Database Info

Oneplus one(bacon) boot and recovery partition crashed. Can fastboot. phone brick

I have unlocked the boot loader on oneplus one long back. I tried to upgrade my rom to Resurrection Remix 7.1.1
I successfully upgraded the ROM and also flashed SuperSu in it. I wanted to flash the Opengaps Aroma 7.1 and that is where I ran into issue because of my stupidity.
I found from GitHub that there were some issues with twrp versions to run the aroma installer thus I tried multiple TWRP versions via (Google play - official TWRP recovery app) by downloading them and flashing it to recovery.
I have taken the full nandroid backup but unfortunately didn't keep it on external devices. So it was in the phone itself.
Now the issue -
When I tried flashing TWRP 3.0.2.0 from existing 2.8.4.1 I tried to run the Aroma but it didn't work. Then I tried to flash the recovery with TWRP 2.8.6.1 but Aroma failed again.
However, on the GitHub there was a info stating that known working TWRP recovery on Oneplus one is of TWRP 2.8.4.1
I tried to flash that into recovery and flash the Aroma, but it didn't boot into recovery with that image. Later I restarted the phone, and again flashed the latest recovery version 3.0.2.0
From here I ran into issue. When tried again to flash the Aroma, it didn't work. So I booted recovery again and in that I selected the recovery version 2.8.4.0 for both recovery and boot partition.
After that, phone is neither booting the system nor into recovery. I don't want to loose my data (which is in phone backup) and neither want to try Aroma again. (Even if all the 900mb data needs to be deleted.).
Can the XDA members confirm can I reinstall recovery working image (2.8.4.1) once again through the adb flash recovery <image>. And boot into recovery mode so that I can delete the boot partition once again and reinstall the ROM and data ?
I tried doing that once but one of the laptops which I had access didn't recognize the adb devices. May be the driver was not working for Win10 OS. However, on my personal laptop earlier I was able to run adb commands through CMD prompt. Currently, I don't have personal laptop and may get it by next week.
Can anybody please share me the links of working android driver so that I can install them on current laptop and then try adb commands from SDK to connect my phone.
Any suggestion from members would be of great help.
Note: Please don't suggest the methods to factory reset or lock bootloader to factory settings. As I don't want to loose all my contacts and data.
If there is a way to get just recovery working on the phone, it would be of great help. So that I can wipe other partitions and rebuild it again.
Thank You.

Can't reboot to Recovery after upgrade to Android 10

Hello everyone,
As I mentioned in the title, since I upgraded to Android 10, can't boot to recovery.
Dowloaded latest version of the Adb kit, and while issuing
adb reboot recovery
the phone reboots but goes to normal boot.
Tried manually (power + vol down etc.) and when choosing Recovery - same thing happens.
Needless to say that my laptop is authorized debug device and phone is in debug mode etc. - I have done this many times before Android 10 update.
All I try to do is to sideload the latest OTA as I did many times before because my phone is rooted and the updates do not install automatically.
Pixel (First generation)
Rooted with Magisk
Bootloader unlocked
Stock recovery (using TWRP without installing it when flashing Magisk)
Hope somebody can advise. Obviously there is something new in Android 10 which has to be set (like the need for debugging authorization for example, which I already did).
Thank you
John

Im getting a similar problem. I get stuck on th Google logo screen. I cant hard-reset, recovery mode or boot, the only things that works is th barcode.

Android 10 changed something in the ramdisk that you can't install TWRP directly on the phone. You have to boot it via PC using "fastboot boot <insert twrp image name>.img"

You can try installing twrp to ramdisk. Put twrp 3.3.1-0.img in your devices storage and then fastboot twrp 3.3.0-0 (disable pin etc first) then once it's booted go to advanced and select install to ramdisk and select the 3.3.1-0.img and it should install it. You may get a not enough storage error on 10/Q (I did) bit worth a punt. Make a back up first as usual, if no good flash a fresh factory.img and see if that cures it and then restore your apps/data etcfrom your Google back up (if you use it)
Good luck

junglism93 said:
You can try installing twrp to ramdisk. Put twrp 3.3.1-0.img in your devices storage and then fastboot twrp 3.3.0-0 (disable pin etc first) then once it's booted go to advanced and select install to ramdisk and select the 3.3.1-0.img and it should install it. You may get a not enough storage error on 10/Q (I did) bit worth a punt. Make a back up first as usual, if no good flash a fresh factory.img and see if that cures it and then restore your apps/data etcfrom your Google back up (if you use it)
Good luck
Click to expand...
Click to collapse
Thank you for the advice, however as I mentioned in my original post I don't want to install TWRP permanently , and the problem is that I cannot go to the stock recovery mode which has no connection to TWRP. There is something with Android 10 which changed since 9 and I'm interested to find what. Everything worked fine before the upgrade.
Also, the option to flash factory image and restore (I also have Titanium in addition to Google backup) is a too much of a hassle. I use this phone for real, not only to play with it.
Anyway, again thank you for your input.
John

Sorry mate, re read your OP. I just tried booting into the aosp recovery and got the same issue! My guess is its magisk as I could boot into the aosp recovery prior to installing it. Re flash or restore the previous boot.img or a stock boot.img and it should boot into aosp recovery again. Magisk must be installing to or patching the aosp recovery ramdisk and stopping it booting. Other than that just fastboot twrp and use that.
Edit: it's magisk, restored original images and it booted into aosp recovery first try.

I've had no problems installing TWRP 3.3.0.0 normally after using an *.img file to get TWRP started. EDIT: and booting into it.

junglism93 said:
Sorry mate, re read your OP. I just tried booting into the aosp recovery and got the same issue! My guess is its magisk as I could boot into the aosp recovery prior to installing it. Re flash or restore the previous boot.img or a stock boot.img and it should boot into aosp recovery again. Magisk must be installing to or patching the aosp recovery ramdisk and stopping it booting. Other than that just fastboot twrp and use that.
Edit: it's magisk, restored original images and it booted into aosp recovery first try.
Click to expand...
Click to collapse
You are right. I did open Magisk and from the uninstall options choosed "Restore images" (no need to do complete uninstall, which is the other option). After that I was able to boot in recovery etc. I guess this is what you meant in your PS. At the end re-flashed Magisk and all is back to normal.
I will alert the Magisk team about the issue (if they are not already aware).
Case closed.
Thanks again.
John

Master Cylinder said:
I've had no problems installing TWRP 3.3.0.0 normally after using an *.img file to get TWRP started. EDIT: and booting into it.
Click to expand...
Click to collapse
Please read my OP. I was clear that I DON'T want to install TWRP permanently and this was never the problem.
The problem is solved (kind of). See the other posts.
Thank you.
John

I thought TWRP wasn't compatible with Android 10 yet? I am seeing mixed things

aholeinthewor1d said:
I thought TWRP wasn't compatible with Android 10 yet? I am seeing mixed things
Click to expand...
Click to collapse
It works just fine.

Mzprx said:
It works just fine.
Click to expand...
Click to collapse
Are there steps for how to install somewhere? I keep reading that it's not working on the Pixel with Android 10. Thanks

aholeinthewor1d said:
Are there steps for how to install somewhere? I keep reading that it's not working on the Pixel with Android 10. Thanks
Click to expand...
Click to collapse
It is a mess. It works with Pixel (I have this one and can confirm) and supposedly Pixel 2. It won't work for brand new phones arriving with factory installed Android 10.
Read the following:
https://twrp.me/site/update/2019/10/23/twrp-and-android-10.html#
After that, if you want to try, go to the page below to find instructions for your device. Note that the list is by manufacturer, so if you are looking for Pixel, it is under Google.
https://twrp.me/Devices/
Just in case - backup and have the factory image for your phone handy in case something goes wrong. For google phones you can download the image and see instructions here:
https://developers.google.com/android/images
Note that I never installed TWRP permanently, so I can't say if the permanent installation will work (I think it should, but not sure). Typically I just load TWRP and use it to flash pakages, but at the end I'm keeping the stock recovery.
Hope this helps. Good luck.
John

Mzprx said:
It is a mess. It works with Pixel (I have this one and can confirm) and supposedly Pixel 2. It won't work for brand new phones arriving with factory installed Android 10.
Read the following:
https://twrp.me/site/update/2019/10/23/twrp-and-android-10.html#
After that, if you want to try, go to the page below to find instructions for your device. Note that the list is by manufacturer, so if you are looking for Pixel, it is under Google.
https://twrp.me/Devices/
Just in case - backup and have the factory image for your phone handy in case something goes wrong. For google phones you can download the image and see instructions here:
https://developers.google.com/android/images
Note that I never installed TWRP permanently, so I can't say if the permanent installation will work (I think it should, but not sure). Typically I just load TWRP and use it to flash pakages, but at the end I'm keeping the stock recovery.
Hope this helps. Good luck.
John
Click to expand...
Click to collapse
Thanks. Yea from what I can tell no one has had luck actually installing it on the Pixel with Android 10 yet. I'm familiar with how to fix everything if something goes wrong. I would try but others have already tried and failed. It won't install for them.

firstly, dont use whatever ****ty platform-tools you are using, get them from here.
secondly, you dont install recovery on android 10 yet, it doenst work. you have to just boot to twrp using `fastboot boot twrp.img` once you are in bootloader mode.

TWRP shows internal storage folders named as random letters.

I have a Redmi note 8 with MIUI 12 installed. Bootloader is unlocked and the phone is rooted.
When I try to flash TWRP recovery in fastboot mode using my PC, it successfully flashes and boots into the TWRP recovery. TWRP does not ask for any password for decrypting the files, and when I go to install>sdcard then the storage is all in random letters, completely unrecognizable.
I have tried a lot of tutorials on youtube but none of them worked. I tried flashing the latest version of TWRP, didn't work. I tried formatting all data and rebooting back into recovery mode, didn't work. (if you reboot to system after installing TWRP, the phone automatically deletes TWRP and the next time you open recovery mode you just get the default MI recovery, and you have to flash TWRP again to open TWRP recovery.) I tried almost everything on the internet but none of it worked. Is there any way I can make it ask for the decryption password? or have my files decrypted? I just need the TWRP for a one-time-use to install a custom ROM. I don't need it to be installed permanently, but no problem even if it does get installed permanently. I just want my custom ROM.
Please help

does that work?:
Boot into twrp, then
Code:
adb shell
twrp decrypt myPassword
(myPassword is your user password)

User699 said:
does that work?:
Boot into twrp, then
Code:
adb shell
twrp decrypt myPassword
(myPassword is your user password)
Click to expand...
Click to collapse
It didnt work, "failed to decrypt data" i typed the right password

#JKTheBaskieBoy said:
It didnt work, "failed to decrypt data" i typed the right password
Click to expand...
Click to collapse
Okay, interessting. What's the exact error?
However, since you only want to use twrp to flash a custom OS, you could try to boot twrp (without flashing)
Code:
fastboot boot twrp.img
and then wipe data via twrp and then install your custom OS. You can use sideload which should be located under "advanced" I guess.
Code:
adb sideload myCustomOS.zip
EDIT: Don't boot out of twrp before sideloading, since your os should encrypt everything again after wiping which makes it unpossible for twrp to decrypt again (at least in your case, since it failed for some reason).
If you booted out of twrp, just wipe again and then sideload.

the correct and recommend way to install TWRP is
Flash TWRP
Erase userdata partition <~ it's important to do this as soon as possible since booting your device would just encrypt everything again
Format userdata partition
by doing this you would be able to access data partition files and folder would not be random letters.

User699 said:
Okay, interessting. What's the exact error?
However, since you only want to use twrp to flash a custom OS, you could try to boot twrp (without flashing)
Code:
fastboot boot twrp.img
and then wipe data via twrp and then install your custom OS. You can use sideload which should be located under "advanced" I guess.
Code:
adb sideload myCustomOS.zip
EDIT: Don't boot out of twrp before sideloading, since your os should encrypt everything again after wiping which makes it unpossible for twrp to decrypt again (at least in your case, since it failed for some reason).
If you booted out of twrp, just wipe again and then sideload.
Click to expand...
Click to collapse
Sorry for the late reply. Earlier i just gave up on installing the custom ROM and continued with my stock from. Today a tried again, installed TWRP and turns out it is not showing random letters now. its all regular storage. i didn't even do anything to decrypt it lol it just fixed itself. Now I will install the room myself. Thank you for your help though

Ah sh** here we go again. So i installed the custom rom successfully and everything worked fine, the TWRP too. but when I tried to flash a magisk patched image (the image that I used to root my phone in MIUI) then it got stuck in the boot screen. I had to flash the stock fastboot rom again.. And as expected from my piece of **** that xiaomi calls a phone, TWRP will show encrypted folders, and does not ask for a password. Same problem. Rooted my phone again, using the magisk root image, and it worked like usual, the phone rooted. Now i am stuck again in this bs. I guess I will wait for about 4-5 days and continue using the phone like normal. Maybe it will work again this time. I will try your method here first
User699 said:
Okay, interessting. What's the exact error?
However, since you only want to use twrp to flash a custom OS, you could try to boot twrp (without flashing)
Code:
fastboot boot twrp.img
and then wipe data via twrp and then install your custom OS. You can use sideload which should be located under "advanced" I guess.
Code:
adb sideload myCustomOS.zip
EDIT: Don't boot out of twrp before sideloading, since your os should encrypt everything again after wiping which makes it unpossible for twrp to decrypt again (at least in your case, since it failed for some reason).
If you booted out of twrp, just wipe again and then sideload.
Click to expand...
Click to collapse

Okay i tried wiping the data, cache and dalvik but it shows a huge essay of "error opening xxx/xxxx" in red text. Data wipe failed.
See you after like 4-5 days... hopefully

Update. I finally found a solution. It took literal hours of experimenting to find this.
-Flashed the fastboot ROM of the phone
-Rooted the phone by flashing magisk patched image
-Flashed Inception kernel via FK kernel manager
-Rebooting after flashing the kernel, It will get stuck in a black screen with no text whatsoever (probably a bootloop)
-Installed TWRP (This time TWRP does not show encrypted letters), Wiped all data, Transferred the custom ROM zip to the phone (while in TWRP) and flashing the rom
-The rom is flashed successfully. On the first reboot you get greeted with another bootloop. Fortunately the phone booted into TWRP. This time the folders are encrypted again.
-Successfully wiped the data (advanced>wipe data). No errors in data wiping this time.
-A fully working Corvus OS setup appears on rebooting.
I think the whole TWRP problem was fixed by the custom kernel. Anyways I am finally done with this now. You probably enjoyed seeing all this xD

#JKTheBaskieBoy said:
Update. I finally found a solution. It took literal hours of experimenting to find this.
-Flashed the fastboot ROM of the phone
-Rooted the phone by flashing magisk patched image
-Flashed Inception kernel via FK kernel manager
-Rebooting after flashing the kernel, It will get stuck in a black screen with no text whatsoever (probably a bootloop)
-Installed TWRP (This time TWRP does not show encrypted letters), Wiped all data, Transferred the custom ROM zip to the phone (while in TWRP) and flashing the rom
-The rom is flashed successfully. On the first reboot you get greeted with another bootloop. Fortunately the phone booted into TWRP. This time the folders are encrypted again.
-Successfully wiped the data (advanced>wipe data). No errors in data wiping this time.
-A fully working Corvus OS setup appears on rebooting.
I think the whole TWRP problem was fixed by the custom kernel. Anyways I am finally done with this now. You probably enjoyed seeing all this xD
Click to expand...
Click to collapse
I like that you keep trying and finding a solution, even though you had to invest hours to make it work!
Let's hope it will work if you update the OS though – I'd actually suggest a backup of all of your data before you do an update in the future, just to be safe!

#JKTheBaskieBoy said:
I have a Redmi note 8 with MIUI 12 installed. Bootloader is unlocked and the phone is rooted.
When I try to flash TWRP recovery in fastboot mode using my PC, it successfully flashes and boots into the TWRP recovery. TWRP does not ask for any password for decrypting the files, and when I go to install>sdcard then the storage is all in random letters, completely unrecognizable.
I have tried a lot of tutorials on youtube but none of them worked. I tried flashing the latest version of TWRP, didn't work. I tried formatting all data and rebooting back into recovery mode, didn't work. (if you reboot to system after installing TWRP, the phone automatically deletes TWRP and the next time you open recovery mode you just get the default MI recovery, and you have to flash TWRP again to open TWRP recovery.) I tried almost everything on the internet but none of it worked. Is there any way I can make it ask for the decryption password? or have my files decrypted? I just need the TWRP for a one-time-use to install a custom ROM. I don't need it to be installed permanently, but no problem even if it does get installed permanently. I just want my custom ROM.
Please help
Click to expand...
Click to collapse
tell me how to turn off a smartphone with a non-working sensor?

you can still use adb push command from pc to transfer files to your phone :
adb push "nameoffile" /sdcard
(place the file in your adb folder) I was able to root a phone that had this issue using this technique.

I think u should flash dm verity becoz when i flashed the rom and flashed dm verity it worked fine

Struggling to flash TWRP / Magisk on last Android 11 update

Hello everyone! Thanks in advance for taking a look at this thread.
I recently upgraded from a Pixel 2 to a Pixel 5 and decide to root my old phone and mess around with that before doing the same with my new phone. It's been several years since I've messed around with rooting a device, so I've spent some time this week refreshing myself on how to do so.
I've already unlocked my bootloader, but the main issue that I'm running into is when I try to install TWRP or Magisk. For some reason, when I try to flash TWRP (version 3.3.0.0), I've managed to install it properly but loading into recovery mode just leaves me stuck at the TWRP splash screen, while booting directly into it doesn't allow me to backup my data (kicking out an error 255 each time). It would be nice to have TWRP to be able to back up rather than starting from scratch each time, even if I've gotten quick at flashing the stock image when I screw up later.
As for Magisk, I've tried flashing the patched boot image through TWRP and received errors (size of image is larger than target device) as well as the .zip file which just caused a bootloop. I know you can install Magisk without TWRP, so I've tried doing that as well. I've been working with both Magisk 23.0 and the Canary build with no luck; after patching the boot image and attempting to flash it using fastboot flash boot magisk_patched.img, I just repeatedly get an error showing "FAILED (remote: 'Error flashing partition')".
So far I've not really been able to find any solutions on how to fix this, so I feel a bit stuck at this point (and definitely questioning my ability to just follow directions). Any advice on how I might get around these errors?

Hello mate,
With regards to installing twrp, I think there is a workaround in the official twrp thread to get twrp installed with working decryption and working pin by rolling back to a pie build prior to encryption being broken for twrp. Personally I just fastboot it when needed to flash anything but sadly twrp back ups don't work (I'm on A11).
It sounds as if you have tried to install magisk a few ways but I found the simplest way was to install the latest magisk.apk then rename it to magisk.zip and flash it via fasbooted twrp.
It sounds as if you tried patching the image etc so may pay to reflash the stock boot.img and then do the APK/zip method to get magisk running.
Lastly, if you don't mind losing your data it may well pay to reflash a full stock.img and then try magisk again. It's solved a few dramas for me when stuff didn't seem to work first time round.

TWRP can't decrypt + Fastboot loop

Unsure if this is the place since its also related to TWRP 3.7, any help is appreicated
Got stuck in a weird situation and wondering if anyone has ideas.
Current State:
Slot_A on OOS 11, can boot TWRP via Fastboot
Slot_B on OOS 12, can only boot into Fastboot
Originally on OOS 11, booted TWRP and made backups of all partitions (data, boot, system image, vendor image, etc.). Forgot to move this to computer so this is all still stored on device.
Proceeded with OOS 12 upgrade (into Slot B). Patched magisk, rebooted, then flashed TWRP 3.7 (FBEv1), direct installed magisk, rebooted. - Everything was functional, but decided to go back to OOS 11.
Thinking I could just use the TWRP backup made on OOS 11, I did the following:
Booted into 3.7 TWRP
Restored the backup for boot, system image, and vendor image
Set active slot to Slot A and reboot
It doesn't allow me to boot into the OS (Presumably because the data was re-encrypted for OOS 12?)
Set active-slot=b and reboot, but it's locked to fastboot.
I've attempted a few things, but I can't boot back into OOS. I would prefer to retrieve my TWRP backups first before doing an MSM reset.
When on Slot_A (older), I can only boot into TWRP 3.6.2 and 3.7. I'm guessing 3.6.2 can't decrypt since it's only configured for A11 and under, but not sure why 3.7 can't decrypt my data.
- It doesn't even ask for pin when TWRP launches; maybe it's reading the System for Slot_A and thinks i'm still on A11?
- running `twrp decrypt {pin}` doesn't seem to work. Unsure if there's something done to my lockscreen pin to be used as the encryption key/password?
When on Slot_A, attempting to boot into either the system or TWRP hangs.
Things I've tried:
Flashing A11 boot.img and magisk-patched boot.img to Slot_A -> Hangs on 1+ Spinning dots
Flashing A12 boot.img and magisk-patched boot.img to Slot_B -> Hangs on 1+ logo (Does show up on ADB though)
Booting Slot_B into TWRP 3.6.2 (Official, and Nebrassy unofficial for A12) and TWRP 3.7 -> Gets stuck on "Fastboot Mode" screen (fastboot cli still responds) or Hangs on snapdragon logo
Edit: Ended up using MSM. Needed device for work

I have a similiar problem to flash twrp to my phone ,
each time i try i get a fastboot loop too and i have to reset/unbrick it with the msm tool back to android 11
i use the OnePlus_7_Pro_Global_OxygenOS_11.0.5.1 package to unbrick the phone , i dont know how long and often i tried now to get twrp to work so that i can flash a custom fw ... i want root and a android 13 based cfw but i dont get it to work :/

I got it working with crdroid. heres some stuff
guacamole - Google Drive
drive.google.com
be carefull
¯\_(ツ)_/¯​
------------------------------------
I got stable and decrypted fs RW working on crdroid 9.1 firmware other than some weird bugs
i put it in the 2023-twrp

MissAnthropin said:
I have a similiar problem to flash twrp to my phone ,
each time i try i get a fastboot loop too and i have to reset/unbrick it with the msm tool back to android 11
i use the OnePlus_7_Pro_Global_OxygenOS_11.0.5.1 package to unbrick the phone , i dont know how long and often i tried now to get twrp to work so that i can flash a custom fw ... i want root and a android 13 based cfw but i dont get it to work :/
Click to expand...
Click to collapse
I have the exact same problem! Have you found a fix yet? This seems to happen when I try to install Android 13 based roms, and when I install a rom like Lineage OS, using their recovery, it works just fine.

No, and I don't know why, maybe i do something wrong or it is the Modell that make this trouble.
I thinking to sell my OP7PRO and buy another one ( and then I have the same problem with the new phone )
No no let the jokes aside, it must work, i mailed with OnePlus Support Germany but they only helped me to install A11 w/root and recovery, i thought ok now I can update to A13 so I loaded A13, unpacked the boot.img, Patched the boot.img
Installed A13 w/out errors, rebooted - Fastboot loop

RIP
Started ranting instead

TWRP for guacamole development seems to be fairly scarce, last working recovery I tried was when they started using fastboot boot to enter it. It was pretty hacky even then, currently it seems that nebrassy is the maintainer for twrp for guacamole.
Github: https://github.com/nebrassy Android 12 thread: https://forum.xda-developers.com/t/recovery-12-official-teamwin-recovery-project.4269551/ Nebrassys Telegram has helpful info as well: https://t.me/NSSFB
last update I found was 2022:10:2 - https://www.pling.com/s/Phones/p/1835156
after a few days of torture I read a thread on here saying if you flashed twrp via magisk like you would if it was a magisk moule it would work normally. It worked on my device so I assume that its universal. I have filled my computer with guacamole related files Im uploading here before im forced to reinstall my os:
guacamole - Google Drive
drive.google.com
Just a fyi from what I have gathered from my experience you can get a stable twrp recovery with persistant / read write access and disabled encryption and basically use it with little error up until you try flashing a newer custom rom. My guess is when flashing a cfw the bootloader gets rewritten causing our boot image to become corrupted. Flashing twrp over / booting to twrp via fastboot or trying to install it via another custom recovery causes boot / recovery failures... meaning you cant really use it for flashing custom roms. I cant find the post with the install instructions I seen that helped me so here is what I think it was,
Found it: https://forum.xda-developers.com/t/how-to-make-twrp-work-in-your-stock-a12.4522667/#post-87985325
~ I have bricked this device constantly while ****ing around so unless youre prepared to go to war with the ****er, Id quit messing with it.
MSM flashing with windows is the only way to recover from the void.
Click to expand...
Click to collapse
using Linux systems for EDL is a bit more difficult to figure out but can be done > EDL https://github.com/bkerler/edl/blob/master/edl | https://github.com/andersson/qdl
Click to expand...
Click to collapse
~If you do brick I created a fastboot flashable A13 Oxygen os recovery rom and uploaded it to my google drive found under recovery_brick_fastboot.zip ~
Click to expand...
Click to collapse
lastly be mindful of a/b partition configuration or youll find yourself lost or bricked
Installation:
1. Obviously unlock the bootloader - OEM Unlock
2. Flash custom recovery (lineage/crdroid/etc)
3. (Personally I root here and again on the active slot so) flash magisk.zip
4. Reboot into installed ROM and install magisk android app and complete setup, reboot system
5. (another thing I like to do before flashing twrp) setup magisk enable all the basic options like prophide, deny list then set root userspace option to global.
6. Flash TWRP .zip (https://dl.twrp.me/guacamolev2/twrp-installer-3.7.0_12-0-guacamolev2.zip) via magisk
Alright! After all that you should be able to reboot into recovery via adb reboot recovery / fastboot or power menu and you find a working twrp recovery installed.
If you need help or want to **** around with the device you can @ me anytime and ill do my best to halp
2600 IRC (cornelius.scuttled.net >Nick captain >channel #guac)
Telegram https://t.me/+pxvpKToFo6pkMGYx
Discord https://discord.gg/MhvWgEfY

Pics

RolandStoner said:
Pics
Click to expand...
Click to collapse
You Confussing me a lot with your Posts before ...
i´m unsure what you mean exactly,
my bootloader is unlocked, with magisk i got a working root but after that i fail
what you mean with flash twrp with magisk ?
after unlocking the bootloader and get root, i tryd to flash twrp like before on other devices but that seems not working because i get then the fastboot loop
on another thread i found here on xda too, the guy wrote dont forget to activate the fastboot loop fix in the advanced options
but i not tried it yet again , so what should i do now ?
for now , i´m back on android11 , with stock oxygen os firmware
i have to do now the things like i did before again , unpack boot.img from the firmware that is installed on the device
patch it with magisk, flash it with "fastboot flash boot boot-patched.img" or is this step senseless ?
i mean you only wrote unlock bootloader and flash a cfw , but i don´t have a chance to flash a custom fw without a custom recovery ??
my recovery on my op7pro have no options for "install zip" or something else
addendum:
like i said you confused me a lot
addendum two:
or i do what i said before .. i sell my op7pro and buy me a one where i havent so much trouble installing twrp and root
i never had a phone before that made so much trouble in installing simple twrp ...
but i don´t found a phone yet that is compatible with kali and the pentest tools or wardriving tools like the oneplus , so i have a problem ,... i think i should drink now my selfmade blackberry liquor ( or blackberry booze ? ) and let the smartphone be a smartphone for now and power off my brain for a while

Yes, you need to patch your boot image via magisk and flash it with fastboot.
After you let magisk do its first time setup and then once it reboots you go to Magisk > Modules and flash the twrp recovery .zip file you got from twrp. link:https://twrp.me/oneplus/oneplus7pro.html just like you would if it was a magisk module.

the password for twrp decryption is your pin. Here are simpler instructions
https://forum.xda-developers.com/t/how-to-make-twrp-work-in-your-stock-a12.4522667/#post-87985325

****... I forgot a step.
after flashing twrp as a module in magisk you dont reboot, you go back to the main screen hit the install button and choose direct install

Now I understand it more, i had before rooted the phone successful with magisk, but then I made a wrong decision and booted into Fastboot and flashed TWRP in Fastboot Mode as I did it before with all my Smarties i had before, coz those way with Fastboot worked before all the time so I never thought that this is the error in the procedure
I give the twrp flashing with magisk a try.
Thx for the help

MissAnthropin said:
Now I understand it more, i had before rooted the phone successful with magisk, but then I made a wrong decision and booted into Fastboot and flashed TWRP in Fastboot Mode as I did it before with all my Smarties i had before, coz those way with Fastboot worked before all the time so I never thought that this is the error in the procedure
I give the twrp flashing with magisk a try.
Thx for the help
Click to expand...
Click to collapse
Thank @yassine2217 because I would never have done so either.... Still many bugs but twrp is twrp