I have been struggling with this for a while now:
I installed twro 2.8.7.2 and 2.8.7.1
When I go into recovery directly no screen touch is registered and I have no choice to do everything I need through the twrp app from within android itself.
my phone is G2908.
do you know how I can fix it or if I need any special twrp built?
Related
Hello everybody, I'm new to this world
so, I''ve been trying to flash Omni Rom to my Galaxy Note 10.0 GT-N8000 ,
i used CWM v6.0.0.1 and it is incompatible to flash OmniRom 4.2.3
I tried to switch to Twrp and flashed it (another thread said that if you flash twrp over cwm, it will replace the existing cwm)
now what i get is i get both cwm and twrp and when i checked with ROM Manager it said I have both CWM and Twrp
when I choose TWRP as my current recovery, when I reboot to recovery, I went to CWM, How to get to TWRP or how to remove CWM?
Your help surely appreciated. Been scrolling through threads for hours
I have unlocked the boot loader on oneplus one long back. I tried to upgrade my rom to Resurrection Remix 7.1.1
I successfully upgraded the ROM and also flashed SuperSu in it. I wanted to flash the Opengaps Aroma 7.1 and that is where I ran into issue because of my stupidity.
I found from GitHub that there were some issues with twrp versions to run the aroma installer thus I tried multiple TWRP versions via (Google play - official TWRP recovery app) by downloading them and flashing it to recovery.
I have taken the full nandroid backup but unfortunately didn't keep it on external devices. So it was in the phone itself.
Now the issue -
When I tried flashing TWRP 3.0.2.0 from existing 2.8.4.1 I tried to run the Aroma but it didn't work. Then I tried to flash the recovery with TWRP 2.8.6.1 but Aroma failed again.
However, on the GitHub there was a info stating that known working TWRP recovery on Oneplus one is of TWRP 2.8.4.1
I tried to flash that into recovery and flash the Aroma, but it didn't boot into recovery with that image. Later I restarted the phone, and again flashed the latest recovery version 3.0.2.0
From here I ran into issue. When tried again to flash the Aroma, it didn't work. So I booted recovery again and in that I selected the recovery version 2.8.4.0 for both recovery and boot partition.
After that, phone is neither booting the system nor into recovery. I don't want to loose my data (which is in phone backup) and neither want to try Aroma again. (Even if all the 900mb data needs to be deleted.).
Can the XDA members confirm can I reinstall recovery working image (2.8.4.1) once again through the adb flash recovery <image>. And boot into recovery mode so that I can delete the boot partition once again and reinstall the ROM and data ?
I tried doing that once but one of the laptops which I had access didn't recognize the adb devices. May be the driver was not working for Win10 OS. However, on my personal laptop earlier I was able to run adb commands through CMD prompt. Currently, I don't have personal laptop and may get it by next week.
Can anybody please share me the links of working android driver so that I can install them on current laptop and then try adb commands from SDK to connect my phone.
Any suggestion from members would be of great help.
Note: Please don't suggest the methods to factory reset or lock bootloader to factory settings. As I don't want to loose all my contacts and data.
If there is a way to get just recovery working on the phone, it would be of great help. So that I can wipe other partitions and rebuild it again.
Thank You.
Hello everyone, I'll tell you what happened
First I was in CM13.1, then I flashed to oxygen OS 3.1.4 custom
(When I flash the ROM, without warning me the recovery was updated to the version TWRP 3.0.3-2TugaPower, previously being in a version inferior to 2.8)
After logging in to the new recovery, I noticed that the recovery version was not on the TWRP page, so I decided to flash the most recent version of TWRP (twrp-3.1.1-0-bacon.img), flashe it through Android sdk (Fastboot), everything went well the pc recognized me the OPO in fastboot Mode and flashe the recovery without problems, the problem came when I try to enter the new recovery the OPO does not enter the recovery stays in the OnePlus Logo.
(Before updating the recovery I tried to restate the backup of my previous rom CM13.1 but when I was going to restart it it stays in the OnePlus logo, and when I go to recovery I fixed that in the section of "Mount" system is not checked , Active but still the same, and when I return to recovery is removed.)
I ask you if you can give me ideas to be able to have recovery again and revive my OPO plz.
Molex69 said:
Hello everyone, I'll tell you what happened
First I was in CM13.1, then I flashed to oxygen OS 3.1.4 custom
(When I flash the ROM, without warning me the recovery was updated to the version TWRP 3.0.3-2TugaPower, previously being in a version inferior to 2.8)
After logging in to the new recovery, I noticed that the recovery version was not on the TWRP page, so I decided to flash the most recent version of TWRP (twrp-3.1.1-0-bacon.img), flashe it through Android sdk (Fastboot), everything went well the pc recognized me the OPO in fastboot Mode and flashe the recovery without problems, the problem came when I try to enter the new recovery the OPO does not enter the recovery stays in the OnePlus Logo.
(Before updating the recovery I tried to restate the backup of my previous rom CM13.1 but when I was going to restart it it stays in the OnePlus logo, and when I go to recovery I fixed that in the section of "Mount" system is not checked , Active but still the same, and when I return to recovery is removed.)
I ask you if you can give me ideas to be able to have recovery again and revive my OPO plz.
Click to expand...
Click to collapse
I guess you didn't read the OP of Oxygen Os correctly,he clearly mentioned that this 'Tuga Power Recovery' is patched to work with Oxygen Os's firmware and one should not flash any other recovery.Now,what you can do is this,
https://drive.google.com/file/d/0B-ikULjZZlloNHpOdVBrTzQxZzQ/view?usp=drive_web
> Download This file, install it somewhere and run Revert-2-CM.exe. Make sure you have fastboot drivers installed or it wont work.Avoid using any Antivirus program while doing this as they might give false alarms.After this you'll be restored to TWRP then you can flash any rom you want.The reason due to which you weren't able to find 'TugaPower Recovery' on TWRP page is because this is an Unofficial Recovery.
Question
What does the program do with the OPO?
If you are familiar with fastboot commands, this method should work. Had my OnePlus in the same situation last night messing around with Efidroid. Phone was bootlooping. Efidroid boot menu as well as recovery mode were both inaccessible. I had tried several other things but none worked for me. *CAUTION: this method did ERASE my userdata.* I downloaded a fastboot-able stock full firmware zip, then manually reflashed device. My beloved OnePlus is no longer my daily driver but still my fave device to experiment with so I just used COS 13.1 file. After full reboot, I downloaded and flashed official TWRP. Device is fully functional again, but without OOS installed.
Molex69 said:
What does the program do with the OPO?
Click to expand...
Click to collapse
It'll change your firmware and alter your recovery to a functional TWRP.You'll lose Oxygen Os after doing this.Though you can use this anytime when not being able to flash TWRP.
What should i do
Thanks a lot thanks to the method you told me my OPO has recovery again really thanks, but I have a question, I still in the TugaPower recovery, should I flash the stock recovery or the newest version of TWRP?
Because I do not know if flashing again the TWRP will happen the same
Hi everyone,
I've been trying to get TWRP to stick for a while now, but still haven't been able to get it to install. A while ago I managed to flash Resurrection Remix using Lineage recovery which does work, but since Lineage recovery is quite limited, I really wanted to get TWRP to work. Since TWRP 3.5.0 released yesterday, I gave it another shot hoping that they fixed the issue, to no success.
I can get into TWRP just fine by temp booting it with fastboot, but after flashing the installer zip, any recovery that was previously installed gets wiped and the device will reboot when trying to get into recovery. I can still boot my phone otherwise.
The steps I took to get to this point:
Unlocked bootloader
fastboot boot twrp.img
Decrypt using screen pattern (successfully)
Flashed twrp installer zip (no error messages, process finishes successfully)
Reboot into recovery (both from twrp and bootloader at a later point)
Things I've tried:
Use a different TWRP version. Same problem as described above on both 3.4.x and 3.5.x, can't get it to decrypt on lower versions due to Android 10.
Install to recovery ramdisk, this just breaks things even more, probably because it's an A/B device?
Try a different recovery. Lineage recovery works just fine, but it's very very limited. Would really like to get TWRP working.
Trying to flash the zip results in no error messages, but any previously installed recovery gets wiped and magisk is uninstalled, which leads me to believe that it has done at least something to the boot img.
Thank you in advance.
EDIT 25.02.2021:
- Attached TWRP log
EDIT 12.03.2021:
- Log didn't want to attach, they can be found here: https://pastebin.com/awnhHDBU
Same question here. It seems that you can only boot from TWRP, not install it.
Tried installing again today, to no avail. However, I was smart enough to save the log this time. I have attached it to the main post, would be much appreciated if someone could check it out.
hey coming from android 10 going to 11 something went wrong during the process. Now i dont have magisk and everytime i try to get in recovery twrp just flashes, screen turn off and then turns on over and over again. I am able to get the phone started if i hold down power and up arrow it boots all the way.
I want to install twrp again and magisk. What is the best way to do this as i dont have access to twrp. I tried TWRP-3.5.1-guacamole-Nebrassy-3.img and i am able to boot in to recovery but i cannot flash current twrp "failed to mount /data" error.
Use the official TWRP. It works fine out of the box.
[RECOVERY] [12] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
Installation:
1. fastboot boot twrp.img
2. go to Advanced > Flash Current TWRP
3. after that is done, if you were using a custom kernel, reflash it now
4. if you were using magisk, reflash it now
Updating to a newer build:
1. download new build to internal storage
2. go to Advanced > Install Recovery Ramdisk
4. select the new image
5. after that is done, if you were using a custom kernel, reflash it now
6. if you were using magisk, reflash it now
Dan3ll1 said:
Use the official TWRP. It works fine out of the box.
[RECOVERY] [12] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
Installation:
1. fastboot boot twrp.img
2. go to Advanced > Flash Current TWRP
3. after that is done, if you were using a custom kernel, reflash it now
4. if you were using magisk, reflash it now
Updating to a newer build:
1. download new build to internal storage
2. go to Advanced > Install Recovery Ramdisk
4. select the new image
5. after that is done, if you were using a custom kernel, reflash it now
6. if you were using magisk, reflash it now
Click to expand...
Click to collapse
Thanks got it to work yesterday. I had to change my file system to ex2 then back to ex4 that reformated my phone. I lost all my datA but was able to get TWRP and root.
Question now, which version of TWRP works 100% for a11 on 7pro? And what is the best way to get pixel experience on stock oos on a11?
kayos777 said:
Thanks got it to work yesterday. I had to change my file system to ex2 then back to ex4 that reformated my phone. I lost all my datA but was able to get TWRP and root.
Question now, which version of TWRP works 100% for a11 on 7pro? And what is the best way to get pixel experience on stock oos on a11?
Click to expand...
Click to collapse
The latest official twrp work perfectly with Oxygen A11, dercypt storage and can make nandroid backup. You can find it on the link posted.