[Completed] GT-8010 Stuck in Odin Screen - XDA Assist

Hi guys have a bit of a problem with my tab,
I have tried to factory reset it as it was running slow. (never been rooted or touch from standard) and it has just sat me on a "Downloading... Do not turn off target" screen, for the past 15 hours!!
I have tried holding power button + Volume Down to get into a recovery mode but screen just flashes then pops up with the same message.
I have been looking through the internet at loads of different posts trying different things with no joy. Only hoping that with the post being relatively old now someone may have a new way to fix this issue.
Okay here is what i have found out to help anyone help me...
It is not connecting to Kies it registering a device there but eventually pops up with a message saying "device taking to long to respond".
It is registering in device manager (see picture)
Have tried to use one of the guides from here to go through Odin and upload Rom to it,
this is the rom i used : N8010XXUDNE4_N8010BTUDNF1_HOME.tar.md5
When it was going through it said Failed to partition.
Did some more googling and searching and found a PIT file and tried again.
This failed.
Completely stuck now don't no what to do so any help would be great.

Hi there,
You'd be best served asking for help from the experts who own your device here:
Galaxy Note 10.1 Q&A, Help & Troubleshooting
First read this thread: Guide - Installing Firmware, CWM recovery & Rooting
Good luck

Related

[Completed] [Q] i need help for my huawei y200 :(

hey guys.
so this is my problem....
my friend just bought this phone which it need to be open lined.
then he went to a technician to open his new phone..
after that his starting screen went green with a red square and a blue square.
everything went okay..but days has passed his phone freezes at that screen but i can still access the recovery mode that the technician made.
so i researched one of your forums and i got some suggestions.
done the wipe data and other methods to fix the boot loop/soft brick.
but nothing happens.
i tried to download the official firmware and installed it to flash it back to stock.
but this happens.
it reaches 1/4 of the bar in the downloading process.
how to fix it?
and can you please answer me step by step?
thanks
I do think its sounding like hardware issue.
Please post in Android Q&A, Help & Troubleshooting
so that the right experts may be of help.

[Completed] [Q] Galaxy note 2 ATT I317 stuck on power up

i have tried to root my phone, then got error message about su has stopped, so i tried following directions to unroot, i have downloaded several stock firmwares, 1 worked and brought my phone back to OS 4.1.1, i thought it was fixed and unrooted, so i did software update, and now stuck on power up, i have tried to go back and download the 4.1.1 back on it with no success, i cant even get in recovery mode. i have tried kies, and that doesnt work, have searched and nothing is helping, or spending hours downloading stock firmware that does not work, it will either fail, and 2 of them do say pass, but phone still locked on power up. any help would def be appreciated
Hi,
You should definitely ask for help in your device section Q&A, so the experts who own your device can assist you,
http://forum.xda-developers.com/galaxy-note-2-att/help
Keep in mind Odin will usually fail if Kies is running. End all kies processes in you pc's task manager.
Good luck!
Thank you. Thread closed.

[Completed] [Q] I've tried everything and looked everywhere

Hey everyone, I'm using a GT-P5100 (3G + Wifi) O2 UK rooted tablet and for the last month it has been broken. It started rebooting itself randomly every now and then, and then suddenly it wouldn't even boot up for 15 seconds before it would restart itself again.
I am able to get into safe mode and I can get into the boot options, but when I factory reset it does nothing, I've tried from the boot menu, from safe-mode options and even from the dial up code.
I tried to connect my tablet to my PC as a media device and format it but that didn't work either; I can't connect it as a disk then format it that way because they took out 'mass storage mode' on this firmware.
I then tried to flash a stock ROM in Odin but every time I tried it would fail until I used Odin.v1.3, but guess what, it rebooted itself and my entire tablet is still exactly the same.
(the option was on AP ram in v1.3 not AP nand I don't know if that makes a difference.)
If anyone can point me in the right direction I would appreciate it so much. I have been trying for weeks to fix this and I just don't know what to do anymore, I tried on another forum but nobody answered me.
Hi,
This would be best posted in your device section so the experts who own your device can help. I will request this be moved to here,
> Samsung Galaxy Tab 2 > Galaxy Tab 2 Q&A, Help & Troubleshooting
Make sure kies is not running to use Odin. End all kies processes in your task manager on the pc.
Good luck!
Thank you very much I have posted it there instead ^^
Thank you. Thread closed.

[Completed] Phone is stuck at "Samsung Galaxy SIII" screen

I rooted my phone to enter to custom CWM recovery mode via ODIN . Just after i tried to install a zip file "LockscreenEffect_OneHand_GS3_4.3_MK6_v4" (ink effect on the lock screen". It appeared to be installed successfully but when i start my phone again the very first thing i faced is that i was not getting signal coverage any more. "Setting options" stopped working and always throwing as error "unfortunately settings has stopped working". I thought of factory reset it via CWM recovery mode but now nothing is happening and phone has got stuck on the same screen "Samsung Galaxt SIII" pls pls pls pls pls help
Hello, and welcome to XDA Assist! It sounds as if you may have to reflash stock firmware to restore your phone, but I would recommend you ask your question in the dedicated help forum for your device first, in case someone has a better idea: Galaxy S III Q&A, Help & Troubleshooting. You will need to register to post there.
Good luck!

[Completed] Need help with Galaxy Tab s SM-T700

I'm just getting started trying to root my Galaxy Tab S SM-T700, and I have run into a couple problem.
I have installed the USB drivers from Samsung, and I have downloaded and extracted CF_AutoRoot to my desktop.
Now the website I was using to tell me how to do it says that next I need to download the CWM Recovery Image, which brought me to this site.
When I click the link to download it, I get a blue/purple screen saying Access Denied.
Also it says that I have to enter download mode on my Tab S by powering down, then turning it back on holding the power_volume down buttons, and this does not seem to work, it just turns on, but it stays on the powering on splash screen until I release the buttons, and when I release the buttons, it just powers on like normal.
I was going to link a screen shot of the Access Denied thing, but this forum will not let me.
Hi,
Try posting your question here:
Galaxy Tab S Q&A, Help & Troubleshooting
The experts there may be able to help.

Categories

Resources