Related
Hi,
Edit/update:
I'm no god at this root and custom rom stuff.. so I got a problem hehe.
I successfully unlocked my bootloader, installed TWRP, tried to instal a ROM. Which doesn't even boot further than the first logo pop-up. So I wanted to install the original software, I downloaded from the Huawei site. But I am unable to install this with TWRP.. when I select the .zip it says "Failed"
I have no idea what I've done to my phone.. I hope someone can help me out.
irnsx said:
Hi there,
I just struggled my way to unlock my bootloader with some tutorials of this forum. Now I'm stuck at the next point, my bootloader has been unlocked successfully, but whenever i try and instal cwm flash it keeps bootlooping at the logo. I'm no pro at this stuff, I hope someone can help me.
I have the MT7-L09 version.
Click to expand...
Click to collapse
Install TWRP. Cwm doesn't work.
Sent from my HUAWEI MT7-L09 using Tapatalk
Pablo87 said:
Install TWRP. Cwm doesn't work.
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
Hi, I tried, doesn't work.. keeps bootlooping at the logo.
UPDATE: I finally got it working somehow I had the wrong version.
irnsx said:
Hi,
Edit/update:
I'm no god at this root and custom rom stuff.. so I got a problem hehe.
I successfully unlocked my bootloader, installed TWRP, tried to instal a ROM. Which doesn't even boot further than the first logo pop-up. So I wanted to install the original software, I downloaded from the Huawei site. But I am unable to install this with TWRP.. when I select the .zip it says "Failed"
I have no idea what I've done to my phone.. I hope someone can help me out.
Click to expand...
Click to collapse
You can not install original Software with a Custom Recovery....do unroot and flash the Stock Recovery und try again...and unzip the Rom and do the update.app into the dload folder on the SD Card
Pablo87 said:
Install TWRP. Cwm doesn't work.
Sent from my HUAWEI MT7-L09 using Tapatalk
Click to expand...
Click to collapse
Skorpi58 said:
You can not install original Software with a Custom Recovery....do unroot and flash the Stock Recovery und try again...and unzip the Rom and do the update.app into the dload folder on the SD Card
Click to expand...
Click to collapse
That sounds legit, I'll try, thank you.
Skorpi58 said:
You can not install original Software with a Custom Recovery....do unroot and flash the Stock Recovery und try again...and unzip the Rom and do the update.app into the dload folder on the SD Card
Click to expand...
Click to collapse
I got stock recovery now, but there are not really many options in there..
"Reboot system now"
"Wipe data/factory reset"
"Wipe cache partition"
I tried the factory reset, with no result..
Update: well now I have the stock recovery and I cannot connect my device and boot adb bootloader anymore... it says there are no devices connected. Please help!!
Update 2: Okay I found something to unbrick, I had to press volume UP+DOWN now it says Huawei software installing, hopefully this will work.
Okay, I installed stock rom, then I installed update found here (http://forum.xda-developers.com/mate-7/general/beta-ascend-mate-7-b513-mt7-l09-t3309727) Now running 6.0, my next question is how do I get TWRP or CWM or any Recovery flashed to my phone, which works. Worked with 5.1, tried those but that is not working and keeps bootlooping. I hope someone can help.
Try this twrp for Android 6.0
https://mega.nz/#!w15xjZxL!0-alMyU4RgsxQ6K6FjOPZna-piQLXODLE0QarKtdVCg
Send from ?
chudy_85 said:
Try this twrp for Android 6.0
https://mega.nz/#!w15xjZxL!0-alMyU4RgsxQ6K6FjOPZna-piQLXODLE0QarKtdVCg
Send from
Click to expand...
Click to collapse
Sweet, that was just what I needed.
Hello! Is there a way to root my Allview P7 Pro? I haven't found any app/software to root it. It would be nice if someone knows how to root it. If someone need info about the phone I can write it down later. Thanks in advice
TWRP 3.0.3 for Allview P7 Pro
TWRP 3.0.3 for Allview P7 Pro (mt6737t)
Based on Android 6.0 firmware ver.P7_PRO / Fri Sep 9 08:34:39 CST 2016
jemmini said:
TWRP 3.0.3 for Allview P7 Pro (mt6737t)
Based on Android 6.0 firmware ver.P7_PRO / Fri Sep 9 08:34:39 CST 2016
Click to expand...
Click to collapse
Is this working?
GalaxyRSR said:
Is this working?
Click to expand...
Click to collapse
yes
jemmini said:
yes
Click to expand...
Click to collapse
I'll try it Thank you so much
Um...I moved it to my phone..but I cant find the files in recovery..
jemmini said:
yes
Click to expand...
Click to collapse
moved to sd card..but I cant install it..it says installation aborted :c
GalaxyRSR said:
Hello! Is there a way to root my Allview P7 Pro? I haven't found any app/software to root it. It would be nice if someone knows how to root it. If someone need info about the phone I can write it down later. Thanks in advice
Click to expand...
Click to collapse
Hi.
If someone want to root this phone Allview P7 Pro you can do it by flashing TWRP and then SuperSU.
Here is the link for TWRP: https://drive.google.com/file/d/0B3-CwjCz7AuhdmRCR01TcHZvWkU/view?usp=drivesdk
You need to flash this with Sp flash tool http://spflashtool.com then from TWRP install Super Su https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133 and reboot.
I've rooted mine.
Good luck.
Thanks. Can I link this post in another forum? Cuz some other ppl would like to root their devices too..
GalaxyRSR said:
Thanks. Can I link this post in another forum? Cuz some other ppl would like to root their devices too..
Click to expand...
Click to collapse
Yes
Help
Can someone help me root my P7 PRO step by step? I really want to get rid to bloatware
Naicht said:
Can someone help me root my P7 PRO step by step? I really want to get rid to bloatware
Click to expand...
Click to collapse
First of all. The download the required files.
- TWRP Recovery
-Super SU
-SP Flash Tool
1) On your PC open up the Flash Tool, on the scatter select the file you have downloaded before.
(Before you proceed make sure you have enabled the Developer options by going to Settings -> About Phone -> And click the Build number until you see a little box saying that "You are now a developer". Now go back and head to advanced settings and go all the way down, where you'll see the Developer Options, go in, look for USB Debugging and turn it on.)
2)Move the Super SU zip file to your phone or SD card.
3) Now turn off your phone, click Download and connect your phone via USB cable and the process should start. A window should pop up saying Download Complete, and click OK.
4)Now disconnect your phone, press the Volume up button then the Power button until the screen lights up, then release it. The recovery should start up.
5)Now click Install and navigate to the file. The install and the interface is pretty simple so you won't have problems during it. After the installation is completed, click Reboot System and wait until the phone start up. Done!
Pls tell us if you don't understand something. (Sorry if I made a grammar mistake, but English is not my main language)
GOOD LUCK!
Nice!!!
jemmini said:
TWRP 3.0.3 for Allview P7 Pro (mt6737t)
Based on Android 6.0 firmware ver.P7_PRO / Fri Sep 9 08:34:39 CST 2016
Click to expand...
Click to collapse
ROOTED!
Many thanks my friend!
Easy peasy root method... now, let's go further, I'm mean, peoples who know what should be done, DEV people like...
Thank YOU again!!!
Klaus
I tried this twice and went with my phone to warranty 2 times. Cand someobe please tell me what have i done wrong? After installing TWRP OS stopped to boot (TWRP was working). I installed SuperSu and then the phone bricked. After some trying to restore it i ended up with the OS wiped....then i went to warranty. Is it because i installed Twrp with fastboot, i mean do i really need flash tool? Thanks in advance :3
Sketch RPG2 said:
I tried this twice and went with my phone to warranty 2 times. Cand someobe please tell me what have i done wrong? After installing TWRP OS stopped to boot (TWRP was working). I installed SuperSu and then the phone bricked. After some trying to restore it i ended up with the OS wiped....then i went to warranty. Is it because i installed Twrp with fastboot, i mean do i really need flash tool? Thanks in advance :3
Click to expand...
Click to collapse
I think it's time to try with flash tool.
panda822 said:
I think it's time to try with flash tool.
Click to expand...
Click to collapse
I FINALLY GOT IT WORKING!!!!
For those who think that their phone got bricked, listen 'ere.
After i installed TWRP phone stopped booting, it got in bootloop (i was able to get in recovery)
If this happens to you to, just install SuperSU (the exact version that is on the first page, first reply), it installs another boot image that will work. Your phone should boot properly now ( it might take up to 5 minutes to first boot, it happend to me, i got worried but it was alright).
Thank you so much, now i can finally do WHATEVER I WANT with my phone.
Hey. Is there a way to unroot the phone? I've tried to do it by unrooting within the SuperSU app but without succes.
GalaxyRSR said:
Hey. Is there a way to unroot the phone? I've tried to do it by unrooting within the SuperSU app but without succes.
Click to expand...
Click to collapse
Flash back the stock ROM
I don't have the stock ROM. Only the stock recovery..
GalaxyRSR said:
I don't have the stock ROM. Only the stock recovery..
Click to expand...
Click to collapse
https://firmwarefile.com/gionee-p7
Hi guys I have TWRP insalled and it works fine but when I boot it shows the huawie logo and nth happens for hours I downloaded the UPDATE.ZIP the B560 of android 7 (https://www.obeygeek.com/download-h...oid-7-0-nougat-b560-firmware-update-official/) which was my android version before this happens I dont even know if I have an os on my phone now I tried to install UPDATE.ZIP via TWRP install ZIP functions and I got error 7 and failed so I extracted UPDATE.ZIP to use UPDATE.APP in dload folder on my sd card then I put it in pressed volume +- and power button so it got into update page but gave an error that its not compitable with current :/ I dont know what to do I thought it might be the TWRP problem so if i change it to stock version it'll be possible to update dload method but then Im afraid to lose TWRP and then every thing I am a noob in ROM Things please help me out.
Update:
I just got my build number is NXT-L29C185B200
but I downloaded and put in dload NXT-L29C432B560
Can it be the only problem why B200 when I asked support they said nth i was running B560 before this happens)
Kmthrongl said:
Hi guys I have TWRP insalled and it works fine but when I boot it shows the huawie logo and nth happens for hours I downloaded the UPDATE.ZIP the B560 of android 7 (https://www.obeygeek.com/download-h...oid-7-0-nougat-b560-firmware-update-official/) which was my android version before this happens I dont even know if I have an os on my phone now I tried to install UPDATE.ZIP via TWRP install ZIP functions and I got error 7 and failed so I extracted UPDATE.ZIP to use UPDATE.APP in dload folder on my sd card then I put it in pressed volume +- and power button so it got into update page but gave an error that its not compitable with current :/ I dont know what to do I thought it might be the TWRP problem so if i change it to stock version it'll be possible to update dload method but then Im afraid to lose TWRP and then every thing I am a noob in ROM Things please help me out.
Update:
I just got my build number is NXT-L29C185B200
but I downloaded and put in dload NXT-L29C432B560
Can it be the only problem why B200 when I asked support they said nth i was running B560 before this happens)
Click to expand...
Click to collapse
What TWRP did you use?
Kmthrongl said:
Hi guys I have TWRP insalled and it works fine but when I boot it shows the huawie logo and nth happens for hours I downloaded the UPDATE.ZIP the B560 of android 7 (https://www.obeygeek.com/download-h...id-7-0-nougat-b560-firmware-update-official/) which was my android version before this happens I dont even know if I have an os on my phone now I tried to install UPDATE.ZIP via TWRP install ZIP functions and I got error 7 and failed so I extracted UPDATE.ZIP to use UPDATE.APP in dload folder on my sd card then I put it in pressed volume +- and power button so it got into update page but gave an error that its not compitable with current :/ I dont know what to do I thought it might be the TWRP problem so if i change it to stock version it'll be possible to update dload method but then Im afraid to lose TWRP and then every thing I am a noob in ROM Things please help me out.
Update:
I just got my build number is NXT-L29C185B200
but I downloaded and put in dload NXT-L29C432B560
Can it be the only problem why B200 when I asked support they said nth i was running B560 before this happens)
Click to expand...
Click to collapse
We're you on marshmallow then updated to nougat or already on nougat ?
Hi I was already on nougat.
and TWRP 3.1.0-0 I
I really need instant help I need my phone would you help me on a chat or sth like:
http://webchat.freenode.net/?channels=xda-rc
Kmthrongl said:
Hi I was already on nougat.
and TWRP 3.1.0-0 I
Click to expand...
Click to collapse
Where have you got this TWRP? Maybe, it was wrong. It's for it that I ask it.
You make the dload method
When the dload method is finished, you make the factory reset with the erecovery
Reboot
If it reboot fine, after you'll install the TWRP if you want it.
franzyroy said:
Where have you got this TWRP? Maybe, it was wrong. It's for it that I ask it.
You make the dload method
When the dload method is finished, you make the factory reset with the erecovery
Reboot
If it reboot fine, after you'll install the TWRP if you want it.
Click to expand...
Click to collapse
Ok I got it from a post rooting andoird 7 I think you gave me the link yourself and I rooted with no problem
from here:
https://forum.xda-developers.com/mate-8/general/guide-root-nougat-mate-8-phh-superuser-t3570898
Is it imprtant which Bilud to install in dload?
I got one b560 for l29c185 but it's not offical would you please give me a valid link?
Kmthrongl said:
from here:
https://forum.xda-developers.com/mate-8/general/guide-root-nougat-mate-8-phh-superuser-t3570898
Click to expand...
Click to collapse
OK, no issue with it.
---------- Post added at 07:56 AM ---------- Previous post was at 07:55 AM ----------
Kmthrongl said:
Is it imprtant which Bilud to install in dload?
Click to expand...
Click to collapse
Yes but you have chosen the good.
---------- Post added at 07:57 AM ---------- Previous post was at 07:56 AM ----------
Kmthrongl said:
I got one b560 for l29c185 but it's not offical would you please give me a valid link?
Click to expand...
Click to collapse
Anyways, if you tried to root your phone, then it worked, right?
I did it tnx for your help
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c185b560-official-t3556789
now my sd card slot is working again tnx xda tnx franzyroy
Kmthrongl said:
I did it tnx for your help
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c185b560-official-t3556789
now my sd card slot is working again tnx xda tnx franzyroy
Click to expand...
Click to collapse
Hi everyone,
I would like to ask the Honor 8 community how to rollback from LineageOS back to EMUI. Indeed, i was surprised by the camera problems, accompanied by the lack of tethering, and these two problems are dealbreakers for me.
Basically, i would like to know how can i revert back to EMUI once on LineageOS/RROS/AOSPA. I believe it is the same procedure for all custom ROMs (more or less), and that asking this question might help others too
Thank you for your support.
Couple days ago i've done it this way.
1. Download rollback package and full package from honor website ( dont double my mistake, it MUST be package for your country/region).
2. Unzip rollback package and put dload folder with UPADTE.app inside ur sd card. Flash it buy pressing vol up + vol down + power buttons and dont release it till the operation begin.
3. Then do the same with full package. Dont double dload folders.
4. If Ur phone cant boot, Press vol up + power buttons. Factory reset + clear cache. Restart.
Now ur phone should boot and u can download EMUI 5.0 OTA update if u want. Ur phone bootloader is locked and u have no root aswell.
quetiser said:
Now ur phone should boot and u can download EMUI 5.0 OTA update if u want. Ur phone bootloader is locked and u have no root aswell.
Click to expand...
Click to collapse
Thank you for the instructions, but are you saying that the bootloader will relock after flashing back to stock ? And if so, can I use the same unlock code?
denism81 said:
Thank you for the instructions, but are you saying that the bootloader will relock after flashing back to stock ? And if so, can I use the same unlock code?
Click to expand...
Click to collapse
Yup, I think so. Yesterday i boot my phone to bootloader by ADB and it was locked (no annoying message at boot anymore). And about the code, i'm pretty sure it is one code for one IMEI number so you will be able to unlock it with the same one.
Read more from link belove.
https://club.hihonor.com/in/techsup...o-emui-from-custom-roms-like-cyanogenmod.1829
quetiser said:
Couple days ago i've done it this way.
1. Download rollback package and full package from honor website ( dont double my mistake, it MUST be package for your country/region).
2. Unzip rollback package and put dload folder with UPADTE.app inside ur sd card. Flash it buy pressing vol up + vol down + power buttons and dont release it till the operation begin.
3. Then do the same with full package. Dont double dload folders.
4. If Ur phone cant boot, Press vol up + power buttons. Factory reset + clear cache. Restart.
Now ur phone should boot and u can download EMUI 5.0 OTA update if u want. Ur phone bootloader is locked and u have no root aswell.
Click to expand...
Click to collapse
I cannot find update.app on the EMUI website. Please could I have a link or something?
Second point, u will get UPDATE.app when you unzip package
LineageOS is good or not? Just a little question
BnK1986 said:
LineageOS is good or not? Just a little question
Click to expand...
Click to collapse
LineageOS is great, no questions asked, but not currently because of the current deal-breaking bugs. I'm talking about Tethering not working, no dual-lens support (on all ROMs currently, but subject to change), and very little IR support.
Check out my comprehensive list of bugs if you want the full picture. Plus, it might help you choose your OS
https://forum.xda-developers.com/honor-8/how-to/aosp-comprehensive-list-bugs-aosp-roms-t3619313
denism81 said:
Thank you for the instructions, but are you saying that the bootloader will relock after flashing back to stock ? And if so, can I use the same unlock code?
Click to expand...
Click to collapse
Bootloader will relock if u revert back to MM just beacuse lot of things got changed in emui5 .
Even if u unlock bootloader on MM and try to update to nougat , it will relock bootloader again .
So keep ur unlock code safe
gopinaidu77 said:
Bootloader will relock if u revert back to MM just beacuse lot of things got changed in emui5 .
Even if u unlock bootloader on MM and try to update to nougat , it will relock bootloader again .
So keep ur unlock code safe
Click to expand...
Click to collapse
Good to know, thanks!! I tried to roll back last night for several hours but I failed...
denism81 said:
Good to know, thanks!! I tried to roll back last night for several hours but I failed...
Click to expand...
Click to collapse
I can help u
gopinaidu77 said:
I can help u
Click to expand...
Click to collapse
That would be great! I'm using L04/ and I came from the lastest update..
Everything was running just fine until I switched from aospa to lastest RR Rom and I must have messed something up and got stuck in a boot loop. After a while I got things up and running except now my reception is terrible. And of course I accidentally formatted my sdcard and lost my backup.
Rumor has it if I rollback to stock I can fix my reception problem.
denism81 said:
That would be great! I'm using L04/ and I came from the lastest update..
Everything was running just fine until I switched from aospa to lastest RR Rom and I must have messed something up and got stuck in a boot loop. After a while I got things up and running except now my reception is terrible. And of course I accidentally formatted my sdcard and lost my backup.
Rumor has it if I rollback to stock I can fix my reception problem.
Click to expand...
Click to collapse
Do u have a roll back package?
gopinaidu77 said:
Do u have a roll back package?
Click to expand...
Click to collapse
Yes, but nothing happens. It's brings me to a screen that says it's installing which happens quickly and than it reboots to another similar screen and says resetting user preferences (something like that) and than it brings me back to a fresh new setup screen of the custom ROM.
denism81 said:
Yes, but nothing happens. It's brings me to a screen that says it's installing which happens quickly and than it reboots to another similar screen and says resetting user preferences (something like that) and than it brings me back to a fresh new setup screen of the custom ROM.
Click to expand...
Click to collapse
Well sounds good and every thing gone fine.
Now its time to install the full update.app of MM firmware
gopinaidu77 said:
Well sounds good and every thing gone fine.
Now its time to install the full update.app of MM firmware
Click to expand...
Click to collapse
I'm not really sure how to obtain that part of the update... I did get the rollback version which I thought would get me a new update.app but it didn't...
denism81 said:
I'm not really sure how to obtain that part of the update... I did get the rollback version which I thought would get me a new update.app but it didn't...
Click to expand...
Click to collapse
Bro u are completely wrong , can i know ur device model ?
gopinaidu77 said:
Bro u are completely wrong , can i know ur device model ?
Click to expand...
Click to collapse
L04:cyclops:
denism81 said:
L04:cyclops:
Click to expand...
Click to collapse
First install this package .
http://www.hihonor.com/us/support/details/index.html?DOC_ID=92098
Extract the Zip
Goto sdcard/dload and place the update.app in dload folder .
Power off the phone and click volume up + vol down + power and then done . It will install the rollback package .
Now download and extract this package.
http://www.hihonor.com/us/support/details/index.html?DOC_ID=89264
Extract update.app from the package and put it in sdcard/dload.
Install it and done u had rolled back to marshmallow
gopinaidu77 said:
First install this package .
http://www.hihonor.com/us/support/details/index.html?DOC_ID=92098
Extract the Zip
Goto sdcard/dload and place the update.app in dload folder .
Power off the phone and click volume up + vol down + power and then done . It will install the rollback package .
Now download and extract this package.
http://www.hihonor.com/us/support/details/index.html?DOC_ID=89264
Extract update.app from the package and put it in sdcard/dload.
Install it and done u had rolled back to marshmallow
Click to expand...
Click to collapse
Alright man, that's amazing!!! I'll let you know later on this evening how it turns out.. I'm busy with family for a while today. I really appreciate all your help!!!
help!! i accidentaly wiped system in twrp (honor8-frdl09 euro) what do i do ?? erecovery dosnt work (solved)
yunh said:
title
Click to expand...
Click to collapse
Next time, put your problem in the actual post and not in the title. Now onto your problem, what were you trying to do? You can't just "accidentally" wipe the system.
itisiryan said:
Next time, put your problem in the actual post and not in the title. Now onto your problem, what were you trying to do? You can't just "accidentally" wipe the system.
Click to expand...
Click to collapse
i was trying to format but i deleted the os by mistake how do i bring it back erecovery dosn't work
yunh said:
i was trying to format but i deleted the os by mistake how do i bring it back erecovery dosn't work
Click to expand...
Click to collapse
What firmware was your phone on, did you have an update ready to install?
yunh said:
i was trying to format but i deleted the os by mistake how do i bring it back erecovery dosn't work
Click to expand...
Click to collapse
Download a full firmwaremfor your device. Put it in dload folder inside SD card. Then press volume down, volume up and power button until it lights up. Flashing will start.
sonicscrewup said:
What firmware was your phone on, did you have an update ready to install?
Click to expand...
Click to collapse
yes i had i think it was something b389
itisiryan said:
Download a full firmwaremfor your device. Put it in dload folder inside SD card. Then press volume down, volume up and power button until it lights up. Flashing will start.
Click to expand...
Click to collapse
do you have a link to the frimware i need my phone is a euro model i orderd from amazon germany
yunh said:
do you have a link to the frimware i need my phone is a euro model i orderd from amazon germany
Click to expand...
Click to collapse
What is your cust version? Do you remember?
itisiryan said:
What is your cust version? Do you remember?
Click to expand...
Click to collapse
no can you flash a new one?
sonicscrewup said:
What firmware was your phone on, did you have an update ready to install?
Click to expand...
Click to collapse
Okay, I might be able to help. If you can get into twrp you need to do that now and see if you can find the update package, you'll be attempting to extract the recovery from there.
If you cant get into twrp, plug into the computer, place the rollback package into a dload folder on the root of an sd card and try the three finger update.
Installing twrp screws with regular erecovery and i've gotten back from this exact situation, I'll do my best to walk you through what you need to do.
itisiryan said:
Download a full firmwaremfor your device. Put it in dload folder inside SD card. Then press volume down, volume up and power button until it lights up. Flashing will start.
Click to expand...
Click to collapse
i still have an unlocked bootloader if i install twrp and flash ressurection remix rom will it work?
yunh said:
i still have an unlocked bootloader if i install twrp and flash ressurection remix rom will it work?
Click to expand...
Click to collapse
It should work too.
sonicscrewup said:
Okay, I might be able to help. If you can get into twrp you need to do that now and see if you can find the update package, you'll be attempting to extract the recovery from there.
If you cant get into twrp, plug into the computer, place the rollback package into a dload folder on the root of an sd card and try the three finger update.
Installing twrp screws with regular erecovery and i've gotten back from this exact situation, I'll do my best to walk you through what you need to do.
Click to expand...
Click to collapse
i can get into twrp 3.0.3-0 but not 3.1
That's fine, start going through your file system and see if you can find the update package or if you have a twrp backup that's the easiest way to go
sonicscrewup said:
Okay, I might be able to help. If you can get into twrp you need to do that now and see if you can find the update package, you'll be attempting to extract the recovery from there.
If you cant get into twrp, plug into the computer, place the rollback package into a dload folder on the root of an sd card and try the three finger update.
Installing twrp screws with regular erecovery and i've gotten back from this exact situation, I'll do my best to walk you through what you need to do.
Click to expand...
Click to collapse
i dont mind a custom rom but when i try to install RR 5.8.4 i get a black screen and 5.8.3 gives me error 7
Maybe try lineage os? That's what I'm on currently
sonicscrewup said:
Okay, I might be able to help. If you can get into twrp you need to do that now and see if you can find the update package, you'll be attempting to extract the recovery from there.
If you cant get into twrp, plug into the computer, place the rollback package into a dload folder on the root of an sd card and try the three finger update.
Installing twrp screws with regular erecovery and i've gotten back from this exact situation, I'll do my best to walk you through what you need to do.
Click to expand...
Click to collapse
sonicscrewup said:
Maybe try lineage os? That's what I'm on currently
Click to expand...
Click to collapse
does the camera work?
sonicscrewup said:
Okay, I might be able to help. If you can get into twrp you need to do that now and see if you can find the update package, you'll be attempting to extract the recovery from there.
If you cant get into twrp, plug into the computer, place the rollback package into a dload folder on the root of an sd card and try the three finger update.
Installing twrp screws with regular erecovery and i've gotten back from this exact situation, I'll do my best to walk you through what you need to do.
Click to expand...
Click to collapse
sonicscrewup said:
Maybe try lineage os? That's what I'm on currently
Click to expand...
Click to collapse
is there any way to go back to emui 5?
sonicscrewup said:
Okay, I might be able to help. If you can get into twrp you need to do that now and see if you can find the update package, you'll be attempting to extract the recovery from there.
If you cant get into twrp, plug into the computer, place the rollback package into a dload folder on the root of an sd card and try the three finger update.
Installing twrp screws with regular erecovery and i've gotten back from this exact situation, I'll do my best to walk you through what you need to do.
Click to expand...
Click to collapse
sonicscrewup said:
Maybe try lineage os? That's what I'm on currently
Click to expand...
Click to collapse
is there any way to go back to emui 5?
yunh said:
is there any way to go back to emui 5?
Click to expand...
Click to collapse
No dual camera support as far as I know,but the color one works. And yes, by flashing the regular recovery and doing the three finger update