My problem started with changing my Screen DPI using an app, I accidentally set the dpi to a low number . that made my screen smaller and the icons to get bigger, in short I can click on anything. Phone is practically unusable now. My phone is Rooted but I don't remember if I had USB debugging on. My PC Can't detect my phone on ADB Tried installing and uninstalling with no luck. I can connect using Fastboot Mode though. and for the recovery method, My phone only displays an Android with his Belly open and a big red exclamation mark on top of it. I desperately need help. I know I can fix this by just flashing a stock rom but I can't find any online, theres also no Custom Rom that supports my phone model. so Please help, I tried everything I could.
Hi,
Try posting your question here:
Android Q&A, Help & Troubleshooting
The experts there may be able to help.
Good luck!
Related
Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Thanks in advance.......
Hi,
I can't find a relevant thread on XDA for your issue, so you'll need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.
It seems like there is no Android installed on it whatsoever. I can go to recovery mode. When I try to turn it on, it just shows the GoClever booting image and that's it, it stays like it permanently. I haven't found the stock firmware for it, does it even exist? Also I don't think it's possible to install a custom recovery on it.
Can this thing even be called a tablet?
AMartian said:
It seems like there is no Android installed on it whatsoever. I can go to recovery mode. When I try to turn it on, it just shows the GoClever booting image and that's it, it stays like it permanently. I haven't found the stock firmware for it, does it even exist? Also I don't think it's possible to install a custom recovery on it.
Can this thing even be called a tablet?
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. For the best results, I ask that you repost your question here:
Android Q&A, Help & Troubleshooting
You'll receive expert advice there. Good luck!
Hello,
I got a dreadful malware on my phone that takes it over almost completely, a hand cursor appears on the top right of the screen and it downloads apps left and right even if I disable download from unknown sources.
I have done a factory reset and that thing is still there, I can't seem to flash a ROM with all the tools I found online, flashify does not see the zip file, ROM manager does not work either. I have tried to follow various tutorials but always arrive at a standstill, the recovery apps just don't seem to see anything but folders.
My phone is a Jiayu F2, on the official site they recommend to flash with SP flashtools but I can't use that since my USB port is broken.
Are there any other options? I have superuser enabled, can do very little with my phone except in safe mode. Airplane mode tames the malware a little but not completely.
Malwarebytes does not see anything wrong with my phone anymore ( there used to be a riskware), yet it's still completely unusable.
Can someone help me please? I'm getting desperate and can't buy a new phone before 2 weeks
Thanks
Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
I've been trying to get SuperSU on my new phone for hours yesterday and hours today and it seems that absolutely every method I try has some kind of error somewhere and it's getting extremely frustrating. The only actual root I've been able to accomplish is with Kingroot, but I only wanted to use that to install SuperSU and then uninstall Kingroot with it, but it refused to install so I just uninstalled Kingroot and am back at square one.
After literally hours I finally managed to get ADB to see my LG Pheonix 2 so that I could boot in to recovery mode. That is seemingly the only way to do it (besides Kingroot) because I've found absolutely nothing anywhere specifying how to do this with the buttons on the phone and no known methods for other phone models have worked on mine. Well, I'm finally into it, but to no surprise there's another problem--the dead Android icon is displayed over a black background without the recovery menu. I have some hope left that if I can access the recovery menu I'll be able to root my device with SuperSU. So, with that said, how can I make the recovery menu come up when I'm on the screen with the dead Android logo?
Also, my phone doesn't seem to have any fastboot or bootloader page either. All it does is reboot the device like normal
Any help would be extremely appreciated :crying:
Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Hello everyone,
Many thanks for taking the time to read about my problem. I have a ZTE Blade S6 phone and for some reason, it does not bootup properly. I would like to know if it is possible to use ADB commands to copy files from it? Also, what drivers am I missing?
This is the current situation - When I power it on, the ZTE logo shows up with a white background and it is stuck on that forever, I have let it stay that for more than 8 hours and no luck. Have tried the following already:
1. Volume+ and Power button to load into "recovery" mode and tried to wipe cache partition and reset to factot reset - No change and the problem still remains
2. Tried selecting the "bootloader" option, and the screen goes blank. However, on Windows PC it does detect a usb device however I am not sure if it is supposed to show as "Kedacom USB Device" - "Android Bootloader Interface". I tried another Samsung Android device and it does show up on the devices list under the "Android" section.
Could you please help me to restore the Official ROM so that my phone can be used again? ADB command does not seem to detect the device and so I am not sure what I am doing wrong. It will be really helpful to get some advice. Thanks again.
Hello and thank you for using XDA Assist,
please post your question in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist