Database Info

Bricked ur tipo/Problem in rooting/Want help on any topic Post Here!!!

Hi every one want help on ur Bricked tipo Or
Problem with Rooting or any thing u are facing
Feel Free and post here
I or any member might help You....
Xperia Miro And Xperia j users are also invited
Good Luck..:good:

help
hi all in my last thread friends in forum post to my questional thread the offical sony xperia tipo dual ftf i dawnload it
2nd: my phone dos'nt fast boot or flash mode if i connect usb + prees volume- no thing done please help me

cannot boot after unlock bootloader and flashing
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..

rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
Which build fxp are you using? Get latest, and use flashtool to fastboot kernel this time.
Some fxp build have boot.img problem.
Sent from my ST27i

joehoor said:
hi all in my last thread friends in forum post to my questional thread the offical sony xperia tipo dual ftf i dawnload it
2nd: my phone dos'nt fast boot or flash mode if i connect usb + prees volume- no thing done please help me
Click to expand...
Click to collapse
Switch off ur phone hold volume down and connect to pc ..(while holding volume-)..To enter in
Flashmode also sometime it take 2-3 time to connect
Did u get green notification light on ur phone..
Tell me If u get green light I will help u further.. .
If u donot get green light than what u r getting..

rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
Flash stock ftf first and then flash boot.IMG through flashtool of latest fxp205 and through cwm flash fxp Rom
Wipe data and cache.......
This method worked for me..

i try unlock bootloader but when i type this command "fastboot.exe -i 0x0fce getvar version" i don't take any response and i have the following message "waiting for device".

tassosmer said:
i try unlock bootloader but when i type this command "fastboot.exe -i 0x0fce getvar version" i don't take any response and i have the following message "waiting for device".
Click to expand...
Click to collapse
It is due to because ur drivers are not installed properly
See in device manager on ur pc if there is exclamation mark on ur device
If ur drivers are installed correctly than u can try this out
This method http://forum.xda-developers.com/showthread.php?t=1560613 is easy and there is no need of cmd etc:laugh:
By this u can unlock ur bootloader easily

no ting done
nishuy21 said:
Switch off ur phone hold volume down and connect to pc ..(while holding volume-)..To enter in
Flashmode also sometime it take 2-3 time to connect
Did u get green notification light on ur phone..
Tell me If u get green light I will help u further.. .
If u donot get green light than what u r getting..
Click to expand...
Click to collapse
no thing done or no light or nothing happens if i turn power only 3 led red lights !!:crying:

nishuy21 said:
It is due to because ur drivers are not installed properly
See in device manager on ur pc if there is exclamation mark on ur device
If ur drivers are installed correctly than u can try this out
This method http://forum.xda-developers.com/showthread.php?t=1560613 is easy and there is no need of cmd etc:laugh:
By this u can unlock ur bootloader easily
Click to expand...
Click to collapse
I tried this program yesterday but when i click "unlock BL" the program crashes.

joehoor said:
no thing done or no light or nothing happens if i turn power only 3 led red lights !!:crying:
Click to expand...
Click to collapse
Try on other USB ports
Try it with other USB data cable..
Try seus to repair ur phone if still can not
Then I'm afraid u have some hardware problem and u should go to Sony service centreAnd the problem can be of ur pc try on
Other pc if problem persist than bad luck u need to go to SC
Also try to disabe all USB ports and than enable them again in device manager on pc and reboot...
Good luck and tell us further more....

tassosmer said:
I tried this program yesterday but when i click "unlock BL" the program crashes.
Click to expand...
Click to collapse
I looked a bit at ur problem and this is with many other people
And all of them donot have fastboot mode driver installed correctly
click on the start menu, then right click on my computer, then click on manage from the drop down list, then in the window that pops up on the left hand side click on device manager.if u see unknown source or exclamation mark when u connect ur device
U can see this link http://forums.androidcentral.com/ve...ock-bootloader-root-verizon-galaxy-nexus.html for more description although it is for nexus but the process is same
Scroll down and see troubleshooting it might help u
Than ur drivers are not installed correctly
If drivers are installed than u must got a name like adb interface/bridge etc.
If this does not work than
Same as I said in above post
This problem can be caused by ur pc try this on any other pc
And install fastboot drivers or even u can use different USB ports some time USB ports donot work properly

Thank you for your advice. I did it. Now I face a big problem and i am terrified. I tried install fxp 205 but i made a mistake and my tipo doesn't work. My pc can't recognize it, so i can't flash ftf via flashtool. Please if you can help me!

tassosmer said:
Thank you for your advice. I did it. Now I face a big problem and i am terrified. I tried install fxp 205 but i made a mistake and my tipo doesn't work. My pc can't recognize it, so i can't flash ftf via flashtool. Please if you can help me!
Click to expand...
Click to collapse
What mistake have u done
Well can u enter flashmode I.e green notification light on tipo when u connect it
To pc with vol-
If it enters it is softbricked but if not
U are hard bricked no chance else repairing at service centre
If soft bricked still pc does not recognize see above post...

nishuy21 said:
What mistake have u done
Well can u enter flashmode I.e green notification light on tipo when u connect it
To pc with vol-
If it enters it is softbricked but if not
U are hard bricked no chance else repairing at service centre
If soft bricked still pc does not recognize see above post...
Click to expand...
Click to collapse
No, I can't do anything. I tried put phone to charge but nothing happened. i think that i made a hard brick. I entered to fastboot and i chose via flashtool to put boot.img but suddenly the phone turned off.

rinkumeher said:
i have a problem with booting my tipo ,i want to update with cm10 so i unlock boot loader with android sdk manager and after that flash it with this code "fastboot flash boot boot.img" and then "fastboot reboot" everything gone in fine result . but phone didn't reboot . only once i use power key it vibrate and indicate green led and nothing happen . and then no other things are working after remove battery and connect it i am able to use it with power key, flash mode and fastboot key. but do not able to reboot it .
i think it happen because i unlock bootloader and did not reboot it and flash it in that step ..
plz help me with this..
Click to expand...
Click to collapse
i am using cm10 fxp203
---------- Post added at 11:33 PM ---------- Previous post was at 11:20 PM ----------
nishuy21 said:
Flash stock ftf first and then flash boot.IMG through flashtool of latest fxp205 and through cwm flash fxp Rom
Wipe data and cache.......
This method worked for me..
Click to expand...
Click to collapse
thanks but i had deposit my cell in service center they told me that os is not detecting so they will replace motherboard of my cell, let see what will happen next whether they will charge me or not. bless luck for me

rinkumeher said:
i am using cm10 fxp203
---------- Post added at 11:33 PM ---------- Previous post was at 11:20 PM ----------
thanks but i had deposit my cell in service center they told me that os is not detecting so they will replace motherboard of my cell, let see what will happen next whether they will charge me or not. bless luck for me[/QUOTE
As long as you unlocked bootloader you lost warranty. Tomorrow i will go for bigger problem. I hope that the cost won't be too much.
Click to expand...
Click to collapse

tassosmer said:
No, I can't do anything. I tried put phone to charge but nothing happened. i think that i made a hard brick. I entered to fastboot and i chose via flashtool to put boot.img but suddenly the phone turned off.
Click to expand...
Click to collapse
Be sure if ur phone is hardbricked sometimes it looks like but it is not
If hard bricked.......
Go to Sony service centre and there is also one thing I have heard about
"Jtag" it can unbrick many hard bricked phones at very low cost...
Go for it if it is available in ur country..
Better luck next time

nishuy21 said:
Be sure if ur phone is hardbricked sometimes it looks like but it is not
If hard bricked.......
Go to Sony service centre and there is also one thing I have heard about
"Jtag" it can unbrick many hard bricked phones at very low cost...
Go for it if it is available in ur country..
Better luck next time
Click to expand...
Click to collapse
The only life sign of tipo is the vibration when i turn it on. This happened once today and once yesterday night.

I need driver's download link for xperia
Tipo please
Sent from my ST21i using xda app-developers app

[Q] XPERIA L bricked or what?

Hi everyone, I think I might have bricked my Sony XPERIA L after I tried to partition my External SD card. After partitioning it to Fat32 and Ext4, I put back my SD card into my phone but after that my phone like never turned ON. Without being able to boot into bootloader, I can't flash stock firmwares. Seeing from all other threads that my phone might be dead, I came across something different today. I plugged in my phone (either to a PC or a Wall Charger) and a 'Light' Green LED was lit. Does it mean that I can do something to bring it back to normal usage?
p.s I love my Xperia L

Anyone, pliss?

bassil.alzoubi said:
just flash a new firmware with flashtool
and your phone is not dead
Click to expand...
Click to collapse
That's the thing. My phone isn't being detected by PC. Phone doesn't go into Fastboot mode either.
Flashing via Flashtool didn't work.

bassil.alzoubi said:
so try another usb port or another usb cable
and double check your battery
i was facing this problem on my xperia arc
when i connect the phone to my the phone shows green led
i flashed my phone with a new ftf and its works
note : flashing the phone with flashtool need flashmode (volume down botton) not fastboot
and double check your drivers
hope your problem slove
sorry for my bad English:silly:
Click to expand...
Click to collapse
Tried many things.. But I sent it to repair and the guy said that I have an external issue. But Thanks!

WaleedAhmad98 said:
Hi everyone, I think I might have bricked my Sony XPERIA L after I tried to partition my External SD card. After partitioning it to Fat32 and Ext4, I put back my SD card into my phone but after that my phone like never turned ON. Without being able to boot into bootloader, I can't flash stock firmwares. Seeing from all other threads that my phone might be dead, I came across something different today. I plugged in my phone (either to a PC or a Wall Charger) and a 'Light' Green LED was lit. Does it mean that I can do something to bring it back to normal usage?
p.s I love my Xperia L
Click to expand...
Click to collapse
hi,
first of all connect your phone to pc in flashmode via flashtool !
now it will ask you automatically to select phone model !!
ok if still your phone is not recognized in flashtool then go continue and click on THUNDER ICON and select flash mode !!
now here again it can ask you ur phone mode ..
still if your device is not recognized then go continue .. and flash with your phone with original stock.. now here again it will ask yor model number !!
ok if still you are facing problem !! then cancel flash .. and again click on Thunder ICON ... and select FASTBOOT MODE ... and after clicking fastboot mode it will ask to remove your phone from pc and reconnect by pressing Volume UP button and hold then connect to pc .... now this time it will ask your model number or it will detect automatically !!
then install kernel again .. and rebot your mobile and start in boot mode .. and clean chache , clean to install new rom then select your rom and it's done !!
now i m sharing this with becoz i faced same issue and i was trying all way to get my phone on back ... so i had flowed these steps and it works !

My Xperial L has crashed, plz help.

Hi, everyone, I'm new here but I've created a topic for anyone of you can help me.
My Xperial L stopped working after installing the new Cyanogenmod after restarted by CWM, the phone will not turn over, however, CWM lights still work, but when I press the volume buttons together, the lights go out and I can not open the CWM menu to make the recovery of the original ROM.
I tried another method, use fastboot to reinstall CWM, but my computer does not recognize the phone more.
Could anyone help me?
-Using Google Translate:

Vinicius Neves said:
Hi, everyone, I'm new here but I've created a topic for anyone of you can help me.
My Xperial L stopped working after installing the new Cyanogenmod after restarted by CWM, the phone will not turn over, however, CWM lights still work, but when I press the volume buttons together, the lights go out and I can not open the CWM menu to make the recovery of the original ROM.
I tried another method, use fastboot to reinstall CWM, but my computer does not recognize the phone more.
Could anyone help me?
-Using Google Translate:
Click to expand...
Click to collapse
Hi,
First remove your battery and insert it back after 1 minute.
Then don't turn on your phone but try to connect to flashtool.
and flash stock ftf.
You should goog to go.

I have try many times, but not appear "The device has connected in Flash mode" menssage.
If the PC don't recognize my device, Flashtool not work.

Vinicius Neves said:
Hi, everyone, I'm new here but I've created a topic for anyone of you can help me.
My Xperial L stopped working after installing the new Cyanogenmod after restarted by CWM, the phone will not turn over, however, CWM lights still work, but when I press the volume buttons together, the lights go out and I can not open the CWM menu to make the recovery of the original ROM.
I tried another method, use fastboot to reinstall CWM, but my computer does not recognize the phone more.
Could anyone help me?
-Using Google Translate:
Click to expand...
Click to collapse
Did you unlock your bootloader before flashing?
Bang d thanks button above ☝✌

Yes. My device have:
Bootloader unlocked
Root
CMW
Overclock Thunderzap
32gb SDCard
The only problem is the entrance of usb cable of my device, he just recharge the device, he not work to do a boot.
The way I see is change the entrance try again, but now, I need find other way.

try to flash kernel that suits your ROM, connect your phone in fastboot mode and flash it with flastool

Vinicius Neves said:
Yes. My device have:
Bootloader unlocked
Root
CMW
Overclock Thunderzap
32gb SDCard
The only problem is the entrance of usb cable of my device, he just recharge the device, he not work to do a boot.
The way I see is change the entrance try again, but now, I need find other way.
Click to expand...
Click to collapse
Did you install the xperia L drivers in laptop?
Bang d thanks button above ☝✌

Unffortunaly, no. I have tried find the drivers in SONY website, but needs the PC Companion with UBS Cable on Device, but in that time, my phone has been crashed.

Vinicius Neves said:
Unffortunaly, no. I have tried find the drivers in SONY website, but needs the PC Companion with UBS Cable on Device, but in that time, my phone has been crashed.
Click to expand...
Click to collapse
You installed flash tool na?
Check d installation directory of flashtool and ull find drivers .......install it ....select xperia L option ...and install.
Then ull find drivers installed in pc !
Bang d thanks button above ☝✌

[Q&A] Xperia C bricked while flashing recovery through mobile uncle

Q&A for Xperia C bricked while flashing recovery through mobile uncle
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Xperia C bricked while flashing recovery through mobile uncle. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

HELP! Xperia C Stuck on Sony Logo
Hello guys, can you help me fix my Sony Xperia C 2305 stuck in Sony Logo.
I'd already tried the Sony Companion but in the middle of installation it stopped.
What should i do?? Please! Thank you!

Sony Xperia C Unbrick
Hi... I came across this problem recently while installing CWM using MobileUncle Tools without changing the Boot-version. If your Boot-version is not supported, then you need to first convert it to the suitable Boot-version. There is a seperate Xperia C XDA thread on install CWM on both the Boot-versions. Now in your case, you have flashed a wrong recovery which has bricked your device.
Here is a step-by-step guide on how to un-brick your Xperia C. This worked for me. Hope it works for you too...
1. Firstly, remove the back-cover of your Xperia C and remove any sim or memory card, if connected.
2. Now, search for a small hole with "RESET" written below it.
3. Use a pen to press it. Hold it there for a minute. Then leave it and put the back cover back.
4. Charge your device for about 10 minutes.
5. If you do not follow the above steps, you won't be able to repair your device through PC Companion.(The update stops showing "Download error or error 1200). This is because your device still has MobileUncle Tools and unsupported Recovery image installed in it which does not allow the stock Recovery to be installed. When you reset by following the above method, only the stock apps are left in the device, deleting every other app.
6. Now download and install the latest Sony PC Companion from the official site, to your PC.
7. Open the PCC and click start in support zone. Let PCC download and install the required files.
8. In the next menu, select the software update option. Instead of clicking on install, select "Repair" device which is highlighted in blue.
9. Follow the steps until PCC starts to prepare your PC for software update.
10. In the device selection menu, select Sony Xperia C C2305 and click next.
11. When the next menu appears, disconnect any USB or multimedia drives attached to the PC. Now, first connect your original Sony USB cabel to the PC. Then, turn off your device(If the device is not turning off i.e. switching on after connecting the USB cable, read the instructions given at the end). Wait for five second. Press and hold volume down button of your device and connect the USB cable to your device. A green led appears on your device if the device is connected properly.
Note: If a continous red led appears instead of green, do not worry. Keep the device connected to PC intact for about 5 to 10 minutes. It will turn green. This is because, bricked devices take some time to be recognised.
12. Now the update process starts. If all the above steps are performed correctly, then surely the Device Software Update process completes without any errors or stopping in between.
13. Then click finish in the last menu after Device Software Update Completes.
14.Disconnect Xperia C from PC and press the Power button.
15. Xperia C boots up. Do not worry if your screen isn't the way it should be(e.g. whitish at the edges and the Sony Wave logo lagging). As this is the first boot-up after software update it takes sometime to recover to it's earlier charm. After about a minute or two, your device will be perfectly all right.
Note: The first boot-up takes some time(about 5 to 7 minutes).
16. So, this is it. You will have your Sony Xperia C perfectly working if you follow the above steps cautiously.
Hint for step no. 11: Follow this only if your device turns on after connecting the USB cable:
1. First, let the USB cable be connected the PC.
2. Force switch off your device by pressing Power + volume up buttons for about 10 to 15 seconds when it is stuck at Sony logo.
3. When the device turns off, immediately leave the two buttons and press and hold volume down button and connect the USB cable to the device, before the device turns on.
4. Now your device would be properly connected and the green led appears.
Hope this helps you. If you have any other queries regarding the same, please do inform.

my Xperia C is switchoff while flashing recovery from mobile uncle tools
I have downloaded the file 6mb recovery.img file and through mobile uncle tools i was updating... all was going well it ask me r u sure to flash i pressed ok and my phone became dead ...Now it is not starting....!!!!Plzzz Help me ....!!!:crying:

verondelarosa said:
Hello guys, can you help me fix my Sony Xperia C 2305 stuck in Sony Logo.
I'd already tried the Sony Companion but in the middle of installation it stopped.
What should i do?? Please! Thank you!
Click to expand...
Click to collapse
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app

relly helped ,me guys thanks buddie
thanks bro, i m happy now my phone is working again

I hope it was useful (if it was so hitthank)
Just I want from you I little thing : give the link that you have download th ftf. from

n78 shadow said:
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
my flashtools shows drivers not found please help.

rkumbhar said:
my flashtools shows drivers not found please help.
Click to expand...
Click to collapse
Hi bro
You must install the flashmode, fastboot driver and your device driver in flashtool\drivers\Flashtool_drivers.exe
DON'T forget to install your device driver AND to hit thanks
Sent from my C2105 using XDA Free mobile app

n78 shadow said:
Hi bro
You must install the flashmode, fastboot driver and your device driver in flashtool\drivers\Flashtool_drivers.exe
DON'T forget to install your device driver AND to hit thanks
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
i installed all the drivers but still sony xperia c not getting detected

rkumbhar said:
i installed all the drivers but still sony xperia c not getting detected
Click to expand...
Click to collapse
It's not detected when Flashtool requests to connect the phone or not at all
If it's not detected when Flashtool requests to connect the phone try to connect it before the flashing proccess.
And don't forget to connect it in flashmode by holding the vol- key and connect it to Pc

Phone still not detected in Fastboot mode
I have installed all the drivers and tried. But my phone is not entering Fastboot mode or showing up in device manager. My phone is not turning on after flashing recovery using Mobile Uncle tools. The red light glows when usb plugged in.

fixed
OTE=ajithmemana;61619257]I have installed all the drivers and tried. But my phone is not entering Fastboot mode or showing up in device manager. My phone is not turning on after flashing recovery using Mobile Uncle tools. The red light glows when usb plugged in.[/QUOTE]
Ok don't worry I have the same problem before because I using Mobile uncle without change boot version thast leave the phone in charge sometimes after that connect it in the pc by cable then run PC combain it will guide you to connect the phone when the red light appear and download the original software as you know it will tell you to press the power key with the volume key until the phone connect with the program .
It work with me tell me if not

My Sony xperia C2305 ......keeps on Restarting.....plz help me...
My Sony xperia C2305 ......keeps on Restarting.....plz help me...
Unable to flash to...through "wmshua"...it gives me an error..."FLASH FAILED" and some times "CONNECTION UNSTABLE"
AND Also tried "Flash Tool" too.....it gives me an error ..........plz help

probably my phone is bricked because i tried using mobile uncle and opened up a recovery image downloaded from this site.. but now my phone is not booting... neither is giving any light while i plug in the USB
HELP ASAP

did not work for me xpria pc companion gives an error when i use software update .... after a big wait ... of initializing ... and the device alwayes gives red light ... for a time then after 10 miniutes it turns off .... i don't know what to do .. !!!

n78 shadow said:
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
Can you send me the link please [email protected]

Sony Xperia E3 Bricked

I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.

Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.

Flash stock rom it'll unbrick it

#4
Thank you answer back! I did exactly the following:
The model is my Xperia E3 D2212 dual sim.
- Unlocked the bootloader, :laugh:
- CWM installed a custom recovery, :laugh:
- I reinstalled the original rom, :laugh:
- I made a backup of the entire system using CWM.
And everything went super normal way, without complications.
The mistake was when he wanted to installing a custom ROM called "AOSP_L_MR1_150718_flamingo" because I found out later that he had not read that it was for ANOTHER XPERIA as follow the you tube tutorial . The ROM's for another Xperia, if I remember correctly.
After doing the installation process of the new AOSP ROM, the phone is less than a minute on the logo of SONY XPERIA down with, looped, can not enter the bootloader, and no longer recognizes the PC. I can not recognize it at FlashTool. I think that's all. :crying:
I greatly appreciate your attention.
I ended up editing this text in the google translator, then I'm sorry, if you are not very good.
Thank you

Matteus Maximo Felisberto said:
I tried to put AOSP 5.1 from FXP in my phone, and my cellphone bricked. It wont turn on, it keeps the Sony Logo 2 seconds. It haven't connection with flashtool. Please Help me.
Click to expand...
Click to collapse
Someone can help me please?

nibeal said:
Hi. Can you give me more information what you did exactly step by step. So maybe i can help you. My E3 was bricked too. I found a solution. But i need more information.
Click to expand...
Click to collapse
Could you help me? I can not make the pc recognize him ... He barely turns on and off since. The PC Companion software tells recognize it, but when you are installing the software says "it is not possible for this phone is changed." I can not scessar the bootloader does not give time and it shuts down.

Thanks, my error was with the fastboot driver and adb in flashtool. The Windows drivers wasn't been recognized, I've to install the drivers, all of they. After this, I Flashed the Stcok ROM, installed SuperSU and Restored the backup, everything works fine and fluid now. Thanks, anyway, for encouraging me.

I flashed my D2203 back to factory rom yesterday using Flashtool (flashtool.net/downloads.php) on Windows 7 PC.
How did I do it:
1) Install flashtool
2) Install Flashtool-drivers.exe from flashtool subfolder /drivers and select flashmode and fastboot drivers.
3) Run Flashtool and open XperiFirm (letters XF on logo)
4) Select Xperia E3 Flamingo -> proper D22** you have -> Market -> and select latest release below PayPal logo
5) Press "Download" and wait for download and unpacking
6) Switch off phone (if power on/off button does not respond then open back cover and push "OFF" by using pen)
7) Press and hold volume down button and connect phone to PC using original USB cable
8) Using Flashmode flash device