I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.
Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.
Flash stock rom it'll unbrick it
#4
Thank you answer back! I did exactly the following:
The model is my Xperia E3 D2212 dual sim.
- Unlocked the bootloader, :laugh:
- CWM installed a custom recovery, :laugh:
- I reinstalled the original rom, :laugh:
- I made a backup of the entire system using CWM.
And everything went super normal way, without complications.
The mistake was when he wanted to installing a custom ROM called "AOSP_L_MR1_150718_flamingo" because I found out later that he had not read that it was for ANOTHER XPERIA as follow the you tube tutorial . The ROM's for another Xperia, if I remember correctly.
After doing the installation process of the new AOSP ROM, the phone is less than a minute on the logo of SONY XPERIA down with, looped, can not enter the bootloader, and no longer recognizes the PC. I can not recognize it at FlashTool. I think that's all. :crying:
I greatly appreciate your attention.
I ended up editing this text in the google translator, then I'm sorry, if you are not very good.
Thank you
Matteus Maximo Felisberto said:
I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.
Click to expand...
Click to collapse
Someone can help me please?
nibeal said:
Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.
Click to expand...
Click to collapse
Could you help me? I can not make the pc recognize him ... He barely turns on and off since. The PC Companion software tells recognize it, but when you are installing the software says "it is not possible for this phone is changed." I can not scessar the bootloader does not give time and it shuts down.
Thanks, my error was with the fastboot driver and adb in flashtool. The Windows drivers wasn't been recognized, I've to install the drivers, all of they. After this, I Flashed the Stcok ROM, installed SuperSU and Restored the backup, everything works fine and fluid now. Thanks, anyway, for encouraging me.
I flashed my D2203 back to factory rom yesterday using Flashtool (flashtool.net/downloads.php) on Windows 7 PC.
How did I do it:
1) Install flashtool
2) Install Flashtool-drivers.exe from flashtool subfolder /drivers and select flashmode and fastboot drivers.
3) Run Flashtool and open XperiFirm (letters XF on logo)
4) Select Xperia E3 Flamingo -> proper D22** you have -> Market -> and select latest release below PayPal logo
5) Press "Download" and wait for download and unpacking
6) Switch off phone (if power on/off button does not respond then open back cover and push "OFF" by using pen)
7) Press and hold volume down button and connect phone to PC using original USB cable
8) Using Flashmode flash device
Related
I installed AVD Rom on my Rooted Xperia J with Locked Bootloader running on Stock ICS 11.0.A.7.5, after following all the instructions like Wiping The System Cache, the Dalvik Cache and the formatting /system. I was already at the instruction where I had to install the ROM itself It said it had a problem on the SDCard and I realized that the zip file of the rom was supposed to be placed in the ext_card, which i removed earlier before installing the ROM.
As a result I removed the battery Even with CWM On and after inserting the ext_card with the ROM I booted up and it stayed stuck in the SONY Logo and I was unable to enter CWM
I tried Reflashing the Stock ICS with Xperia Flasher but the phone won't even enter flashmode even if I am holding the Vol- button while connecting to PC all it says is Device Connected with USB debugging mode off. I tried to repair it with Sony PC Companion but it is also not detected by PC companion.
Please help guys I would really appreciate it. Thanks
fonetalker101 said:
I installed AVD Rom on my Rooted Xperia J with Locked Bootloader running on Stock ICS 11.0.A.7.5, after following all the instructions like Wiping The System Cache, the Dalvik Cache and the formatting /system. I was already at the instruction where I had to install the ROM itself It said it had a problem on the SDCard and I realized that the zip file of the rom was supposed to be placed in the ext_card, which i removed earlier before installing the ROM.
As a result I removed the battery Even with CWM On and after inserting the ext_card with the ROM I booted up and it stayed stuck in the SONY Logo and I was unable to enter CWM
I tried Reflashing the Stock ICS with Xperia Flasher but the phone won't even enter flashmode even if I am holding the Vol- button while connecting to PC all it says is Device Connected with USB debugging mode off. I tried to repair it with Sony PC Companion but it is also not detected by PC companion.
Please help guys I would really appreciate it. Thanks
Click to expand...
Click to collapse
There should be no reason for the phone not to go into flashmode is your battery charged?
Yes Sir, It boots up when I press a button and stays stuck at the SONY LogoI doesn't even enter recovery mode
Sir please help, All i can do now is rely on your instructions
Use pc companion and repair your phone
Sent from my ST23i
does fastboot mode work?
Download Sony Update Service and follow it's instruction to fix your phone.
For me it worked.
Charge your XJ's battery using an external battery charger! That happened to me also! I charged my battery and tried and flashmode as well as fastboot started to work
Sent from my ST26i using xda app-developers app
Mystogan said:
I installed AVD Rom on my Rooted Xperia J with Locked Bootloader running on Stock ICS 11.0.A.7.5, after following all the instructions like Wiping The System Cache, the Dalvik Cache and the formatting /system. I was already at the instruction where I had to install the ROM itself It said it had a problem on the SDCard and I realized that the zip file of the rom was supposed to be placed in the ext_card, which i removed earlier before installing the ROM.
As a result I removed the battery Even with CWM On and after inserting the ext_card with the ROM I booted up and it stayed stuck in the SONY Logo and I was unable to enter CWM
I tried Reflashing the Stock ICS with Xperia Flasher but the phone won't even enter flashmode even if I am holding the Vol- button while connecting to PC all it says is Device Connected with USB debugging mode off. I tried to repair it with Sony PC Companion but it is also not detected by PC companion.
Please help guys I would really appreciate it. Thanks
Click to expand...
Click to collapse
Hai My Dear Friend....
Let try this following...
first what u need is usb cable
second sony pc companian
ok...first u need to run pc companion
2. click start and then start againt from software update
3. click repair my phone/tablet and then click continue
TAKE NOTED YOUR PERSONAL DATA WILL LOST AFTER OPERATION.
4. CLICK CLICK THE BOX THAT U AGREE AND UNDERSTAND AND CLICK CONTINUE
THEN PREPARE NOW LOADING ON SCREEN AFTER DONE PLEASE SELECT YOUR PHONE MODEL AND CLICK NEXT
5. PRESS BUTTON VOLUME DOWN AND CONNECT PHONE TO USB AND WAIT UNTIL UPDATE COMPLETE.
MAYBE 30MINIT OR 1HOUR PROSES REPAIR AND UPDATE YOUR PHONE....
6. AFTER UPDATE COMPLETE PLEASE TAKE OUT YOUR BATTERY FIRST AND THEN PULL BACK AND ON YOUR PHONE
AFTER ON PHONE WILL LOADING UPGRADE YOUR PHONE PLEASE BE PATIENT....AFTER ALL DONE YOU WILL SMILE AND PHONE JUST COME BACK TO U.... YA
SORRY MY ENGLISH NOT GOOD
trytohelp said:
Hai My Dear Friend....
Let try this following...
first what u need is usb cable
second sony pc companian
ok...first u need to run pc companion
2. click start and then start againt from software update
3. click repair my phone/tablet and then click continue
TAKE NOTED YOUR PERSONAL DATA WILL LOST AFTER OPERATION.
4. CLICK CLICK THE BOX THAT U AGREE AND UNDERSTAND AND CLICK CONTINUE
THEN PREPARE NOW LOADING ON SCREEN AFTER DONE PLEASE SELECT YOUR PHONE MODEL AND CLICK NEXT
5. PRESS BUTTON VOLUME DOWN AND CONNECT PHONE TO USB AND WAIT UNTIL UPDATE COMPLETE.
MAYBE 30MINIT OR 1HOUR PROSES REPAIR AND UPDATE YOUR PHONE....
6. AFTER UPDATE COMPLETE PLEASE TAKE OUT YOUR BATTERY FIRST AND THEN PULL BACK AND ON YOUR PHONE
AFTER ON PHONE WILL LOADING UPGRADE YOUR PHONE PLEASE BE PATIENT....AFTER ALL DONE YOU WILL SMILE AND PHONE JUST COME BACK TO U.... YA
SORRY MY ENGLISH NOT GOOD
Click to expand...
Click to collapse
Awesome that you help him, but the post is from September . But it's still awesome that there are people out there who post complete guides like yours, and not just say: "use SUS, use Flashtool use PC Companion".
Merry Christmas
Sent by magic!
Man this was a thread I created when I was a nublet here in forums and cannot understand anything lol
So I rooted my Xperie E C1505 and installed Chainfire3d , thinking nothing bad was going to come out of it, and when I installed some package on Chainfire3d, ignoring the warning, my phone is now stuck in Bootloop!
Just now, I unrooted my phone using KINGO Android ROOT, but this hasn't brought me anywhere I have Flashtool and I downloaded a 4.11 Xperia E firmware and it is in the "firmware" folder. I attempted to flash my ROM and it was going fine until it asked me to connect device in Flashmode. I installed Flashmode and Fastboot drivers and I connected my phone, but only the green LED came up on the phone and nothing happened
I have no clue now so any help would be greatly appreciated!
shaunovenss said:
So I rooted my Xperie E C1505 and installed Chainfire3d , thinking nothing bad was going to come out of it, and when I installed some package on Chainfire3d, ignoring the warning, my phone is now stuck in Bootloop!
Just now, I unrooted my phone using KINGO Android ROOT, but this hasn't brought me anywhere I have Flashtool and I downloaded a 4.11 Xperia E firmware and it is in the "firmware" folder. I attempted to flash my ROM and it was going fine until it asked me to connect device in Flashmode. I installed Flashmode and Fastboot drivers and I connected my phone, but only the green LED came up on the phone and nothing happened
I have no clue now so any help would be greatly appreciated!
Click to expand...
Click to collapse
Open flashtool,select firmware.
Untick everything except wipe data.
Flash.[Will take some time]
A dialog box will pop up saying connect to flashmode.
Power off mobile.
Press the volume down button while connecting phone via usb.
Phone will get detected,and then a firmware shall be flashed.
[Have you installed adb drivers?]
I downloaded ADB-USB drivers but when I open it in WinRAR, it's a .inf file so I dont know what to do
TheXperiaE said:
Open flashtool,select firmware.
Untick everything except wipe data.
Flash.[Will take some time]
A dialog box will pop up saying connect to flashmode.
Power off mobile.
Press the volume down button while connecting phone via usb.
Phone will get detected,and then a firmware shall be flashed.
[Have you installed adb drivers?]
Click to expand...
Click to collapse
I downloaded ADB driver but when I open it with WinRAR, it's a .inf file, so I don't know what to do
Dude if you haven't unlocked your Sony Xperia Phone's bootloader you can repair your phone with Sony Update Service (SUS) software.
You just need to be in the working flashmode and else all work will be handled by that software.. from downloading the firmware of your phone to flashing it and then you will get your phone up to date working with the latest firmware.
Sent from my Xperia E using XDA Premium 4 mobile app
I know there are probably lots of threads about this, but I couldn't find one about E3 since it's a relatively new phone, but to point now
So I tried to update my Xperia E3 to it's latest firmware via the Sony pc companion(it was the only option) and during the update ,once it was downloaded it prompted to connect the phone through the USB cable, once done it began installing the update but when it was like at 80-85% it showed an error saying that internet connection isn't available and gave two options to either retry or cancel, now the internet was just working fine, I checked google, Youtube everything and it was working, but every time I hit retry it gave the same option ,so eventually I canceled the update,
Now the phone was switched off so I tried switching it on and it just froze at the sony boot logo screen, restarting with power button+volume up only restarts it to the same situation(stuck at logo screen), I did look up for a solution but couldn't find one that fit,
Of course I did switch it off using the off button at the back of phone(under the back cover), and I know about Sony Update service but that's no longer supported(it required the phone in off state), pc companion can't detect an off phone and when it does it starts phone to boot frozen screen and fails at detect step, another thing I found was a custom tool(possibly just SUS) that could flash a firmware in an off phone but however there is no firmware available for my version, since I live in India, so there's that , any help is appreciated,
A few things:
-The battery was at 91% when update started
-There was no root attempt etc made on phone, it was complete stock
-I did update the firmware once earlier but just from the phone it was a 2 mp update, no pc
-When I started this update there was already a 29 mb something update available without pc, and that's pretty much all, like I said any help is appreciated
Don't worry buddy, your phone doesn't die yet. Actually, PC Companion (PCC) has repair phone/tablet function.
Open PCC, click Start button in Support Zone, then continue to click Start button under Phone/Tablet Software Update and you will see "Repair your phone/tablet". Just follow its instruction. remember using the hard reset button under the back cover to turn off the device first and don't turn it on.
Anyway, what is your model? d22xx? i can't provide the firmware unless I know exactly the model.
It worked
Benjoy Ericsson said:
Don't worry buddy, your phone doesn't die yet. Actually, PC Companion (PCC) has repair phone/tablet function.
Open PCC, click Start button in Support Zone, then continue to click Start button under Phone/Tablet Software Update and you will see "Repair your phone/tablet". Just follow its instruction. remember using the hard reset button under the back cover to turn off the device first and don't turn it on.
Anyway, what is your model? d22xx? i can't provide the firmware unless I know exactly the model.
Click to expand...
Click to collapse
Thanks man, it worked, the phone is good and running again.
Benjoy Ericsson said:
Don't worry buddy, your phone doesn't die yet. Actually, PC Companion (PCC) has repair phone/tablet function.
Open PCC, click Start button in Support Zone, then continue to click Start button under Phone/Tablet Software Update and you will see "Repair your phone/tablet". Just follow its instruction. remember using the hard reset button under the back cover to turn off the device first and don't turn it on.
Anyway, what is your model? d22xx? i can't provide the firmware unless I know exactly the model.
Click to expand...
Click to collapse
Hello, my device is D2212 and I have similar problem.
I've rooted and unlocked bootloader using this method from XDA forum to root Xperia E3. However after unlocking bootloader and root my device my PC and my notebook doesn't recognize my device to transfer data or access data of cellphone. It keeps in charging mode.
Today it was really weird and lagging way too much so I tried to reset to factory setting. After that my device does not start android it keep stuck on blue screen right after display of Xperia and android.
I tried this method you suggested of PC Companion but it does not work since PC does not recognize my device anymore since rooting.
I need help here, please.
O just bought this device last week.
Thanks in advance.
Cristy0505 said:
Hello, my device is D2212 and I have similar problem.
I've rooted and unlocked bootloader using this method from XDA forum to root Xperia E3. However after unlocking bottloader and root my device my PC and my notebook doesn't recognize my device to transfer data or access data of cellphone. It keeps in charging mode.
Today it was really weird and lagging way too much so I tried to reset to factory setting. After that my device does not start android it keep stuck on blue screen right after display of Xperia and android.
I tried this method you suggested of PC Companion but it does not work since PC does not recognize my device anymore since rooting.
I need help here, please.
O just bought this device last week.
Thanks in advance.
Click to expand...
Click to collapse
Flash the firmware again using flashtool.
adrianocolvero said:
Flash the firmware again using flashtool.
Click to expand...
Click to collapse
Hi, thank you for your kind support.
Do you mean which part of this tutorial? http : // forum.xda-developers.com/xperia-e3/general/root-e3-t2964845
First "HOW TO UNLOCK YOUR BOOTLOADER!" or second "NOW HOW TO FLASH THE KERNEL AND APPLY THE ROOT!"?
Best regards!
Cristy0505 said:
Hi, thank you for your kind support.
Do you mean which part of this tutorial? http : // forum.xda-developers.com/xperia-e3/general/root-e3-t2964845
First "HOW TO UNLOCK YOUR BOOTLOADER!" or second "NOW HOW TO FLASH THE KERNEL AND APPLY THE ROOT!"?
Best regards!
Click to expand...
Click to collapse
Use this tutorial:
http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
With this firmware:
http://forum.xda-developers.com/xperia-e3/general/firmware-18-4-b-2-14-rool-xperia-e3-t2939699
adrianocolvero said:
Use this tutorial:
http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
With this firmware:
http://forum.xda-developers.com/xperia-e3/general/firmware-18-4-b-2-14-rool-xperia-e3-t2939699
Click to expand...
Click to collapse
Thank you very much, sir!
hai guys i have a xperia e3 dual d2212 i'm not sure whether it's rooted or unlocked bootloader it stucks on logo screen i try to flash it using flash tool but it says
ERROR drivers needed to be installed for connected device
ERROR you can find them in the drivers folder of flashtool
but i searched there there no devices mentioning e3 only e is available
in this condition should i flash or there is any other way please give me a solution
Hello I have a Sony experia e3 and it is giving me a problem. When I'm trying to start my phone it is booting and gets off by itself and again restarts...and this is going on and on. So please can you help me or give me a suggestion about how to fix it.
Please please please help for which I may remain ever greatful to you
Hi, everyone, I'm new here but I've created a topic for anyone of you can help me.
My Xperial L stopped working after installing the new Cyanogenmod after restarted by CWM, the phone will not turn over, however, CWM lights still work, but when I press the volume buttons together, the lights go out and I can not open the CWM menu to make the recovery of the original ROM.
I tried another method, use fastboot to reinstall CWM, but my computer does not recognize the phone more.
Could anyone help me?
-Using Google Translate:
Vinicius Neves said:
Hi, everyone, I'm new here but I've created a topic for anyone of you can help me.
My Xperial L stopped working after installing the new Cyanogenmod after restarted by CWM, the phone will not turn over, however, CWM lights still work, but when I press the volume buttons together, the lights go out and I can not open the CWM menu to make the recovery of the original ROM.
I tried another method, use fastboot to reinstall CWM, but my computer does not recognize the phone more.
Could anyone help me?
-Using Google Translate:
Click to expand...
Click to collapse
Hi,
First remove your battery and insert it back after 1 minute.
Then don't turn on your phone but try to connect to flashtool.
and flash stock ftf.
You should goog to go.
I have try many times, but not appear "The device has connected in Flash mode" menssage.
If the PC don't recognize my device, Flashtool not work.
Vinicius Neves said:
Hi, everyone, I'm new here but I've created a topic for anyone of you can help me.
My Xperial L stopped working after installing the new Cyanogenmod after restarted by CWM, the phone will not turn over, however, CWM lights still work, but when I press the volume buttons together, the lights go out and I can not open the CWM menu to make the recovery of the original ROM.
I tried another method, use fastboot to reinstall CWM, but my computer does not recognize the phone more.
Could anyone help me?
-Using Google Translate:
Click to expand...
Click to collapse
Did you unlock your bootloader before flashing?
Bang d thanks button above ☝✌
Yes. My device have:
Bootloader unlocked
Root
CMW
Overclock Thunderzap
32gb SDCard
The only problem is the entrance of usb cable of my device, he just recharge the device, he not work to do a boot.
The way I see is change the entrance try again, but now, I need find other way.
try to flash kernel that suits your ROM, connect your phone in fastboot mode and flash it with flastool
Vinicius Neves said:
Yes. My device have:
Bootloader unlocked
Root
CMW
Overclock Thunderzap
32gb SDCard
The only problem is the entrance of usb cable of my device, he just recharge the device, he not work to do a boot.
The way I see is change the entrance try again, but now, I need find other way.
Click to expand...
Click to collapse
Did you install the xperia L drivers in laptop?
Bang d thanks button above ☝✌
Unffortunaly, no. I have tried find the drivers in SONY website, but needs the PC Companion with UBS Cable on Device, but in that time, my phone has been crashed.
Vinicius Neves said:
Unffortunaly, no. I have tried find the drivers in SONY website, but needs the PC Companion with UBS Cable on Device, but in that time, my phone has been crashed.
Click to expand...
Click to collapse
You installed flash tool na?
Check d installation directory of flashtool and ull find drivers .......install it ....select xperia L option ...and install.
Then ull find drivers installed in pc !
Bang d thanks button above ☝✌
Q&A for Xperia C bricked while flashing recovery through mobile uncle
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Xperia C bricked while flashing recovery through mobile uncle. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
HELP! Xperia C Stuck on Sony Logo
Hello guys, can you help me fix my Sony Xperia C 2305 stuck in Sony Logo.
I'd already tried the Sony Companion but in the middle of installation it stopped.
What should i do?? Please! Thank you!
Sony Xperia C Unbrick
Hi... I came across this problem recently while installing CWM using MobileUncle Tools without changing the Boot-version. If your Boot-version is not supported, then you need to first convert it to the suitable Boot-version. There is a seperate Xperia C XDA thread on install CWM on both the Boot-versions. Now in your case, you have flashed a wrong recovery which has bricked your device.
Here is a step-by-step guide on how to un-brick your Xperia C. This worked for me. Hope it works for you too...
1. Firstly, remove the back-cover of your Xperia C and remove any sim or memory card, if connected.
2. Now, search for a small hole with "RESET" written below it.
3. Use a pen to press it. Hold it there for a minute. Then leave it and put the back cover back.
4. Charge your device for about 10 minutes.
5. If you do not follow the above steps, you won't be able to repair your device through PC Companion.(The update stops showing "Download error or error 1200). This is because your device still has MobileUncle Tools and unsupported Recovery image installed in it which does not allow the stock Recovery to be installed. When you reset by following the above method, only the stock apps are left in the device, deleting every other app.
6. Now download and install the latest Sony PC Companion from the official site, to your PC.
7. Open the PCC and click start in support zone. Let PCC download and install the required files.
8. In the next menu, select the software update option. Instead of clicking on install, select "Repair" device which is highlighted in blue.
9. Follow the steps until PCC starts to prepare your PC for software update.
10. In the device selection menu, select Sony Xperia C C2305 and click next.
11. When the next menu appears, disconnect any USB or multimedia drives attached to the PC. Now, first connect your original Sony USB cabel to the PC. Then, turn off your device(If the device is not turning off i.e. switching on after connecting the USB cable, read the instructions given at the end). Wait for five second. Press and hold volume down button of your device and connect the USB cable to your device. A green led appears on your device if the device is connected properly.
Note: If a continous red led appears instead of green, do not worry. Keep the device connected to PC intact for about 5 to 10 minutes. It will turn green. This is because, bricked devices take some time to be recognised.
12. Now the update process starts. If all the above steps are performed correctly, then surely the Device Software Update process completes without any errors or stopping in between.
13. Then click finish in the last menu after Device Software Update Completes.
14.Disconnect Xperia C from PC and press the Power button.
15. Xperia C boots up. Do not worry if your screen isn't the way it should be(e.g. whitish at the edges and the Sony Wave logo lagging). As this is the first boot-up after software update it takes sometime to recover to it's earlier charm. After about a minute or two, your device will be perfectly all right.
Note: The first boot-up takes some time(about 5 to 7 minutes).
16. So, this is it. You will have your Sony Xperia C perfectly working if you follow the above steps cautiously.
Hint for step no. 11: Follow this only if your device turns on after connecting the USB cable:
1. First, let the USB cable be connected the PC.
2. Force switch off your device by pressing Power + volume up buttons for about 10 to 15 seconds when it is stuck at Sony logo.
3. When the device turns off, immediately leave the two buttons and press and hold volume down button and connect the USB cable to the device, before the device turns on.
4. Now your device would be properly connected and the green led appears.
Hope this helps you. If you have any other queries regarding the same, please do inform.
my Xperia C is switchoff while flashing recovery from mobile uncle tools
I have downloaded the file 6mb recovery.img file and through mobile uncle tools i was updating... all was going well it ask me r u sure to flash i pressed ok and my phone became dead ...Now it is not starting....!!!!Plzzz Help me ....!!!:crying:
verondelarosa said:
Hello guys, can you help me fix my Sony Xperia C 2305 stuck in Sony Logo.
I'd already tried the Sony Companion but in the middle of installation it stopped.
What should i do?? Please! Thank you!
Click to expand...
Click to collapse
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
relly helped ,me guys thanks buddie
thanks bro, i m happy now my phone is working again
I hope it was useful (if it was so hitthank)
Just I want from you I little thing : give the link that you have download th ftf. from
n78 shadow said:
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
my flashtools shows drivers not found please help.
rkumbhar said:
my flashtools shows drivers not found please help.
Click to expand...
Click to collapse
Hi bro
You must install the flashmode, fastboot driver and your device driver in flashtool\drivers\Flashtool_drivers.exe
DON'T forget to install your device driver AND to hit thanks
Sent from my C2105 using XDA Free mobile app
n78 shadow said:
Hi bro
You must install the flashmode, fastboot driver and your device driver in flashtool\drivers\Flashtool_drivers.exe
DON'T forget to install your device driver AND to hit thanks
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
i installed all the drivers but still sony xperia c not getting detected
rkumbhar said:
i installed all the drivers but still sony xperia c not getting detected
Click to expand...
Click to collapse
It's not detected when Flashtool requests to connect the phone or not at all
If it's not detected when Flashtool requests to connect the phone try to connect it before the flashing proccess.
And don't forget to connect it in flashmode by holding the vol- key and connect it to Pc
Phone still not detected in Fastboot mode
I have installed all the drivers and tried. But my phone is not entering Fastboot mode or showing up in device manager. My phone is not turning on after flashing recovery using Mobile Uncle tools. The red light glows when usb plugged in.
fixed
OTE=ajithmemana;61619257]I have installed all the drivers and tried. But my phone is not entering Fastboot mode or showing up in device manager. My phone is not turning on after flashing recovery using Mobile Uncle tools. The red light glows when usb plugged in.[/QUOTE]
Ok don't worry I have the same problem before because I using Mobile uncle without change boot version thast leave the phone in charge sometimes after that connect it in the pc by cable then run PC combain it will guide you to connect the phone when the red light appear and download the original software as you know it will tell you to press the power key with the volume key until the phone connect with the program .
It work with me tell me if not
My Sony xperia C2305 ......keeps on Restarting.....plz help me...
My Sony xperia C2305 ......keeps on Restarting.....plz help me...
Unable to flash to...through "wmshua"...it gives me an error..."FLASH FAILED" and some times "CONNECTION UNSTABLE"
AND Also tried "Flash Tool" too.....it gives me an error ..........plz help
probably my phone is bricked because i tried using mobile uncle and opened up a recovery image downloaded from this site.. but now my phone is not booting... neither is giving any light while i plug in the USB
HELP ASAP
did not work for me xpria pc companion gives an error when i use software update .... after a big wait ... of initializing ... and the device alwayes gives red light ... for a time then after 10 miniutes it turns off .... i don't know what to do .. !!!
n78 shadow said:
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
Can you send me the link please [email protected]