Question REALME EDL - Realme GT Neo 2

Hi,
I have a RMX 3370 and it is on EDL mode after i've hard-brick it.
Is there a solution to flash firmware file (.OFP) using a tool?
the pc read the device "Qualcomn HS-USB QDLoader 9006 (COM3)", for this i understood that the device is in EDL mode...
Thx to all support!

I flashed with this, https://forum.xda-developers.com/attachments/gt-rar.5718487/
make sure ofp the same version.

eimantasxd said:
I flashed with this, https://forum.xda-developers.com/attachments/gt-rar.5718487/
make sure ofp the same version.
Click to expand...
Click to collapse
sorry it says: no device detected, i can't flash on fastboot mode
(NO USB DEVICE CONNECTED)

Have you tried whit QFil programm?

Related

[Hard Brick] My realme Q have hard brick after format data in TWRP

Help me. pls . i cant boot to fastboot
Lingg said:
Help me. pls . i cant boot to fastboot
Click to expand...
Click to collapse
If you have TWRP then you are saved otherwise you need to visit service centre.
Lingg said:
Help me. pls . i cant boot to fastboot
Click to expand...
Click to collapse
Search internet how to enter edl mode to flash ROM with Qfil
People are willing to help, but no response from the post creator. Many others might be in the same situation waiting for a solution. Come on.
I've bricked my device countless times but it only disabled booting to system and recovery for me. Fastboot always kept usable for me no matter how badly I messed up anything. Then I could flash twrp and vbmeta through fastboot.bat solution on PC and finally a working ROM from TWRP. What did you do? Please write about your situation in detail so I might try to come up with a solution. I'm also a realme Q user.
jijojamie said:
People are willing to help, but no response from the post creator. Many others might be in the same situation waiting for a solution. Come on.
Click to expand...
Click to collapse
You need to open your phone and "short" the board using a paperclip or tweezers
Install Qualcomm Snapdragon drivers on pc
When you connect your phone it will appear as Qualcomm 9008 in device manager of windows
Download Qfil flashing program from Qualcomm..install it. ..run it ..it will detect your phone
Flash stock fastboot rom to device using QFIL
nobody can do all the work for you
Google :
-Testpoint realme
-Qfil Qualcomm
-Qualcomm 9008 drivers
- fastboot stock ROM realme
-emmc firehose programmers files realme
KevMetal said:
You need to open your phone and "short" the board using a paperclip or tweezers
Install Qualcomm Snapdragon drivers on pc
When you connect your phone it will appear as Qualcomm 9008 in device manager of windows
Download Qfil flashing program from Qualcomm..install it. ..run it ..it will detect your phone
Flash stock fastboot rom to device using QFIL
nobody can do all the work for you
Google :
-Testpoint realme
-Qfil Qualcomm
-Qualcomm 9008 drivers
- fastboot stock ROM realme
-emmc firehose programmers files realme
Click to expand...
Click to collapse
Ohhh god, that's so advanced stuff.
Msg misunderstood...
I just said there maybe others in the same situation, not me. I won't dare to open my phone and do those stuff because i have messed many in the past. I am on stock rom and very happy..
I was just concerned about the person who posted this thread. Sorry if you misunderstood my msg.
I upgraded to realme ui 1.0, and then formatted data. The result is the same as you. Finally, I can only change the motherboard
gigdn said:
I upgraded to realme ui 1.0, and then formatted data. The result is the same as you. Finally, I can only change the motherboard
Click to expand...
Click to collapse
If you are on RUI 1.0, you will have fastboot and stock recovery access. You can download latest UI and install it via stock recovery. Why change MB?
KevMetal said:
You need to open your phone and "short" the board using a paperclip or tweezers
Install Qualcomm Snapdragon drivers on pc
When you connect your phone it will appear as Qualcomm 9008 in device manager of windows
Download Qfil flashing program from Qualcomm..install it. ..run it ..it will detect your phone
Flash stock fastboot rom to device using QFIL
nobody can do all the work for you
Google :
-Testpoint realme
-Qfil Qualcomm
-Qualcomm 9008 drivers
- fastboot stock ROM realme
-emmc firehose programmers files realme
Click to expand...
Click to collapse
I am not able to get emmc firehose file for realme x2 pro.. still searching for that. can you suggest me where to get?

Unmodified system partition

Hallo,
My device (redmi 9a) is stuck in unmodified system partition and cannot swipe to unlock and cannot fastboot either.
Is there a way to restore it?
i suggest you try EDL mode with EDL cable... worked for me...
dreadmachine said:
i suggest you try EDL mode with EDL cable... worked for me...
Click to expand...
Click to collapse
I am trying right now the edl mode but still not recognized by the pc. I am not sure if the edl points i am using are correct. Thanks for the reply
VasilisPpdm said:
I am trying right now the edl mode but still not recognized by the pc. I am not sure if the edl points i am using are correct. Thanks for the reply
Click to expand...
Click to collapse
did you install drivers??

Redmi Note 7 Pro Bricked and bootloader is locked

Hi
My Redmi note 7 pro is bricked and it is in locked state .
I tried flashing fastboot rom from edl mode
But it gaves errors like
1) cannot receive hello packet
2)Only nop and sig tag can be recevied before authentication.
Please help me guys regarding this its been a while without my phone
AwesomeAman said:
Hi
My Redmi note 7 pro is bricked and it is in locked state .
I tried flashing fastboot rom from edl mode
But it gaves errors like
1) cannot receive hello packet
2)Only nop and sig tag can be recevied before authentication.
Please help me guys regarding this its been a while without my phone
Click to expand...
Click to collapse
Firstly, can you still boot into Fastboot mode? Secondly, you said you flash fastboot ROM from EDL, how you get into that EDL mode, and you're flashing by MiFlash right?
Clear the information, I might help you!
LinhBT said:
Firstly, can you still boot into Fastboot mode? Secondly, you said you flash fastboot ROM from EDL, how you get into that EDL mode, and you're flashing by MiFlash right?
Clear the information, I might help you!
Click to expand...
Click to collapse
Answers:
Yes it is going on fastboot mode
I got into edl mode by opening back Pannell of my device and i connected edl points
I am flashing via mi flash.
Actually in mi flash tool by mistake i flashed fastboot rom by selecting flash and lock.
Now when i flash the same by selecting clean all option by putting my device on edl mode
It show cannot receive hello packet.
This put me in this trouble
AwesomeAman said:
Answers:
Yes it is going on fastboot mode
I got into edl mode by opening back Pannell of my device and i connected edl points
I am flashing via mi flash.
Actually in mi flash tool by mistake i flashed fastboot rom by selecting flash and lock.
Now when i flash the same by selecting clean all option by putting my device on edl mode
It show cannot receive hello packet.
This put me in this trouble
Click to expand...
Click to collapse
Right, then you did the testpoint trick to get in EDL mode! Ofcourse now you can't use MiFlash with clean all to flash your device since your device is now in brick state. Only solution now is to find the factory images of your device, along with an authenticated prog file then use QFIL to force flash into device. You may inbox me if need further instructions!
i have the same issue pls help
LinhBT said:
Right, then you did the testpoint trick to get in EDL mode! Ofcourse now you can't use MiFlash with clean all to flash your device since your device is now in brick state. Only solution now is to find the factory images of your device, along with an authenticated prog file then use QFIL to force flash into device. You may inbox me if need further instructions!
Click to expand...
Click to collapse
Sir, I have exact same device and I am also stuck in edl mode. It looks there are no patched firehose files for violet. Is there any possible way you can help??

searching for OP8 in2019 verizon flash file

i need OP8 in2019 verizon flash file i flash global rom but want to back verizon
BL also unlocked so is there fastboot rom etc?
[OP8][OOS VZW 67CD] Unbrick tool to restore your device to OxygenOS
My phone shows up as IN2019, I don't see where it would be QDLOADER 9008 or QHUSB_BULK. I can't get into EDL. What should I try next? I tried fastboo and ABD nothing gets it into edl
forum.xda-developers.com
FoxyDrew said:
[OP8][OOS VZW 67CD] Unbrick tool to restore your device to OxygenOS
My phone shows up as IN2019, I don't see where it would be QDLOADER 9008 or QHUSB_BULK. I can't get into EDL. What should I try next? I tried fastboo and ABD nothing gets it into edl
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks alot bro I'll try it tomorrow
FoxyDrew said:
[OP8][OOS VZW 67CD] Unbrick tool to restore your device to OxygenOS
My phone shows up as IN2019, I don't see where it would be QDLOADER 9008 or QHUSB_BULK. I can't get into EDL. What should I try next? I tried fastboo and ABD nothing gets it into edl
forum.xda-developers.com
Click to expand...
Click to collapse
Bro is there any fastboot rom for this?
Mr Hassan said:
Bro is there any fastboot rom for this?
Click to expand...
Click to collapse
No, I promise MSM will work, you just need to figure out the drivers.
FoxyDrew said:
No, I promise MSM will work, you just need to figure out the drivers.
Click to expand...
Click to collapse
The problem is not in your file problem is in my device i was flashed another file or param now when i try ti flash it its giving param mismatch etc error
Even i flash vzw param via FB then i get smt error and still not able to flash
I have only way now is FB rom to fix it
FoxyDrew said:
No, I promise MSM will work, you just need to figure out the drivers.
Click to expand...
Click to collapse
Why i want to back vzw? Coz my device is no service issue i need to back stock rom then need to check is it in network lock or what

Question POCO X3 PRO ONLY SHOWS AS COM10 PORT

Hello, I was trying to flash stock rom with miflash. I desconected the device then it shut down from fastboot and now it is dead. full dead. does not go on twrp or fastboot screen. only thing is that the pc shows it as "Qualcomm HS-USB QDLoader 9008 (COM10)". I am trying to flash fastboot on with miflash but the device is recognized as COM10 only. Are you guys familiar with that? any help?
elpatcho said:
Hello, I was trying to flash stock rom with miflash. I desconected the device then it shut down from fastboot and now it is dead. full dead. does not go on twrp or fastboot screen. only thing is that the pc shows it as "Qualcomm HS-USB QDLoader 9008 (COM10)". I am trying to flash fastboot on with miflash but the device is recognized as COM10 only. Are you guys familiar with that? any help?
Click to expand...
Click to collapse
1) Xiaomi/Redmi/Poco official repair center for warranty rescue or paid repair.
2) Authorization EDL Xiaomi account (unofficial paid service online, beware of *spam*paid*services*)
3) Probably later there will be people say join Telegram with paid EDL repair in reply. Same as 2)
elpatcho said:
Hello, I was trying to flash stock rom with miflash. I desconected the device then it shut down from fastboot and now it is dead. full dead. does not go on twrp or fastboot screen. only thing is that the pc shows it as "Qualcomm HS-USB QDLoader 9008 (COM10)". I am trying to flash fastboot on with miflash but the device is recognized as COM10 only. Are you guys familiar with that? any help?
Click to expand...
Click to collapse
This is hard brick... Go to the repear center or watch guides on YouTube

Categories

Resources