I tried to install cm12.1 through fastboot flashing. By mistake, i flashed a wrong package. Now the phone is hardbricked. Computer is detecting the device as Qualcomm HS-USB QDLoader 9008. I've seen a guide to debrick YUREKA with QFIL ( http://forum.xda-developers.com/yureka/help/reviving-hard-bricked-yu-yureka-t3154577 ). I think I can do the same on my phone. But I need this bootloader recovery package(I think it is... ) for flashing. How can I get these files?Can anyone help me to debrick my phone? Is there any alternate solution for this?
anandvgeorge said:
I tried to install cm12.1 through fastboot flashing. By mistake, i flashed a wrong package. Now the phone is hardbricked. Computer is detecting the device as Qualcomm HS-USB QDLoader 9008. I've seen a guide to debrick YUREKA with QFIL ( http://forum.xda-developers.com/yureka/help/reviving-hard-bricked-yu-yureka-t3154577 ). I think I can do the same on my phone. But I need this bootloader recovery package(I think it is... ) for flashing. How can I get these files?Can anyone help me to debrick my phone? Is there any alternate solution for this?
Click to expand...
Click to collapse
May this will help you.
Ess Arr said:
May this will help you.
Click to expand...
Click to collapse
My phone has got hardbricked . I can't boot into fastboot mode. I've seen a method to recover YUREKA from hardbrick on http://forum.xda-developers.com/yureka/help/reviving-hard-bricked-yu-yureka-t3154577. Can we do the same on YUPHORIA??
Did you try this?
anandvgeorge said:
My phone has got hardbricked . I can't boot into fastboot mode. I've seen a method to recover YUREKA from hardbrick on http://forum.xda-developers.com/yureka/help/reviving-hard-bricked-yu-yureka-t3154577. Can we do the same on YUPHORIA??
Click to expand...
Click to collapse
Hi,
Please share if you were able to recover your mobile.
puriadeb said:
Hi,
Please share if you were able to recover your mobile.
Click to expand...
Click to collapse
I couldn't. I got the phone replaced. Later I found some methods to revive back the phone from this condition on the internet.
Related
does any one know a detailed methord to unbrick... a Hard bricked device....
it got hard Bricked while flashing stock miui....
I can not get into fastboot mode...
Hard Bricked.....
your device have a red blinking LED?
can your computer / laptop detect your phone?
if yes
do a fastboot again... , or do it 1 by 1
"Fastboot flash system system.img" and so on
We can't kill qualcomm devices...They can be saved from any stage...Use Qfil to flash(if fastboot mode is not working)...
mi 4i does not boot up
My mi 4i does not boot up does not going to fast boot when i connect it to pc no charging symbol bt pc showd usb device doesnot recognise code 43
Install mi4i Qualcomm drivers and flash using latest miflash tool.
Flash tool will recognize the device as com 10 or com 30 or something like that
Sharath007 said:
We can't kill qualcomm devices...They can be saved from any stage...Use Qfil to flash(if fastboot mode is not working)...
Click to expand...
Click to collapse
hello
I have a bricked Mi4i I am trying to restore, can u help me with the steps required to use Qfil; as in what files to download and stuff like that? I downloaded the QFIL, installed the drivers( my phone shows up in Device Manage>Port>Qualcomm HS-USB Diagnostics 9006)
Thank you for your help.
faizauthar12 said:
your device have a red blinking LED?
can your computer / laptop detect your phone?
if yes
do a fastboot again... , or do it 1 by 1
"Fastboot flash system system.img" and so on
Click to expand...
Click to collapse
Hello @faizauthar12.
Can you help me with the steps required to unbrick a hardbricked Mi4i?
The phone had the red led blinking and no mi logo, no recovery and no fastboot.
it is recognized by my pc as Qualcomm HS-USB Diagnostics 9006.
and when I connect to the PC, it shows 4 drives that says it needs to be formatted.
Any help is appreciated. Thank you very much.
Regards
Regan
faizauthar12 said:
your device have a red blinking LED?
can your computer / laptop detect your phone?
if yes
do a fastboot again... , or do it 1 by 1
"Fastboot flash system system.img" and so on
Click to expand...
Click to collapse
Hello @faizauthar12.
Can you help me with the steps required to unbrick a hardbricked Mi4i?
The phone had the red led blinking and no mi logo, no recovery and no fastboot.
it is recognized by my pc as Qualcomm HS-USB Diagnostics 9006.
and when I connect to the PC, it shows 4 drives that says it needs to be formatted.
Any help is appreciated. Thank you very much.
Regards
Regan
reganEZ said:
Hello @faizauthar12.
Can you help me with the steps required to unbrick a hardbricked Mi4i?
The phone had the red led blinking and no mi logo, no recovery and no fastboot.
it is recognized by my pc as Qualcomm HS-USB Diagnostics 9006.
and when I connect to the PC, it shows 4 drives that says it needs to be formatted.
Any help is appreciated. Thank you very much.
Regards
Regan
Click to expand...
Click to collapse
flash your phone with fastboot ROM by usign Xiaomi Mi flash tools
reganEZ said:
Hello @faizauthar12.
Can you help me with the steps required to unbrick a hardbricked Mi4i?
The phone had the red led blinking and no mi logo, no recovery and no fastboot.
it is recognized by my pc as Qualcomm HS-USB Diagnostics 9006.
and when I connect to the PC, it shows 4 drives that says it needs to be formatted.
Any help is appreciated. Thank you very much.
Regards
Regan
Click to expand...
Click to collapse
Happened for me once. Refer this
http://en.miui.com/forum.php?mod=viewthread&tid=474376&mobile=2
You can find videos on QPST in YouTube.
faizauthar12 said:
flash your phone with fastboot ROM by usign Xiaomi Mi flash tools
Click to expand...
Click to collapse
When i try that, the phone is detected as 12345...and then the status bar reaches 100% but nothing else happens. How long does it take for it to flash? any particular miflash tools version or ROM versions?
Thank you
---------- Post added at 12:39 PM ---------- Previous post was at 11:53 AM ----------
Sharath007 said:
Happened for me once. Refer this
http://en.miui.com/forum.php?mod=viewthread&tid=474376&mobile=2
You can find videos on QPST in YouTube.
Click to expand...
Click to collapse
When i try the QFIL method, it says "cant switch to EDL mode or something"
Any help?
Thanks in advance
here is the screenshot btw
reganEZ said:
here is the screenshot btw
Click to expand...
Click to collapse
Seems like you are flashing Android lollipop. Have you tried flashing miui 8 or 9 on Android M using miflash.
Also use old miflash tool, to avoid any compatibility issues.
Sharath007 said:
Seems like you are flashing Android lollipop. Have you tried flashing miui 8 or 9 on Android M using miflash.
Also use old miflash tool, to avoid any compatibility issues.
Click to expand...
Click to collapse
Ok I will try that too. When u say old miflash which version wud u recommend?
reganEZ said:
Ok I will try that too. When u say old miflash which version wud u recommend?
Click to expand...
Click to collapse
Miui 8 or 9 fastboot rom contains repair scripts as well. When you flash them, it should solve issues if any.
Use any of 2015 year releases like
MiFlash 2015.06.01.0
Load all files properly and also use flash all while flashing. It should work.
Sharath007 said:
Miui 8 or 9 fastboot rom contains repair scripts as well. When you flash them, it should solve issues if any.
Use any of 2015 year releases like
MiFlash 2015.06.01.0
Load all files properly and also use flash all while flashing. It should work.
Click to expand...
Click to collapse
I tried this too. it takes about 114 seconds and says operation completed successfully but the phone wont still boot up
reganEZ said:
I tried this too. it takes about 114 seconds and says operation completed successfully but the phone wont still boot up
Click to expand...
Click to collapse
For final attempts ...
1.Use different usb cable and try or other desktop.
2. Connect phone by press and holding vol up and vol down and power buttons , wait until you hear sound and then flash . If no use, try different combinations like holding volume up alone
3. Use QPST method for flashing(this is how i unbricked my mobile after flashing wrong bootloader)
Try flashing MIUI fastboot ROM using "command prompt", instead of Mi flastool, you can find the procedure of it on miui forum..
Hi, I have a problem with my fp2:
It seems that I flashed a corrupted emmc_appsboot file. Afterwards my phone didn't started again. The Fairphone-Logo-Screen doesn't appear and I can't boot into Fastboot-Mode or TWRP :crying:
Maybe there will have somebody what I can do. Please help me...
on a windows pc my device is shown as 'Marshall London HS-USB Diagnostics 9006 mode'
It-was-me said:
emmc_appsboot
Click to expand...
Click to collapse
I don't actually know what an emmc_appsboot is or how one would flash it ... but if you can't get into fastboot mode anymore ... maybe fairphone themselves can help?
Help me. pls . i cant boot to fastboot
Lingg said:
Help me. pls . i cant boot to fastboot
Click to expand...
Click to collapse
If you have TWRP then you are saved otherwise you need to visit service centre.
Lingg said:
Help me. pls . i cant boot to fastboot
Click to expand...
Click to collapse
Search internet how to enter edl mode to flash ROM with Qfil
People are willing to help, but no response from the post creator. Many others might be in the same situation waiting for a solution. Come on.
I've bricked my device countless times but it only disabled booting to system and recovery for me. Fastboot always kept usable for me no matter how badly I messed up anything. Then I could flash twrp and vbmeta through fastboot.bat solution on PC and finally a working ROM from TWRP. What did you do? Please write about your situation in detail so I might try to come up with a solution. I'm also a realme Q user.
jijojamie said:
People are willing to help, but no response from the post creator. Many others might be in the same situation waiting for a solution. Come on.
Click to expand...
Click to collapse
You need to open your phone and "short" the board using a paperclip or tweezers
Install Qualcomm Snapdragon drivers on pc
When you connect your phone it will appear as Qualcomm 9008 in device manager of windows
Download Qfil flashing program from Qualcomm..install it. ..run it ..it will detect your phone
Flash stock fastboot rom to device using QFIL
nobody can do all the work for you
Google :
-Testpoint realme
-Qfil Qualcomm
-Qualcomm 9008 drivers
- fastboot stock ROM realme
-emmc firehose programmers files realme
KevMetal said:
You need to open your phone and "short" the board using a paperclip or tweezers
Install Qualcomm Snapdragon drivers on pc
When you connect your phone it will appear as Qualcomm 9008 in device manager of windows
Download Qfil flashing program from Qualcomm..install it. ..run it ..it will detect your phone
Flash stock fastboot rom to device using QFIL
nobody can do all the work for you
Google :
-Testpoint realme
-Qfil Qualcomm
-Qualcomm 9008 drivers
- fastboot stock ROM realme
-emmc firehose programmers files realme
Click to expand...
Click to collapse
Ohhh god, that's so advanced stuff.
Msg misunderstood...
I just said there maybe others in the same situation, not me. I won't dare to open my phone and do those stuff because i have messed many in the past. I am on stock rom and very happy..
I was just concerned about the person who posted this thread. Sorry if you misunderstood my msg.
I upgraded to realme ui 1.0, and then formatted data. The result is the same as you. Finally, I can only change the motherboard
gigdn said:
I upgraded to realme ui 1.0, and then formatted data. The result is the same as you. Finally, I can only change the motherboard
Click to expand...
Click to collapse
If you are on RUI 1.0, you will have fastboot and stock recovery access. You can download latest UI and install it via stock recovery. Why change MB?
KevMetal said:
You need to open your phone and "short" the board using a paperclip or tweezers
Install Qualcomm Snapdragon drivers on pc
When you connect your phone it will appear as Qualcomm 9008 in device manager of windows
Download Qfil flashing program from Qualcomm..install it. ..run it ..it will detect your phone
Flash stock fastboot rom to device using QFIL
nobody can do all the work for you
Google :
-Testpoint realme
-Qfil Qualcomm
-Qualcomm 9008 drivers
- fastboot stock ROM realme
-emmc firehose programmers files realme
Click to expand...
Click to collapse
I am not able to get emmc firehose file for realme x2 pro.. still searching for that. can you suggest me where to get?
i need OP8 in2019 verizon flash file i flash global rom but want to back verizon
BL also unlocked so is there fastboot rom etc?
[OP8][OOS VZW 67CD] Unbrick tool to restore your device to OxygenOS
My phone shows up as IN2019, I don't see where it would be QDLOADER 9008 or QHUSB_BULK. I can't get into EDL. What should I try next? I tried fastboo and ABD nothing gets it into edl
forum.xda-developers.com
FoxyDrew said:
[OP8][OOS VZW 67CD] Unbrick tool to restore your device to OxygenOS
My phone shows up as IN2019, I don't see where it would be QDLOADER 9008 or QHUSB_BULK. I can't get into EDL. What should I try next? I tried fastboo and ABD nothing gets it into edl
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks alot bro I'll try it tomorrow
FoxyDrew said:
[OP8][OOS VZW 67CD] Unbrick tool to restore your device to OxygenOS
My phone shows up as IN2019, I don't see where it would be QDLOADER 9008 or QHUSB_BULK. I can't get into EDL. What should I try next? I tried fastboo and ABD nothing gets it into edl
forum.xda-developers.com
Click to expand...
Click to collapse
Bro is there any fastboot rom for this?
Mr Hassan said:
Bro is there any fastboot rom for this?
Click to expand...
Click to collapse
No, I promise MSM will work, you just need to figure out the drivers.
FoxyDrew said:
No, I promise MSM will work, you just need to figure out the drivers.
Click to expand...
Click to collapse
The problem is not in your file problem is in my device i was flashed another file or param now when i try ti flash it its giving param mismatch etc error
Even i flash vzw param via FB then i get smt error and still not able to flash
I have only way now is FB rom to fix it
FoxyDrew said:
No, I promise MSM will work, you just need to figure out the drivers.
Click to expand...
Click to collapse
Why i want to back vzw? Coz my device is no service issue i need to back stock rom then need to check is it in network lock or what
Hi,
I have a RMX 3370 and it is on EDL mode after i've hard-brick it.
Is there a solution to flash firmware file (.OFP) using a tool?
the pc read the device "Qualcomn HS-USB QDLoader 9006 (COM3)", for this i understood that the device is in EDL mode...
Thx to all support!
I flashed with this, https://forum.xda-developers.com/attachments/gt-rar.5718487/
make sure ofp the same version.
eimantasxd said:
I flashed with this, https://forum.xda-developers.com/attachments/gt-rar.5718487/
make sure ofp the same version.
Click to expand...
Click to collapse
sorry it says: no device detected, i can't flash on fastboot mode
(NO USB DEVICE CONNECTED)
Have you tried whit QFil programm?