[Completed] Can't exit No command screen mtk 6585 - XDA Assist

i have a hdc s6 mtk 6582 and it wont come off of the no command screen. i tried key combinations and tried restarting but still cant come off no command screen.it started when I was trying to factory reset but ended selecting the wrong option because the instruction on the screen for the buttons was wrong. i got the stock rom.pls help!!!!!!!!!!!!!!!1

shansingh1100 said:
i have a hdc s6 mtk 6582 and it wont come off of the no command screen. i tried key combinations and tried restarting but still cant come off no command screen.it started when I was trying to factory reset but ended selecting the wrong option because the instruction on the screen for the buttons was wrong. i got the stock rom.pls help!!!!!!!!!!!!!!!1
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Sounds like the option pressed by mistake was along the lines of "format system". Hopefully when you say you "have the stock rom" you mean you have a copy of the firmware. Because the stock ROM on the device probably is not any more.
I don't know if this Samsung clone would have download mode. Can try holding in both volume buttons and connecting the device to a PC while it is powered off. That should give you something other than what you are currently getting. What to do from there, well, you may need to get the files from HDC.
I would try this thread, since I cannot find any S6's with that chipset number:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Q] HDC S5 G900F Clone MTK 6582 QuadCore
...particularly this post.
Any questions can go in this thread as well.
Hope this helps, and good luck!

Related

[Completed] (Help) S5 Chinese clone recovery

I have recieved a new phone recently that decided to go into a boot loop after unplugging from charger this morning. Everything was working fine until this. I can not seem to find the recovery menu/reboot into recovery mode. If I hold the volume -, and power button I get a menu in chinese that appears to be for testing and "resetting eMMC". Is there anyone who may know how to enter recovery with this device? The manufacturer is unknown (appears as ALPS in android settings), model number H900. The device has mtk6592 CPU mali-450mp gpu, 2GB ram, 1080p display. Should I go ahead and RMA it? If anyone can translate Chinese I can post pictures of the menu I am able to boot into, however it does not appear to be the standard android recovery menu. Any help would be appreciated!
Since we do not have a forum for your device, please post in
General discussion > Questions and Answers
so that the right experts may be of help.

[Completed] [Q] Boot Menu.

Hey guys venky here.I have got a lenovo s850.It has android version kit-kat.I have rooted it and for some days it was running well then i downloaded "ROM toolbox" from play store.I installed it and there was option to change resolution.I put it to "1080" and it rebooted my phone after rebooting it all the icons in it are Very huge and it also shows that "Lenovo launcher is not respoding","Lenovo Widgets are not responding" etc.,and if i try to factory reset it It shows "Have been in Meta mode,Long press power button and normal boot...Please help i want to reset or have any solutions pleae help me :crying::crying:
Hi,
Most devices stock dpi is in the 250 to 400 range or so.... You've gone way beyond a dpi that is functional. So yes... Much would be wrong.
If a factory reset didn't fix it, you likely need to flash your stock firmware again to fix this.
I can't find anything relevant on XDA to help you with that, so you will need to ask for help here ,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thanks...Is there no other way to factory reset?
On your device I don't know. Usually you do it from the custom recovery. If it's not changing you dpi... You need to ask for further help in the section I linked. ?
Ok can you atleast tell me why is it showing "Have Been in meta mode,Long press the power button and the normal boot".It happens when i press the volume down key,home button and the power button.
You've asked where I suggested... You can only be patient now.
Good luc!
Anyways Thanks alot for your time
Thank you. Thread closed.

[Completed] GT-8010 Stuck in Odin Screen

Hi guys have a bit of a problem with my tab,
I have tried to factory reset it as it was running slow. (never been rooted or touch from standard) and it has just sat me on a "Downloading... Do not turn off target" screen, for the past 15 hours!!
I have tried holding power button + Volume Down to get into a recovery mode but screen just flashes then pops up with the same message.
I have been looking through the internet at loads of different posts trying different things with no joy. Only hoping that with the post being relatively old now someone may have a new way to fix this issue.
Okay here is what i have found out to help anyone help me...
It is not connecting to Kies it registering a device there but eventually pops up with a message saying "device taking to long to respond".
It is registering in device manager (see picture)
Have tried to use one of the guides from here to go through Odin and upload Rom to it,
this is the rom i used : N8010XXUDNE4_N8010BTUDNF1_HOME.tar.md5
When it was going through it said Failed to partition.
Did some more googling and searching and found a PIT file and tried again.
This failed.
Completely stuck now don't no what to do so any help would be great.
Hi there,
You'd be best served asking for help from the experts who own your device here:
Galaxy Note 10.1 Q&A, Help & Troubleshooting
First read this thread: Guide - Installing Firmware, CWM recovery & Rooting
Good luck

[Completed] Chuwi vi8 infinite reboot

hello
so last time i wanted to install that "touch fix" for my Chuwi vi8, after a reboot my tablet wasn't able to boot anymore, it just won't stop top reboot, i can still boot to Windows with lock+up volume + home button, i can also go in the stock recovery mode, yes i already tried factory reset and it didn't worked, how can i fix it ? i already searched on google but i need to get clockworkmode... BUT HOW ??? i can't boot in android !!!...
JeanEudesExpire said:
hello
so last time i wanted to install that "touch fix" for my Chuwi vi8, after a reboot my tablet wasn't able to boot anymore, it just won't stop top reboot, i can still boot to Windows with lock+up volume + home button, i can also go in the stock recovery mode, yes i already tried factory reset and it didn't worked, how can i fix it ? i already searched on google but i need to get clockworkmode... BUT HOW ??? i can't boot in android !!!...
Click to expand...
Click to collapse
Hello
I'm sorry but I can't find anything related to your question/device.
> Android Development and Hacking > Android Q&A, Help & Troubleshooting or General Q & A thread
-Vatsal
so my tablet is dead ? ...
JeanEudesExpire said:
so my tablet is dead ? ...
Click to expand...
Click to collapse
You may ask for assistance in above thread or forum.

[Completed] My Galaxy S6 is bricked i guess :s.

Hello everybody, since few weeks, i found that my Smartphone wasn't detected by any computer when i'm using USB, it was charging but nothing more.
I tried to restore it but it failed, so now i can't boot anymore on system. Odin never detect it.
Only things i can do with the phone is rebooting in download mode and recovery too, i can't flash it cause of USB.
Sure i've already tried to uninstall drivers, reinstalling, changing cables, but nothing changed.
Smartphone is a G920F Samsung Galaxy S6.
If there is any solution to kick his ass back, let me know .
Hi there and welcome to Assist,
Try this:
Power down your phone completely, boot up in download mode (power + home + volume down).
Open Smart Switch and click on "More" on the right upper side of the window, "Emergency software recovery and initialization".
Click on the "Software update and initialization" tab.
Insert the model of your phone, e.g. SM-G920F and click search.
Now insert the S/N of your phone. You can see it on the bottom back of your phone. Click confirm and it will Download the latest stock firmware for your phone.
From this point on it's self explanatory. You have to be patient because it's a long process.
You'll have to create an account to post in the main forums.
> Samsung Galaxy S6 > Galaxy S6 Q&A, Help & Troubleshooting
Good luck

Categories

Resources