Hi!
I have a Sony Xperia SP, and it was buggi and slow so i wanted to install cm12. After installing it said that i installed successfully bot the phone never booted again, so i reinstalled the custom sony rom. Something went wrong during reinstalling, and it aborted. Now the phone is stuck in a bootloop. At startup the sony logo appears, than the phone reboots. I think it's hardly bricked because:
-The phone is in bootloop.
-I cannot access recovery mode, because during rom reinstalling i lost my root privilege.
-Sony pc companion does not recognize my phone.
-When i try to flash the stock kernel on the phone, with flashtool (phone connected in flash mode), the phone always disconnects at Dumping TA partition 2.
-Cannot connect the phone in fastboot mode (not working with the right gutton combination).
-No software recognize my phone, just flashtool.
-ADB drivers didn"t work.
I tried everithing on win10, win7 and ubuntu 14.04 that i coud find on the internet.
Should i throw it down from a cliff, of you guys have any idea?
Hello,
In order to help you further, please post your question here:
http://forum.xda-developers.com/xperia-sp/help
The experts there will be able to help you. Good luck.
Thanks! I'll do that.
Related
Guys, I am in desperate need of help to resolve my issue.
I have a T-Mobile Sony Xperia Z3 (D6616). Last night I went to flash Existenz Y in XZ Dual Recovery and when I rebooted the phone does not respond to anything. The ONLY thing I can do is hold down volume down and power and it boots up in the Android recovery screen, but any executed command here the phone just turns itself off. If I put the phone to charge the red LED comes on and the phone just vibrates on and off continuously.
The problem I am having is that for whatever reason the FTF stock file is not showing up in Flash tool. I can't drag it into the flash tool window, and using Xperim in flash tool when I find my model and click on the file nothing happens.
I have uninstalled and reinstalled everything. I have the stock FTF on hand, as well as the XZ dual recover file, and the existenxz Y .zip file. I just can't for the life of me get flash tool to populate the FTF file in the window when I go to flash?
I have tried using PC companion to fix/repair the phone as well. I connect the phone and it recognizes it but when I click to fix it and the window pops up asking to connect your phone and hit ok, i hit ok and the window just flashes and stays in place. I do nopt know what to do anymore and been without my phone for a day now already. Just need to figure out why the FTF is not showing in flash tool.
Thanks
Edit: Phone was rooted with kingroot, then Supersu was installed to replace kingroot. Root was verified. I am aware that this doesn't unlock the boo tloader on this phone.
I was able to use Flash tool on my Macbook Pro. For whatever reason in windows it's not recognizing the drivers or the stock ROM. So I rooted the Phone again with kingroot, after installing stock ROM, then installed Supersu, then installed XZ Dualrecovery. Wiped the phone, and for the second time installed existenz Y on the phones internal memory. Selected it in recovery, installed it. When In went to reboot the phone it did the same thing again. Not sure why Exiztenz Y is not working for me........
Edit: I restored my Windows laptop to factory settings and re-installed flashtool and now it's working.
I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.
Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.
Flash stock rom it'll unbrick it
#4
Thank you answer back! I did exactly the following:
The model is my Xperia E3 D2212 dual sim.
- Unlocked the bootloader, :laugh:
- CWM installed a custom recovery, :laugh:
- I reinstalled the original rom, :laugh:
- I made a backup of the entire system using CWM.
And everything went super normal way, without complications.
The mistake was when he wanted to installing a custom ROM called "AOSP_L_MR1_150718_flamingo" because I found out later that he had not read that it was for ANOTHER XPERIA as follow the you tube tutorial . The ROM's for another Xperia, if I remember correctly.
After doing the installation process of the new AOSP ROM, the phone is less than a minute on the logo of SONY XPERIA down with, looped, can not enter the bootloader, and no longer recognizes the PC. I can not recognize it at FlashTool. I think that's all. :crying:
I greatly appreciate your attention.
I ended up editing this text in the google translator, then I'm sorry, if you are not very good.
Thank you
Matteus Maximo Felisberto said:
I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.
Click to expand...
Click to collapse
Someone can help me please?
nibeal said:
Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.
Click to expand...
Click to collapse
Could you help me? I can not make the pc recognize him ... He barely turns on and off since. The PC Companion software tells recognize it, but when you are installing the software says "it is not possible for this phone is changed." I can not scessar the bootloader does not give time and it shuts down.
Thanks, my error was with the fastboot driver and adb in flashtool. The Windows drivers wasn't been recognized, I've to install the drivers, all of they. After this, I Flashed the Stcok ROM, installed SuperSU and Restored the backup, everything works fine and fluid now. Thanks, anyway, for encouraging me.
I flashed my D2203 back to factory rom yesterday using Flashtool (flashtool.net/downloads.php) on Windows 7 PC.
How did I do it:
1) Install flashtool
2) Install Flashtool-drivers.exe from flashtool subfolder /drivers and select flashmode and fastboot drivers.
3) Run Flashtool and open XperiFirm (letters XF on logo)
4) Select Xperia E3 Flamingo -> proper D22** you have -> Market -> and select latest release below PayPal logo
5) Press "Download" and wait for download and unpacking
6) Switch off phone (if power on/off button does not respond then open back cover and push "OFF" by using pen)
7) Press and hold volume down button and connect phone to PC using original USB cable
8) Using Flashmode flash device
Hi!
I have an xperia sp, and jellybean 4.3 it was buggi and slow so i wanted to install cm12. After a succesfull install the phone never booted again, so i reinstalled the custom sony rom. Something went wrong during reinstalling, and it cancelled. Now the phone is stuck in a bootloop. Keep flashing the sony logo, than reboot. I think it's hardly bricked because:
-The phone is in bootloop.
-I cannot access recovery mode, because the rom reinstalling i lost my root privilege.
-Sony pc companion does not recognize my phone.
-When i try to flash the stock kernel on the phone, with flashtool (phone connected in flash mode), the phone always disconnects at Dumping TA partition 2.
-Cannot connect the phone in fastboot mode.
-No software recognize my phone, just flashtool.
-ADB drivers didn"t work.
I tried everithing on win10, win7 and ubuntu 14.04 that i coud find on the internet.
Should i throw it down from a cliff, of you guys have any idea?
Hello,
Welcome to XDA.
In order to assist you, please post your question in the link below
http://forum.xda-developers.com/xperia-sp/help
The experts there will help you. Remember to create an XDA account so you can post and reply in the forums. Good luck.
So i've broke my phone by editing build.prop ... i don't have any recovery, usb debugging AS I REMEMBER WAS ENABLED and my phone is just bootlooping connected on my laptop, it detects it but i can't access files, nor does adb find my phone, or pc companion or any other android file manager . My question is: CAN I FIX IT PLEASE? I've downloaded the original firmware and got out the build.prop the original one, but how can i place it in?!
EDIT: I think i found a fix, sony pc companion actually started to work now after i "entered recovery mode" after a few reboots trying to hold volume down there is no logo, black screen but the phone is like turned on, and it detected my phone and now i'm trying to install my software
If this is going to work, can somebody point out to me some recovery mod and a fast ROM?
kappabear said:
So i've broke my phone by editing build.prop ... i don't have any recovery, usb debugging AS I REMEMBER WAS ENABLED and my phone is just bootlooping connected on my laptop, it detects it but i can't access files, nor does adb find my phone, or pc companion or any other android file manager . My question is: CAN I FIX IT PLEASE? I've downloaded the original firmware and got out the build.prop the original one, but how can i place it in?!
EDIT: I think i found a fix, sony pc companion actually started to work now after i "entered recovery mode" after a few reboots trying to hold volume down there is no logo, black screen but the phone is like turned on, and it detected my phone and now i'm trying to install my software
If this is going to work, can somebody point out to me some recovery mod and a fast ROM?
Click to expand...
Click to collapse
i really didn't understand all of things u said.
but this is what i did when my friend's sony xperia phone wasn't booting
1- unlocking boot Loader
http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/
2- flashing the phone with sony flashtool by androxyde
http://www.flashtool.net/index.php
Hello everyone!
I´m here by to ask for help about my device.
It has been a month since my device is stuck on encryption unsuccessful, although I´ve search on the net and XDA for a solution but to no avail.
My Xperia E3 D2203 from vodafone Portugal can not be repair with Sony Companion:
- Powering on in flash mode led flash green and off and it is recognized as SOMC flash device, pc companion starts the process repair but throws an error asking me to connect in flash mode. I have tried several computers with and without anti virus but nothing works.
I´m able to enter fast mode led flash blue and stays blue.
I downloaded unofficial flash tool from here and used xperifirm with official rom for my device, country and provider:
- Flash mode is recognized and the process begins but get stuck on reading device information.
-Fast boot mode is recognized but no change what so ever.
From what i gathered, using flash tool in info or error mode, I came to brick wall as my device is not in debugging mode but developer mode was active before the device died on me.
Is there anyway to recover my device in this state? What can I do?
It has been a month an a half and I searched, tried again and again all sorts of solution without success.
Any help or pointing me out to the right direction is much appreciated!
Best regards to all.
allnet7.
Try to uninstall Flashtool, remove the .flashtool folder from user folder and then reinstall and try again
rmnhg said:
Try to uninstall Flashtool, remove the .flashtool folder from user folder and then reinstall and try again
Click to expand...
Click to collapse
Thx a bunch.
I'll try soon and will give a feedback soon.
Cheers!:good: