Database Info

How to remove JFv1.41

Seeing as how I still don't have root access some how, is there any way to restore my G1 back to orginal/factory setup or remove JF?

How do you have JF v 1.41 without root?

Crusher16 said:
Seeing as how I still don't have root access some how, is there any way to restore my G1 back to orginal/factory setup or remove JF?
Click to expand...
Click to collapse
http://www.webnetta.com/2009/01/02/t-mobile-g1-rc30-to-jfv13/
follow this to step 9. it will give you stock RC29, then you can wait for the OTA updates. Or if you want, you can try again, these are the instructions I used, except step 12, i just used the telnet app from the market instead of downloading.
GL

I7oobie said:
How do you have JF v 1.41 without root?
Click to expand...
Click to collapse
Beats me. I can't do anything that requires root so I give up. Tried everything over and over again a few times. Whats the point in doing it when it doesn't work and now I can't get any updates? Oh well.
acousticdank said:
http://www.webnetta.com/2009/01/02/t-mobile-g1-rc30-to-jfv13/
follow this to step 9. it will give you stock RC29, then you can wait for the OTA updates. Or if you want, you can try again, these are the instructions I used, except step 12, i just used the telnet app from the market instead of downloading.
GL
Click to expand...
Click to collapse
Awesome, thanks.

Crusher its quite obvious, you either dont have root, or you do and have no idea what it is. So the steps given above should help you out, whatever your situation is.

If you have it rooted and want to switch back to the standard loadset..
1) http://android-dls.com/wiki/index.php?title=Root_For_RC30 download RC29NBH.zip
2) Extract that onto your SD Card
3) Turn off phone
4) Turn phone back on while holding the Camera Button
5) Press the Power button to install
6) http://android-dls.com/wiki/index.php?title=OTA_Updates download "RC30 Quick Patch, Not full update"
7) Copy it to your sd card and rename it to update.zip
8) Turn phone off
9) Turn phone back on while holding the Home button
10) Press ALT + S
11) You will be back at the standard loadset and can then apply the RC33 update.

archangelugp said:
If you have it rooted and want to switch back to the standard loadset..
1) http://android-dls.com/wiki/index.php?title=Root_For_RC30 download RC29NBH.zip
2) Extract that onto your SD Card
3) Turn off phone
4) Turn phone back on while holding the Camera Button
5) Press the Power button to install
6) http://android-dls.com/wiki/index.php?title=OTA_Updates download "RC30 Quick Patch, Not full update"
7) Copy it to your sd card and rename it to update.zip
8) Turn phone off
9) Turn phone back on while holding the Home button
10) Press ALT + S
11) You will be back at the standard loadset and can then apply the RC33 update.
Click to expand...
Click to collapse
This is exactly what I did (prior to this post), and it worked 100%.

..I have a car but it didn't come with a vehicle..

forceshield said:
..I have a car but it didn't come with a vehicle..
Click to expand...
Click to collapse
I just laughed diet coke out of my nose.

I am not liable for any damages caused!

wow....i really almost pissed on myself.........quite random, and funny as hell

[How To] Install The New GOT Update On Milestone

Hello My Friends I've Heard You Are Having Troubler Installing The New Upgrade Or Understanding What Is Needed To Be Done.
Note: THIS IS A WINDOWS BASED HOW TO AND WILL WORK ON WINDOWS ONLY​
Before I Start I must Say, This Is a combination of process and I have not created any of those files or own the right to them so all the links are the same links found on other posts from where i got the info, so by downloading those files you are, supporting them not me i take no credit for this work
Well Here Is the quick Easy Guide In How To Do This
-Fist we Need To Get The Tools To Perform This Operation
pulled From This Tread we need
1. Motorola Drivers For Either 32 or 64 Bits
2. RSD Lite, witch is a tool for flashing your phone.
3. The GOT Open Recovery ToolUpdate: Added Latest version from G.O.T.'S Blog
4.The Firmware Files From Got
2.2.1 FIRMWARE FILES
DACH – GERMANY
http://www.multiupload.com/G9PP7JN78C
DACH AUSTRIA
http://www.multiupload.com/P8DDXCWW03
RETAIL EUROPE (RTEU)
http://www.multiupload.com/6X7H39HGCG
FRANCE RETAIL
http://www.multiupload.com/PK28LXE4SE
ITALY WIND
http://www.multiupload.com/3KYMZNRZW2
UK RETAIL (RTUK)
http://www.multiupload.com/60B78PRKNY
TELUS CANADA
http://www.multiupload.com/5S2CYGP3VW
Click to expand...
Click to collapse
EDIT: G.O.T. Has Added the burnerable open recovery to these sfb files so no need to flash it latter
-Now That We Have The Stuff We Need We are going to do it, fist i must say that unlike other roms that are applied by a backup restore (corect me if im whrong) this is a full flash and its going to reset everything so no apps will remain no setting will remain and is highly recommended that you uninstall every app you have, don't back them up(except for apps some apps that have a create backup file, those seem to work) just uninstall them, and when we are done have them installed again, Here Is A Tool That Will Help You Get There Faster
1.ok you have everything uninstalled right? now time for some action
2.install the proper divers (32 or 64)
3.install the RSD Lite tool
4.unzip the 2.2.1 FIRMWARE FILES you downloaded and you will find a ".sbf" file
5.now connect your phone to USB cable and turn it off
6.boot it in boot-loader mode (press the D-PAD UP key while pressing the power button), some night need you to release the button after a minute, a black screen will be shown on your phone and you will see the divers being installed on your computer.
7.when drivers are done open the RSD Lite tool and your device should appear you can click on it to see details.
8.now click on the "..." buttons that are close to the start button and look for the ".sbf" file, after a couple of seconds it should be ready to start
9.press the start button and do not unplug the cable or let your computer show the screen saver or go to sleep, the posses must not be stopped while it has started .
10.when the posses is done the devise will restart and voala, you have 2.2
-As GOT stands there are some bugs on the firmware and they have developed a fix to them and get root and overclock, here is what you have to do.
1. unzip the got open recovery tool into the root of your SD card
2.check this quote
NOTE: On some devices, we have encountered that rooting directly after flashing without rebooting after the initial flash can bring some issues with RootExplorer not asking for root permissions. To be safe, reboot after flash so that the “welcome to milestone” menu comes up, set up the device in general, then reboot to recovery and root the device as well as apply our 2.2.1 tweaks with Launcher, Services.jar fix and Wireless Tethering app.
Click to expand...
Click to collapse
this means if the fist time your milestone got restarted and you saw "Welcome to Milestone" Message You are good an you can root.
but if you didn't then restart you phone and see if the message comes out, if not , a factory reset should have that scree message shown.
3. open the open recovery by pressing camera and power button at the same time while the device id off. you should see a scree with a "!" symbol on it then press fist volume rocker up button a leave it pressed then press camera button, some letter will pop out.
4. using the pad scroll down to "apply update.zip", after a couple of seconds the GOT menu should pop out (everything from now on uses the pad)
5.root your phone (why not)
6.go down to "Launch 2.2.1 Menu" Option.
7.Here you will see the "Fix Bugs They Are Talking About
One of the first things you should do is use the “Fix 2.2.1 bugs” selection in the new OR 2.2.1 menu after you flash the sbf file.
This tweak will fix some of the issues with the generic sbf build such as dual USB notifications, replacing some stock Motorola applications such as the old launcher/mediagallery and adding the Wireless Tethering application.
Click to expand...
Click to collapse
8. there is the overclock too.
Now your device should have all the things you need to start playing with it,I encourage you to check on some tweaks the GOT team might have, and you might want.
I Hope This Was Helpful enjoy ^_^
To Do For This thread:
Code:
1. Make It More Easy To Use, and clear to read
2. Add Suggestions
3. Add screenshots
4. Add Other OS Options
5. Add Attachments (For Some reason I Can't Now)
Please Post And Rate If This Was Useful

Bug Counter:
Common Problems Found On Thread
http://forum.xda-developers.com/showthread.php?t=810726
1. AppBrain Market Sync Not Connecting To server.
2. Google Chrome To Phone Not Working.
3. WiFi Having Trouble To Connect On Some Routers, Sometimes Not Connecting At All on WPA2
4. Activating The Camera From The The Albums Will "Force Close"
5. Facebook Sync Is Not Working
6. The menu button on the keyboard activates the voice recognition option, and cannot be used to trigger shortcuts anymore (To me its more like a change on the way the keyboard works instead of a bug since you can use the menu button on the screen to trigger keyboard shortcuts)
7. No Vibration On key press
8. Russian Language Will Have Problems with phone and contacts apps
9. problem with android id
If Any Of Those Work On Yours Please Report Witch version you installed maybe yours can help fix others,you think you found a bug and its not listed? post it here and post
Fixing Problems:
1. Problem with android ID:
A. If Not Installed The Update Yet(Needs Root)
-Install This AppAndroidID
-Back your android ID up, and put ir somewhere safe
-follow the guide to update to froyo
-Install This App againAndroidID
-restore your android id
B. If Already did it(Needs Root)
-install this appAndroidID
-invent a number that might serve as your android ID (you need numbers and letters)
-input it on the app

okay nice tut, butttttt... im stuck at the part where i should install openrecovery. at first, to come to the "!" screen, camera screen + power did not work. i got there by pressing X + Power... but now i dont know how to access the menu where i should install update.zip..
please help!

November91 said:
okay nice tut, butttttt... im stuck at the part where i should install openrecovery. at first, to come to the "!" screen, camera screen + power did not work. i got there by pressing X + Power... but now i dont know how to access the menu where i should install update.zip..
please help!
Click to expand...
Click to collapse
okay i got it, im so sorry, i used the up button on the dpad

Also I did not see a launch 2.2.1 menu option. But I have currently launched the GOT open recov without an issue. I have rooted as well as many other things but didn't see that specific menu.

FoTwoZero said:
Also I did not see a launch 2.2.1 menu option. But I have currently launched the GOT open recov without an issue. I have rooted as well as many other things but didn't see that specific menu.
Click to expand...
Click to collapse
Silly question are you suing the newest version?
if you press down should on the open recovery menu it should be your sixth option, I have recorded a video about it this morning but its backwards I'm Going To Try And Have it Fixed and up today hopefully

For Tmobile USA ?
Which SBF for a german Mlestone on TMobile USA ? Will telus do fine ?

gbzygil said:
Which SBF for a german Mlestone on TMobile USA ? Will telus do fine ?
Click to expand...
Click to collapse
your Should use the rom depending on which band your phone has
German milestone should work with Europe ROM
under setting about phone check the Build Number
and look for that same number in here
http://and-developers.com/sbf:milestone
it will give us an idea where the phone is actually from

hi there. i have instaled europe GOT_RTEU_2_2_1FULL.zip version and now sometimes my touchscreen does not work. i mean that if i put the phone in standby and i try to unlock the touchscreen is not responding. i have to power off/on to make it work again. thanks in advance

Facebook app wont Synch with my contacts on first launch of FB app.
No other bugs so far...

Israel milestons should use retail europe?
Sent from my Milestone using XDA App

protozeloz said:
2. Google Chrome To Phone Not Working.
Click to expand...
Click to collapse
for me it's working perfectly. RTEU

Thank for this tutorial.
My milestone works fine so far, but 3g mobile hotspot and wireless tether not working.
Flash on milestone is so cool

something i don't get
I updated the firmware with RSD Lite, and used the one click tool, because:
whenever i try to hit update.zip i will get an errormessage, stating that these blocks couldn't be found -> ergo, the card not be mounted.
The HTC stuff i always managed, but this one is a mistery to me. Also, i did format fat32, pushed the stuff and then straight on bootup trying to hit the update.zip, without success.
I've read about how other people solved that problem, none of those approaches helped me.
Any hint is more than welcome.
2 bugs i've discovered so far: Battery drain like almost to be declared useless, some market apps "vanish" after installing them. I suppose those fixes would have done the job. I might attempt to use root explorer and execute the scripts like that, still I'd like to know why I'm unable to get the update.zip, resp. the G.O.T or any other "intelligent" boot menu installed.
Edit2: Even when installing the vulnerable sbf, i still get the error: E: Can't mount /dev/block/mmcblk0p1 ....

plvt_florian said:
hi there. i have instaled europe GOT_RTEU_2_2_1FULL.zip version and now sometimes my touchscreen does not work. i mean that if i put the phone in standby and i try to unlock the touchscreen is not responding. i have to power off/on to make it work again. thanks in advance
Click to expand...
Click to collapse
This could be for any reason try this
-Re download and re flash the files(do the whole thing again)
-there is an app i have called sd dual mount that makes my screen go crazy wen i connect the phone to an usb port, it was stable on 2.1 but now goes crazy on 2.2 check some of your apps to ensure they are not the ones responsible for this
hanslast said:
Facebook app wont Synch with my contacts on first launch of FB app.
No other bugs so far...
Click to expand...
Click to collapse
yurasts said:
Israel milestons should use retail europe?
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
you can try with the retail Europe,
evolucja said:
for me it's working perfectly. RTEU
Click to expand...
Click to collapse
can you tell me if you have an android ID? it should work when your device has it
czescdziadek said:
Thank for this tutorial.
My milestone works fine so far, but 3g mobile hotspot and wireless tether not working.
Flash on milestone is so cool
Click to expand...
Click to collapse
you can try and uninstall the wireless teeter app an have it reinstalled that should sort it out
MenoDev said:
I updated the firmware with RSD Lite, and used the one click tool, because:
whenever i try to hit update.zip i will get an errormessage, stating that these blocks couldn't be found -> ergo, the card not be mounted.
The HTC stuff i always managed, but this one is a mistery to me. Also, i did format fat32, pushed the stuff and then straight on bootup trying to hit the update.zip, without success.
I've read about how other people solved that problem, none of those approaches helped me.
Any hint is more than welcome.
2 bugs i've discovered so far: Battery drain like almost to be declared useless, some market apps "vanish" after installing them. I suppose those fixes would have done the job. I might attempt to use root explorer and execute the scripts like that, still I'd like to know why I'm unable to get the update.zip, resp. the G.O.T or any other "intelligent" boot menu installed.
Edit2: Even when installing the vulnerable sbf, i still get the error: E: Can't mount /dev/block/mmcblk0p1 ....
Click to expand...
Click to collapse
have you tried re downloading the files and doing all over again?, it could be a broken file
thats why i tell devs and chefs they should add an MD5 sum to their files larger than 20MB some errors are caused by just having downloaded broken files

Root phone from the GOT OR menu doesn't seem to actually root my phone (2.2.1 UK version)
Superuser whitelist app FCs instead of prompting to allow access. Have tried using Better Terminal for root access & also Wireless Tether app.
Anyone else getting this? Any ideas? Do any of the 1-click root apps still work with this build of Froyo? Which can we use?

aboycalledsu said:
Root phone from the GOT OR menu doesn't seem to actually root my phone (2.2.1 UK version)
Superuser whitelist app FCs instead of prompting to allow access. Have tried using Better Terminal for root access & also Wireless Tether app.
Anyone else getting this? Any ideas? Do any of the 1-click root apps still work with this build of Froyo? Which can we use?
Click to expand...
Click to collapse
i can confirm this. Simply trying it a second time worked for me

I'd like to add something for Linux users:
Using a virtual machine (virtualizing WinXP) that has USB support (eg Oracle VM VirtuaBox, since VirtualBox OSE does not support USB forwarding) can do this pretty easy. So no worries when trying this via a VM.

i try to instal GOT and its succesfull.
but why i install the application not bring to SD card
but still bring to internal memory
many said 2.2 automatic have app2sd
can you help me?
THX

m0jo said:
i can confirm this. Simply trying it a second time worked for me
Click to expand...
Click to collapse
not for me unfortunately!
weird...

From leaked 3.1 US to 3.0 WW?? Possible?

Hi guys. Well lol.. noobs just shouldnt play. =)
I was on WW 8.2.3.13 and updated to US 3.1. Now im having some problems with it. Been freezing and stuff.
So.. is it possible in anyway to go back to ww version so i can get th OTA version when it comes?
Found a link with the WW firmware. Tried to use it and boot with volume down but it wont work.
http://forum.xda-developers.com/showthread.php?t=1090291

what i had to do was download the 8239 update from asus put it in microsd/asus/update then i hade to rename the file to ww_epad-user-8.4.4.5.zip. you should see update avaliable in the bottom right hand corner of the taskbar then select update. Then ur tf should do the rest itself.

Worked great! thanx =)

I tried this, it isnt offering me an update, no exclamation mark either

wilx said:
I tried this, it isnt offering me an update, no exclamation mark either
Click to expand...
Click to collapse
Did you put the file in microsd/asus/update (the removable sd card not internal)

baseballfanz said:
Did you put the file in microsd/asus/update (the removable sd card not internal)
Click to expand...
Click to collapse
yes I have put it there. Wont it need to be called us to fool it I can put it over the top? I need to return to WW stock rom. Will this unroot it and remove CWM too?

I am on PRIMORDIAL v3.1 btw

Hi guys!
Ok, place the zip file on microsd card. Then turn the transformer off.
Hold power and volume down until it boots up and you see the small text.
Now hurry and press volume upp right away. That seem to force it to start the firmware. I used the ww epad 8.2.3.13.
I dont know if its ok when your rooted tho..

wilx said:
yes I have put it there. Wont it need to be called us to fool it I can put it over the top? I need to return to WW stock rom. Will this unroot it and remove CWM too?
Click to expand...
Click to collapse
Look here for unroot infos
http://forum.xda-developers.com/showthread.php?t=1093403&highlight=unroot

baseballfanz said:
Look here for unroot infos
http://forum.xda-developers.com/showthread.php?t=1093403&highlight=unroot
Click to expand...
Click to collapse
Does anyone have the blob from the leaked 3.1, as the file has been pulled off the forums
thanks

Hello,
It doesn't work for me, is there any other thing to do ?
What i've done :
1) Make a folder called ASUS/Update from the root of your microSD card
2) Drop the .zip in there, rename to 'US_epad-user-8.4.4.5.zip'
3) If you're doing this on the Transformer itself, eject and remount the SD card. If on your PC, just plug the card in.
4) Click the update notification, it'll start the updater on it's own.
Got the notification, started it but got the warning when reboot itself in recovery, no update.

Discusbass said:
Hi guys!
Ok, place the zip file on microsd card. Then turn the transformer off.
Hold power and volume down until it boots up and you see the small text.
Now hurry and press volume upp right away. That seem to force it to start the firmware. I used the ww epad 8.2.3.13.
I dont know if its ok when your rooted tho..
Click to expand...
Click to collapse
To quote meself. Try the above. I used 8.2.3.13 tho.

Do I have to rename it or anything else ?

Hi, i didnt do that. Just booted with power and volume down. Then as soon as the small text appear on left side i pressed volume up. That way it flashes it right away.

Ok, someone on a french forum find the solution that worked for me !
Download the last WW update on the Asus Website
Open the .zip file, in the ASUS/Update folder there will be another .zip file
Rename it EP101_SDUPDATE.zip and put it to the root of your external microSDcard
Boot in recovery (volume down and power) and then press volume up when it's asked in the upper left corner.
Let the update apply.
Once it boot, power off your tab, boot again in recovery, wait to have the wipe menu, confirme to wipe your device, let it wipe and reboot and that's ok !

gniouki said:
Ok, someone on a french forum find the solution that worked for me !
Download the last WW update on the Asus Website
Open the .zip file, in the ASUS/Update folder there will be another .zip file
Rename it EP101_SDUPDATE.zip and put it to the root of your external microSDcard
Boot in recovery (volume down and power) and then press volume up when it's asked in the upper left corner.
Let the update apply.
Once it boot, power off your tab, boot again in recovery, wait to have the wipe menu, confirme to wipe your device, let it wipe and reboot and that's ok !
Click to expand...
Click to collapse
Sounds like you were using the wrong .zip file to begin with. There were a few going around. One was a zip with a zip in it, which you need to do what you did, another simply was that inner zip file. If you named the inner zip to US_epad-user-8.4.4.5.zip and followed the directions as posted previously it probably would've worked as well. Just looks like you had one copy of the zip and the instructions for the other

Was on TW_epad_user_8239 and updated to the leak 3.1 with US firmware.
managed to downgrade (all the way back to TW_epad_user_82313) and TF auto prompt me upgrade to TW_epad_user_8239 (with numerous reset)
However, there are many android.process* crashes...
*acore
*media
*gmail...
Still no OTA for 3.1 update

You have to wipe

gniouki said:
You have to wipe
Click to expand...
Click to collapse
??factory reset ??

silly me..just do the vol down again...thanks

How To Root Stock Droid Charge FP5

Typed this up for a friend I thought it would be nice to share with any new droid charge owners looking for a guide to how to root FP5.
Major Credit goes to:
trparky
I learned how to do this from his website:
Tom's Android Knowledge Base -- Offline
Root Stock Droid Charge FP5:
First download this tool:
MD5-Checker
It will be used to run an md5 check on the files before they are flashed to your phone.
Next download this:
http://www.toms-world.org/android/download/ftp/ODIN3+v.1.82.exe
MD5: 3D8E8240F2A4F66E63A6622F65C7C909
This is Odin the *Windows* program used to interact with your phone.
Next download this:
0817_charge_recovery.tar.md5
MD5: 925D33E1AD40518AAC09B179DFDB0F76
This is CWM your main interface that will be used when loading roms, etc
Finally download this:
http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.2-RC3-arm-signed.zip
MD5: 6462AC14CD38ED7C539CE3E29A6B92A8
This is the file that you flash to root your phone.
Run MD5 Tool to make sure all the MD5's match the previous MD5 checksum!
1. Open the MD5 program
2. Select create an MD5 checksum
3. Browse to the file that needs to be checked
4. Verify that the MD5 created matches the ones above (if they don't re-download)
5. Repeat for all files
Now you have all the files downloaded to root your phone. The steps to root stock droid charge are as follows:
Copy files to SD card
1. On the home screen select settings
2. Select USB setting and turn on USB debugging
3. Plug in your phone to your computer (give it a min to install drivers)
4. Pull down your top bar and select "Connect storage to PC" button
5. Create a new folder called Downloads
6. Drag the Superuser-3.2-RC3-arm-signed.zip file into the Downloads folder that you just created
7. Hit the "Disconnect from storage PC" button on your phone
CWM
8. Turn off your phone
9. Once the phone is completely off take out the battery
10. Open Odin then while holding the volume button down plug your phone into the computer
11. When you get the Yellow triangle with android in it your in download mode, plug battery back in.
12. On the left under option uncheck Auto Reboot (you and leave F. Reset Time checked)
13. Once Odin picks up your phone (a yellow com box will show up) click on PDA and browse to the CWM file and select it
14. Click start (it should be a quick flash)
15. Once the flash says successful take out battery and unplug phone
Superuser
16. Put your battery back in the phone
17. Hold down volume up and home (button on bottom of phone that has an up arrow) and the power button
18. Once you see the Samsung logo release the power button but continue to hold down the volume up and home button down
19. Once your phone has booted into CWM(there will be a banana at the bottom of the screen) arrow down with the volume button and select mounts and storage with the power button
20. Arrow down to the option that says mount system and use the power button to select it
21. Arrow down and select go back
22. Arrow down and select install zip from sdcard
23. Select choose zip from sdcard
24. Arrow down and select Downloads
25. Select the file that says Superuser-3.2-RC3-arm-signed.zip
26. Arrow down and select Yes - Install Superuser-3.2-RC3-arm-signed.zip
27. Select Go Back
28. Select Go Back
29. Select reboot system now
Let the phone boot up go the market and install root check it should say you’re rooted. Then your all done your phone has root that wasn't so hard was it
If you still are unsure or run into any problems feel free to send me a pm I would be happy to help you through the process via skype.

The link to the recovery file you mentioned in this post points to http://www.imnuts.org/downloads/charge/1209_charge_recovery.tar.md5.
Please update your link.
I no longer have permission to distribute the CWM file that imnuts made. The file has also been removed from the file system path that the web server has access to, meaning that it's outside of the public_html folder.
I do realize that some people still want the older 4.0.1.4 version of CWM but you will have to ask Imnuts for that file. Like I said, I do not have permission to distribute that file anymore.

trparky said:
The link to the recovery file you mentioned in this post points to http://www.imnuts.org/downloads/charge/1209_charge_recovery.tar.md5.
Please update your link.
I no longer have permission to distribute the CWM file that imnuts made. The file has also been removed from the file system path that the web server has access to, meaning that it's outside of the public_html folder.
I do realize that some people still want the older 4.0.1.4 version of CWM but you will have to ask Imnuts for that file. Like I said, I do not have permission to distribute that file anymore.
Click to expand...
Click to collapse
Sure thing just updated post thank you for making me aware

I cant get the md5 for match for this file. I've downloaded over and over and it still doesnt match. what do i need to do?
"Next download this:
MD5: E9A01D028362387332C46F5FB32C23A6
This is CWM your main interface that will be used when loading roms, etc"
The others matched with no problem.
Help!

The correct MD5 signature for that file is 9C41377FDCDB341310BC8C25D0794D6D.

A one-step ODIN using dwitherell's deodexed odin rooted stock file as described here is so much simpler, IMO.

how to get the Root? There is a method in one click.

trparky said:
The correct MD5 signature for that file is 9C41377FDCDB341310BC8C25D0794D6D.
Click to expand...
Click to collapse
Thanks I have the OP fixed now

KapTmaH said:
how to get the Root? There is a method in one click.
Click to expand...
Click to collapse
Didnt think there was a one click for our device? Didnt see it listed.

No, there isn't a "one-click-root" for the Droid Charge.
Sent from my SCH-I510 using Tapatalk

I'm pretty sure there is no one click root for our DC. Im not a fan of one click root learning how to root manually will get you comfortable with flashing with Odin and CWM which you will need to flash roms, kernels, etc.
Sent from my SCH-I510 using xda premium

Will this root method wipe all my data? I dont want to lose my data...

heathro1281 said:
Will this root method wipe all my data? I dont want to lose my data...
Click to expand...
Click to collapse
no this method will not wipe any data
Sent from my SCH-I510 using xda premium

Props to you ztkryan!!
Spent hours trying to find something simple to explain this process. There are tons of people trying to explain this but nobody can seem to do it in a step by step list.
Simple, clear and concise ;D

I did all the following steps as stated, and when I run Root Checker, it states "Sorry, you do not have proper root access."
Am I the only one receiving this error? Does anyone know what I am doing wrong perhaps?

slapshot591 said:
I did all the following steps as stated, and when I run Root Checker, it states "Sorry, you do not have proper root access."
Am I the only one receiving this error? Does anyone know what I am doing wrong perhaps?
Click to expand...
Click to collapse
I had that problem one time to fix it make sure you mount system before reflashing the superuser.apk in cwm
Sent from my SCH-I510 using xda premium

ztkryan said:
I had that problem one time to fix it make sure you mount system before reflashing the superuser.apk in cwm
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
Giving this a try right now, I will return with results. Thanks again.
EDIT: Mounting System fixed my issue. I really appreciate your response ztkryan.

slapshot591 said:
Giving this a try right now, I will return with results. Thanks again.
EDIT: Mounting System fixed my issue. I really appreciate your response ztkryan.
Click to expand...
Click to collapse
just an FYI if you rebooted your phone you will have to install cwm again (stock kernel overwrites recovey to stock recovery on boot)
Sent from my SCH-I510 using xda premium

I must have missed something, I have root and that seems to be working fine but when I try to get back into CWM to do a backup by holding the up volume + power & home it appears to take me into a stock recovery. Did I do something wrong?

Rodhargis said:
I must have missed something, I have root and that seems to be working fine but when I try to get back into CWM to do a backup by holding the up volume + power & home it appears to take me into a stock recovery. Did I do something wrong?
Click to expand...
Click to collapse
You didn't do anything wrong to make cwm stick you have to flash a custom kernel the stock kernel overwrites custom recovery on boot
Sent from my SCH-I510 using xda premium

Asus The New PadFone Infinity (A86) aka PadFone Infinity 2 Thread

Hi,
Since I didn't find a thread for The New PadFone Infinity (A86) aka PadFone Infinity 2, decided to create this thread.
Hopefully this top device gets noticed by developers.

Any MOD for audio? Low handset speaker volume?
As you might noticed, the speaker volume (notifications, ringtones, etc.) of NPFI handset is pretty low even when all volume sliders are maxed out and audio wizard is set to "Music".
I have a rooted device and installed Alsa Mixer from Play Store and tweaked the parameter "RX7 Digital Volume" from within the app. Changed default value of 85 to 100 and was pleased to get a noticeably louder speaker volume. Problem is that the value resets almost instantly and volume level gets back to its default value. Probably because Alsa Mixer installs its own audio driver (alsa amixer) which uses a separate system for assigning values and there is a protection system in place by Asus I think.
I also played with parameters in files below (residing in /system/etc/snd_soc_msm) - tweaked the RX7, RX1, RX2, etc...
snd_soc_msm_Taiko
snd_soc_apq_Taiko_DB
snd_soc_msm_Taiko_CDP
snd_soc_msm_Taiko_Fluid
snd_soc_msm_Taiko_Liquid
saved and reboot, but it didn't make a difference. So anyone has any idea to share?
P. S. As far as I know the audio engine for NPFI is designed by Wave and is called MaxxAudio, Is it possible that it has something to do with that?

Thank you for making much needed forum.
Hopefully soon there will be gathered all the essentials.
---------- Post added at 01:21 PM ---------- Previous post was at 12:41 PM ----------
Hello, friends!
There is good news.
After phone repair service center ASUS found a new firmware WW_A86-10.12.3.116-20140116.
Our friend was surprised at first, but then found the firmware in the phone memory. )))
Keep greetings from Russia.
Thanks Russian carelessness...
https://drive.google.com/file/d/0B8FPN1MGNiJcbWVoQ2dnRVFGaEE/edit?usp=sharing
On the site it is not!
changes:
1. Kernel (16.01.2014)
2. Camera + gadgets
3. Test more ...
PS
Let there be a also here and UL-A86-WW-10123111:
https://drive.google.com/file/d/0B8FPN1MGNiJcWnZJZFhuNGUxRVk/edit?usp=sharing
:highfive:

AlexHer said:
Thank you for making much needed forum.
Hopefully soon there will be gathered all the essentials.
---------- Post added at 01:21 PM ---------- Previous post was at 12:41 PM ----------
Hello, friends!
There is good news.
After phone repair service center ASUS found a new firmware WW_A86-10.12.3.116-20140116.
Our friend was surprised at first, but then found the firmware in the phone memory. )))
Keep greetings from Russia.
Thanks Russian carelessness...
https://drive.google.com/file/d/0B8FPN1MGNiJcbWVoQ2dnRVFGaEE/edit?usp=sharing
On the site it is not!
changes:
1. Kernel (16.01.2014)
2. Camera + gadgets
3. Test more ...
PS
Let there be a also here and UL-A86-WW-10123111:
https://drive.google.com/file/d/0B8FPN1MGNiJcWnZJZFhuNGUxRVk/edit?usp=sharing
:highfive:
Click to expand...
Click to collapse
hi there, thanks for the update :good:

Hmm nothing major...
I wonder why the New Padfone Infinity has to wait the longest to get the latest version of Android...

Kingoapp
Kingoapp worked ok for me for root.
I had to reboot phone and a PC after a driver install, but that's ok.
Is there a sub forum for PadFones? Would be nice to have a place for this stuff.
There are some other places for PFs.
http://padfoneclub.com/pl/forum/forum.php

ilmawi said:
Kingoapp worked ok for me for root.
I had to reboot phone and a PC after a driver install, but that's ok.
Is there a sub forum for PadFones? Would be nice to have a place for this stuff.
There are some other places for PFs.
http://padfoneclub.com/pl/forum/forum.php
Click to expand...
Click to collapse
This is not a place for advertisement for forums or products, especially for suspicious applications such as "kingo" root.

the button beside home button is not working
my padfone is asus padfone t004 .. before i recently updated, everything was fine. After i updated, (version 4.2.2, not sure if it was really updated or not) something went wrong.. The phone is all fine, but when i insert it into the pad, the button beside the home button on the right is not working (sorry i dont know what they call the button as). anyone has this issue? or already fixed this issue? please help !

simmonghuat said:
my padfone is asus padfone t004 .. before i recently updated, everything was fine. After i updated, (version 4.2.2, not sure if it was really updated or not) something went wrong.. The phone is all fine, but when i insert it into the pad, the button beside the home button on the right is not working (sorry i dont know what they call the button as). anyone has this issue? or already fixed this issue? please help !
Click to expand...
Click to collapse
The new update 10.12.3.130 has a bug. Apparently Asus is working to fix the bug. Don't panic. Hopefully a bug fix will be released soon.

Now I wonder how ASUS ZenFone 6 works...

Still waiting on that 130 fix... wondering if there just ignoring it and going to wait until ZenUI is ready

djleez82 said:
Still waiting on that 130 fix... wondering if there just ignoring it and going to wait until ZenUI is ready
Click to expand...
Click to collapse
I must say I share your doubt. Possibly they are working on KitKat for NPFI, and ignoring the fix for now. Disappointing customer support management!

Its a shame that theres no developer support for the A86. Such a great device with no custom roms

KIT KAT Released for NPFI
Finally Asus released firmware update 11.2.5.12 for NPFI which updates its android version to 4.4.2
Download links are available at Support section of your device in Asus website.

Yes, I downloaded it and had mine updated, mine you all, 4.4.x has a known issue, that is all 3rd party apps cannot write to external SD, unless you root it and apply the fix, then either leave it as rooted or unroot it again.

Root 4.4.2 - Build: 11.2.5.26 (TW)
Hi
Just got one of these and it has recently updated from .20 to .26 and now I cant root it? Any ideas?
Is there a way of downgrading back to .20?
Thanks

Check out this thread. Has all info for rooting on all firmwares
http://www.padfoneclub.com/pl/forum/forum_viewtopic.php?15727
I achieved root with RootÖúÊÖ. I just uninstallede kingroot and used supersu instead

dagstar said:
Hi
Just got one of these and it has recently updated from .20 to .26 and now I cant root it? Any ideas?
Is there a way of downgrading back to .20?
Thanks
Click to expand...
Click to collapse
djleez82 said:
Check out this thread. Has all info for rooting on all firmwares
http://www.padfoneclub.com/pl/forum/forum_viewtopic.php?15727
I achieved root with RootÖúÊÖ. I just uninstallede kingroot and used supersu instead
Click to expand...
Click to collapse
I'm with .26 WW and still can't reach root.
@djleez82 can you explain briefly how this chinese tool works? I mean, how can I reach root with that. Thanks!

Rooting Firmware 12.4.0.59 - Android 5.0.2 - A86
This post is copied from my own thread in padfoneclub.com so there is no case of stealing
If you want to copy this post on other forums please do not forget to give due credits to original poster.
Disclaimer! The procedure described below has the potential of rendering your phone useless if not followed properly. I DO NOT ACCEPT ANY RESPONSIBILITY WHAT SO EVER, IF YOU BRICKED YOUR PHONE WHILE PERFORMING THIS PROCEDURE. PROCEED AT OWN RISK!
This method is tested by downgrading firmware 12.4.0.59 to 11.2.5.26, which in turn needs a factory reset/ wipe data/ cache/ afterwards. Before anything else back up your important data (ie. contacts, messages, app data, etc) to some place safe outside your phone. ORIGINAL RECOVERY of your phone will be replaced by TWRP recovery
Preparation: (BEFORE ANYTHING REMOVE YOUR SIM CARD AND MICRO SD)
1. You must have USB debugging enabled, allow mock locations (developer options menu in settings)
2. You must have UNKNOWN SOURCES enabled (security menu in settings)
3. To be on the safe side I recommend you disable VERIFY APPS OVER USB, in developer options menu. You can re enable everything after the job is done.
4. You need to download firmware 11.2.5.26, and 12.4.0.59 according to your phone SKU and save it on your computer.
5. Download WINRAR or any archiving software which is able to modify zip files and install it on your computer.
6. Download unofficial TWRP ver 2.7.1.1 ONLY from this link, and save to your computer
7. Download BETA SUPER SU 2.49 from here, and save it to your computer.
8. If you are on firmware, 11.2.5.26, or 11.2.5.30 and rooted you are half way done, if not either you have to upgrade or downgrade depending on the firmware that now you are on. For example if you already upgraded to 12.4.0.59 you need to downgrade first and root, then proceed. There's a thread in padfoneclub which comprehensively discusses way to root Kit Kat firmware so I skip to just explaining downgrade procedure from 12.4.0.59.
9. To downgrade from 12.4.0.59 to 11.2.5.26, you do it in the usual way from recovery except you need to factory reset/wipe data/ wipe cache via recovery beforehand. REMEMBER TO REMOVE YOUR MICRO SD FIRST AND THEN WIPE OR YOU MAY LOSE YOUR DATA ON MICRO SD AS WELL! After wipe, reboot your phone and place the 11.2.5.26 zip in the root of your sd card by transferring downloaded zip from your PC.
10. Downgrade by choosing "apply update from sd card menu item" in recovery and selecting the zip file you just transferred to your phone. Remember to have at least 70% charge on your battery before downgrade or upgrade.
11. After the downgrade process completes your phone reboots, if it is stuck in ASUS logo for a long time (more than 10 min), switch off your phone by pressing and holding power button. Then reboot into recovery again do another factory reset / wipe data / wipe cache and reboot again. Now everything will be OK and your phone boots to initial KK setup. proceed until you are on the home screen. reboot your phone again.
12. make sure that items explained in step 1-3 are checked and unchecked accordingly.
13. Root your phone by your desired method.
NOW THE IMPORTANT STEPS TO UPGRADE TO A ROOTED ANDROID L 12.4.0.59
1. On your PC replace the "recovery.img" in the zip file for Firmware 12.4.0.59 with TWRP recovery that you just downloaded. Both have the same name and it is a simple case of drag and drop into zip file.
2. Now you have 3 important file:
- The modified 12.4.0.59
- The TWRP recovery you downloaded (recovery.img)
- The beta Super SU 2.49
Copy all 3 file to the root of your sd card in your phone.
3. Install "Terminal Emulator" from Play Store, open the terminal and give it root permissions if needed.
4. Type su
5. Then type
Code:
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery bs=4096; sync;
(you can copy paste to rule out any typing mistake)
6. After executing the command a number of bytes transfers and the results will display in terminal window. close the window and reboot into recovery as usual, except this time you have TWRP recovery instead of original Asus recovery.
7. Go to "Install" button and select the modified 12.4.0.59 from your sdcard, uncheck "zip file signature verification" then "add more zips" and select beta super su 2.49. zip as well, then swipe to confirm flash.
8. If everything goes according to plan your phone will be flashed with the new firmware and rooted at the same time.
9. Reboot and enjoy!
10. I tried this method on my phone and it all went smoothly, but in case you get errors, you have to figure it out yourself, I WONT BE ABLE TO HELP YOU! AGAIN BE CAUTIOUS, FOLLOW STEPS EXACTLY AS DESCRIBED AND PROCEED AT OWN RISK.