Database Info

Reverting Back to Stock Rom in Honor 4X(MSM8916)

Hi this is a thread for new users to revert back to stock rom in huawei Honor 4x from their custom roms .
Follow these steps only if have unlocked your bootloader and had custom rom installed already. Of course you must have already installed custom recovery (twrp or cwm). This guide will also allow you to revert back to stock huawei recovery.
Step 1 : Download the ROM Package from the link~1GB)
http://www.huaweidevice.co.in/Downloads/Cherry-L04-V100R001C900B126.rar
Step2 : Extract using Winrar. (Inside dload folder you will find Update.app file)
Step3 :Now Download Huawei Update extractor and install
http://cn.club.vmall.com/thread-3239393-1-1.html
Step4 : Now Run the huawei update extractor and point to the update.app file.Now the contents of the update.app file will be displayed.
Select the Boot.img,recovery.img and System.img alone and select extract by rightclicking it.
Step5:Now we need the adb tool kit, .(~10mb)
https://drive.google.com/file/d/0B8CpdMmTiXaVdS1Eam5RY3BVR3c/view?pli=1
Step6:
Install and configure the Adb. Make sure once installed connect the device to usb and press vol down + Power button together.It will enter fastboot mode. Make sure phone is unlocked.
Step7:Now copy the extracted recovery.img,system.img and boot. img to the adb root folder which should be in c:\adb\.
Step8: Now in terminal window of adb , type these
1. "adb devices" -Displays some id of your device which makes sure your device is connected.
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Step9:Now all is flashed.
"adb reboot" - Reboots your device.
Step10:Wait for few mins and your phone reboots into stock emui rom. Now if you want the second emui update. Download from hihonour.in and flash the downloaded zip with stock recovery.
Credits
All the software makers.
All the Xda members,Xda team ,Xda Posts.
Important Note
I'm not responsible for your phone getting bricked or whatever things could happen to your Device.
I am always ready to support for Huawei Honor 4x custom rom developments. PLs lets join together and make many custom roms for our device.

put dload in sdcard
press volume +,-,power
everything will start

Hi I suppose only if we have stock recovery , it will work ?!.
Sent from my Che1-L04 using XDA Free mobile app

awesome
I think you've done great job here
Thank you

after flashing the old firmware's files i got no boot and i dont mean bootloop i mean phone is not booting at all just stopped at the first screen
is there any solution

I did everything you mentioned but in adb devices its showing No devices found. I forgot to turn on usb debugging. What to do now. Its struck on the window Fastboot and rescue mode.
---------- Post added at 02:11 PM ---------- Previous post was at 02:04 PM ----------
Hey Huawei. I contacted you earlier for the bootloader unlock key and got the same from you which I would Like to thank yOu for same. After unlocking bootloader I installed MIUI ROM on my Honor 4x (Che1-l04) and it ran smoothly. But I didn't like it much and wanted to change back to my stock ROM. I tried to Install your Honor 4x Android L. I extracted the ZIP file using Huawei Update extractor and did the steps mentioned by XDA Developers. Here- http://forum.xda-developers.com/android/development/reverting-to-stock-rom-honor-4xmsm8916-t3168732
After doing All steps While doing ''adb reboot'' Its saying DEVICE NOT FOUND in cmd. I Found that i forgot to turn on USB debugging. But now my device is struck on FASTBOOT AND RESCUE MODE.(PHONE UNLOCKED).I am not able to tur it on. I tried many steps to show my device but failed. Please help me regarding this. I will be highly thankful to you

Beware!
This tutorial seems to be written very sloppy and doesn't work at all. (at least not on a CHE2-11)
After entering fastboot mode no adb commands will work.
"adb boot" must be replaced by fastboot reboot.
After applying your changes however my pone hangs at the first screen (showing "honor")

I've the same problem than you tosho1. And the adb commands not work in bootloader/fastboot mode. Only in recovery and system

some issuses
when i extract the recovery, boot and system.img files from the UPDATE.APP file with the Update Extractor tool, it creates 6 files instead of 3:
1. BOOT.img
2. BOOT.img.header
3. RECOVERY.img
4. RECOVERY.img.header
5. SYSTEM.img
6. SYSTEM.img.header
What is the purpose of the file which ends with ".header" extension ?

praveen1988 said:
Hi this is a thread for new users to revert back to stock rom in huawei Honor 4x from their custom roms .
Follow these steps only if have unlocked your bootloader and had custom rom installed already. Of course you must have already installed custom recovery (twrp or cwm). This guide will also allow you to revert back to stock huawei recovery.
Step 1 : Download the ROM Package from the link~1GB)
http://www.huaweidevice.co.in/Downloads/Cherry-L04-V100R001C900B126.rar
Step2 : Extract using Winrar. (Inside dload folder you will find Update.app file)
Step3 :Now Download Huawei Update extractor and install
http://cn.club.vmall.com/thread-3239393-1-1.html
Step4 : Now Run the huawei update extractor and point to the update.app file.Now the contents of the update.app file will be displayed.
Select the Boot.img,recovery.img and System.img alone and select extract by rightclicking it.
Step5:Now we need the adb tool kit, .(~10mb)
https://drive.google.com/file/d/0B8CpdMmTiXaVdS1Eam5RY3BVR3c/view?pli=1
Step6:
Install and configure the Adb. Make sure once installed connect the device to usb and press vol down + Power button together.It will enter fastboot mode. Make sure phone is unlocked.
Step7:Now copy the extracted recovery.img,system.img and boot. img to the adb root folder which should be in c:\adb\.
Step8: Now in terminal window of adb , type these
1. "adb devices" -Displays some id of your device which makes sure your device is connected.
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Step9:Now all is flashed.
"adb reboot" - Reboots your device.
Step10:Wait for few mins and your phone reboots into stock emui rom. Now if you want the second emui update. Download from hihonour.in and flash the downloaded zip with stock recovery.
Credits
All the software makers.
All the Xda members,Xda team ,Xda Posts.
Important Note
I'm not responsible for your phone getting bricked or whatever things could happen to your Device.
I am always ready to support for Huawei Honor 4x custom rom developments. PLs lets join together and make many custom roms for our device.
Click to expand...
Click to collapse
In case, anyone wants to know how to downgrade from Marshmallow to kitkat on honor 4x. Refer this thread: http://forum.xda-developers.com/honor-4x/help/provide-downgrade-procedure-emui-4-0-to-t3409717/page2
Solution is given on Page 2. Also, you cannot downgrade to 4.4.4 directly from 6.0.1. You need to go from 6.0 to 5.1 and then 4.4.4. For details refer the link.

In honor 4c i unloked bootloader and rooted my device no twrp installed when i flashed twrp file i struck at honor logo......
Can anyone resolve it plz......

pls help!!
does this work on locked bootloader?? any posssibility? i flashed twrp and it ended in loop gained root access throuh king root what to do??:crying:

pl suggest I am facing the same problem, error shows while flashing that ( remote data is too large)- I have updated the fastboot binaries but no success... Help me out pLease

i am not able to flash recovery and boot,getting a error "remote:size too large".What to do??

not working
Huawei update extractor stucks while extraction boot.img
any fix

Does not work
dianlujitao said:
put dload in sdcard
press volume +,-,power
everything will start
Click to expand...
Click to collapse
It does not work in my case. Could you please help.

praveen1988 said:
Step8: Now in terminal window of adb , type these
1. "adb devices" -Displays some id of your device which makes sure your device is connected.
2. "Fastboot Flash recovery recovery.img" - Flashes stock recovery
3. "fastboot flash system system.img" - Replaces your custom rom with stock rom
4."Fastboot flash boot boot.img" - Flashes boot partition which is need to boot stock rom.
Click to expand...
Click to collapse
It actually worked for me ( I messed up with custo roms). Now i'm back to stock. Thanks!
P.S. Honor 6x

dianlujitao said:
put dload in sdcard
press volume +,-,power
everything will start
Click to expand...
Click to collapse
i stuck on the huawei recovery mode around 90% . Wait for 3 hours and more also stuck on 90%.
Please help

How can be unlock honor che-L04 if there is invalid imei in the phone
Sent from my Redmi 3S using Tapatalk
---------- Post added at 03:49 PM ---------- Previous post was at 03:40 PM ----------
How to unlock honor Che1-L04 if there is no imei in stock rom installed in phone by huawei smartphone multi-download software v1002
Sent from my Redmi 3S using Tapatalk

I cant install the adb tool ki. it keeps closing

QMobile Noir E2 Root Method (No Bootloader Unlock Method Added)

Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
fastboot reboot
Click to expand...
Click to collapse
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!ewVSyI7B!xAvgnzYORGFCtXLyxerNt9hx8Awz-5hNO2vlz5uabfo
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.

Reserved
1) SDCard works fine with recovery
2) Found identical device . Panasonic Eluga A3
3) Will test Recovery of Eluga A3 soon :fingers-crossed:

i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"

bluedrago said:
i have done all the steps you mentioned ..but it stucks on applying update from sd card...
USB-OTG is not showing ...when i try to update through sd card ,,,IT says ""Installation aborted"
Click to expand...
Click to collapse
The Stock System of Noir E2 is Encrypted ..... all nougat based systems are encrypted
You need to backup all data in internal storage to your pc and go to TWRP and Go to Wipe and CLICK ON FORMAT DATA BUTTON
that will remove encryption and allow you to flash zip files

Do you have any custom rom for qmobile e2 like Cm14 rom or miui rom or any other
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.

Aqdas Iftikhar said:
Bro i want another rom which can be flashed into the qmobile e2.The stock firmware is not good and it lags.
Also i don't like its stock firmware user interface.
So is there any way to flash another rom in it.
I searched alot about it but can't find any rom which can be flashed into it
And u r last hope.
I hope u will have any solution.:good:
Reply must. I am waiting.
Click to expand...
Click to collapse
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply

Yes I Want Bro. Also share the method to port/Flash it. And have u tested it.
andromodgod said:
All I can share with you is the stock rom of Panasonic Eluga A3. If you want that do reply
Click to expand...
Click to collapse
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.

Aqdas Iftikhar said:
Also tell me if everything is working on Panasonic rom like fingerprint sensor and sdcard etc.
I have read the specs of Panasonic eluga a3 and gsmarena shows that there is no fingerprint sensor in Panasonic eluga a3. So plz tell me that everything is working correctly or there is some bugs.
And share me the method to port/flash that rom.
I will me thankful to you.
Click to expand...
Click to collapse
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.

I got an error in sp flash tool and also Non removable battery problem
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
andromodgod said:
Everything works .... You will have to flash the OS via SP Flash tools so make backup of everything in your internal storage ... Also it comes with some preinstalled apps so you will have to delete those .... But over all it's a much more optimized system than the QMobile OS.
https://drive.google.com/uc?id=0B4KUp-X2vfc3aVpiQUdiQ293OGM&export=download
Download from above ... Flash using SP Flash tools and after setting phone up there will be a small update ... Install that and then flash twrp and install magisk and if you want install Xposed as well.
Enjoy.
Click to expand...
Click to collapse
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.

Aqdas Iftikhar said:
The error shown is given below:-
{Initializing scatter file failed. Please check the name of scatter file which you load is legal.}
Also it select only two files:-
1- logo
2- system
Plzz fix this problem and can u plz send me a video tutorial because my device has non removable battery and also not get detected in sp flash tool.
Thanks
---------- Post added at 03:05 PM ---------- Previous post was at 02:30 PM ----------
i old version of sp flash tool the file opens with an error
i tried new version 5.1524.00 but in that version the file even doesnt loads.'
plzz help me i am tired of the bugs which r present in qmobile os.
I will be very very thankful to u.
Click to expand...
Click to collapse
Download Latest Version of SP Flash tool from http://spflashtool.com
Then extract the Downloaded OS into a separate folder on your desktop.
Then open SPFlash tools and Switch off your device ...
Load the scatter file on to SPFlash tolls that you extracted ... It will be in the OS folder with all the .img files.
Press the start button.
Then connect your device to the PC ... Remember device must be switched off properly.
Flashing should begin automatically.

Many Thanks bro I have flashed the ROM successfully
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.

Aqdas Iftikhar said:
Thanks for ur help.
After alot of stuggle and with your help I have successfully flashed Panasonic rom.
U said that there will be an update but I checked and it says the software is latest and no upset available.
Why in my phone there is no update??.
Click to expand...
Click to collapse
i forgot ... the link that i shared had the lastest update already .

I tried to root my device and in fast boot i encountered a problem
andromodgod said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Code:
adb reboot bootloader
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Code:
fastboot oem unlock
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Code:
fastboot flash recovery **DRAG&DROP RECOVERY.IMG HERE**
Press enter
then type
Code:
fastboot reboot
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Code:
adb reboot recovery
and Press Enter
Phone should boot into TWRP
Disconnect from PC
Connect USB-OTG To Phone.
go to Mount and click on Select Storage and Choose USB-OTG
now go to Install and Choose The SUPERSU Update zip file and flash it.
AND REBOOT.
****************************************************************************************
Phone will reboot and during mid boot it will reboot again .... that is totally normal.
and Now Your Device is ROOTED Congrats
****************************************************************************************
If any dev wants to fix the recovery he can do it but give credit where its due .
External SDCard Works and This Recovery might as well work with Panasonic Eluga A3 as they both are identical copies of each other ...
************************************************************************************************************
Rooting With Locked Bootloader.
Pre-Requisites :
1 ) Locked Bootloader
2 ) SP FlashTool --> Download HERE
3 ) TWRP From Above or HERE
4 ) Modified Scatter File from HERE
5 ) Magisk Zip file and Magisk Manager and Keep them in SDCARD OR USB with OTG
******************************************************************************************************************
Flashing Stuff Guide.
Turn off Your Device
Download and Extract the SP Tool to some directory
Download the TWRP and Scatter file and keep them in a folder together
Rename the twrp file to recovery.img
Open SP Flash tool and Load the scatter file.
Below That set the Download Mode to Download Only, Not Firmware upgrade or Format + Download.
Then press the Green Download Button.
OR SEE HERE
Connect the usb cable to your mobile phone and not to the pc
Press and Hold the vol up and vol Down buttons simultaneously and connect the usb cable to the PC.
The Flashtool should Detect your device and start flashing the recovery img.
After completion device should be powered off.
Press and hold the vol UP button while powering up the device to boot into twrp.
In Twrp go to install and change storage to sdcard and locate the magisk zip file and install it.
after installation reboot to system. and install the magisk manager app
Congrats You have successfully rooted your device with a locked bootloader.:laugh::laugh:
Now with magisk you can install Xposed and various other mods systemlessly.
Enjoy
*************************************************************************
For and further inquiries comment below.
Click to expand...
Click to collapse
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom

Aqdas Iftikhar said:
Backstory:
I Bought this device from Pakistan for Rs15500 or 147 US Dollars. It was a relatively cheap and good device and like all QMobile Devices i thought it would have a counterpart in the Micromax Community like my old phone Qmobile Noir A10 and as it is known in India as Micromax A110.
Sadly i was mistaken. i scoured the net for any device resembling mine and none were found ... well none that had Android 7 or the same chip set.
SO Last Night i Sat Down and Worked and Somehow i was able to port a semi-working TWRP Recovery for This Device :fingers-crossed:
It Doesn't currently mount the Internal Storage... External SDCARD WORKS :good:
AND NOW THE GUIDE TO ROOT.
****************************************************************************************
Pre-Requisites.
Unlocked Bootloader
ADB ON PC
USB With OTG Support or USB AND OTG CABLE
PATIENCE
****************************************************************************************
To Unlock Bootloader.
WARNING UNLOCKING BOOTLOADER WILL WIPE DEVICE SO BACK IT UP
Go TO Developer Options
Scroll Down to OEM UNLOCKING and Check it
Connect phone to PC
Then Open CMD and TYPE
Wait til it boots into fastboot mode [ Black screen with tiny text at bottom]
Then Type
Press enter and Follow guide on Phone screen
After Completion of Unlocking type
Boot into Device and Set it up
Then Download Recovery.img from https://mega.nz/#!KgMVgDwA!ImQoiSBUf9GitR5_K5Dxlzq01P0V4oqsZu5K2-RjZNQ
****************************************************************************************
FLASHING RECOVERY
Reboot back into bootloader and type
Press enter
then type
****************************************************************************************
ROOTING
Go to http://www.supersu.com/download and Download the Latest zip file.
Place the zip file on a usb.
Connect Phone to PC
Type
Bro when i booted into fastboot after executing command to unlock bootloader in mobile it says to press volume up key and i pressed it again and again but no response but when i press volume down key it executes instantly and volume down key purpose is to not unlock bootloader.
plzz help me.
also in locked boot loader method sp flash tool says (enable dram failed) and thus i cannot flash recovery
.
plzzz help me out.
i have installed panasonic eluga a3 rom
Click to expand...
Click to collapse
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though ??

andromodgod said:
After pressing volume up.key few times ... Press the home button . Phone thinks that vol up is home button ... Dunno why that is though
Click to expand...
Click to collapse
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:

Aqdas Iftikhar said:
bro i have unlocked bootloader succesfully.
but when i give command to flash recovery the adb show tranfering and then ok.
but after reboot when i give command to reboot to recovery it boots into panasonic stock recovery.
plzz help me.
and also tell me why sp flash tool is giving me (failed to enable dram error) and give solution.
i hope u will have solution of these matter.
Many Thanks.:fingers-crossed::good:
Click to expand...
Click to collapse
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.

I have rooted my device but cannot boot into system twrp opens again and again.
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro after rooting my device i restarted my device but twrp recovery boots again and again and not boot the system.
in twrp i selected to reboot to system but it open twrp recovery again.
i wipe the data and cache but still twrp is openeing.
plzz help me i even cannot acces my device in this situation.
Reply fast.
---------- Post added at 05:46 AM ---------- Previous post was at 05:29 AM ----------
andromodgod said:
After flashing recovery in fastboot . Use this command WHILE HOLDING VOL UP BUTTON
Fastboot reboot
Then phone will reboot into twrp recovery .
I'll need to research on the other one.
Click to expand...
Click to collapse
Bro tell me can i relock bootloader and remove or unflash twrp recovery after gaining root access.
if yes tell me how i can remove twrp recovery becasue it is irritating.
Plzz help me out.

When I click Mount/System it returns back to first option (Reboot) with a blink.
I am following first method.
Please help me.
PLzzzzzzzzzzzzzzz

PLz update the link of magisk zip file
The current link is not working. So plz update the link of magisk zip file.

FIXED: Mount Internal Storage in TWRP (Q Mobile Noir E2)
To mount internal storage in TWRP Recovery, Click on Wipe > Format Data > Type "yes" and Click on Ok. Then Reboot into Recovery. Now your Internal Storage is Mounted in TWRP. But it will format whole internal storage and factory reset rom so make a backup before doing this.

Help with Mate 8 L29-C185-B580

Hello,
I tried to root my mate 8 nxt-L29c185b580
first I unlocked bootloader and install twrp recovery but happen an errors during flashing superSu and the root not work properly. I tried to return to stock but not work I tried B580 and B321 but not work on dload mode also the eRcovery not work, after that I relocked the bootloader but the device now is stacked with the boot and eRecovery apper without work , also I can not open the bootloader because I cannot access the product id from the dialpad
I need the stock firmware or any thing make the phone work please help
thanks

to fastboot
reboot phone, and power + volume down hold
if not connect usb and try it again
then unlock bootloader
twrp
wipe partitions,
you can install throght twrp
for flashing you can try this manual:
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042
if you want B321 i think, you need to downgrade EMUI 5 (with rollback)
or you can try flash B580
- you can try srk tools for unbrick

Ok

nordscan said:
to fastboot
reboot phone, and power + volume down hold
if not connect usb and try it again
then unlock bootloader
twrp
wipe partitions,
you can install throght twrp
for flashing you can try this manual:
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042
if you want B321 i think, you need to downgrade EMUI 5 (with rollback)
or you can try flash B580
- you can try srk tools for unbrick
Click to expand...
Click to collapse
Thanks for your reply
But I can not open the bootloader again from huawei website because I only have imei and sn but not product id (the phone stacked on eRecovery)
Do you have any way to retrieve product id via fastboot?
Which firmware you prefer to flash ?
Thanks

I found this method can any one explain how to do that in details
Also I need stock firmwares c185b580 and c185b560 where can i found them?
The method is
Hard methods, Flashing with fastboot
Download Tools and driver :
ADB-Fasboot-tools.zip –>*Download Here
ADB-Fastboot-Driver –>*Download Here
Huawei Firmware Extractor tool .rar –>*Download Here
1. Downloader rom (UPDATE.APP) put in Huawei Rom Extractor folder.
2. After you puted “UPDATE.APP in folder you first run “split_updata” and it will create “output” folder with extracted files(It script will not work without ActivePerl installed on your computer.)
3. After “split_updata” finished you need to run “HuaweiFinder” script and it will compile “system.img” and “boot.img”, you need cut or copy “boot.img”(18mgb) and “system.img”(1gb img file) in fastboot folder.
4. Reboot your device into bootloader(holding Vol- and power button)
5. Now follow this guides ->*How To Unbrick / Update Firmware Any Android Devices Via Fastboot Mode

ok_free2ooo said:
I found this method can any one explain how to do that in details
Also I need stock firmwares c185b580 and c185b560 where can i found them?
The method is
Hard methods, Flashing with fastboot
Download Tools and driver :
ADB-Fasboot-tools.zip –>*Download Here
ADB-Fastboot-Driver –>*Download Here
Huawei Firmware Extractor tool .rar –>*Download Here
1. Downloader rom (UPDATE.APP) put in Huawei Rom Extractor folder.
2. After you puted “UPDATE.APP in folder you first run “split_updata” and it will create “output” folder with extracted files(It script will not work without ActivePerl installed on your computer.)
3. After “split_updata” finished you need to run “HuaweiFinder” script and it will compile “system.img” and “boot.img”, you need cut or copy “boot.img”(18mgb) and “system.img”(1gb img file) in fastboot folder.
4. Reboot your device into bootloader(holding Vol- and power button)
5. Now follow this guides ->*How To Unbrick / Update Firmware Any Android Devices Via Fastboot Mode
Click to expand...
Click to collapse
How many of you are havkng mate 8 getting volte in india

<backup>ZenFone 3 max ZC553KL ROOT METHOD

This is root method for ZC553KL ,because the old zentalk forum shut down ,so i back up the needed file for rooting
1.Download the TWRP from my g drive :https://drive.google.com/file/d/1pAd_Z32mG7wQaYKs1Vxp03aT8QYdo7Yd/view?usp=sharing
2.Boot the phone to the fastboot mode
3.Open cmd , and type fastboot flash recovery twrp-3.1.1-0-X00D-20171020-5.img,and press enter
4.Boot phone to the recovery mode
5.And flash magisk zip/super su and Reboot your phone
6.Done!
if you want to go back to stock recovery use this :https://drive.google.com/file/d/1YUQ3RI_bV52VQqj7c1sfsjDmVZs0v69j/view?usp=sharing
update : the original dev is @shakalaca
and the original download link still work (only forum died)
original link:https://mega.nz/#F!ZtMT0KxI!ObnACk_mxnPCbPHCVu_G8Q

sylveon cheung said:
This is root method for ZC553KL ,because the old zentalk forum shut down ,so i back up the needed file for rooting
1.Download the TWRP from my g drive :https://drive.google.com/file/d/1pAd_Z32mG7wQaYKs1Vxp03aT8QYdo7Yd/view?usp=sharing
2.Boot the phone to the fastboot mode
3.Open cmd , and type fastboot flash recovery twrp-3.1.1-0-X00D-20171020-5.img,and press enter
4.Boot phone to the recovery mode
5.And flash magisk zip/super su and Reboot your phone
6.Done!
if you want to go back to stock recovery use this :https://drive.google.com/file/d/1YUQ3RI_bV52VQqj7c1sfsjDmVZs0v69j/view?usp=sharing
update : the original dev is @shakalaca
and the original download link still work (only forum died)
original link:https://mega.nz/#F!ZtMT0KxI!ObnACk_mxnPCbPHCVu_G8Q
Click to expand...
Click to collapse
Anyone can tell me is it work for oreo firmware zenfone 3 max 5'5 or not?? I've unloked bootloader

Flash Stock ROM RMX2117 Realme Narzo 30 Pro

Advantages of Flashing stock rom:
If your device is dead, you can unbrick using the Stock ROM
You can fix the boot loop issue on Realme Narzo 30 Pro 5G
Fix Unfortunately, the app has stopped error
Fix Network related issue
Fix No OTA Updates issue
Patch Boot image to Root using Magisk: Guide
You can unroot by flashing stock Boot image
Restore Realme Narzo 30 Pro 5G back to Factory State
Note: Fashing stock will remove all apps and files from your device and return it to Factory State
Disclaimer : I am not responsible for any loss or damage to your device.
Prerequisite :
Unlocked Bootloader
Stock Rom (Firmware) All credit goes to the uploader
MTK Drivers.zip
MTK Bypass Tool.zip Credits : BKerler and Balveer Jat
SP Flash Tool.zip
Method 1 (SP Flash tool) :
How to flash stock rom:
1. Extract all zip files​​SP Flash Tool :​​2. Open SP Flash Tool folder and run flash_tool.exe​​If you get an error click OK an continue​​3. Click on choose for Download-Agent and select MTK_AllInOne_DA.bin file 'located in SP Flash Tool folder'​​4. Click on choose for Scatter-loading File and select MT6853_Android_scatter file 'located in Stock Rom folder'​​5. Click on choose for Authentication File and select auth_sv5.auth file 'located in Stock Rom folder'​All the files will be loaded in the flash_tool​​6. Minimize flash_tool​
MTK Client :​​7. Open MTKClient GUI 2.0 folder and run Bypass.exe, select option 3 by using keyboard down arrow key and press enter.​​8. It will ask do you want to continue?, type y and press enter​Tool will be waiting for device to connect​​9. Switch off your phone​​10. Hold volume up and volume down together and connect phone to PC with USB cable​​11. Tool will detect the phone and start the bypass process​​SP Flash Tool :​​12. One It's completed go to flash_tool and click download​​13. Flashing will start, don't disconnect your phone in between​​14. Once download is completed, you will be prompted will green tick sign​​15. Disconnect your phone and switch it on by holding power key​​You have flashed stock rom successfully ╰(*°▽°*)╯
If device isn't booting let it reboot 2-3 times, it will boot into recovery. Click wipe and format data in recovery.
Method 2 (MTK Client) :
Flash with MTK Client GUI | Thanks bkerler
Download MTK Tool flashable stock rom here

Please provide the full backup for RMX2117 Realme NArzo 30 Pro 5G, need Oppo_Custom.img of this phone as touch wifi is not working under recovery.

ERROR: STATUS_DEVICE_CTRL_EXCEPTION (0XC0050001) - while flashing the provided rom

AK_8K said:
ERROR: STATUS_DEVICE_CTRL_EXCEPTION (0XC0050001) - while flashing the provided rom
Click to expand...
Click to collapse
Sp flash tool doesn't flash all partitions, you must be on same Android version as the provided rom!
To flash all partitions, you need to use MTK Client flashable stock rom. You can find the MTK Client flashable rom on our Telegram community

NinjaChunks said:
Sp flash tool doesn't flash all partitions, you must be on same Android version as the provided rom!
To flash all partitions, you need to use MTK Client flashable stock rom. You can find the MTK Client flashable rom on our Telegram community
Click to expand...
Click to collapse
can you please provide me a stock rom, the above rom is causing bootloop and not displaying anything

need Oppo_Custom.img of rmx2117