Please use and share logcats
We can make this feature complete device-tree and then there's countless ROMs we could all enjoy.
I will need your help to do that. Any issues please log and please post below.
Build 20170530
Build 20170520
Build 20170502
SoundFX Fix build 05/02/2017
Build 20170426
Build 20170422
Build 20170413
If you want your headset buttons to make your music louder or quieter and skip track on longpress that is for you
Headset Patch
Guide for Installation
1. Download gapps (I used nano but any arm64 7.1 is fine)
2. Boot into TWRP (Epic TWRP recommended)
3. Format system
4. Flash ROM
6. Flash gapps
7. Flash Magisk to remove dm-verity if you don't want your system to excrypt data!
8. Reboot to system
Confirmed working:
Proximity sensor
Fingerprint
NFC
Wi-Fi
Bluetooth
LTE
Camera (front and rear)
Flash
Microphone
Speaker
Thanks to:
Special thx to @LuK1337 and Lineage team for their awesome help.
xiaobai112220 without his capricorn work none of this would be possible.
Epic Team for help and support!
@StoneTrapper
I've been working on fingerprint support but it has been very elusive thus far, anyone with experience is welcome to help.
Join the Mi Note 2 Telegram group to get in touch.
I can confirm this is legit, very nice rom so far. Testing it currently .. nothing special except fingerprint not working so far.
NFC is on the working and not working list at the same time? ?
Nfc and USB otg now confirmed working.
Thank you very much for your very hard work pappschlumpf , very happy to use aosp rom on mix !!
:good: :good: :good:
i know it might be a bit early, but is there any way to root this beauty?
syther said:
i know it might be a bit early, but is there any way to root this beauty?
Click to expand...
Click to collapse
In the OP Point 7 of installation guide. That installs MagiskSU. Just install magisk manager to control root.
I'm coming from epic global ROM, do i still need to do the formatting?
Edit: by format system, do you mean factory reset or formatting the entire SD card where all files will be erased?
Sent from my MIX using Tapatalk
pappschlumpf said:
In the OP Point 7 of installation guide. That installs MagiskSU. Just install magisk manager to control root.
Click to expand...
Click to collapse
aah thx for the tip. first time i use this magisk , needed to download the manager to gain control
pappschlumpf said:
...
7. Flash Magisk to remove dm-verity if you don't want your system to excrypt data!
...
Click to expand...
Click to collapse
Where is the Magisk zip please, I'm not sure about this...
İt's working like a charm
Thanks for all the effort
Sending via mi mix with your build
Is it come with Apps Drawer
Lykeul said:
Where is the Magisk zip please, I'm not sure about this...
Click to expand...
Click to collapse
Original Magisk thread, XDA.
Gesendet von meinem Xiaomi Mi MIX
This is wonderful!
I ordered my Mix and it should arrive next week..and I was only DREAMING of CM14.1 build, as I'm not too fond of the "no drawer" Xiaomi does with the ROMs. Also Pixel Launcher is so nice to use!
@pappschlumpf you really made a happy man out of me!! I would ask one bit of info: did you use kernel sources from the Note 2? I was trying to understand how to perform a build by myself but lack of sources had stopped me. could you explain how you solved this?
Thank you!!
Fingerprint fixed! New zip in the OP
Great job, made in Germany ?
I'm perplexed by how well this rom works, great job dev!!
wching02 said:
Is it come with Apps Drawer
Click to expand...
Click to collapse
Just like lineageos trebuchet is the launcher you can flash pixel or Google launcher either or download ext ext
---------- Post added at 01:19 PM ---------- Previous post was at 01:18 PM ----------
pappschlumpf said:
Fingerprint fixed! New zip in the OP
Click to expand...
Click to collapse
Great job sir you are a great guy
Wait did they release the mi mix kernel sources ? Looks like i'm behind
This is so exciting. Can't wait to try. My device was unlocked when I got it, but when I flashed the global software, I didn't realize that wipe and lock was ticked. So now my bootloader is locked. Since it is tied to the mi account and not the device, I have to wait for them to okay it. And they seam to be in no hurry. Silliest way ever for unlocking. Anyone know a way to speed up the process?
Related
Code:
* Your warranty is now void(almost)---------- Flashing this rom at your own risk
* If you aren't familar with flashing custom roms --------------- STOP HERE!!
* The roms comes as it is----no workarounds --------- no extended development
* If you wish to change or develop this rom -------------- send a P.M. to me
* I will not help you if you have issues and you didnt follow the guide
* Introduction *
I made this ROM, in order to have the best Pixel Experience without any additional/useless features. It is based on the latest Lineage OS and it was built by me. It is working perfectly on my 3T and it should work with the 3 too (unified build)
*Features*
Based on the latest Lineage OS (built by me)
February Security patch
All Google Apps (replaced the stock ones)
Pixel Launcher with round icon support
Pixel Boot Animation
Pixel Sounds
Pixel Live Wallpapers
Pixel's blue accent
Google Assistant
Root is included (you have to enable it from the dev options)
Round Icon for Settings
OnePlus' Recorder app
*Bugs*
Camera is buggy (expected)
*Installation Guide*
PLEASE FOLLOW IT
1. Download the ROM
1b. Download the add-on package (required)
1c. Download the GApps OpenGapps creates many problems)
2. Boot to TWRP
3. Wipe system, data, cache
4. Flash the ROM
5. Boot to the system and finish the setup wizard
6. Boot to TWRP
7. Flash the GApps
8. Flash the add-on
9. Boot to system
9b. In order to have your Phone App fully working, you must set the Google DIaler / Phone as default on the Settings (See here)
10. VOILA
*Download*
Take a look at the 2nd post
*Donations*
Donations are always welcome. But I think it is more than enough just to press the "Thanks" button
XDA:DevDB Information
Pixel Experience, ROM for the OnePlus 3
Contributors
t-shock
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked bootloader and TWRP installed
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2017-02-28
Created 2017-02-27
Last Updated 2017-02-28
Download Section
*Download section*
Links for:
ROM: Here
Add-ON: Here (you MUST flash this only on my LAOS and not on the official one)
Gapps: Here
*Changelog*
Version 1.1:
1. Another layout of the rom. Easier to fix any issue and easier to update.
F.A.Q
Frequently Asked Questions (F.A.Q)
You may have some questions about this whole project and this is completely normal. So let’s begin
Q: Google Play Services force closes a lot
A: No reason to panic. Just follow my guide and everything will work just fine.
1. Connect with your WiFi
2. Go to Settings → Apps and find the Google Play Services.
3. Wipe Data and Cache
4. Go to Permission of the app, and enable everything
5. Add your Google Account
6. Voila
Q: The SimToolKit is missing. I need it
A: Flash this zip and it will be restored. I removed it because it wasnt round (uploading)
Q: Can I flash any other Gapps package?
A: NO. The other packages replaces apps that are vital for the phone and it may lead to a bad experience overall
Q: Why did you made this rom?
A: I wanted to have a great Pixel Experience (thus its name)
Q: Any screenshot?
A: Take a look at the Screenshot category
*Thanks to*
Lineage OS Team for managing to create this rom for our 3/3T
@t-shock. Hi. Can I expect this to have the same level of pixel smoothness? I really love smooth Roms and I would really like to try this out. It's just that in my experience, Roms that are based on lineage is tend to be not so smooth. I promise am not trolling. Thanks
kscjx said:
@t-shock. Hi. Can I expect this to have the same level of pixel smoothness? I really love smooth Roms and I would really like to try this out. It's just that in my experience, Roms that are based on lineage is tend to be not so smooth. I promise am not trolling. Thanks
Click to expand...
Click to collapse
Well, I will have to disappoint you on that. The rom is smooth and snappy BUT it is by no means as smooth and fast as the Google Pixel. Ofcourse, you can try it and report because your experience may be different
t-shock said:
Well, I will have to disappoint you on that. The rom is smooth and snappy BUT it is by no means as smooth and fast as the Google Pixel. Ofcourse, you can try it and report because your experience may be different
Click to expand...
Click to collapse
OK. Thanks. Will report on my experiences
Mate! I remember you from the s7 edge scene!
Glad that you decide to show some love to OnePlus 3.
You are a brilliant dev and I can recommend all users to try his work.
:fingers-crossed:
Kookitza said:
Mate! I remember you from the s7 edge scene!
Glad that you decide to show some love to OnePlus 3.
You are a brilliant dev and I can recommend all users to try his work.
:fingers-crossed:
Click to expand...
Click to collapse
Glad to see older users !! Do you own a 3/3T now?
t-shock said:
Glad to see older users !! Do you own a 3/3T now?
Click to expand...
Click to collapse
Yep, sold my s7 and bought op3t
Kookitza said:
Yep, sold my s7 and bought op3t
Click to expand...
Click to collapse
I did exaclty the same
I love my 3T although I miss the IP68
Woow congatulations for the rom man 5 stars from me
@t-shock Mate, i can't pass the wizard because of the FC every 2 sec...
Its always return to the first screen of the wizard :\
Here we go
cannot get the in call ui? any fix?
Dirty Flashed the rom on resurrection remix and working very well so far. I just have an issue with the root. I've tried to switch it on and I'd multiple times from Dev options but it doesn't work. Should i flash supersu for root?
Kookitza said:
@t-shock Mate, i can't pass the wizard because of the FC every 2 sec...
Its always return to the first screen of the wizard :\
Click to expand...
Click to collapse
Me too, when the setup pass through the "Just a sec.." screen it stops working.
How to workaround??
Solved, I've just remove the setup wizard from /system/priv-app by using twrp's file manager.
I will test it today and report back. Need to test whether VoLTE works or not though.
Thumbs up for this ROM. I have been waiting for something like this.
Thank you so much.
---------- Post added at 09:40 ---------- Previous post was at 08:56 ----------
BTW, are you using LineageOS 14.1 with extra open commits?
Because there are lot of fixes in that commit.
That would help us a lot, like VoLTE and other fixes.
---------- Post added at 10:27 ---------- Previous post was at 09:40 ----------
I am going to try this with OpenGapps as with the given one I can't able to add google account and more over there is no Google play services at all and I have to manually download from the apkmirror and even after doing that It keeps crashing. I tried whatever the fix you posted, nothing worked out for me.
Will post the update after flashing with OpenGapps.
michael.the.don said:
cannot get the in call ui? any fix?
Click to expand...
Click to collapse
Yes. Go to Default apps and set Google dialer as the default one.
pankajramnani said:
Dirty Flashed the rom on resurrection remix and working very well so far. I just have an issue with the root. I've tried to switch it on and I'd multiple times from Dev options but it doesn't work. Should i flash supersu for root?
Click to expand...
Click to collapse
For me it works just fine. Try flashing root again, whether it's lineage root or supersu
manikandanguru said:
I will test it today and report back. Need to test whether VoLTE works or not though.
Thumbs up for this ROM. I have been waiting for something like this.
Thank you so much.
---------- Post added at 09:40 ---------- Previous post was at 08:56 ----------
BTW, are you using LineageOS 14.1 with extra open commits?
Because there are lot of fixes in that commit.
That would help us a lot, like VoLTE and other fixes.
---------- Post added at 10:27 ---------- Previous post was at 09:40 ----------
I am going to try this with OpenGapps as with the given one I can't able to add google account and more over there is no Google play services at all and I have to manually download from the apkmirror and even after doing that It keeps crashing. I tried whatever the fix you posted, nothing worked out for me.
Will post the update after flashing with OpenGapps.
Click to expand...
Click to collapse
It is based on purely stock Lineage OS, not with extra commits.
OpenGapps will delete some apps and thus the ROM will have many issues eg no launcher or some apps may miss.
Try flashing the ROM and the Gapps (that I gave) without booting and of course wipe everything again
-BE AWARE-
Flash the given Gapps without booting the system. Let me be more specific. Do not boot the ROM before flashing the given Gapps, otherwise you will have many issues.
Also OpenGapps will delete Pixel Launcher and thus you won't be able to use the ROM
michael.the.don said:
cannot get the in call ui? any fix?
Click to expand...
Click to collapse
Go to settings - apps - click on gear icon - click on 'Phone app' and select Phone.
This helped in my case.
As there is no real support for Mi4s on xda, I wanted to create a thread for this device.
Recoveries:
Greatslon 3.1.0.0 for mi4s:
https://www.androidfilehost.com/?fid=457095661767140602
Thread: http://en.miui.com/thread-522096-1-1.html
ZCX-TWRP 3.0.2.X (allows to install libra roms):
Lollipop: https://www.androidfilehost.com/?w=files&flid=92936
Nougat: https://www.androidfilehost.com/?w=files&flid=157723
Thread: http://en.miui.com/thread-522556-1-1.html
Kumaya-TS
https://www.androidfilehost.com/?fid=385035244224383078
Kernels
CM14.1 (with RR-Ramdisk)
r5-Basic (old): Link
All credits for the Kernel go to Cozzmi who works very hard on it. I just added SD-Card support (with cozzmis help) and compiled with UBERTC.
To install any libra-only rom (if you have installed ZCX-TWRP, start at step 4):
1. open Libra-only_ROM.zip\META-INF\com\google\android\updater-script with a text editor (use 7zip/winrar/etc to open the zip in windows)
2. search and replace "libra" with "aqua"
3. Safe (in the zip) and copy the ROM.zip to your phone
4. Backup your current rom
5. Install the new Rom with TWRP
If you want SD-card support:
1. Download my kernel from above (r5-basic) and put it on internal storage
2. Boot TWRP and go to install, install image
3. Install the bootimg you put on your phone, wipe cache/dalvik/data
4. Boot Rom and enjoy
Kernel source code: https://github.com/Demon000/kernel_xiaomi_libra
I would like to use CM based firmware on my mi4s but lack of fingerprint make it not very comfortable!
dominatos1 said:
I would like to use CM based firmware on my mi4s but lack of fingerprint make it not very comfortable!
Click to expand...
Click to collapse
Can you please try the above steps (installing the newest rr/Aicp)? I'll first try to compile a kernel with a good battery life, i'll look into adding fingerprint support after this (though fp is very hard to implement--> maybe it will never be possible ).
Sd-card support should work, if you want to use cm with sd card support but without fp you can pm me.
wertus33333 said:
Can you please try the above steps (installing the newest rr/Aicp)? I'll first try to compile a kernel with a good battery life, i'll look into adding fingerprint support after this (though fp is very hard to implement--> maybe it will never be possible ).
Sd-card support should work, if you want to use cm with sd card support but without fp you can pm me.
Click to expand...
Click to collapse
Will install later. Currently i am in need of my smart much
Can anyone try if this kernel works on Mi4S and AICP/RR?
---------- Post added at 13:41 ---------- Previous post was at 13:32 ----------
Forgot link, sorry.
https://drive.google.com/file/d/0BwtEu4Akbppdbi1jZ3RGZFotTkU/view?usp=sharing
Cozzmy13 said:
Can anyone try if this kernel works on Mi4S and AICP/RR?
---------- Post added at 13:41 ---------- Previous post was at 13:32 ----------
Forgot link, sorry.
https://drive.google.com/file/d/0BwtEu4Akbppdbi1jZ3RGZFotTkU/view?usp=sharing
Click to expand...
Click to collapse
Doesnt work for me, shuts down after mi logo
I compiled a working one with cozzmy's source (all credits to him).
who wants it can pm me. i'll put it in this thread after some tests--> see first post at the end.
Just tried the new kernel with RR-N-v5.8.2-20170408-libra-Official.zip Phone boots fine but touchscreen is not responsive.
ackbarthegreat said:
Just tried the new kernel with RR-N-v5.8.2-20170408-libra-Official.zip Phone boots fine but touchscreen is not responsive. What do you need in order to fix this?
Click to expand...
Click to collapse
I expected this.
Will fix it when I have time.
Hi, Can someone make latest rr build compatible for Aqua? I want to try android 7.1.2
Thanks
Sent from my Mi-4s using Tapatalk
HELP
my mi4s doesnt detect SIM after trying to unlock phone bands :crying::crying::crying::crying:
chelsea_fc said:
Hi, Can someone make latest rr build compatible for Aqua? I want to try android 7.1.2
Thanks
Sent from my Mi-4s using Tapatalk
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-4c/development/official-resurrection-remix-libra-aqua-t3507773 it is working on mine. Just install Libra TWRP.
I am on Resurrection Remix and can say it is much better then miui.. My mi4s working 6 hrs active screen, 1-2 hrs talking, always connected to internet through wifi/mobile internet, viber,whatsapp,vk.com, gmail and other push batterry drainers. The only thing- no fingerprint support.
---------- Post added at 09:28 AM ---------- Previous post was at 09:26 AM ----------
How about fingerprint for RR?
chelsea_fc said:
Hi, Can someone make latest rr build compatible for Aqua? I want to try android 7.1.2
Thanks
Sent from my Mi-4s using Tapatalk
Click to expand...
Click to collapse
Hi
Please use the Guide in first post to get it running. you can then try the new r5-basic bootimg (should work with aqua).
edit: ops, one was faster if u want to stay on mi4s recovery (i recommend greatslon) u only need to edit the updater-script:
1. open Libra-only_ROM.zip\META-INF\com\google\android\updater-script with a text editor
2. search and replace "libra" with "aqua"
3. Safe
Greetings
Wertus
Arielruvalcaba92 said:
my mi4s doesnt detect SIM after trying to unlock phone bands :crying::crying::crying::crying:
Click to expand...
Click to collapse
First of all make sure its no physical problem (change sim to other slot, try it multiple times, try other phone)
If this doesnt work, safe all your data, download official miui (or mi-globe), wipe everything except internal storage in TWRP and install the MIUI (i recommend latest mi-globe, as u can flash it easily in recovery and its downloaded faster).
This will hopefully work, if not tell me.
dominatos1 said:
https://forum.xda-developers.com/mi-4c/development/official-resurrection-remix-libra-aqua-t3507773 it is working on mine. Just install Libra TWRP.
I am on Resurrection Remix and can say it is much better then miui.. My mi4s working 6 hrs active screen, 1-2 hrs talking, always connected to internet through wifi/mobile internet, viber,whatsapp,vk.com, gmail and other push batterry drainers. The only thing- no fingerprint support.
---------- Post added at 09:28 AM ---------- Previous post was at 09:26 AM ----------
How about fingerprint for RR?
Click to expand...
Click to collapse
I'm searching people with experience in this (just started with such things). This looks promising but i'm still trying to get in contact with the dev.
Edit: As far as i understand, the not working FP is a trustzone problem, therefore its necessary to code a compatible libsensor (if any1 knows how to do this/has any tut's/links which could help me get this pls share ). Also it must be implemented in device tree (kernel) cozzmi is working on this (will take some time, dont expect anything soon) and when everything is done its testing, testing, testing (no guarantee that it will ever work).
This kernel doesn't work for me. Will boot but not touchscreen
ackbarthegreat said:
This kernel doesn't work for me. Will boot but not touchscreen
Click to expand...
Click to collapse
Did u try the 20170427 kernel? Should be fixed there.
I had used an older version. 20170427 boots fine. touchscreen works but the 3 hardware keys don't work.
I don't know what it is but my battery life is so much better than it ever was. Thanks for all your hard work.
ackbarthegreat said:
I don't know what it is but my battery life is so much better than it ever was. Thanks for all your hard work.
Click to expand...
Click to collapse
This is due to @Cozzmy13 's kernel optimizations (and maybe the uberTC, did u use uber bootimg?), all credits and honor to him.
Hardware buttons working now? if not, can u try on a clean install? (Recovery, install ROM-->Bootimg-->Magisk installer)
I have built Pixel Experience as a testing rom , I think its stable enough for daily use. I don't have much time to test it so please if you find any bug just tell me and I´ll fix it. Thanks to LineageOS device tree and kernel.
IMPORTANT- Once installed mount system go to /system/app/ims (remove whole folder ) , go to /system/priv-app/CNEservice (remove whole folder ). This is mandatory in order to get data working.
Code:
https://mega.nz/#!x6Zi2CYT!XyRa9Oii_1fc4L4dwJGm3g8Eyl6vR7WjrEvmgx7Rm_E
I installed this ROM right after installing a MIUI ROM, then followed the required steps, and it doesn't boot (it gets stuck at the Google logo). I'm sorry I couldn't be of more help.
SusanaXDA said:
I have built Pixel Experience as a testing rom , I think its stable enough for daily use. I don't have much time to test it so please if you find any bug just tell me and I´ll fix it. Thanks to LineageOS device tree and kernel.
IMPORTANT- Once installed mount system go to /system/app/ims (remove whole folder ) , go to /system/priv-app/CNEservice (remove whole folder ). This is mandatory in order to get data working.
Click to expand...
Click to collapse
Install latest dev global , twrp v11 , before install format data, reboot to twrp, wipe cache data system, install ROM.
SusanaXDA said:
Install latest dev global , twrp v11 , before install format data, reboot to twrp, wipe cache data system, install ROM.
Click to expand...
Click to collapse
I will. Just one thing... do you have a link to the latest dev global rom? I want to make sure I'm installing the right one.
---------- Post added at 01:20 AM ---------- Previous post was at 01:18 AM ----------
Is it the developer rom here? https://en.miui.com/download-343.html
frandavid100 said:
I will. Just one thing... do you have a link to the latest dev global rom? I want to make sure I'm installing the right one.
Click to expand...
Click to collapse
bigota.d.miui.com/8.10.11/miui_MIMIX2SGlobal_8.10.11_1fa84413a2_9.0.zip
frandavid100 said:
I will. Just one thing... do you have a link to the latest dev global rom? I want to make sure I'm installing the right one.
---------- Post added at 01:20 AM ---------- Previous post was at 01:18 AM ----------
Is it the developer rom here? https://en.miui.com/download-343.html
Click to expand...
Click to collapse
Yeah thats It
Nice, I'll get back to you ASAP
Screenshots
http://imgur.com/gallery/D5uBr2p
OK, I just followed all the steps and it seems to be running extremely well. I had been installing GSIs for the latest four days and none of them worked properly, so... I can't begin to thank you enough.
---------- Post added at 02:36 AM ---------- Previous post was at 02:20 AM ----------
There seems to be one hiccup, though. I tried to install Magisk and, although TWRP tells me everything went fine, when I boot there seems to be no trace of SU or Magisk Manager.
---------- Post added at 02:59 AM ---------- Previous post was at 02:36 AM ----------
Also, the notification light doesn't seem to work!
---------- Post added at 03:03 AM ---------- Previous post was at 02:59 AM ----------
Double tap to wake and double press on the power button to open the camera don't seem to work either. Still loving the ROM tho
hello, rom support vietnamese? Thank you
Proximity sensor working?
morpheus620 said:
Proximity sensor working?
Click to expand...
Click to collapse
No, i don't see it work.
People were asking about a PE Pie port so I built it. Device tree related bugs will be fixed by LineageOs devs so I cannot do nothing about that.
This is an early P rom , as same as our Pie device tree so bugs and not working things are common.
I just beg you to be patient , I´ll build the rom each relevant change , so it'll be updated , don't worry about that.
I am working right now for a CAF rom , I am mainly building it for myself but if you like I´ll share it here and support it too.
I am a bit noob dev so I cannot fix really hard things (I am still learning) , I just wanted to show this forum that Mi Mix 2S has a community of devs (few but there we are) and satisfy pie needs of Polaris users.
Thanks a lot for your support and feedback.
SusanaXDA said:
People were asking about a PE Pie port so I built it. Device tree related bugs will be fixed by LineageOs devs so I cannot do nothing about that.
This is an early P rom , as same as our Pie device tree so bugs and not working things are common.
I just beg you to be patient , I´ll build the rom each relevant change , so it'll be updated , don't worry about that.
I am working right now for a CAF rom , I am mainly building it for myself but if you like I´ll share it here and support it too.
I am a bit noob dev so I cannot fix really hard things (I am still learning) , I just wanted to show this forum that Mi Mix 2S has a community of devs (few but there we are) and satisfy pie needs of Polaris users.
Thanks a lot for your support and feedback.
Click to expand...
Click to collapse
Firstly, thank you for your contribution and development on this rom. I have used many roms and this is the rom I like best. Thank you very much and look forward to your future updates! (sorry for mybad English ^^)
Please share your work and ROMs with us ?
What's the difference with gsi?
Everything works so brilliantly except the distance sensor (or Proximately sensor, I am not sure.) which I consider a server issue...do you have any fix patch? I really like your work, I've tried a lot of GSI ROM before, but this could be most smoothly one. Thanks for your effort.
I have transmitted the ROM to CoolApk which is a Chinese android forum. Many people will like it~if you don't allow that I can delete the post.
jayxiao171735 said:
Everything works so brilliantly except the distance sensor (or Proximately sensor, I am not sure.) which I consider a server issue...do you have any fix patch? I really like your work, I've tried a lot of GSI ROM before, but this could be most smoothly one. Thanks for your effort.
I have transmitted the ROM to CoolApk which is a Chinese android forum. Many people will like it~if you don't allow that I can delete the post.
Click to expand...
Click to collapse
so you are cool friends??
Thanks for this rom, started testing immediately.
I'm going to edit this post with the issues I run into, so let's start the list.
Whats working fine:
. Installation ran fine with the given instructions
. Setup went well
. Bluetooth hands free is finally working with android pie *happy*
. Double tap to wake (dt2w) is working flawlessly
Here are the bugs and things I'm missing:
. Switching to dark theme immediately switches to pitch black so you can't see anything on the display anymore. Had to factory reset and set everything up again. This also happens when you set the theme to automatic mode and set a black wallpaper so dark mode is a no-no at the moment
. No accent colour available.
. NFC quick settings tile is missing. NFC works for me, android beam works fast and stable
. Proximity sensor not working
. When connected the phone via BT it shows no signal but everything is working
More to come but I hope this list won't get much longer but only shorter!
Thanks for your efforts and the nice pie rom. I'm glad there are devs around to give this device the love it needs!
I really wanna test this ROM but I need some help...
How and where should I remove the folders in order to get data working?
Also, does this ROM have some kind of gestures navigation(not that from home and back "gesture" from pie)? Once I've used on MIUI, I can't go back to normal buttons navigation anymore.
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
What's working
Mostly everything except for those mentioned in not working list.
What's not working
Permissive for now
More you will tell me
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 16.0
opengapps
Donate
You want support me with coffee or something else?
Donate via PayPal
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @GuaiYiHU @nathanchance @kernel.org
Changelog
Code:
[B]lineage-16.0-20181210-UNOFFICIAL-whyred.zip[/B]
Update blobs from Mi A2
Update default density to 420
Fix SafetyNet
Fix CPU detection
Fix 2nd CPU detection
Sync with latest basickernel sources
Sync with latest LineageOS sources
Sync with latest GuaiYiHu sources
Some other device and kernel stuff
[B]lineage-16.0-20181202-UNOFFICIAL-whyred.zip[/B]
Initial release
Troubleshooting
To start android, enter your password
If you got this error message after booting, you need to format (not wipe) data partition twrp.
You will loose all data on internal storage, so please safe it on your computer or any other place!
After format data partition reboot twrp, copy rom and gapps again to phone and flash again.
Now it should boot and work normal without any needed password.
... and please remember your device is now encrypted. If you ever want to flash another ROM you need to make sure it has that capability.
Encryption and description not support ? ((
Los 15.1 set to encrypted data and does not ask for a password
Stolb said:
Encryption and description not support ? ((
Los 15.1 set to encrypted data and does not ask for a password
Click to expand...
Click to collapse
Some user around this forum (me included) ran into "error" to start android, enter your password after playing with various 9.0 roms.
If anyone got that, following troubleshooting and you are good to go.
Finally, I'll flashed today & give some feedback. It's great if this could be the official
I update from Guaiyihu's lineagos16,and it ask me formating the sdcard.ALL runs well except that.
a2heng said:
I update from Guaiyihu's lineagos16,and it ask me formating the sdcard.ALL runs well except that.
Click to expand...
Click to collapse
Then you need to decrypted
Wow, installing now. Will give a feedback.
rizkajanuar said:
Then you need to decrypted
Click to expand...
Click to collapse
Decrypted the external SDcard...U konw what I said?
Installed. Bugs which not listed: Wi-Fi hotspot didn't work. Some extras didn't translated, lineage camera app need sdcard for photography(even if u have inserted sd), thats all for now. I i find more bugs, i reply to this thread.
Camera works fine here could you take log cat while doing photo and sent it me?
Hotspot will check it asap.
Translation will add by lineage team so can't do anything, for that we have to be patient until lineage team add them time by time.
Sent from my Redmi Note 5 Pro using XDA Labs
sgspluss said:
Some user around this forum (me included) ran into "error" to start android, enter your password after playing with various 9.0 roms.
If anyone got that, following troubleshooting and you are good to go.
Click to expand...
Click to collapse
If that's the "solution", it means decrypting the data. So is encryption not supported?
Sent from my Xiaomi Redmi Note 5 using XDA Labs
sgspluss said:
Camera works fine here could you take log cat while doing photo and sent it me?
Hotspot can confirm will add it to not working.
Translation will add by lineage team so can't do anything, for that we have to be patient until lineage team add them time by time.
Sent from my Redmi Note 5 Pro using XDA Labs
Click to expand...
Click to collapse
I will try a clean install, and let u know if camera isn't working.
Btw i will attach screenshot of bug
VincentJoshuaET said:
If that's the "solution", it means decrypting the data. So is encryption not supported?
Click to expand...
Click to collapse
Encryption should be supported, but can't promise that it really works, since some reported its working and some ran into the under troubleshooting written problem.
Sadly the same problem is present in every android 9.0 rom out for whyred.
jimmy123322 said:
I will try a clean install, and let u know if camera isn't working.
Btw i will attach screenshot of bug
Click to expand...
Click to collapse
How did you flash the rom?
Do you use any modifications?
As written for me camera working fine after clean flash (coming from lineage-15.1)
Also Wi-Fi Hotspot works, just deactivate W-iFi first.
Its more an workaround, but its working.
Will fix that in next update.
Sent from my Redmi Note 5 Pro using XDA Labs
sgspluss said:
How did you flash the rom?
Do you use any modifications?
As written for me camera working fine after clean flash (coming from lineage-15.1)
Also Wi-Fi Hotspot works, just deactivate W-iFi first.
Its more an workaround, but its working.
Will fix that in next update.
Sent from my Redmi Note 5 Pro using XDA Labs
Click to expand...
Click to collapse
I come from LOS 16 from 2018.11.30 from afh.com with dirty flash. I will try clean flash with wiping all! Thanks for ROM! Will u maintain LOS 16, when it comes official?
Thank you, kernel supports kcal?
jimmy123322 said:
I come from LOS 16 from 2018.11.30 from afh.com with dirty flash. I will try clean flash with wiping all! Thanks for ROM! Will u maintain LOS 16, when it comes official?
Click to expand...
Click to collapse
Maybe will continue unoffical or contribute to offical which should came up anytime after christmas by guaiyihu.
guanto96 said:
Thank you, kernel supports kcal?
Click to expand...
Click to collapse
You got your answer already in basickernel thread...
Yes its the same kernel sources just a different name.
Sent from my Redmi Note 5 Pro using XDA Labs
Thx for picking up the project untill the new dev takes over.
Could you take a look at this commit and think about including it.
https://review.lineageos.org/c/LineageOS/android_kernel_xiaomi_sdm660/+/235272
EXPERIMENTAL BUILD
First off this wouldn't be possible without mikeNG, TheMuppets, LineageOS team
I'm just the cook
Devices supported: R7f, ONLY
Do not flash this rom on any other R7 variants. It will brick the device
What works:
Unknown
Haven't tested it fully. All basic functions seem to be in working order.
Will update 'What works / doesn't ' later on.
What doesn't:
Camera issue - Sometimes the camera's color appears to be inverted. Switch HDR on/off fixes it.
Installation notes
Clean install required!
Perform a full wipe when coming from 14.1/15.1
Downloads:
LineageOS 16.0 for Oppo R7f
[Gapps -> ARM ->9.0]
*Don't use the Aroma variant. TWRP doesn't like it
[TWRP Recovery for R7f] (twrp-3.2.1-0 or higher)
Be aware. It's a initial release. Do not expect everything to be working flawlessly. Do make a full backup prior of installing
If you're not fully comfortable/sure about installing an Experimental release than please don't. I'm not responsible for any harm done
**Reserved**
Temp: Please do report any device specific issues
Very good. I will try los16 soon
Holy **** you guys are amazing! After all this time you're still making updates for the Oppo R7 series! Really impressed.
I have an Oppo R7 Plus myself. Any word on if that'll be supported some time as well?
I've tried los 16.0
no meaningful bugs.
overall, I like it very much.
work
1. Cas vooc works
2. Dt2w works
3. The battery saving display is not red
4. Wifi, hotspots work
5. The cellular network feels more stable
Not work
1. Bluetooth sometimes doesn't work
2. Showing download and upload speeds do not work
3. The camera sometimes errors if hdr is on
The rest is quite satisfied with the performance of los 16.0. if there is less and more it will be notified later.
Cmiiw
Thank you very much
Hello I am just a cook as well (just a diff one) but here is an update!
md5sum: https://drive.google.com/open?id=1x1UVAq7mPKUud9iGis4Nyo4o_5x0UBuT
zip: https://drive.google.com/open?id=1jcR2kkAHBewxSdsqs2YNZTaW-RCqITGS
rmb to update if any device-speicific bugs appear
ph03nae said:
Hello I am just a cook as well (just a diff one) but here is an update!
md5sum: https://drive.google.com/open?id=1x1UVAq7mPKUud9iGis4Nyo4o_5x0UBuT
zip: https://drive.google.com/open?id=1jcR2kkAHBewxSdsqs2YNZTaW-RCqITGS
rmb to update if any device-speicific bugs appear
Click to expand...
Click to collapse
if it's more stable. I will try as soon as possible. thank you
ph03nae said:
Hello I am just a cook as well (just a diff one) but here is an update!
md5sum: https://drive.google.com/open?id=1x1UVAq7mPKUud9iGis4Nyo4o_5x0UBuT
zip: https://drive.google.com/open?id=1jcR2kkAHBewxSdsqs2YNZTaW-RCqITGS
rmb to update if any device-speicific bugs appear
Click to expand...
Click to collapse
I've tried your update. everything went smoothly. haven't found a bug. only internet speed can be moved from center to right ??
@ph03nae,
Great to see that you also cooked a v9.0! Do I understand correctly that everything works in your version, including bluetooth and the camera?
eximiusnl said:
@ph03nae,
Great to see that you also cooked a v9.0! Do I understand correctly that everything works in your version, including bluetooth and the camera?
Click to expand...
Click to collapse
I've tried it and used it until now. the camera and bluetooth are running well. haven't found a bug.
That's great!
Here's another update!
md5sum: https://drive.google.com/open?id=1avYrsAHwaNnl2ZJQeiKXf1WU1IHUyYud
zip: https://drive.google.com/open?id=1ohuu8j-zSuvcW7w8CZaIBGx0NPQ0e1Ux
Hi ppl, here's another update!
zip: https://drive.google.com/open?id=1I3nvdnSHWaiYnLlOfAOD_7biEbBBOVEr
md5sum: https://drive.google.com/open?id=13i3E3holmHzN4bJLvwmZDYFktrwiVVo2
enjoy
MAC addresse wrong
Thank you very much!
Yesterday I tried this ROM. Unfortunately, my device's MAC address was always rusty. 02: 00: 00: 00: 00:00. I did it with the latest TWRP program but I also tried the 3.2.1 recommended by you. If the original ColorOs returned, it was good again. I've always done a full wipe. What can I do wrong?
@ph03nae,
Thanks for the update!
What version of GApps do you use? I used the full version before, but since the LineageOS 16 release is bigger, I wonder whether it will fit.
eximiusnl said:
@ph03nae,
Thanks for the update!
What version of GApps do you use? I used the full version before, but since the LineageOS 16 release is bigger, I wonder whether it will fit.
Click to expand...
Click to collapse
For lineageOS 16, I have been using the mini version of GApps instead of the full version because an error sometimes occur saying that there is not enough space for the GApps full version installation. Hope this helps!
@ph03nae,
I followed your advice and also used the mini version of the GApps and installation went flawless.
I noticed that the Pixel Launcher does not work, so you have to use Trebuchet.
I also noticed that battery life is way better than with Android 8.1 !
Thanks for your work, the phone really works fine again.
Could someone please advise me how I can tell if I have an OPPO rplusf or an OPPO rplusg. I live in Australia. Thanks in advance
eximiusnl said:
@ph03nae,
I followed your advice and also used the mini version of the GApps and installation went flawless.
I noticed that the Pixel Launcher does not work, so you have to use Trebuchet.
I also noticed that battery life is way better than with Android 8.1 !
Thanks for your work, the phone really works fine again.
Click to expand...
Click to collapse
You're welcome! (But just to give credit to those who actually work on the code see https://github.com/LineageOS?utf8=✓&q=oppo&type=&language= )
Also, for the issue regarding Pixel Launcher, this is a fix I used (https://forum.xda-developers.com/android/apps-games/pie-pixel-stuff-t3846138) After flashing both zips according to the given instructions, the pixel launcher app can also be updated separately using .apk files.
---------- Post added at 05:20 PM ---------- Previous post was at 05:18 PM ----------
mvjh01 said:
Could someone please advise me how I can tell if I have an OPPO rplusf or an OPPO rplusg. I live in Australia. Thanks in advance
Click to expand...
Click to collapse
Hi, you should be able to access this information by going into settings --> about and find a field for the device ID (or something similar) if you are on the stock rom.
ph03nae said:
You're welcome! (But just to give credit to those who actually work on the code see https://github.com/LineageOS?utf8=✓&q=oppo&type=&language= )
Also, for the issue regarding Pixel Launcher, this is a fix I used (https://forum.xda-developers.com/android/apps-games/pie-pixel-stuff-t3846138) After flashing both zips according to the given instructions, the pixel launcher app can also be updated separately using .apk files.
---------- Post added at 05:20 PM ---------- Previous post was at 05:18 PM ----------
Hi, you should be able to access this information by going into settings --> about and find a field for the device ID (or something similar) if you are on the stock rom.
Click to expand...
Click to collapse
Thanks very much for your help but I have no such field or anything similar plus I had already looked through all 'about phone' settings. I've just tried installing this ROM via the instructions but Project Spectrum fails every time
mvjh01 said:
Thanks very much for your help but I have no such field or anything similar plus I had already looked through all 'about phone' settings. I've just tried installing this ROM via the instructions but Project Spectrum fails every time
Click to expand...
Click to collapse
Correct me if im wrong but I think only the oppo r7g version has Project Spectrum available.