Hi everybody!
I flashed (with RKAndroid Tool) this one: Oma_RK3026_Dragontouch_R93_KK_4.4.2_v1.0_gen2 loader
to my VERO AR 717 tab (sold in Greece) with the foillowing specs:
rockchip RK 3026
512 MB DD3
8 GB
7" TFT LCD (800x480) capacitive
Android 4,4
Actually, STEP 4 of the instructions did not happen.
So I ticked from parameter to recovery(anything apart from loader and back up) and pressed RUN
All went well.
However, device is not booting.
Strangely, Morobobo soft recognizes the tab as Nexus 7 and lists all the apps and etc..
RKBatch Tool v 1,7 also connects to the tab.
Any ideas please?!
Thank you!
Hi again!
Sorry for reposting.
On addition to the info provided above, the following:
Fastboot does not detect the devise
On the other hand the AndroidTool that came with the rom detets the device,runs the test ok, loads recovery however I can not get it to boot using any hard key combination(reset button + power +vol up or eset button + power, or reset button + power down or reset button + power+both vol)
I CAN ACCESS THE FILES THROUGH MOBOROBO
BUT
NO BOOT :crying:
Is it that I might have flashed the wrong bootloader..???
Thank you
Hi there,
I'm sorry but I can't find anything relevant to your question/device.
Please post that in the forum bellow for more answers from the experts :
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Related
I have recieved a new phone recently that decided to go into a boot loop after unplugging from charger this morning. Everything was working fine until this. I can not seem to find the recovery menu/reboot into recovery mode. If I hold the volume -, and power button I get a menu in chinese that appears to be for testing and "resetting eMMC". Is there anyone who may know how to enter recovery with this device? The manufacturer is unknown (appears as ALPS in android settings), model number H900. The device has mtk6592 CPU mali-450mp gpu, 2GB ram, 1080p display. Should I go ahead and RMA it? If anyone can translate Chinese I can post pictures of the menu I am able to boot into, however it does not appear to be the standard android recovery menu. Any help would be appreciated!
Since we do not have a forum for your device, please post in
General discussion > Questions and Answers
so that the right experts may be of help.
BRICKED 7inch Irola Tablet...PLEASE HELP
I am in DIRE need of some help with my tablet. I received this irola dx752 tablet bricked and cannot fix it for the life of me. I am able to hold power and volume up and get into recovery system version 4.2.01. I Have tried a factory reset and a wipe system cache and the tablet just reboots to the green robot with and exclamation mark. If I press volume up, it brings me back to the system recovery. Now i am not very versed in ADB but I tried to sideload just about every firmware I could find for an a13 allwinner a8 cortex 7inch tablet, since the irola website has taken down its firmware. Also, fastboot will not work on this tablet whatsoever (it just says waiting for device) when i enter any command. I have never seen this tablet boot into a rom of any kind and therefore cannot tell if USB Debugging was ever enabled. I also Have tried different drivers but the one that seem to hold is the Android ADB Interface. CAN ANYONE PLEASE GIVE ME SOME SUGGESTIONS OR SOME HELP? It would be greatly appreciated. Thank you.
Hi,
I can't find anything relevant on XDA for your device and issue, so you will need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
As the topic said,
I accidentally format the bootloader (its a 8KB partition that asked for format before you can use it that pop up during rooting process)
The moment i hit the format button, my phone goes for a quick vibrates and died. No power, no recovery/diagnosis mode, wont charge, pc goes error on driver while connected with the phone. Tried taking the battery out and hold the power button, leave it there for 2 days, tried any other stuff. It just wont flinch.
Is the phone hardbricked? Or is the battery faults? Is there a chance that the recovery can be made just to make my phone alive again? It was hard for me to find as this phone is kinda underground brand. Any help would be appreciated. Thanks!
Hi there,
I'm sorry but I can't find anything relevant to your question/device except this thread where you can ask: [Q] Phicomm FWS 710 Pro stuck before boot animation
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
i have a hdc s6 mtk 6582 and it wont come off of the no command screen. i tried key combinations and tried restarting but still cant come off no command screen.it started when I was trying to factory reset but ended selecting the wrong option because the instruction on the screen for the buttons was wrong. i got the stock rom.pls help!!!!!!!!!!!!!!!1
shansingh1100 said:
i have a hdc s6 mtk 6582 and it wont come off of the no command screen. i tried key combinations and tried restarting but still cant come off no command screen.it started when I was trying to factory reset but ended selecting the wrong option because the instruction on the screen for the buttons was wrong. i got the stock rom.pls help!!!!!!!!!!!!!!!1
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Sounds like the option pressed by mistake was along the lines of "format system". Hopefully when you say you "have the stock rom" you mean you have a copy of the firmware. Because the stock ROM on the device probably is not any more.
I don't know if this Samsung clone would have download mode. Can try holding in both volume buttons and connecting the device to a PC while it is powered off. That should give you something other than what you are currently getting. What to do from there, well, you may need to get the files from HDC.
I would try this thread, since I cannot find any S6's with that chipset number:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Q] HDC S5 G900F Clone MTK 6582 QuadCore
...particularly this post.
Any questions can go in this thread as well.
Hope this helps, and good luck!
I am helping out a friend regarding his tablet Wave 8 HD+ (33GT HD).*
The tablet doesn't have any physical volume button.*
The problem is that he tried to update to the latest firmware but got stuck in recovery with error status 7. There is no way to scroll down to choose option (factory reset, enter ADB, etc.) since there is no physical volume button.
I was able to download the firmware from bluewave and it contains a flashing tool called Rockchip Batch Tool and *Rock chip driver.*
Problem is: laptop doesn't recognize the tablet as the GT, it will show as Android Device > Android ADB Interface in Device Manager.
Anyone has any idea what to do? Thanks
johncodog said:
I am helping out a friend regarding his tablet Wave 8 HD+ (33GT HD).*
The tablet doesn't have any physical volume button.*
The problem is that he tried to update to the latest firmware but got stuck in recovery with error status 7. There is no way to scroll down to choose option (factory reset, enter ADB, etc.) since there is no physical volume button.
I was able to download the firmware from bluewave and it contains a flashing tool called Rockchip Batch Tool and *Rock chip driver.*
Problem is: laptop doesn't recognize the tablet as the GT, it will show as Android Device > Android ADB Interface in Device Manager.
Anyone has any idea what to do? Thanks
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie Friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal