failsafe. It just means you hosed your rom install all the way down to the bootloader. Easy to recover from
Glad ya learned to fix it!
Big problems with my Samsung Galaxy Tab 2 10.1
cruise350 said:
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
Click to expand...
Click to collapse
Hi, my problem is identical. I have a samsung galaxy tab 2 10.1 and after a failed update with Odin the message was:Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I try again with Odin and nothing. I used Kies, and nothing. Then i saw a reference to the md5 philz_touch_5.03.7-p5110.tar.md5 and i use it with Odin. Sucess but the message was RESET. Everithing disappeared from screen except the battery logo. The tablet is always on and with that image. The volume buttons and power don't work and it is not detected.
I'm affraid the thing is bad.
Can you help? Thank you.
Djadomor
Hey cruise, would you happen to still have the file you used on your son's box? The only page I can find won't let me in.
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try agai
Hi. I got the problem where I cant use my tab, because it just shows this message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
It happened because I tried rooting my tab in Odin. At first it failed, I tried it a second time and it kind of lagged.. so being my stupid self I disconnected the tab and since then I have this problem.
I tried looking for some resolutions, but half of them either uses Odin:
1. which I really dont know how to use
2. which considers the tab being in download mode. My tab cant even do that.. when I hold the Power+home+volume down buttons, the screen goes black and then the same message comes back.
The second half of resolutions is with Kies. I didnt know about Kies earlier, so it doesnt have my tab details stored there.
I dont know if Kies has to have your tab stored to use the 'Firmware Upgrade and Initialisation' option, but I tried in anyway. When I write in my model, which is SM-T230NU, it shows that the model information I entered cannot be verified.
When I charged my tab a bit and connected to my computer, Kies isnt able to find it. It finds that something is connected, because it shows that it's connecting, but then it stops, then connects, and the same over and over.
Anyways, I have a Samsung galaxy Tab 4 7.0, model SM-T230NU, and I really want to try and repair it on my own before I give it to service.
Please dont hate on my stupidity, because I'm not really into technology..
Hi, thank you for using XDA Assist. You're are going to have to flash the stock firmware in Odin. Go to sammobile.com for the firmware and see this on how to use Odin,http://forum.xda-developers.com/showthread.php?t=1372414. If you can't get into download mode that's going to be a big problem. You can look for help by posting here, http://forum.xda-developers.com/tab-4/help
Thread closed.
my samsung tablet went through a tough time because it had no os and wasnt installing one so i went to odin and downloaded the stock rom then flashed it by odin while my tab was connected in download mode. suddenly the connection got unplugged while installing the new rom leaving me with a black screen. the real issue here is that i cant save my tab because it doesnt get to recovery nor download mode so im basically left with a useless piece of junk. i think there is a way to get it back because my computer recognizes it but odin doesnt. if i could get it to boot into download mode, i can get it back. but i dont know how...
my tab is samsung galaxt tab 3 lite sm t111.
pls help urgent!!!
kimosab said:
my samsung tablet went through a tough time because it had no os and wasnt installing one so i went to odin and downloaded the stock rom then flashed it by odin while my tab was connected in download mode. suddenly the connection got unplugged while installing the new rom leaving me with a black screen. the real issue here is that i cant save my tab because it doesnt get to recovery nor download mode so im basically left with a useless piece of junk. i think there is a way to get it back because my computer recognizes it but odin doesnt. if i could get it to boot into download mode, i can get it back. but i dont know how...
my tab is samsung galaxt tab 3 lite sm t111.
pls help urgent!!!
Click to expand...
Click to collapse
Hello.
Thank you for using XDA Assist.
Please post your questions here:
http://forum.xda-developers.com/galaxy-tab-3/help
That's the specific help forum for your device.
Your device experts are located there.
Good luck!
i tried to root my s5 mini duos G800H, didnt work got my fone bricked i think, does not turn on, i can only go into the recovery modes, vol up and the vol down ones, i have downloaded a few "stock roms" but none have got my fone back into normal, i downloaded a "recovery" used Odin 3.10.7, did all the right things as videos show to do went to AP, hit start, the recovery one gives "PASS" but when i turn it on (REBOOT) it stays at SAMSUNG S5 MINI screen (LOGO). i reboot it into the volume UP and it gives me a "recovery is not seandroid enforcing"... so ok now i tried to download a new "stock ROM" this one here "twrp_kmini3g-31102014-2247" now when i go into volume UP i get a menu "team win recovery project v2.8.1.0"... but still cant get the fone to start what do i do? what am i doing worng, can someone please help me just get the fone back to normal.? 3 days without a cell fone
Modelo: SM-G800H/DS
Also, when i go to sites where there is a list of firmwares to download, there are a few differente contries does it matter witch one i pick? i dont know where my fone is form is there a way to find out?
Well ,
U only need to odin the stock firmware for phone , what ever the country firmware u can try it , lile the BTU firmware there ok
& u can post ur question on ur device forum
http://forum.xda-developers.com/galaxy-s5-mini
Thank you for using XDA Assist ,,