Hello, I was trying to flash stock rom with miflash. I desconected the device then it shut down from fastboot and now it is dead. full dead. does not go on twrp or fastboot screen. only thing is that the pc shows it as "Qualcomm HS-USB QDLoader 9008 (COM10)". I am trying to flash fastboot on with miflash but the device is recognized as COM10 only. Are you guys familiar with that? any help?
elpatcho said:
Hello, I was trying to flash stock rom with miflash. I desconected the device then it shut down from fastboot and now it is dead. full dead. does not go on twrp or fastboot screen. only thing is that the pc shows it as "Qualcomm HS-USB QDLoader 9008 (COM10)". I am trying to flash fastboot on with miflash but the device is recognized as COM10 only. Are you guys familiar with that? any help?
Click to expand...
Click to collapse
1) Xiaomi/Redmi/Poco official repair center for warranty rescue or paid repair.
2) Authorization EDL Xiaomi account (unofficial paid service online, beware of *spam*paid*services*)
3) Probably later there will be people say join Telegram with paid EDL repair in reply. Same as 2)
elpatcho said:
Hello, I was trying to flash stock rom with miflash. I desconected the device then it shut down from fastboot and now it is dead. full dead. does not go on twrp or fastboot screen. only thing is that the pc shows it as "Qualcomm HS-USB QDLoader 9008 (COM10)". I am trying to flash fastboot on with miflash but the device is recognized as COM10 only. Are you guys familiar with that? any help?
Click to expand...
Click to collapse
This is hard brick... Go to the repear center or watch guides on YouTube
Related
Hello everyone!
After flashing a wrong firmware through LG Flash tool i got "Qualcomm HS-USB QDLoader 9008" in device manager.
Than i found THIS guide, i flashed partitions to sd card, than boot in TWRP and flash all partitions(except laf.bin by that guide) from Lollipop firmware(i think it was a big mistake). As result - tablet still run only in fastboot mode, but without sd card.
The big trouble now is impossibility to boot in TWRP again, to any command fastboot returns "FAILED (remote: unknown command)"
I think the only way to unbrick tablet now is to force the "Qualcomm HS-USB QDLoader 9008" mode and flash all files extracted from firmware(with laf.bin) and restore the tablet with official LGMobile Support Tool.
But i dont know, how to force the "Qualcomm HS-USB QDLoader 9008"? Does anyone know where is testpoint of V400?
Hope you help
OggyTheCat said:
Hello everyone! After flashing a wrong firmware through LG Flash tool i got "Qualcomm HS-USB QDLoader 9008" in device manager...
Click to expand...
Click to collapse
I don't have this device but, you may be able to obtain some member guidance within one of the following, device specific, threads.
https://forum.xda-developers.com/showthread.php?t=2919039
https://forum.xda-developers.com/showthread.php?t=3292740
https://forum.xda-developers.com/showthread.php?t=3297045
https://forum.xda-developers.com/showthread.php?t=2838995
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Hey there... I was trying to get my OnePlus 7 -That I just bought - to a rooted Android 10, updating was the easy part but while trying to "fastboot flash boot twrp.img" I think I somehow got myself stuck making the bootloader (aka fastboot mode ) as my main thing the phone load into and now when I turn on the phone it goes straight to fastboot mode I go and try to "fastboot flash boot twrp.img" it says OKAY twice but I can't load into recovery it takws me back to the fast boot again.... Idk what to do... Help
More into:
I got to the twrp before once during the process and idk why dumb me rebooted when I couldn't access my phone files from pc I wanted to put the image of OOS on a flash drive and via OTG but once I restarted by mistake after that whatever choice I make on the fastboot screen will quickly restart and get back to the same screen, so I can do "fastboot flash boot twrp.img" successfully but I can't load to it I hit reboot to recover or Start or Reboot Bootloader nothing takes me to twrp,
Also when I try "fastboot flash recovery twrp.img"
It says sending recovery okay, writing recovery failed, (remote: (recovery_b) no such partition)
I hope to get any help and I'm sorry if it's an obvious thing I couldn't notice, I'm not the sharpest between my brothers. Momma says. ? with me. I'll appreciate it I promise.
Have you tried this Fastboot ROMS?
Use this:
https://forum.xda-developers.com/oneplus-7/how-to/unbrick-tool-oneplus-7-msmtool-hydrogen-t3953240
After that just put offical Rom zip for your region on internal memory and after that install update. voila
Unbrick tool also available for OxygenOS pie https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325 :good:
Help
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
sourabhone said:
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
Click to expand...
Click to collapse
"sahara server" problem : disable driver signature / update drivers
https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
Qualcomm dr: https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
First of all twrp.img is a recovery image. You would normally use fastboot flash recovery twrp.img.
Secondly, you aren't supposed to flash twrp.img but use fastboot boot twrp.img and then boot to twrp and flash the twrp installer. If you can boot into fastboot, type fastboot boot twrp.img(twrp.70 for android q) and then flash twrp installer and oos. And if you can't boot into recovery you will have to use the msm tool.
daitalos said:
"sahara server" problem : disable driver signature / update drivers
Qualcomm dr:
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
Click to expand...
Click to collapse
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
sourabhone said:
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
Click to expand...
Click to collapse
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Thanks
daitalos said:
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : h t tp s: // forum . xda-developers . com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Click to expand...
Click to collapse
Thank you so much daitalos.
At last i was able to recover my phone from being a paperweight.Used my other laptop and it worked perfectly first time.Maybe my 1st laptop was having some issues.
Help me. pls . i cant boot to fastboot
Lingg said:
Help me. pls . i cant boot to fastboot
Click to expand...
Click to collapse
If you have TWRP then you are saved otherwise you need to visit service centre.
Lingg said:
Help me. pls . i cant boot to fastboot
Click to expand...
Click to collapse
Search internet how to enter edl mode to flash ROM with Qfil
People are willing to help, but no response from the post creator. Many others might be in the same situation waiting for a solution. Come on.
I've bricked my device countless times but it only disabled booting to system and recovery for me. Fastboot always kept usable for me no matter how badly I messed up anything. Then I could flash twrp and vbmeta through fastboot.bat solution on PC and finally a working ROM from TWRP. What did you do? Please write about your situation in detail so I might try to come up with a solution. I'm also a realme Q user.
jijojamie said:
People are willing to help, but no response from the post creator. Many others might be in the same situation waiting for a solution. Come on.
Click to expand...
Click to collapse
You need to open your phone and "short" the board using a paperclip or tweezers
Install Qualcomm Snapdragon drivers on pc
When you connect your phone it will appear as Qualcomm 9008 in device manager of windows
Download Qfil flashing program from Qualcomm..install it. ..run it ..it will detect your phone
Flash stock fastboot rom to device using QFIL
nobody can do all the work for you
Google :
-Testpoint realme
-Qfil Qualcomm
-Qualcomm 9008 drivers
- fastboot stock ROM realme
-emmc firehose programmers files realme
KevMetal said:
You need to open your phone and "short" the board using a paperclip or tweezers
Install Qualcomm Snapdragon drivers on pc
When you connect your phone it will appear as Qualcomm 9008 in device manager of windows
Download Qfil flashing program from Qualcomm..install it. ..run it ..it will detect your phone
Flash stock fastboot rom to device using QFIL
nobody can do all the work for you
Google :
-Testpoint realme
-Qfil Qualcomm
-Qualcomm 9008 drivers
- fastboot stock ROM realme
-emmc firehose programmers files realme
Click to expand...
Click to collapse
Ohhh god, that's so advanced stuff.
Msg misunderstood...
I just said there maybe others in the same situation, not me. I won't dare to open my phone and do those stuff because i have messed many in the past. I am on stock rom and very happy..
I was just concerned about the person who posted this thread. Sorry if you misunderstood my msg.
I upgraded to realme ui 1.0, and then formatted data. The result is the same as you. Finally, I can only change the motherboard
gigdn said:
I upgraded to realme ui 1.0, and then formatted data. The result is the same as you. Finally, I can only change the motherboard
Click to expand...
Click to collapse
If you are on RUI 1.0, you will have fastboot and stock recovery access. You can download latest UI and install it via stock recovery. Why change MB?
KevMetal said:
You need to open your phone and "short" the board using a paperclip or tweezers
Install Qualcomm Snapdragon drivers on pc
When you connect your phone it will appear as Qualcomm 9008 in device manager of windows
Download Qfil flashing program from Qualcomm..install it. ..run it ..it will detect your phone
Flash stock fastboot rom to device using QFIL
nobody can do all the work for you
Google :
-Testpoint realme
-Qfil Qualcomm
-Qualcomm 9008 drivers
- fastboot stock ROM realme
-emmc firehose programmers files realme
Click to expand...
Click to collapse
I am not able to get emmc firehose file for realme x2 pro.. still searching for that. can you suggest me where to get?
i need OP8 in2019 verizon flash file i flash global rom but want to back verizon
BL also unlocked so is there fastboot rom etc?
[OP8][OOS VZW 67CD] Unbrick tool to restore your device to OxygenOS
My phone shows up as IN2019, I don't see where it would be QDLOADER 9008 or QHUSB_BULK. I can't get into EDL. What should I try next? I tried fastboo and ABD nothing gets it into edl
forum.xda-developers.com
FoxyDrew said:
[OP8][OOS VZW 67CD] Unbrick tool to restore your device to OxygenOS
My phone shows up as IN2019, I don't see where it would be QDLOADER 9008 or QHUSB_BULK. I can't get into EDL. What should I try next? I tried fastboo and ABD nothing gets it into edl
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks alot bro I'll try it tomorrow
FoxyDrew said:
[OP8][OOS VZW 67CD] Unbrick tool to restore your device to OxygenOS
My phone shows up as IN2019, I don't see where it would be QDLOADER 9008 or QHUSB_BULK. I can't get into EDL. What should I try next? I tried fastboo and ABD nothing gets it into edl
forum.xda-developers.com
Click to expand...
Click to collapse
Bro is there any fastboot rom for this?
Mr Hassan said:
Bro is there any fastboot rom for this?
Click to expand...
Click to collapse
No, I promise MSM will work, you just need to figure out the drivers.
FoxyDrew said:
No, I promise MSM will work, you just need to figure out the drivers.
Click to expand...
Click to collapse
The problem is not in your file problem is in my device i was flashed another file or param now when i try ti flash it its giving param mismatch etc error
Even i flash vzw param via FB then i get smt error and still not able to flash
I have only way now is FB rom to fix it
FoxyDrew said:
No, I promise MSM will work, you just need to figure out the drivers.
Click to expand...
Click to collapse
Why i want to back vzw? Coz my device is no service issue i need to back stock rom then need to check is it in network lock or what
Hi,
I have a RMX 3370 and it is on EDL mode after i've hard-brick it.
Is there a solution to flash firmware file (.OFP) using a tool?
the pc read the device "Qualcomn HS-USB QDLoader 9006 (COM3)", for this i understood that the device is in EDL mode...
Thx to all support!
I flashed with this, https://forum.xda-developers.com/attachments/gt-rar.5718487/
make sure ofp the same version.
eimantasxd said:
I flashed with this, https://forum.xda-developers.com/attachments/gt-rar.5718487/
make sure ofp the same version.
Click to expand...
Click to collapse
sorry it says: no device detected, i can't flash on fastboot mode
(NO USB DEVICE CONNECTED)
Have you tried whit QFil programm?