I have recieved a new phone recently that decided to go into a boot loop after unplugging from charger this morning. Everything was working fine until this. I can not seem to find the recovery menu/reboot into recovery mode. If I hold the volume -, and power button I get a menu in chinese that appears to be for testing and "resetting eMMC". Is there anyone who may know how to enter recovery with this device? The manufacturer is unknown (appears as ALPS in android settings), model number H900. The device has mtk6592 CPU mali-450mp gpu, 2GB ram, 1080p display. Should I go ahead and RMA it? If anyone can translate Chinese I can post pictures of the menu I am able to boot into, however it does not appear to be the standard android recovery menu. Any help would be appreciated!
Since we do not have a forum for your device, please post in
General discussion > Questions and Answers
so that the right experts may be of help.
Related
BRICKED 7inch Irola Tablet...PLEASE HELP
I am in DIRE need of some help with my tablet. I received this irola dx752 tablet bricked and cannot fix it for the life of me. I am able to hold power and volume up and get into recovery system version 4.2.01. I Have tried a factory reset and a wipe system cache and the tablet just reboots to the green robot with and exclamation mark. If I press volume up, it brings me back to the system recovery. Now i am not very versed in ADB but I tried to sideload just about every firmware I could find for an a13 allwinner a8 cortex 7inch tablet, since the irola website has taken down its firmware. Also, fastboot will not work on this tablet whatsoever (it just says waiting for device) when i enter any command. I have never seen this tablet boot into a rom of any kind and therefore cannot tell if USB Debugging was ever enabled. I also Have tried different drivers but the one that seem to hold is the Android ADB Interface. CAN ANYONE PLEASE GIVE ME SOME SUGGESTIONS OR SOME HELP? It would be greatly appreciated. Thank you.
Hi,
I can't find anything relevant on XDA for your device and issue, so you will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Hi everybody!
I flashed (with RKAndroid Tool) this one: Oma_RK3026_Dragontouch_R93_KK_4.4.2_v1.0_gen2 loader
to my VERO AR 717 tab (sold in Greece) with the foillowing specs:
rockchip RK 3026
512 MB DD3
8 GB
7" TFT LCD (800x480) capacitive
Android 4,4
Actually, STEP 4 of the instructions did not happen.
So I ticked from parameter to recovery(anything apart from loader and back up) and pressed RUN
All went well.
However, device is not booting.
Strangely, Morobobo soft recognizes the tab as Nexus 7 and lists all the apps and etc..
RKBatch Tool v 1,7 also connects to the tab.
Any ideas please?!
Thank you!
Hi again!
Sorry for reposting.
On addition to the info provided above, the following:
Fastboot does not detect the devise
On the other hand the AndroidTool that came with the rom detets the device,runs the test ok, loads recovery however I can not get it to boot using any hard key combination(reset button + power +vol up or eset button + power, or reset button + power down or reset button + power+both vol)
I CAN ACCESS THE FILES THROUGH MOBOROBO
BUT
NO BOOT :crying:
Is it that I might have flashed the wrong bootloader..???
Thank you
Hi there,
I'm sorry but I can't find anything relevant to your question/device.
Please post that in the forum bellow for more answers from the experts :
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
hello everyone
I have an android box which is a no name chinese one RK3066 cortex A9 8GB android 4.1. it's been stuck on boot logo and since there is no reset or power or volume button on it I couldn't get it to recovery mode.
however when I opened the device, I could see two holes which said recovery. when I used a pin to connect those two I got into recovery mode
the device goes to recovery mode but the only thing I see is an android guy resting and no option.I checked evey where and they all suggest to press power button to go to menus but my device has no button on it.
I used a same device and using Online Nandroid Backup I made a backup of the ROM and put it in a 16GB SD card root. the files are boot.img kernel.img recovery.img recoverlog.log. I put all these files on the SD card hoping that once into recovery mode the recovery automatically starts. maybe it should be packed or something, I don't know what is the format of a ROM file. it seems that it should be a zip file
I found another set of holes which are three and underneath is said DEBUG. I assume it's same as debug mode which normal android phone or tablets connect to the PC using micro usb cable which comes with them and since my device doesn't have micro USB I suppose this is the way of connecting to PC so perhaps through RK Batch tool something can be done but I don't know how it works.
I bought a male to male USB cable and cut one side which found three cables. Black, White and Green. but I don't know what is the sequence and I tried everything possible solution
I appreciate if anyone could help me with this
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in one of the links bellow for more answers from the experts:
[Ask Any Question][Newbie Friendly]
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
You already posted in one of the right threads where is discussed about that. Wait there an answer.
Good luck
First of all i have no knowledge on how to fix my phone or flashing.
My question title are based on what i read from other threads.
My Problem
Connected Phone to USB to Charge
Removed Phone from USB
Lock Screen wont appear
Decided to Reboot the phone
After Rebooting, I got stuck at loading/bootloading screen
Decided to go to Factory menu by holding Vol Down and Power
Chose Reboot Option
After that, the phone rebooted nonstop like 5 times and turned off.
Now my phone won't charge, or power up
Now trying to find how to fix it for hours now
My phone has an internal battery and memory / non removable - cause all the threads about flashing and videos about flashing i watched was removing batteries (but i have an internal battery )
It is a rebranded china phone called Cherry Mobile Omega Infinity.
According to the SPECS sheet:
Mediatek MT6592 1.7GHz octa-core CPU.
Now all i need are the whats and how guides.
Thanks in advance
XDA Visitor said:
First of all i have no knowledge on how to fix my phone or flashing.
My question title are based on what i read from other threads.
My Problem
Connected Phone to USB to Charge
Removed Phone from USB
Lock Screen wont appear
Decided to Reboot the phone
After Rebooting, I got stuck at loading/bootloading screen
Decided to go to Factory menu by holding Vol Down and Power
Chose Reboot Option
After that, the phone rebooted nonstop like 5 times and turned off.
Now my phone won't charge, or power up
Now trying to find how to fix it for hours now
My phone has an internal battery and memory / non removable - cause all the threads about flashing and videos about flashing i watched was removing batteries (but i have an internal battery )
It is a rebranded china phone called Cherry Mobile Omega Infinity.
According to the SPECS sheet:
Mediatek MT6592 1.7GHz octa-core CPU.
Now all i need are the whats and how guides.
Thanks in advance
Click to expand...
Click to collapse
Hello there! Welcome to XDA!
First register an XDA account (so you can ask in the proper forum)
then, you may ask for help here: (see below)
Android Q&A, Help & Troubleshooting
You will have a much much better chance of getting an answer in the above thread.
TEKHD said:
Hello there! Welcome to XDA!
First register an XDA account (so you can ask in the proper forum)
then, you may ask for help here: (see below)
Android Q&A, Help & Troubleshooting
You will have a much much better chance of getting an answer in the above thread.
Click to expand...
Click to collapse
HI!
yes thanks for the reply. i got logged out it seems. i have another post like this one with my acct name on it. just delete the other one if necessary.:good:
i have a hdc s6 mtk 6582 and it wont come off of the no command screen. i tried key combinations and tried restarting but still cant come off no command screen.it started when I was trying to factory reset but ended selecting the wrong option because the instruction on the screen for the buttons was wrong. i got the stock rom.pls help!!!!!!!!!!!!!!!1
shansingh1100 said:
i have a hdc s6 mtk 6582 and it wont come off of the no command screen. i tried key combinations and tried restarting but still cant come off no command screen.it started when I was trying to factory reset but ended selecting the wrong option because the instruction on the screen for the buttons was wrong. i got the stock rom.pls help!!!!!!!!!!!!!!!1
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Sounds like the option pressed by mistake was along the lines of "format system". Hopefully when you say you "have the stock rom" you mean you have a copy of the firmware. Because the stock ROM on the device probably is not any more.
I don't know if this Samsung clone would have download mode. Can try holding in both volume buttons and connecting the device to a PC while it is powered off. That should give you something other than what you are currently getting. What to do from there, well, you may need to get the files from HDC.
I would try this thread, since I cannot find any S6's with that chipset number:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Q] HDC S5 G900F Clone MTK 6582 QuadCore
...particularly this post.
Any questions can go in this thread as well.
Hope this helps, and good luck!