Hi, I have a problem with my fp2:
It seems that I flashed a corrupted emmc_appsboot file. Afterwards my phone didn't started again. The Fairphone-Logo-Screen doesn't appear and I can't boot into Fastboot-Mode or TWRP :crying:
Maybe there will have somebody what I can do. Please help me...
on a windows pc my device is shown as 'Marshall London HS-USB Diagnostics 9006 mode'
It-was-me said:
emmc_appsboot
Click to expand...
Click to collapse
I don't actually know what an emmc_appsboot is or how one would flash it ... but if you can't get into fastboot mode anymore ... maybe fairphone themselves can help?
Related
I tried to install cm12.1 through fastboot flashing. By mistake, i flashed a wrong package. Now the phone is hardbricked. Computer is detecting the device as Qualcomm HS-USB QDLoader 9008. I've seen a guide to debrick YUREKA with QFIL ( http://forum.xda-developers.com/yureka/help/reviving-hard-bricked-yu-yureka-t3154577 ). I think I can do the same on my phone. But I need this bootloader recovery package(I think it is... ) for flashing. How can I get these files?Can anyone help me to debrick my phone? Is there any alternate solution for this?
anandvgeorge said:
I tried to install cm12.1 through fastboot flashing. By mistake, i flashed a wrong package. Now the phone is hardbricked. Computer is detecting the device as Qualcomm HS-USB QDLoader 9008. I've seen a guide to debrick YUREKA with QFIL ( http://forum.xda-developers.com/yureka/help/reviving-hard-bricked-yu-yureka-t3154577 ). I think I can do the same on my phone. But I need this bootloader recovery package(I think it is... ) for flashing. How can I get these files?Can anyone help me to debrick my phone? Is there any alternate solution for this?
Click to expand...
Click to collapse
May this will help you.
Ess Arr said:
May this will help you.
Click to expand...
Click to collapse
My phone has got hardbricked . I can't boot into fastboot mode. I've seen a method to recover YUREKA from hardbrick on http://forum.xda-developers.com/yureka/help/reviving-hard-bricked-yu-yureka-t3154577. Can we do the same on YUPHORIA??
Did you try this?
anandvgeorge said:
My phone has got hardbricked . I can't boot into fastboot mode. I've seen a method to recover YUREKA from hardbrick on http://forum.xda-developers.com/yureka/help/reviving-hard-bricked-yu-yureka-t3154577. Can we do the same on YUPHORIA??
Click to expand...
Click to collapse
Hi,
Please share if you were able to recover your mobile.
puriadeb said:
Hi,
Please share if you were able to recover your mobile.
Click to expand...
Click to collapse
I couldn't. I got the phone replaced. Later I found some methods to revive back the phone from this condition on the internet.
Hi,
my k018 tablet stuck on usb logo (cloverview on device manager) after write wrong fastboot.img & boot.img
please help me how to flash factory files in xfstk or intel phone flash tool? (I havent files, who can give me them?)
aydin.gsm1 said:
Hi,
my k018 tablet stuck on usb logo (cloverview on device manager) after write wrong fastboot.img & boot.img
please help me how to flash factory files in xfstk or intel phone flash tool? (I havent files, who can give me them?)
Click to expand...
Click to collapse
Hello!
I have the same problem. You still have not found a solution ??
Mafistofil said:
Hello!
I have the same problem. You still have not found a solution ??
Click to expand...
Click to collapse
I also have the same problem. Someone helps, please!!!
I'm reading this thread. It's maybe useful.
http://forum.xda-developers.com/android/general/asus-aft-flash-tool-free-solution-t3165954
does any one know a detailed methord to unbrick... a Hard bricked device....
it got hard Bricked while flashing stock miui....
I can not get into fastboot mode...
Hard Bricked.....
your device have a red blinking LED?
can your computer / laptop detect your phone?
if yes
do a fastboot again... , or do it 1 by 1
"Fastboot flash system system.img" and so on
We can't kill qualcomm devices...They can be saved from any stage...Use Qfil to flash(if fastboot mode is not working)...
mi 4i does not boot up
My mi 4i does not boot up does not going to fast boot when i connect it to pc no charging symbol bt pc showd usb device doesnot recognise code 43
Install mi4i Qualcomm drivers and flash using latest miflash tool.
Flash tool will recognize the device as com 10 or com 30 or something like that
Sharath007 said:
We can't kill qualcomm devices...They can be saved from any stage...Use Qfil to flash(if fastboot mode is not working)...
Click to expand...
Click to collapse
hello
I have a bricked Mi4i I am trying to restore, can u help me with the steps required to use Qfil; as in what files to download and stuff like that? I downloaded the QFIL, installed the drivers( my phone shows up in Device Manage>Port>Qualcomm HS-USB Diagnostics 9006)
Thank you for your help.
faizauthar12 said:
your device have a red blinking LED?
can your computer / laptop detect your phone?
if yes
do a fastboot again... , or do it 1 by 1
"Fastboot flash system system.img" and so on
Click to expand...
Click to collapse
Hello @faizauthar12.
Can you help me with the steps required to unbrick a hardbricked Mi4i?
The phone had the red led blinking and no mi logo, no recovery and no fastboot.
it is recognized by my pc as Qualcomm HS-USB Diagnostics 9006.
and when I connect to the PC, it shows 4 drives that says it needs to be formatted.
Any help is appreciated. Thank you very much.
Regards
Regan
faizauthar12 said:
your device have a red blinking LED?
can your computer / laptop detect your phone?
if yes
do a fastboot again... , or do it 1 by 1
"Fastboot flash system system.img" and so on
Click to expand...
Click to collapse
Hello @faizauthar12.
Can you help me with the steps required to unbrick a hardbricked Mi4i?
The phone had the red led blinking and no mi logo, no recovery and no fastboot.
it is recognized by my pc as Qualcomm HS-USB Diagnostics 9006.
and when I connect to the PC, it shows 4 drives that says it needs to be formatted.
Any help is appreciated. Thank you very much.
Regards
Regan
reganEZ said:
Hello @faizauthar12.
Can you help me with the steps required to unbrick a hardbricked Mi4i?
The phone had the red led blinking and no mi logo, no recovery and no fastboot.
it is recognized by my pc as Qualcomm HS-USB Diagnostics 9006.
and when I connect to the PC, it shows 4 drives that says it needs to be formatted.
Any help is appreciated. Thank you very much.
Regards
Regan
Click to expand...
Click to collapse
flash your phone with fastboot ROM by usign Xiaomi Mi flash tools
reganEZ said:
Hello @faizauthar12.
Can you help me with the steps required to unbrick a hardbricked Mi4i?
The phone had the red led blinking and no mi logo, no recovery and no fastboot.
it is recognized by my pc as Qualcomm HS-USB Diagnostics 9006.
and when I connect to the PC, it shows 4 drives that says it needs to be formatted.
Any help is appreciated. Thank you very much.
Regards
Regan
Click to expand...
Click to collapse
Happened for me once. Refer this
http://en.miui.com/forum.php?mod=viewthread&tid=474376&mobile=2
You can find videos on QPST in YouTube.
faizauthar12 said:
flash your phone with fastboot ROM by usign Xiaomi Mi flash tools
Click to expand...
Click to collapse
When i try that, the phone is detected as 12345...and then the status bar reaches 100% but nothing else happens. How long does it take for it to flash? any particular miflash tools version or ROM versions?
Thank you
---------- Post added at 12:39 PM ---------- Previous post was at 11:53 AM ----------
Sharath007 said:
Happened for me once. Refer this
http://en.miui.com/forum.php?mod=viewthread&tid=474376&mobile=2
You can find videos on QPST in YouTube.
Click to expand...
Click to collapse
When i try the QFIL method, it says "cant switch to EDL mode or something"
Any help?
Thanks in advance
here is the screenshot btw
reganEZ said:
here is the screenshot btw
Click to expand...
Click to collapse
Seems like you are flashing Android lollipop. Have you tried flashing miui 8 or 9 on Android M using miflash.
Also use old miflash tool, to avoid any compatibility issues.
Sharath007 said:
Seems like you are flashing Android lollipop. Have you tried flashing miui 8 or 9 on Android M using miflash.
Also use old miflash tool, to avoid any compatibility issues.
Click to expand...
Click to collapse
Ok I will try that too. When u say old miflash which version wud u recommend?
reganEZ said:
Ok I will try that too. When u say old miflash which version wud u recommend?
Click to expand...
Click to collapse
Miui 8 or 9 fastboot rom contains repair scripts as well. When you flash them, it should solve issues if any.
Use any of 2015 year releases like
MiFlash 2015.06.01.0
Load all files properly and also use flash all while flashing. It should work.
Sharath007 said:
Miui 8 or 9 fastboot rom contains repair scripts as well. When you flash them, it should solve issues if any.
Use any of 2015 year releases like
MiFlash 2015.06.01.0
Load all files properly and also use flash all while flashing. It should work.
Click to expand...
Click to collapse
I tried this too. it takes about 114 seconds and says operation completed successfully but the phone wont still boot up
reganEZ said:
I tried this too. it takes about 114 seconds and says operation completed successfully but the phone wont still boot up
Click to expand...
Click to collapse
For final attempts ...
1.Use different usb cable and try or other desktop.
2. Connect phone by press and holding vol up and vol down and power buttons , wait until you hear sound and then flash . If no use, try different combinations like holding volume up alone
3. Use QPST method for flashing(this is how i unbricked my mobile after flashing wrong bootloader)
Try flashing MIUI fastboot ROM using "command prompt", instead of Mi flastool, you can find the procedure of it on miui forum..
Hey there... I was trying to get my OnePlus 7 -That I just bought - to a rooted Android 10, updating was the easy part but while trying to "fastboot flash boot twrp.img" I think I somehow got myself stuck making the bootloader (aka fastboot mode ) as my main thing the phone load into and now when I turn on the phone it goes straight to fastboot mode I go and try to "fastboot flash boot twrp.img" it says OKAY twice but I can't load into recovery it takws me back to the fast boot again.... Idk what to do... Help
More into:
I got to the twrp before once during the process and idk why dumb me rebooted when I couldn't access my phone files from pc I wanted to put the image of OOS on a flash drive and via OTG but once I restarted by mistake after that whatever choice I make on the fastboot screen will quickly restart and get back to the same screen, so I can do "fastboot flash boot twrp.img" successfully but I can't load to it I hit reboot to recover or Start or Reboot Bootloader nothing takes me to twrp,
Also when I try "fastboot flash recovery twrp.img"
It says sending recovery okay, writing recovery failed, (remote: (recovery_b) no such partition)
I hope to get any help and I'm sorry if it's an obvious thing I couldn't notice, I'm not the sharpest between my brothers. Momma says. ? with me. I'll appreciate it I promise.
Have you tried this Fastboot ROMS?
Use this:
https://forum.xda-developers.com/oneplus-7/how-to/unbrick-tool-oneplus-7-msmtool-hydrogen-t3953240
After that just put offical Rom zip for your region on internal memory and after that install update. voila
Unbrick tool also available for OxygenOS pie https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325 :good:
Help
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
sourabhone said:
same issue with me...whenever i try to recover using fastboot method,it gives an error like product name is sdm845 and required is msmnile
and when i use the msm tool , it gives an error of sahara server....
any help is highly appreciated.
Click to expand...
Click to collapse
"sahara server" problem : disable driver signature / update drivers
https://www.howtogeek.com/167723/ho...8.1-so-that-you-can-install-unsigned-drivers/
Qualcomm dr: https://gsmusbdrivers.com/download/android-qualcomm-usb-driver/
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
First of all twrp.img is a recovery image. You would normally use fastboot flash recovery twrp.img.
Secondly, you aren't supposed to flash twrp.img but use fastboot boot twrp.img and then boot to twrp and flash the twrp installer. If you can boot into fastboot, type fastboot boot twrp.img(twrp.70 for android q) and then flash twrp installer and oos. And if you can't boot into recovery you will have to use the msm tool.
daitalos said:
"sahara server" problem : disable driver signature / update drivers
Qualcomm dr:
you must to press power button at the same time you plug in usb cable.....keep trying and your computer will start installing drivers for Port 9008
(you can use Google Search for more Info about "sahara" problem)
Click to expand...
Click to collapse
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
sourabhone said:
Thanks daitalos for the reply..
the drivers for 9008 are installed as visible in device manager...
the msm tool shows the phone as connected, when i start the process, it waits for loading firehose binary and waits there for 10 sec.....after that throws error of sahara communication failed (FH:258)
i again tried the volume up + power button combo but to no avail...
also there is no red led light on the phone while charging
Click to expand...
Click to collapse
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : https://forum.xda-developers.com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Thanks
daitalos said:
In device manager you can see "Qualcomm HS -USB QDLoader 9008 (com3 for example) ?
You tried another usb port (?)
in windows 10 it is better for the computer to have the "developer mode" enabled
Close any antivirus temporarily..
Run msm tool as Administrator ofcourse..
(I don't know but If you try with msm tool from here : h t tp s: // forum . xda-developers . com/oneplus-7/how-to/op7-unbrick-tool-to-restore-device-to-t3954325
you should see the models it supports (GM1900, GM1901, GM1903, GM1905)
_I think the problem is on the computer and the communication with the device...
sry for english
Click to expand...
Click to collapse
Thank you so much daitalos.
At last i was able to recover my phone from being a paperweight.Used my other laptop and it worked perfectly first time.Maybe my 1st laptop was having some issues.
hi please help me ...my oneplus 9 fully bricked ...i cant go fastboot mode or recovery mode .....can anyone suggest me what to do now
SABBIRAHMED93 said:
hi please help me ...my oneplus 9 fully bricked ...i cant go fastboot mode or recovery mode .....can anyone suggest me what to do now
Click to expand...
Click to collapse
Find correct msm tool in threads run on device.
SABBIRAHMED93 said:
hi please help me ...my oneplus 9 fully bricked ...i cant go fastboot mode or recovery mode .....can anyone suggest me what to do now
Click to expand...
Click to collapse
Sorry but... how? I end up deleting crucial partition, but the i resurected the phone 5 minutes later. Just MSM...
was your OP9 a t-mo variant ?
barguybrady said:
was your OP9 a t-mo variant ?
Click to expand...
Click to collapse
no
Sheldd said:
Sorry but... how? I end up deleting crucial partition, but the i resurected the phone 5 minutes later. Just MSM...
Click to expand...
Click to collapse
can you provide me the msm file link
I have inly the fastboot menu left i need bugjaeger command to load or reflash oroper boot or recovery alont eith proper said files
Im not sure how it happened i didnt unlock critical files thankfully
I just know my commands are close to reflashing it but the good morning menu that says the bootloader is unlocked and software Integrity cannot be guaranteed just gets stuck and loops for recovery and edl and still allows the other phine into bugjaeger via fastboot on the oneplus 9 and then loops