hey guys.
so this is my problem....
my friend just bought this phone which it need to be open lined.
then he went to a technician to open his new phone..
after that his starting screen went green with a red square and a blue square.
everything went okay..but days has passed his phone freezes at that screen but i can still access the recovery mode that the technician made.
so i researched one of your forums and i got some suggestions.
done the wipe data and other methods to fix the boot loop/soft brick.
but nothing happens.
i tried to download the official firmware and installed it to flash it back to stock.
but this happens.
it reaches 1/4 of the bar in the downloading process.
how to fix it?
and can you please answer me step by step?
thanks
I do think its sounding like hardware issue.
Please post in Android Q&A, Help & Troubleshooting
so that the right experts may be of help.
Related
Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Thanks in advance.......
Hi,
I can't find a relevant thread on XDA for your issue, so you'll need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.
I made an account to solve my problem here, therefore you guys would do me a HUGE favor if you solve my problem here..
I have a GT-I9505 that I bought 2 years ago and flashed the Lollipop 5.0.1 ROM via odin about a month ago, a few days later I rooted my phone via Kingo ROOT and everything was working fine but my date & time keeps changing to February 2014.
Two days ago I tried booting into Recovery Mode for the first time after rooting and I see that Android laying down with a red caution sign, I clicked on "reboot system now" and that's when my problem started. (it's not a custom recovery like TWRP, just the regular one)
As soon as I rebooted my phone I get a BLANK SCREEN with "Unfortunately, ........... has stopped", more like it was like this for all of my apps. I couldn't find a way to solve this but then I resorted to extracting my files and then factory resetting my phone, unfortunately I couldn't find a solution to access my phone until a miracle happened and made my phone working again. Everything went well till today when I tried rebooting into recovery mode but the SAME exact problem happened, what to do here? I have no problem of resetting my phone again but I don't want the same problem again.
Hi
Thanks for writing to us at XDA Assist. The best place for your question would be the S4 help thread here:
[HELP THREAD] Galaxy S4 | Ask any question | Noob friendly.
Thread closed, thanks.
Hi guys have a bit of a problem with my tab,
I have tried to factory reset it as it was running slow. (never been rooted or touch from standard) and it has just sat me on a "Downloading... Do not turn off target" screen, for the past 15 hours!!
I have tried holding power button + Volume Down to get into a recovery mode but screen just flashes then pops up with the same message.
I have been looking through the internet at loads of different posts trying different things with no joy. Only hoping that with the post being relatively old now someone may have a new way to fix this issue.
Okay here is what i have found out to help anyone help me...
It is not connecting to Kies it registering a device there but eventually pops up with a message saying "device taking to long to respond".
It is registering in device manager (see picture)
Have tried to use one of the guides from here to go through Odin and upload Rom to it,
this is the rom i used : N8010XXUDNE4_N8010BTUDNF1_HOME.tar.md5
When it was going through it said Failed to partition.
Did some more googling and searching and found a PIT file and tried again.
This failed.
Completely stuck now don't no what to do so any help would be great.
Hi there,
You'd be best served asking for help from the experts who own your device here:
Galaxy Note 10.1 Q&A, Help & Troubleshooting
First read this thread: Guide - Installing Firmware, CWM recovery & Rooting
Good luck
My problem started with changing my Screen DPI using an app, I accidentally set the dpi to a low number . that made my screen smaller and the icons to get bigger, in short I can click on anything. Phone is practically unusable now. My phone is Rooted but I don't remember if I had USB debugging on. My PC Can't detect my phone on ADB Tried installing and uninstalling with no luck. I can connect using Fastboot Mode though. and for the recovery method, My phone only displays an Android with his Belly open and a big red exclamation mark on top of it. I desperately need help. I know I can fix this by just flashing a stock rom but I can't find any online, theres also no Custom Rom that supports my phone model. so Please help, I tried everything I could.
Hi,
Try posting your question here:
Android Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!
Hi Guys
Can someone point me in the right direction with a problem with my new phone.
Basically I recently bought a ulefone Vienna (1 month and my 1st Android phone). It was working fine and on the stock rom and no changes to the system. Yesterday I did a OTA update and now my phone is stuck in a bootloop.
The phone just restarts and after after the company logo I get the Android man with an exclamation mark.
I have downloaded all the stuff to flash the phone from ulefone but as the phone keeps restarting and rebooting I can not get the PC to install the drivers.
The PC recognises the phone when the company logo is on the phone and starts to install the drivers but when I get the Android man the PC says the phone is unplugged.
I am IT literate and don't mind getting my hands dirty but I am a recent convert to Android. I want to fix the issue myself because that's the way to learn but I am a little out of my depth.
I have read that ADB can stop the boot sequence so any pointers to what I need to read and understand to fix this issue would be greatly appreciated.
Thanks.
The_Bionic_Man said:
Hi Guys
Can someone point me in the right direction with a problem with my new phone.
Basically I recently bought a ulefone Vienna (1 month and my 1st Android phone). It was working fine and on the stock rom and no changes to the system. Yesterday I did a OTA update and now my phone is stuck in a bootloop.
The phone just restarts and after after the company logo I get the Android man with an exclamation mark.
I have downloaded all the stuff to flash the phone from ulefone but as the phone keeps restarting and rebooting I can not get the PC to install the drivers.
The PC recognises the phone when the company logo is on the phone and starts to install the drivers but when I get the Android man the PC says the phone is unplugged.
I am IT literate and don't mind getting my hands dirty but I am a recent convert to Android. I want to fix the issue myself because that's the way to learn but I am a little out of my depth.
I have read that ADB can stop the boot sequence so any pointers to what I need to read and understand to fix this issue would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
Hi,
I couldn't find much information about your device here except these two threads:
Ulefone Vienna - Development & Support
Ulefone Vienna - Information & Reviews
Try posting your query in the support thread. Experts there may be able to assist you.
Good luck
Art Vanderlay
XDA Assist