Database Info

[AROMA][FLO]Recovery Switcher[2014-07-19]

Disclaimer:​
By flashing this rom you take full responsibility to whatever happens on your device. The developer will NOT be held responsible to whatever happens on your device. Of course, this tool has been tested but whatever happens on your device will not be held against the developer.
*NOTE*
If you Want Want To See A Recovery That not in Here Just Ask
Be Sure You Have A Nexus 7 2013 FLO (Wifi Only)
About:​One day while on xda I saw a recovery switcher made by another xda user so I said to myself "hay I want that"
so After Messing With Stuff I Was Done With my Own Recovery Switcher But Enough taking go ahead and flash and have fun IF you like my development please follow my project from desktop, by going on the first page of this thread and pressing from the top black corner the button telling you "FOLLOW PROJECT”.
THANK YOU
Recoverys In Here:​
[*]TWRP 2.7.1.0
[*]ClockworkMod Touch 6.0.4.9
[*]ClockworkMod Non Touch 6.0.4.7
[*]PhilZ Touch 6.48.4
[*]OUDHS 1.0.3.4
[*]MultiROM
Features:​
[*]Switch Pre Built Recovery Made For Your Device On The Fly
[*]No More Flashing recovery's In Fastboot
Changelog:​v1.0 - 1/25/14:
Initial Release
v2.0 - 2/6/14:
Added
Multirom
OUDHS
v3.0 - 3/13/14:
Updated TWRP
Updated ClockworkMod Tounch/Non Touch
Updated PhilZ Touch
Updated MultiROM Patch + Recovery
Added MultiROM Patch Uninstaler
v4.0 - 4/16/14:
Updated MultiROM
v5.0 - 4/24/14:
PhilZ Touch 6.26.6
v6.0 - 7/19/14:
Updated TWRP
Updated ClockworkMod Tounch
Updated PhilZ Touch
Updated MultiROM Patch + Recovery
Downloads:​​Recovery_Switcher_Nexus7(2013)v6
MD5 1412dd974cd295933d54d609ec0e1b4e
Recovery_Switcher_Nexus7(2013)v5
MD5 6e2ff38967e41c5f047a16054c6de918
Recovery_Switcher_Nexus7(2013)v4
MD5 69db80b530141d59427cdb964b561ebe
Recovery_Switcher_Nexus7(2013)v3
MD5 d5445eb7db0ab2986f1bb1f1c85315a7
Recovery_Switcher_Nexus7(2013)v2
MD5 4a64d5bc4e5ca1b9e0fc82eaceced6d0
Recovery_Switcher_Nexus7(2013)v1
MD5 90f3dae69bad84a3d663e0015afb1883
Don't forget to hit the thanks button, I have worked very hard on this​
Instructions:​
Download the zip
Boot into recovery
Install It like you would with a Mod Or Rom
Then Set The Check Box At the end With Reboot In To System
Then Boot Back In to recovery and See your new recovery
Thanks To/Credits:
@amarullz - For Aroma Installer
@CNexus - For The Idea
@Nburnes - For CWM Recovery
@Phil3759 - For Philz Recovery
@Dees_Troy - For Twrp Recovery
@mattlgroff - OUDHS
@Tasssadar - MultiROM @Venomtester - For The Op Pictures
Big Thank You To @wapvirus For Testing And For The Splash Screen
@glencoco​
XDA:DevDB Information
[AROMA][FLO]Recovery Switcher[2014-01-28], a Tool/Utility for the Nexus 7 (2013)
Contributors
Flashalot
Version Information
Status: Stable
Current Stable Version: v3
Stable Release Date: 2014-03-14
Created 2014-01-29
Last Updated 2014-03-14

Wonderful application just a couple of things what about backup I have multirom twrp after using your app I can only put normal twrp I have re-apply the multirom patches.
Unless it's possible to add the multirom version ?
Sent From My Nexus 7 flo Using TapaTalk Pro

wapvirus said:
Wonderful application just a couple of things what about backup I have multirom twrp after using your app I can only put normal twrp I have re-apply the multirom patches.
Unless it's possible to add the multirom version ?
Sent From My Nexus 7 flo Using TapaTalk Pro
Click to expand...
Click to collapse
I could add the recovery in and the patch I'll figure something out
Sent from my PC36100 using Tapatalk 2

wapvirus said:
Wonderful application just a couple of things what about backup I have multirom twrp after using your app I can only put normal twrp I have re-apply the multirom patches.
Unless it's possible to add the multirom version ?
Sent From My Nexus 7 flo Using TapaTalk Pro
Click to expand...
Click to collapse
+1 Multirom. Sounds tricky :laugh:
Very nice job!

Awesome flashalot
Sent from my Nexus 7 using XDA Premium HD app

Please bring support for Multi-rom. Many people use multi-rom.
Hope you will bring new version soon.

busventinc said:
Awesome flashalot
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
no problem I remember you from the Evo 3d nice to see familiar faces
tashik19 said:
Please bring support for Multi-rom. Many people use multi-rom.
Hope you will bring new version soon.
Click to expand...
Click to collapse
well the bad thing is my n7 is cracked in one spot and will not work atm im sending it to asus for a repair
i could release it but if someone wants to test pm me

Flashalot said:
no problem I remember you from the Evo 3d nice to see familiar faces
well the bad thing is my n7 is cracked in one spot and will not work atm im sending it to asus for a repair
i could release it but if someone wants to test pm me
Click to expand...
Click to collapse
Oh we are waiting.
However, I have found this recovery- http://forum.xda-developers.com/showthread.php?t=2386112
Please include this recovery as well! Then it will be a complete package.

Flashalot said:
no problem I remember you from the Evo 3d nice to see familiar faces
Click to expand...
Click to collapse
I am glad you got your self a N7 glad your here I have been fortunate that when I joined in 2008 been able to use a lot of awesome and creative work on my devices starting with the evo then the 3vo and now my N7 a lot of Great devs from Myn to you and they are always greatly appreciated by me and under appreciated sometimes by the community we had a lot of fun back then and I am glad you keep doing what you do...
Sent from my Nexus 7 using XDA Premium HD app

Flashalot said:
well the bad thing is my n7 is cracked in one spot and will not work atm im sending it to asus for a repair
i could release it but if someone wants to test pm me
Click to expand...
Click to collapse
Sorry to hear about your nexus hope it won't cost to much to repair I would like to test your new work sending PM now

Update as been released check op for change log
Also thank @wapvirus for testing and the new splash screen

This is a wonderful tool to have thanks for your hard work and thanks for sharing it with us
Sent from my Nexus 7 using Tapatalk

Oh man, I thought I would be able to flash 6 recoveries at a time. And then use any of them when I want. Is there any way to do it?? @Flashalot

tashik19 said:
Oh man, I thought I would be able to flash 6 recoveries at a time. And then use any of them when I want. Is there any way to do it?? @Flashalot
Click to expand...
Click to collapse
No its just a aroma recovery switcher
Umm i don't see a reason to multi boot a recovery a ROM or a different os is one thing but a recovery... To my knowledge no there is no way to muilt boot a recovery
Sent from my PC36100 using Tapatalk 2

Flashalot said:
No its just a aroma recovery switcher
Umm i don't see a reason to multi boot a recovery a ROM or a different os is one thing but a recovery... To my knowledge no there is no way to muilt boot a recovery
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
Oh. Thanks for your info.

Massive Update has been released check op for change log ?

This is a really slick tool. Nice to be able to quickly try out the various recoveries so easily.
Just for fun I did a nandroid backup with a fresh install of twrp (I usually use the multirom version) and had a backup that took 16 minutes and 2651mb in size. I then installed philz touch and took a backup that took 20 minutes and was 3861mb in size. Guess I'll stick with twrp. (Although I might try the backup with OUDHS, that looked pretty nice)

Abso-lute-ly GREAT job, @Flashalot! Thanks for your hard work on this and sharing it. Thanks for giving permission to our awsome Galaxy Tab 2 developer Android-Andi to adapt this for the Tab2 models. I've tested the Recovery Switcher's beta/RC version and confirm he did it correct way, given credits and mentioned you multiple times there. I've clicked thanks button beyond all your posts in this thread, regrettably not so many people seem to do it.

Minor Update Released Check op for change log ?
Sent from my Nexus 7 using Tapatalk

Cool, @Flashalot
Please consider to replace PhilZ with the newest version next time, as Phil3759 has made important updates last week and solved some bugs that were there since v6.09.x (same bug also in CWM since v6.0.4.5 until today)
tetakpatalked from Nexus 7

[FAQ][ROM] Cyanogenmod 11 for Moto G

Support thread for Cyanogenmod 11 for Moto G
Debug Thread
This thread is meant to be a Q&A, Help & Troubleshooting thread for all the lost souls that encountered trouble that is unrelated to the development of the rom.
Do you have trouble finding which variant is supported?
Are you afraid it will brick your phone?
Are you unsure about the procedure for flashing the rom?
This is the thread to ask your questions and I will try to answer a few of them already in the OP.
General questions on how to unlock the bootloader and flash a custom recovery can be found in @matmutant's thread. This thread is only for Cyanogenmod specific questions.
[SIZE=+1]Q1: Which phone variant is officially supported?[/SIZE]XT1031, XT1032, XT1033 and XT1034) and Google Play Edition (XT1032).​
[SIZE=+1]Q2: How do you flash the ROM if you come from stock/other custom rom?[/SIZE]Follow the steps:
unlock the bootloader
flash custom recovery
wipe /cache
format /system
format /data
install latest zip
install Google Apps
[SIZE=+1]Q3: What to do if I want to update CM?[/SIZE]All you have to do is flash the official CM on your device. You will get notifications about updates on your phone or you check manually in Settings -> About Phone -> CyanogenMod Updates. The OTA update works completely automatic with a supported recovery and you do not need to do anything else (no /cache wiping, /system or /data formating, no Google Apps installation).​
[SIZE=+1]Q4: Where do I get the latest download?[/SIZE]You can find the downloads on the cyanogenmod information page. However, there are 4 different types (Nightly, milestone, release candidate, stable). You can find a description of the types on that page as well. Currently there are only nightlies and milestone builds available.​
[SIZE=+1]Q5: Which version do I need to download?[/SIZE]Download the version with the latest timestamp (e.g. cm-11-20140219-NIGHTLY-falcon.zip ). It is a unified build and works with all supported devices alike.​
[SIZE=+1]Q6: Where can I find a change log?[/SIZE]
You can find a change log on cmxlog.com and in the cyanogen updater, just click on the version number of the OTA.​
[SIZE=+1]Q7: Which custom recovery should I use?[/SIZE]Currently, there are 4 custom recoveries: CWM Advanced Edition, CWM, TWRP, CWMSwipe. You can get the letter three from the OP of the development thread or by using search.​
[SIZE=+1]Q8: I am getting an error when doing OTA Update on CWM Advanced Edition.[/SIZE]The storage is set wrong in the recovery. Boot into recovery go to "Advanced" and click on "Storage set to /data/media/0". Reboot your phone and do the OTA Update.​
[SIZE=+1]Q9: What is not working?[/SIZE]Always remember that this is still an early build. It is far from perfect, however, mostly useable. You can find a list of bugs in the Debug Thread.​
[SIZE=+1]Q10: How to report a bug?[/SIZE]Make sure that the bug persists after a clean install and is not just the result of a dirty flash. Format /cache, /system & /data, reinstall the rom and check for the bug. If it still persists report it in the Debug Thread​
[SIZE=+1]Q11: What is the AnTuTu Score for this ROM?[/SIZE]It is around 17,000.​
[SIZE=+1]Q12: How can i enable On/Off screen with Flip Shell on MotoG under CM11?[/SIZE]
The Flip Shell should work out of the box since CM11-20140317-NIGHTLY.​
[SIZE=+1]Q13: How to enable Immersive mode ?[/SIZE]
Got to settings > interface > Expanded Desktop style.
Choose between Disabled/Status bar visible/Status bar hidden.
Long press power button and choose 'Expanded Desktop'
If there is something important coming in the discussions below, I will try to add this to the OP.
thanks to @dhacker29, @a1Pha, and all others that push the development of the Moto G.

Hi thanks. There is also philz recovery.

denzel09 said:
Hi thanks. There is also philz recovery.
Click to expand...
Click to collapse
Is it also known to work with the CM11 build from dhacker? I only tried CWM so far.

Uhhmm i don't know the reasons why it should not work with cm 11, but if so it would really strange and the dev should know this.

It is a nice idea to build a CM11 specific FAQ, though, it is pointless to duplicate global Q&A already hangin' in the already existing FAQs and Guides.
eg these ones :
[Q]: How do I unlock my bootloader?
[Q]: How do I install the recovery on my Moto G?
Click to expand...
Click to collapse
you should link to global RC-FAQ for general questions, and only keep CM specific questions here.
Thank you,
[email protected]
PS : you also should use the following template for easy reading by users :
[SIZE=+1]QX: [?][/SIZE][...]​
[SIZE=+1]QY: [?][/SIZE][...]​
[SIZE=+1]QZ: [?][/SIZE][...]​
PHP:
[SIZE=+1]QX: [COLOR=RED][B][?][/B][/COLOR][/SIZE][INDENT][...][/INDENT]
[SIZE=+1]QY: [COLOR=RED][B][?][/B][/COLOR][/SIZE][INDENT][...][/INDENT]
[SIZE=+1]QZ: [COLOR=RED][B][?][/B][/COLOR][/SIZE][INDENT][...][/INDENT]

matmutant said:
It is a nice idea to build a CM11 specific FAQ, though, it is pointless to duplicate global Q&A already hangin' in the already existing FAQs and Guides.
eg these ones :
you should link to global RC-FAQ for general questions, and only keep CM specific questions here.
Thank you,
[email protected]
PS : you also should use the following template for easy reading by users :
[SIZE=+1]QX: [?][/SIZE][...]​
[SIZE=+1]QY: [?][/SIZE][...]​
[SIZE=+1]QZ: [?][/SIZE][...]​
HTML:
[SIZE=+1]QX: [COLOR=RED][B][?][/B][/COLOR][/SIZE][INDENT][...][/INDENT]
[SIZE=+1]QY: [COLOR=RED][B][?][/B][/COLOR][/SIZE][INDENT][...][/INDENT]
[SIZE=+1]QZ: [COLOR=RED][B][?][/B][/COLOR][/SIZE][INDENT][...][/INDENT]
Click to expand...
Click to collapse
Yeah makes sense I will do that! Unfortunately, I am only allowed to post/edit every 5 minutes. I will change that asap

denzel09 said:
Uhhmm i don't know the reasons why it should not work with cm 11, but if so it would really strange and the dev should know this.
Click to expand...
Click to collapse
it works just checked!

I successfully instaled cm11 and its perfectly working. But I have a worry:
The CRT animation (from turn off screen) i'ts laggy. Its like at 2 fps or somethings, it isn't smooth at all. This lag is present also when I touch the multitask button, it takes like a second to show the apps. On some menus, the lag is present too.
The weirdest part is that a few hours ago, the lag dessappears, but now is back again.
Anyway with the same problem? or any solution? It will be appreciated

Gronnd said:
I successfully instaled cm11 and its perfectly working. But I have a worry:
The CRT animation (from turn off screen) i'ts laggy. Its like at 2 fps or somethings, it isn't smooth at all. This lag is present also when I touch the multitask button, it takes like a second to show the apps. On some menus, the lag is present too.
The weirdest part is that a few hours ago, the lag dessappears, but now is back again.
Anyway with the same problem? or any solution? It will be appreciated
Click to expand...
Click to collapse
Hey, are you on the latest update (2014-02-19)? Can you check the performance tab in settings and tell me what your min and max frequency is?

Yes, i'm on the latest build.
My frequences are at stock, 300 min 1190 max. Using interactive governor.
I'm using pink kernel last build btw, but i have this problems before with kernem from cm11
Thanks for helping me
Enviado desde mi Moto G mediante Tapatalk

Gronnd said:
Yes, i'm on the latest build.
My frequences are at stock, 300 min 1190 max. Using interactive governor.
I'm using pink kernel last build btw, but i have this problems before with kernem from cm11
Thanks for helping me
Enviado desde mi Moto G mediante Tapatalk
Click to expand...
Click to collapse
Those settings are all correct. Did you dirty flash the rom or did you wipe /cache and format /system & /data before you installed cm11?

I do all wipes and format.
I really dont know what i'm doing wrong.
Enviado desde mi Moto G mediante Tapatalk

Gronnd said:
I do all wipes and format.
I really dont know what i'm doing wrong.
Enviado desde mi Moto G mediante Tapatalk
Click to expand...
Click to collapse
can you go to settings -> apps -> running and see if you RAM is full? If that is not the case than I would recommend reinstalling cm and see if it was just a faulty flash.

pinguijxy said:
can you go to settings -> apps -> running and see if you RAM is full? If that is not the case than I would recommend reinstalling cm and see if it was just a faulty flash.
Click to expand...
Click to collapse
I have 461 mb free, so its no RAM problem.
I think I will try the reinstall.
Is there any other wipe/formar/erase comand that you think I should use, if case this problem comes from a corrupted file?
Enviado desde mi Moto G mediante Tapatalk

Gronnd said:
I have 461 mb free, so its no RAM problem.
I think I will try the reinstall.
Is there any other wipe/formar/erase comand that you think I should use, if case this problem comes from a corrupted file?
Enviado desde mi Moto G mediante Tapatalk
Click to expand...
Click to collapse
If it is still present after a fresh install ( formate /cache /system /data) than it is probably a bug and you should report it to @dhacker29 in the development thread of CM11

pinguijxy said:
If it is still present after a fresh install ( formate /cache /system /data) than it is probably a bug and you should report it to @dhacker29 in the development thread of CM11
Click to expand...
Click to collapse
Ok, I'll try a fresh install then
Enviado desde mi Moto G mediante Tapatalk

What's the score in AnTuTu using this ROM?

giugiura said:
What's the score in AnTuTu using this ROM?
Click to expand...
Click to collapse
I get 17200 more or less.
Sorry if is a noob question but, is xposed framework compatible with this ROM?

Gronnd said:
I get 17200 more or less.
Sorry if is a noob question but, is xposed framework compatible with this ROM?
Click to expand...
Click to collapse
Thanks for the info. I was wondering what the score is since I was unsure what to flash on my device, this or Nexus G+ ( Which scores over 18k )
And regarding your question, as long as you use Dalvik and not ART, it should work just fine

4 cores
Does someone know if the processor is working with all 4 cores now? Thanks!!

[Q&A] [ROM][12-Mar][5.0.2][STOCK 201503012-NIGHTLY-bacon]CRASH ROM v2.5

Q&A for [ROM][12-Mar][5.0.2][STOCK 201503012-NIGHTLY-bacon]CRASH ROM v2.5
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][12-Mar][5.0.2][STOCK 201503012-NIGHTLY-bacon]CRASH ROM v2.5. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Crash thanks for the work. It's on the OTA. Firmware is excellent.:good:

Ukraine 12 said:
Crash thanks for the work. It's on the OTA. Firmware is excellent.:good:
Click to expand...
Click to collapse
Thanks to you my friend for running my rom yes OTA is good tool to keep my rom updated hehe
Hugs
Enviado desde mi OnePlus One

Wakelock
Hello Crash, firts of all thanks for the great rom, you did a great job.
But i have a little problem, my rom is upgraded from cm11s to your rom, and i have a constant wakelock from Google Play services, the "SystemUpdateService " service causes 7 hours wakelock for me, i have to shot it down by hand with a third party program.
My question is, this is caused by the upgrade from cm11s or because the nightly build ?
Before the install i flashd one of the cm12 nightlys.
Sorry for my bad english

Frosty89 said:
Hello Crash, firts of all thanks for the great rom, you did a great job.
But i have a little problem, my rom is upgraded from cm11s to your rom, and i have a constant wakelock from Google Play services, the "SystemUpdateService " service causes 7 hours wakelock for me, i have to shot it down by hand with a third party program.
My question is, this is caused by the upgrade from cm11s or because the nightly build ?
Before the install i flashd one of the cm12 nightlys.
Sorry for my bad english
Click to expand...
Click to collapse
Is a now bug from Google my friend
Enviado desde mi OnePlus One

GApps
Hi Crash,
I tried to reinstall your rom after I installed Blisspop 502 and GApps (pa_gapps-stock-5.0.1-20150307-signed.zip).
After reboot, all gapps crash (e.g.: youtube stopped working, play services stop working, etc.)
How can I avoid a full wipe?
Your help is very appreciated.
Ottix

ottixx said:
Hi Crash,
I tried to reinstall your rom after I installed Blisspop 502 and GApps (pa_gapps-stock-5.0.1-20150307-signed.zip).
After reboot, all gapps crash (e.g.: youtube stopped working, play services stop working, etc.)
How can I avoid a full wipe?
Your help is very appreciated.
Ottix
Click to expand...
Click to collapse
If you are coming from another rom is better to fullwipe or gapps will conflict since I'm using gapps from another source hehe
Enviado desde mi OnePlus One

How to Install in MultiROM?
I cm11s with TWRP 2.8.5 and kernel AK.072.GOLD.OPO.CM11S
1) Boot into recovery, MultiROM, add rom, zip, I select rom.zip and swipe
or
2) Boot into recovery, MultiROM, add rom, zip, I select cm12 nightly.zip and swipe
then back on the list of rom I select cm12, flash zip, I select crashrom.zip and swipe.
Thanks for the 'help.

#2
Enviado desde mi OnePlus One
---------- Post added at 07:53 AM ---------- Previous post was at 07:52 AM ----------
aletronky2006 said:
How to Install in MultiROM?
I cm11s with TWRP 2.8.5 and kernel AK.072.GOLD.OPO.CM11S
1) Boot into recovery, MultiROM, add rom, zip, I select rom.zip and swipe
or
2) Boot into recovery, MultiROM, add rom, zip, I select cm12 nightly.zip and swipe
then back on the list of rom I select cm12, flash zip, I select crashrom.zip and swipe.
Thanks for the 'help.
Click to expand...
Click to collapse
#2
Enviado desde mi OnePlus One

Hey Crash,
Love the ROM, one of the better ones I saw and it fits my needs perfectly
One quick question though, I saw on the cm nightly change log that support for recording calls was added for the opo however it's disabled.
I've read around that it needs to be enabled on build.
Are you able to enable it?
Thanks!!

I still prefer this ROM than Oxygen.
Thanks for build this sucker ! Love it so much

crash with DS audio
Crash rom was reli nice, especially the battery life. However, I have a NAS and home and tried to access it with DS audio (an app designed by synology). However it was forced to close it every time. Is there any way to solve this?

alvintong9238 said:
Crash rom was reli nice, especially the battery life. However, I have a NAS and home and tried to access it with DS audio (an app designed by synology). However it was forced to close it every time. Is there any way to solve this?
Click to expand...
Click to collapse
Did you try if something related with stock kernel?
Enviado desde mi OnePlus One

[ROM][UNOFFICIAL][UBERTC] [7.1.2] Lineage 14.1 05/30/2017

Please use and share logcats
We can make this feature complete device-tree and then there's countless ROMs we could all enjoy.
I will need your help to do that. Any issues please log and please post below.
Build 20170530
Build 20170520
Build 20170502
SoundFX Fix build 05/02/2017
Build 20170426
Build 20170422
Build 20170413
If you want your headset buttons to make your music louder or quieter and skip track on longpress that is for you
Headset Patch
Guide for Installation
1. Download gapps (I used nano but any arm64 7.1 is fine)
2. Boot into TWRP (Epic TWRP recommended)
3. Format system
4. Flash ROM
6. Flash gapps
7. Flash Magisk to remove dm-verity if you don't want your system to excrypt data!
8. Reboot to system
Confirmed working:
Proximity sensor
Fingerprint
NFC
Wi-Fi
Bluetooth
LTE
Camera (front and rear)
Flash
Microphone
Speaker
Thanks to:
Special thx to @LuK1337 and Lineage team for their awesome help.
xiaobai112220 without his capricorn work none of this would be possible.
Epic Team for help and support!
@StoneTrapper
I've been working on fingerprint support but it has been very elusive thus far, anyone with experience is welcome to help.
Join the Mi Note 2 Telegram group to get in touch.

I can confirm this is legit, very nice rom so far. Testing it currently .. nothing special except fingerprint not working so far.

NFC is on the working and not working list at the same time? ?

Nfc and USB otg now confirmed working.

Thank you very much for your very hard work pappschlumpf , very happy to use aosp rom on mix !!
:good: :good: :good:

i know it might be a bit early, but is there any way to root this beauty?

syther said:
i know it might be a bit early, but is there any way to root this beauty?
Click to expand...
Click to collapse
In the OP Point 7 of installation guide. That installs MagiskSU. Just install magisk manager to control root.

I'm coming from epic global ROM, do i still need to do the formatting?
Edit: by format system, do you mean factory reset or formatting the entire SD card where all files will be erased?
Sent from my MIX using Tapatalk

pappschlumpf said:
In the OP Point 7 of installation guide. That installs MagiskSU. Just install magisk manager to control root.
Click to expand...
Click to collapse
aah thx for the tip. first time i use this magisk , needed to download the manager to gain control

pappschlumpf said:
...
7. Flash Magisk to remove dm-verity if you don't want your system to excrypt data!
...
Click to expand...
Click to collapse
Where is the Magisk zip please, I'm not sure about this...

İt's working like a charm
Thanks for all the effort
Sending via mi mix with your build

Is it come with Apps Drawer

Lykeul said:
Where is the Magisk zip please, I'm not sure about this...
Click to expand...
Click to collapse
Original Magisk thread, XDA.
Gesendet von meinem Xiaomi Mi MIX

This is wonderful!
I ordered my Mix and it should arrive next week..and I was only DREAMING of CM14.1 build, as I'm not too fond of the "no drawer" Xiaomi does with the ROMs. Also Pixel Launcher is so nice to use!
@pappschlumpf you really made a happy man out of me!! I would ask one bit of info: did you use kernel sources from the Note 2? I was trying to understand how to perform a build by myself but lack of sources had stopped me. could you explain how you solved this?
Thank you!!

Fingerprint fixed! New zip in the OP

Great job, made in Germany ?

I'm perplexed by how well this rom works, great job dev!!

wching02 said:
Is it come with Apps Drawer
Click to expand...
Click to collapse
Just like lineageos trebuchet is the launcher you can flash pixel or Google launcher either or download ext ext
---------- Post added at 01:19 PM ---------- Previous post was at 01:18 PM ----------
pappschlumpf said:
Fingerprint fixed! New zip in the OP
Click to expand...
Click to collapse
Great job sir you are a great guy

Wait did they release the mi mix kernel sources ? Looks like i'm behind

This is so exciting. Can't wait to try. My device was unlocked when I got it, but when I flashed the global software, I didn't realize that wipe and lock was ticked. So now my bootloader is locked. Since it is tied to the mi account and not the device, I have to wait for them to okay it. And they seam to be in no hurry. Silliest way ever for unlocking. Anyone know a way to speed up the process?

[BETA/TESTING] Xiaomi Essential Tool [NO ROOT]

Hi, i want to introduce you my tool, Xiaomi essential tool
DISCLAIMER
I'm not responsible for bricked phones or dead sdcard! You do so at your own risk!
Click to expand...
Click to collapse
​XET is coded in python, and should work with all xiaomi devices.
Features:
Backing up and restoring build.prop file
Changing DPI -Recovery
Installing Mi Mix 2 camera apk (Auto backup old file to /system/priv-app/MiuiCamera/MiuiCamera.bak) -Recovery
Installing custom grid size up to 10x10 (Auto backup old file to /system/media/themes/default/com.miui.home.old) -Recovery
Camera 2 API activation -Recovery
Removing system Apps -System (no root needed)
Downloading and installing twrp for supported phones (this with official TWRP) -System (no root needed)
Rebooting phone to fastboot, recovery, sideload, system -System (no root needed)
Checking bootloader status (locked/unlocked) - Fastboot
Sideloading zips (drag and drop) -Recovery
No root needed, only recovery or system in some cases (see ^)
At this stage, i'm aiming for people that want and CAN help me with testing
I suggest starting script within cmd (open cmd > drag and drop > enter) so you can easily send me screnshoot or details of error.
Also, code is open so feel free to fork it.
Download & Install (click)
And last think, if u want to appreciate my job, you could consider buying me beer or help me to keep my server up on paypal.me/Mezutelni​
XDA:DevDB Information
XET, Tool/Utility for the Xiaomi Mi 5s
Contributors
mezutelni
Source Code: https://github.com/mezutelni/twrp-installer-xiaomi
Version Information
Status: Beta
Current Beta Version: 0.8
Created 2018-01-27
Last Updated 2018-01-27

mezutelni said:
Installing Mi Mix 2 camera apk
Click to expand...
Click to collapse
But why? How can be better than the stock MIUI camera for our device? Any link or description?
Btw, nice code.

iamnotstanley said:
But why? How can be better than the stock MIUI camera for our device? Any link or description?
Btw, nice code.
Click to expand...
Click to collapse
Actually it's just new interface, prettier in my opinion, more like in iPhones
Wysłane z mojego MI 5s przy użyciu Tapatalka

mezutelni said:
Actually it's just new interface, prettier in my opinion, more like in iPhones
Wysłane z mojego MI 5s przy użyciu Tapatalka
Click to expand...
Click to collapse
Can you share a few screenshots? I searched for it, and I haven't seen any difference.

iamnotstanley said:
Can you share a few screenshots? I searched for it, and I haven't seen any difference.
Click to expand...
Click to collapse
I have only one that I can share for now View attachment 4402216
Sent from my Mi 5s using Tapatalk

Nice, thanks ?

so by activating the cam2api i can install google camera without root?

aryope said:
so by activating the cam2api i can install google camera without root?
Click to expand...
Click to collapse
Yes, sorry for long replay, I have my school exams soon, so I'm not coding right now, so I won't guarantee support till ~21.05
Sent from my MI 5s using Tapatalk

Any plan in doing a linux version?

velix2 said:
Any plan in doing a linux version?
Click to expand...
Click to collapse
Right question is:
Do you want me to still maintain it?
I could rewrite whole script, update and fix it as much as i can, but i haven't seen much feedback, so, the question is, do you want me to keep it alive?

mezutelni said:
Right question is:
Do you want me to still maintain it?
I could rewrite whole script, update and fix it as much as i can, but i haven't seen much feedback, so, the question is, do you want me to keep it alive?
Click to expand...
Click to collapse
The XDA community is often "ungrateful" ...
They use everything but give you the most of the time no feedback. Only if something doesn't work and often not even then.

jigs4wkiller said:
The XDA community is often "ungrateful" ...
They use everything but give you the most of the time no feedback. Only if something doesn't work and often not even then.
Click to expand...
Click to collapse
Ok, so i will update it, and try to maintain it, atm i have rewritten twrpinstallator, and did some other small stuff, but i still need to host my files, so if you want to help me, consider donating me on my paypal (link in 1st post).
Also, i want you, to tell me what new features you would like to see.
When my server will be up, i'll add gcam install and auto root option, also in near future, i'll "beautify" app uninstaller, afther this, i will record some youtube movies, with small how to install etc.