So i've broke my phone by editing build.prop ... i don't have any recovery, usb debugging AS I REMEMBER WAS ENABLED and my phone is just bootlooping connected on my laptop, it detects it but i can't access files, nor does adb find my phone, or pc companion or any other android file manager . My question is: CAN I FIX IT PLEASE? I've downloaded the original firmware and got out the build.prop the original one, but how can i place it in?!
EDIT: I think i found a fix, sony pc companion actually started to work now after i "entered recovery mode" after a few reboots trying to hold volume down there is no logo, black screen but the phone is like turned on, and it detected my phone and now i'm trying to install my software
If this is going to work, can somebody point out to me some recovery mod and a fast ROM?
kappabear said:
So i've broke my phone by editing build.prop ... i don't have any recovery, usb debugging AS I REMEMBER WAS ENABLED and my phone is just bootlooping connected on my laptop, it detects it but i can't access files, nor does adb find my phone, or pc companion or any other android file manager . My question is: CAN I FIX IT PLEASE? I've downloaded the original firmware and got out the build.prop the original one, but how can i place it in?!
EDIT: I think i found a fix, sony pc companion actually started to work now after i "entered recovery mode" after a few reboots trying to hold volume down there is no logo, black screen but the phone is like turned on, and it detected my phone and now i'm trying to install my software
If this is going to work, can somebody point out to me some recovery mod and a fast ROM?
Click to expand...
Click to collapse
i really didn't understand all of things u said.
but this is what i did when my friend's sony xperia phone wasn't booting
1- unlocking boot Loader
http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/
2- flashing the phone with sony flashtool by androxyde
http://www.flashtool.net/index.php
Related
I have two factory unlocked Xperia ray (so-03c)
Recently i upgraded one of them to the latest firmware using "sony bridge for mac". Just after upgrade; phone stopped showing any cellular networks; everything including wifi was working smoothly. I tried switching different modes GSM, WCDMS and WCDMA/GSM; it didn't work out for cellular. (I used to have Galaxy Ace, so tried if Android boot recovery would work out; but didn't found anyway in xperia).
I wanted to repair the phone using option in "Sony Bridge for Mac" again. Before proceeding; I did a factory reset then using the settings in the phone. Bridge didn't recognise my phone; Then I found some tutorial for doing reset in the web; And; Pressed Power and Volume Down for about 20 seconds; it vibrated 3-4 times.
Tried to open the phone; it just kept looping in the boot screen
I cant connect it to flashtool, bridge for recovery; Even tried in PC Companion. it detects my phone; but when I want to go to repair; it wont proceed as i cant take the phone to recovery mode. holding volume down and connecting Usb does not do anything
I would be happy if there is any way of recovering this device and i can restore to an earlier firmware; which is intact in the other phone.
Images in attachments:
Loop: (i can see sony xperia)
When i press volume down and connect to usb; just shows charging
Shown by bridge and flashtool:
I think there is a fastboot mode way for recovering a device. I search on google and I found a topic about recovering an Optimus One P500 by fastboot, maybe it will work for your device too...
Jackamma said:
I think there is a fastboot mode way for recovering a device. I search on google and I found a topic about recovering an Optimus One P500 by fastboot, maybe it will work for your device too...
Click to expand...
Click to collapse
I installed adb; but still terminal wont show up the device.
had you try to repair it via SEUS?
i don't know what it's name in mac..
sunkenship said:
had you try to repair it via SEUS?
i don't know what it's name in mac..
Click to expand...
Click to collapse
Yes I tried in windows and mac both:
used Pc companion, Update Service, Bridge for mac; Tried flashtool (with black logo); Sony's Emma flashtool wont show device.
Bridge for mac reads device but asks to connect again enabling memory card.
Installed Android developer sdk; but the device didnt go to the flashboot mode. when it connects to usb; it shows charging; wont loop; When i open it, it stays on a loop.
hellonepal said:
I have two factory unlocked Xperia ray (so-03c)
Recently i upgraded one of them to the latest firmware using "sony bridge for mac". Just after upgrade; phone stopped showing any cellular networks; everything including wifi was working smoothly. I tried switching different modes GSM, WCDMS and WCDMA/GSM; it didn't work out for cellular. (I used to have Galaxy Ace, so tried if Android boot recovery would work out; but didn't found anyway in xperia).
I wanted to repair the phone using option in "Sony Bridge for Mac" again. Before proceeding; I did a factory reset then using the settings in the phone. Bridge didn't recognise my phone; Then I found some tutorial for doing reset in the web; And; Pressed Power and Volume Down for about 20 seconds; it vibrated 3-4 times.
Tried to open the phone; it just kept looping in the boot screen
I cant connect it to flashtool, bridge for recovery; Even tried in PC Companion. it detects my phone; but when I want to go to repair; it wont proceed as i cant take the phone to recovery mode. holding volume down and connecting Usb does not do anything
I would be happy if there is any way of recovering this device and i can restore to an earlier firmware; which is intact in the other phone.
Images in attachments:
Loop: (i can see sony xperia)
When i press volume down and connect to usb; just shows charging
Shown by bridge and flashtool:
Click to expand...
Click to collapse
You might want to download any Official FTF file for Xperia Ray, then try to flash this on the phone before trying other custom ROMs
ivan.untalan said:
You might want to download any Official FTF file for Xperia Ray, then try to flash this on the phone before trying other custom ROMs
Click to expand...
Click to collapse
I do have original ftf file.
The problem is I cant take my phone either in flashboot mode or the recovery mode; When i press volume down or up and connect usb; it goes to charging mode. When i open it normally; t goes to boot loop.
Hi, everyone, I'm new here but I've created a topic for anyone of you can help me.
My Xperial L stopped working after installing the new Cyanogenmod after restarted by CWM, the phone will not turn over, however, CWM lights still work, but when I press the volume buttons together, the lights go out and I can not open the CWM menu to make the recovery of the original ROM.
I tried another method, use fastboot to reinstall CWM, but my computer does not recognize the phone more.
Could anyone help me?
-Using Google Translate:
Vinicius Neves said:
Hi, everyone, I'm new here but I've created a topic for anyone of you can help me.
My Xperial L stopped working after installing the new Cyanogenmod after restarted by CWM, the phone will not turn over, however, CWM lights still work, but when I press the volume buttons together, the lights go out and I can not open the CWM menu to make the recovery of the original ROM.
I tried another method, use fastboot to reinstall CWM, but my computer does not recognize the phone more.
Could anyone help me?
-Using Google Translate:
Click to expand...
Click to collapse
Hi,
First remove your battery and insert it back after 1 minute.
Then don't turn on your phone but try to connect to flashtool.
and flash stock ftf.
You should goog to go.
I have try many times, but not appear "The device has connected in Flash mode" menssage.
If the PC don't recognize my device, Flashtool not work.
Vinicius Neves said:
Hi, everyone, I'm new here but I've created a topic for anyone of you can help me.
My Xperial L stopped working after installing the new Cyanogenmod after restarted by CWM, the phone will not turn over, however, CWM lights still work, but when I press the volume buttons together, the lights go out and I can not open the CWM menu to make the recovery of the original ROM.
I tried another method, use fastboot to reinstall CWM, but my computer does not recognize the phone more.
Could anyone help me?
-Using Google Translate:
Click to expand...
Click to collapse
Did you unlock your bootloader before flashing?
Bang d thanks button above ☝✌
Yes. My device have:
Bootloader unlocked
Root
CMW
Overclock Thunderzap
32gb SDCard
The only problem is the entrance of usb cable of my device, he just recharge the device, he not work to do a boot.
The way I see is change the entrance try again, but now, I need find other way.
try to flash kernel that suits your ROM, connect your phone in fastboot mode and flash it with flastool
Vinicius Neves said:
Yes. My device have:
Bootloader unlocked
Root
CMW
Overclock Thunderzap
32gb SDCard
The only problem is the entrance of usb cable of my device, he just recharge the device, he not work to do a boot.
The way I see is change the entrance try again, but now, I need find other way.
Click to expand...
Click to collapse
Did you install the xperia L drivers in laptop?
Bang d thanks button above ☝✌
Unffortunaly, no. I have tried find the drivers in SONY website, but needs the PC Companion with UBS Cable on Device, but in that time, my phone has been crashed.
Vinicius Neves said:
Unffortunaly, no. I have tried find the drivers in SONY website, but needs the PC Companion with UBS Cable on Device, but in that time, my phone has been crashed.
Click to expand...
Click to collapse
You installed flash tool na?
Check d installation directory of flashtool and ull find drivers .......install it ....select xperia L option ...and install.
Then ull find drivers installed in pc !
Bang d thanks button above ☝✌
Guys, I am in desperate need of help to resolve my issue.
I have a T-Mobile Sony Xperia Z3 (D6616). Last night I went to flash Existenz Y in XZ Dual Recovery and when I rebooted the phone does not respond to anything. The ONLY thing I can do is hold down volume down and power and it boots up in the Android recovery screen, but any executed command here the phone just turns itself off. If I put the phone to charge the red LED comes on and the phone just vibrates on and off continuously.
The problem I am having is that for whatever reason the FTF stock file is not showing up in Flash tool. I can't drag it into the flash tool window, and using Xperim in flash tool when I find my model and click on the file nothing happens.
I have uninstalled and reinstalled everything. I have the stock FTF on hand, as well as the XZ dual recover file, and the existenxz Y .zip file. I just can't for the life of me get flash tool to populate the FTF file in the window when I go to flash?
I have tried using PC companion to fix/repair the phone as well. I connect the phone and it recognizes it but when I click to fix it and the window pops up asking to connect your phone and hit ok, i hit ok and the window just flashes and stays in place. I do nopt know what to do anymore and been without my phone for a day now already. Just need to figure out why the FTF is not showing in flash tool.
Thanks
Edit: Phone was rooted with kingroot, then Supersu was installed to replace kingroot. Root was verified. I am aware that this doesn't unlock the boo tloader on this phone.
I was able to use Flash tool on my Macbook Pro. For whatever reason in windows it's not recognizing the drivers or the stock ROM. So I rooted the Phone again with kingroot, after installing stock ROM, then installed Supersu, then installed XZ Dualrecovery. Wiped the phone, and for the second time installed existenz Y on the phones internal memory. Selected it in recovery, installed it. When In went to reboot the phone it did the same thing again. Not sure why Exiztenz Y is not working for me........
Edit: I restored my Windows laptop to factory settings and re-installed flashtool and now it's working.
I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.
Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.
Flash stock rom it'll unbrick it
#4
Thank you answer back! I did exactly the following:
The model is my Xperia E3 D2212 dual sim.
- Unlocked the bootloader, :laugh:
- CWM installed a custom recovery, :laugh:
- I reinstalled the original rom, :laugh:
- I made a backup of the entire system using CWM.
And everything went super normal way, without complications.
The mistake was when he wanted to installing a custom ROM called "AOSP_L_MR1_150718_flamingo" because I found out later that he had not read that it was for ANOTHER XPERIA as follow the you tube tutorial . The ROM's for another Xperia, if I remember correctly.
After doing the installation process of the new AOSP ROM, the phone is less than a minute on the logo of SONY XPERIA down with, looped, can not enter the bootloader, and no longer recognizes the PC. I can not recognize it at FlashTool. I think that's all. :crying:
I greatly appreciate your attention.
I ended up editing this text in the google translator, then I'm sorry, if you are not very good.
Thank you
Matteus Maximo Felisberto said:
I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.
Click to expand...
Click to collapse
Someone can help me please?
nibeal said:
Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.
Click to expand...
Click to collapse
Could you help me? I can not make the pc recognize him ... He barely turns on and off since. The PC Companion software tells recognize it, but when you are installing the software says "it is not possible for this phone is changed." I can not scessar the bootloader does not give time and it shuts down.
Thanks, my error was with the fastboot driver and adb in flashtool. The Windows drivers wasn't been recognized, I've to install the drivers, all of they. After this, I Flashed the Stcok ROM, installed SuperSU and Restored the backup, everything works fine and fluid now. Thanks, anyway, for encouraging me.
I flashed my D2203 back to factory rom yesterday using Flashtool (flashtool.net/downloads.php) on Windows 7 PC.
How did I do it:
1) Install flashtool
2) Install Flashtool-drivers.exe from flashtool subfolder /drivers and select flashmode and fastboot drivers.
3) Run Flashtool and open XperiFirm (letters XF on logo)
4) Select Xperia E3 Flamingo -> proper D22** you have -> Market -> and select latest release below PayPal logo
5) Press "Download" and wait for download and unpacking
6) Switch off phone (if power on/off button does not respond then open back cover and push "OFF" by using pen)
7) Press and hold volume down button and connect phone to PC using original USB cable
8) Using Flashmode flash device
Hey Guys,
I'm not sure if this issue has been solved, but I was kinda clumsy when i tried to install superSU.zip via twrp (I have TWRP 3.0.2-0)and my Z3 still turns on but wont go to the home screen. I tried downloading the stock firmware and used flashtool but I can't get my phone to flashmode via volume down and plugging it. When I plug it on my laptop (windows 10) while holding any button it shows me the sony logo and nothing happens, no lights. so I turn off the device via the emergency button and holding it down for a few seconds. Good thing is im still able to go to TWRP via turning the phone on and waiting for the purple LED and pressing the volume up and down.
I tried looking for a back up file for my Z3 d6603 and planning to put it on my SD card and restore via TWRP. is my phone really dead? I'm not losing hope yet since i can still charge my phone (i dont see the battery icon though) but it charged from 70 to 83 while plugged in without the red LED and the battery logo.
Can someone please help me with this dilemma? I cant find the right keywords for this problem using google. any help will be much appreciated guys!
bootloop solution
Hello, regarding your question ami happened to me several times when trying to root my old good z1 what you can do if you did not make a backup of your rom, you must have Sony PC Companion on your pc ok and then connect your z3 Off, the pc companion detect the phone and what you have to do is go to the section where it says Support Zone and followed where it says software update of the phone will appear a window that says that the phone could not be found but more abajito says repair phone You click there and start the process ok, look for more reference and accuracy look for a video of it on youtube, I would leave the link but I block it I'll leave you the name of the video and try to find it out, luck. :good::good::good:
Flashear o Revivir Xperia ion con Sony PC companion ----- Search on youtube