Database Info

[ROM][3/3T][LAOS 14.1] Pixel Experience V1.1

Code:
* Your warranty is now void(almost)---------- Flashing this rom at your own risk
* If you aren't familar with flashing custom roms --------------- STOP HERE!!
* The roms comes as it is----no workarounds --------- no extended development
* If you wish to change or develop this rom -------------- send a P.M. to me
* I will not help you if you have issues and you didnt follow the guide
* Introduction *
I made this ROM, in order to have the best Pixel Experience without any additional/useless features. It is based on the latest Lineage OS and it was built by me. It is working perfectly on my 3T and it should work with the 3 too (unified build)
*Features*
Based on the latest Lineage OS (built by me)
February Security patch
All Google Apps (replaced the stock ones)
Pixel Launcher with round icon support
Pixel Boot Animation
Pixel Sounds
Pixel Live Wallpapers
Pixel's blue accent
Google Assistant
Root is included (you have to enable it from the dev options)
Round Icon for Settings
OnePlus' Recorder app
*Bugs*
Camera is buggy (expected)
*Installation Guide*
PLEASE FOLLOW IT
1. Download the ROM
1b. Download the add-on package (required)
1c. Download the GApps OpenGapps creates many problems)
2. Boot to TWRP
3. Wipe system, data, cache
4. Flash the ROM
5. Boot to the system and finish the setup wizard
6. Boot to TWRP
7. Flash the GApps
8. Flash the add-on
9. Boot to system
9b. In order to have your Phone App fully working, you must set the Google DIaler / Phone as default on the Settings (See here)
10. VOILA
*Download*
Take a look at the 2nd post
*Donations*
Donations are always welcome. But I think it is more than enough just to press the "Thanks" button
XDA:DevDB Information
Pixel Experience, ROM for the OnePlus 3
Contributors
t-shock
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked bootloader and TWRP installed
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2017-02-28
Created 2017-02-27
Last Updated 2017-02-28

Download Section
*Download section*
Links for:
ROM: Here
Add-ON: Here (you MUST flash this only on my LAOS and not on the official one)
Gapps: Here
*Changelog*
Version 1.1:
1. Another layout of the rom. Easier to fix any issue and easier to update.

F.A.Q
Frequently Asked Questions (F.A.Q)
You may have some questions about this whole project and this is completely normal. So let’s begin
Q: Google Play Services force closes a lot
A: No reason to panic. Just follow my guide and everything will work just fine.
1. Connect with your WiFi
2. Go to Settings → Apps and find the Google Play Services.
3. Wipe Data and Cache
4. Go to Permission of the app, and enable everything
5. Add your Google Account
6. Voila
Q: The SimToolKit is missing. I need it
A: Flash this zip and it will be restored. I removed it because it wasnt round (uploading)
Q: Can I flash any other Gapps package?
A: NO. The other packages replaces apps that are vital for the phone and it may lead to a bad experience overall
Q: Why did you made this rom?
A: I wanted to have a great Pixel Experience (thus its name)
Q: Any screenshot?
A: Take a look at the Screenshot category
*Thanks to*
Lineage OS Team for managing to create this rom for our 3/3T

@t-shock. Hi. Can I expect this to have the same level of pixel smoothness? I really love smooth Roms and I would really like to try this out. It's just that in my experience, Roms that are based on lineage is tend to be not so smooth. I promise am not trolling. Thanks

kscjx said:
@t-shock. Hi. Can I expect this to have the same level of pixel smoothness? I really love smooth Roms and I would really like to try this out. It's just that in my experience, Roms that are based on lineage is tend to be not so smooth. I promise am not trolling. Thanks
Click to expand...
Click to collapse
Well, I will have to disappoint you on that. The rom is smooth and snappy BUT it is by no means as smooth and fast as the Google Pixel. Ofcourse, you can try it and report because your experience may be different

t-shock said:
Well, I will have to disappoint you on that. The rom is smooth and snappy BUT it is by no means as smooth and fast as the Google Pixel. Ofcourse, you can try it and report because your experience may be different
Click to expand...
Click to collapse
OK. Thanks. Will report on my experiences

Mate! I remember you from the s7 edge scene!
Glad that you decide to show some love to OnePlus 3.
You are a brilliant dev and I can recommend all users to try his work.
:fingers-crossed:

Kookitza said:
Mate! I remember you from the s7 edge scene!
Glad that you decide to show some love to OnePlus 3.
You are a brilliant dev and I can recommend all users to try his work.
:fingers-crossed:
Click to expand...
Click to collapse
Glad to see older users !! Do you own a 3/3T now?

t-shock said:
Glad to see older users !! Do you own a 3/3T now?
Click to expand...
Click to collapse
Yep, sold my s7 and bought op3t

Kookitza said:
Yep, sold my s7 and bought op3t
Click to expand...
Click to collapse
I did exaclty the same
I love my 3T although I miss the IP68

Woow congatulations for the rom man 5 stars from me

@t-shock Mate, i can't pass the wizard because of the FC every 2 sec...
Its always return to the first screen of the wizard :\

Here we go

cannot get the in call ui? any fix?

Dirty Flashed the rom on resurrection remix and working very well so far. I just have an issue with the root. I've tried to switch it on and I'd multiple times from Dev options but it doesn't work. Should i flash supersu for root?

Kookitza said:
@t-shock Mate, i can't pass the wizard because of the FC every 2 sec...
Its always return to the first screen of the wizard :\
Click to expand...
Click to collapse
Me too, when the setup pass through the "Just a sec.." screen it stops working.
How to workaround??
Solved, I've just remove the setup wizard from /system/priv-app by using twrp's file manager.

I will test it today and report back. Need to test whether VoLTE works or not though.
Thumbs up for this ROM. I have been waiting for something like this.
Thank you so much.
---------- Post added at 09:40 ---------- Previous post was at 08:56 ----------
BTW, are you using LineageOS 14.1 with extra open commits?
Because there are lot of fixes in that commit.
That would help us a lot, like VoLTE and other fixes.
---------- Post added at 10:27 ---------- Previous post was at 09:40 ----------
I am going to try this with OpenGapps as with the given one I can't able to add google account and more over there is no Google play services at all and I have to manually download from the apkmirror and even after doing that It keeps crashing. I tried whatever the fix you posted, nothing worked out for me.
Will post the update after flashing with OpenGapps.

michael.the.don said:
cannot get the in call ui? any fix?
Click to expand...
Click to collapse
Yes. Go to Default apps and set Google dialer as the default one.
pankajramnani said:
Dirty Flashed the rom on resurrection remix and working very well so far. I just have an issue with the root. I've tried to switch it on and I'd multiple times from Dev options but it doesn't work. Should i flash supersu for root?
Click to expand...
Click to collapse
For me it works just fine. Try flashing root again, whether it's lineage root or supersu
manikandanguru said:
I will test it today and report back. Need to test whether VoLTE works or not though.
Thumbs up for this ROM. I have been waiting for something like this.
Thank you so much.
---------- Post added at 09:40 ---------- Previous post was at 08:56 ----------
BTW, are you using LineageOS 14.1 with extra open commits?
Because there are lot of fixes in that commit.
That would help us a lot, like VoLTE and other fixes.
---------- Post added at 10:27 ---------- Previous post was at 09:40 ----------
I am going to try this with OpenGapps as with the given one I can't able to add google account and more over there is no Google play services at all and I have to manually download from the apkmirror and even after doing that It keeps crashing. I tried whatever the fix you posted, nothing worked out for me.
Will post the update after flashing with OpenGapps.
Click to expand...
Click to collapse
It is based on purely stock Lineage OS, not with extra commits.
OpenGapps will delete some apps and thus the ROM will have many issues eg no launcher or some apps may miss.
Try flashing the ROM and the Gapps (that I gave) without booting and of course wipe everything again

-BE AWARE-
Flash the given Gapps without booting the system. Let me be more specific. Do not boot the ROM before flashing the given Gapps, otherwise you will have many issues.
Also OpenGapps will delete Pixel Launcher and thus you won't be able to use the ROM

michael.the.don said:
cannot get the in call ui? any fix?
Click to expand...
Click to collapse
Go to settings - apps - click on gear icon - click on 'Phone app' and select Phone.
This helped in my case.

[Guide] MI4S users help me to help you!

As there is no real support for Mi4s on xda, I wanted to create a thread for this device.
Recoveries:
Greatslon 3.1.0.0 for mi4s:
https://www.androidfilehost.com/?fid=457095661767140602
Thread: http://en.miui.com/thread-522096-1-1.html
ZCX-TWRP 3.0.2.X (allows to install libra roms):
Lollipop: https://www.androidfilehost.com/?w=files&flid=92936
Nougat: https://www.androidfilehost.com/?w=files&flid=157723
Thread: http://en.miui.com/thread-522556-1-1.html
Kumaya-TS
https://www.androidfilehost.com/?fid=385035244224383078
Kernels
CM14.1 (with RR-Ramdisk)
r5-Basic (old): Link
All credits for the Kernel go to Cozzmi who works very hard on it. I just added SD-Card support (with cozzmis help) and compiled with UBERTC.
To install any libra-only rom (if you have installed ZCX-TWRP, start at step 4):
1. open Libra-only_ROM.zip\META-INF\com\google\android\updater-script with a text editor (use 7zip/winrar/etc to open the zip in windows)
2. search and replace "libra" with "aqua"
3. Safe (in the zip) and copy the ROM.zip to your phone
4. Backup your current rom
5. Install the new Rom with TWRP
If you want SD-card support:
1. Download my kernel from above (r5-basic) and put it on internal storage
2. Boot TWRP and go to install, install image
3. Install the bootimg you put on your phone, wipe cache/dalvik/data
4. Boot Rom and enjoy
Kernel source code: https://github.com/Demon000/kernel_xiaomi_libra

I would like to use CM based firmware on my mi4s but lack of fingerprint make it not very comfortable!

dominatos1 said:
I would like to use CM based firmware on my mi4s but lack of fingerprint make it not very comfortable!
Click to expand...
Click to collapse
Can you please try the above steps (installing the newest rr/Aicp)? I'll first try to compile a kernel with a good battery life, i'll look into adding fingerprint support after this (though fp is very hard to implement--> maybe it will never be possible ).
Sd-card support should work, if you want to use cm with sd card support but without fp you can pm me.

wertus33333 said:
Can you please try the above steps (installing the newest rr/Aicp)? I'll first try to compile a kernel with a good battery life, i'll look into adding fingerprint support after this (though fp is very hard to implement--> maybe it will never be possible ).
Sd-card support should work, if you want to use cm with sd card support but without fp you can pm me.
Click to expand...
Click to collapse
Will install later. Currently i am in need of my smart much

Can anyone try if this kernel works on Mi4S and AICP/RR?
---------- Post added at 13:41 ---------- Previous post was at 13:32 ----------
Forgot link, sorry.
https://drive.google.com/file/d/0BwtEu4Akbppdbi1jZ3RGZFotTkU/view?usp=sharing

Cozzmy13 said:
Can anyone try if this kernel works on Mi4S and AICP/RR?
---------- Post added at 13:41 ---------- Previous post was at 13:32 ----------
Forgot link, sorry.
https://drive.google.com/file/d/0BwtEu4Akbppdbi1jZ3RGZFotTkU/view?usp=sharing
Click to expand...
Click to collapse
Doesnt work for me, shuts down after mi logo

I compiled a working one with cozzmy's source (all credits to him).
who wants it can pm me. i'll put it in this thread after some tests--> see first post at the end.

Just tried the new kernel with RR-N-v5.8.2-20170408-libra-Official.zip Phone boots fine but touchscreen is not responsive.

ackbarthegreat said:
Just tried the new kernel with RR-N-v5.8.2-20170408-libra-Official.zip Phone boots fine but touchscreen is not responsive. What do you need in order to fix this?
Click to expand...
Click to collapse
I expected this.
Will fix it when I have time.

Hi, Can someone make latest rr build compatible for Aqua? I want to try android 7.1.2
Thanks
Sent from my Mi-4s using Tapatalk

HELP
my mi4s doesnt detect SIM after trying to unlock phone bands :crying::crying::crying::crying:

chelsea_fc said:
Hi, Can someone make latest rr build compatible for Aqua? I want to try android 7.1.2
Thanks
Sent from my Mi-4s using Tapatalk
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-4c/development/official-resurrection-remix-libra-aqua-t3507773 it is working on mine. Just install Libra TWRP.
I am on Resurrection Remix and can say it is much better then miui.. My mi4s working 6 hrs active screen, 1-2 hrs talking, always connected to internet through wifi/mobile internet, viber,whatsapp,vk.com, gmail and other push batterry drainers. The only thing- no fingerprint support.
---------- Post added at 09:28 AM ---------- Previous post was at 09:26 AM ----------
How about fingerprint for RR?

chelsea_fc said:
Hi, Can someone make latest rr build compatible for Aqua? I want to try android 7.1.2
Thanks
Sent from my Mi-4s using Tapatalk
Click to expand...
Click to collapse
Hi
Please use the Guide in first post to get it running. you can then try the new r5-basic bootimg (should work with aqua).
edit: ops, one was faster if u want to stay on mi4s recovery (i recommend greatslon) u only need to edit the updater-script:
1. open Libra-only_ROM.zip\META-INF\com\google\android\updater-script with a text editor
2. search and replace "libra" with "aqua"
3. Safe
Greetings
Wertus

Arielruvalcaba92 said:
my mi4s doesnt detect SIM after trying to unlock phone bands :crying::crying::crying::crying:
Click to expand...
Click to collapse
First of all make sure its no physical problem (change sim to other slot, try it multiple times, try other phone)
If this doesnt work, safe all your data, download official miui (or mi-globe), wipe everything except internal storage in TWRP and install the MIUI (i recommend latest mi-globe, as u can flash it easily in recovery and its downloaded faster).
This will hopefully work, if not tell me.

dominatos1 said:
https://forum.xda-developers.com/mi-4c/development/official-resurrection-remix-libra-aqua-t3507773 it is working on mine. Just install Libra TWRP.
I am on Resurrection Remix and can say it is much better then miui.. My mi4s working 6 hrs active screen, 1-2 hrs talking, always connected to internet through wifi/mobile internet, viber,whatsapp,vk.com, gmail and other push batterry drainers. The only thing- no fingerprint support.
---------- Post added at 09:28 AM ---------- Previous post was at 09:26 AM ----------
How about fingerprint for RR?
Click to expand...
Click to collapse
I'm searching people with experience in this (just started with such things). This looks promising but i'm still trying to get in contact with the dev.
Edit: As far as i understand, the not working FP is a trustzone problem, therefore its necessary to code a compatible libsensor (if any1 knows how to do this/has any tut's/links which could help me get this pls share ). Also it must be implemented in device tree (kernel) cozzmi is working on this (will take some time, dont expect anything soon) and when everything is done its testing, testing, testing (no guarantee that it will ever work).

This kernel doesn't work for me. Will boot but not touchscreen

ackbarthegreat said:
This kernel doesn't work for me. Will boot but not touchscreen
Click to expand...
Click to collapse
Did u try the 20170427 kernel? Should be fixed there.

I had used an older version. 20170427 boots fine. touchscreen works but the 3 hardware keys don't work.

I don't know what it is but my battery life is so much better than it ever was. Thanks for all your hard work.

ackbarthegreat said:
I don't know what it is but my battery life is so much better than it ever was. Thanks for all your hard work.
Click to expand...
Click to collapse
This is due to @Cozzmy13 's kernel optimizations (and maybe the uberTC, did u use uber bootimg?), all credits and honor to him.
Hardware buttons working now? if not, can u try on a clean install? (Recovery, install ROM-->Bootimg-->Magisk installer)

Close thread please, now official is available.

CLOSE THREAD PLEASE NOW OFFICIAL IS AVAILABLE.
After years of taking from the community i decided to give back, as aclegg2011 moved onto pastures new i decided to start building RR unofficial with latest security and patch updates.
There may be bugs i tested on my device after compiling and everything is working as it should,
Would like to thank the Ressurection Remix team and everyone who helps maintain the repos and fixes.
Installation same as usual rom then gapps then reboot
tldr, i am not responsible for broken devices, i personally check the builds soon as its compiled for issues.
Android file host https://www.androidfilehost.com/?w=files&flid=183635
Enjoy
Dont forget to hit the you know what button if you want more in the future

Thanks for taking this over but your link isn't working for downloads.

Should be working now

Has anyone tested if auto-rotate is working on this? Doesn't seem to be working for me.

same here, i had to use rotation app just to rotate, hoping it will be fixed on next update.

New build up with rotate screen issue fixed must have missed a driver setting up...

Thank you!!!

For anyone about to ask, or just curious.......this dirty flashes over the last official RR just fine w/ no problems . Many thanks to you @aradalien !!!! Cheers

NPS I like how customisable RR is so I decided to build it, today's build should have no issues, I'll mainly update on security patches and droid updates or if new features are added to the framework. ?

Quick question...are Night Light and Google Assistant features on this build? Thanks

Yes they are on the build.

Aradalienz said:
NPS I like how customisable RR is so I decided to build it, today's build should have no issues, I'll mainly update on security patches and droid updates or if new features are added to the framework. ?
Click to expand...
Click to collapse
Many thanks for this. RR really is the best ROM for the N7 2013.
Please consider doing this for Deb as well.

I installed right now this new rom, very impressed. Also installed ElementalX and works perfect together. Thanks a lot for this great rom!!!
Only an observation concerning installation.
First i made clean wipe (all except internal storage), then installed the rom and open_gapps-arm-7.1-pico-20170527 together and then reboot system.
the reboot was ok, but on beginning of configuration, where i could choose between new device or copy existing, it was not possible to choose, always closed the configurtion.
This already happened before with other roms, might be a problem with wifi detection or something like this.
so i made once more clean wipe then installed only the rom and boot ok, then configured the wifi, and rebooted once more to TWRP and installed the opengapps.
In this way i could follow.
Perhaps you can put this also to your installation guide, that it´s better to install separately the rom and the opengapps.
One more question: i saw in a Forum a comment that in RR (older versions) might be Substratum incluided, but in your new rom i cannot find?
Thanks once more for all

tombraga said:
I installed right now this new rom, very impressed. Also installed ElementalX and works perfect together. Thanks a lot for this great rom!!!
Only an observation concerning installation.
First i made clean wipe (all except internal storage), then installed the rom and open_gapps-arm-7.1-pico-20170527 together and then reboot system.
the reboot was ok, but on beginning of configuration, where i could choose between new device or copy existing, it was not possible to choose, always closed the configurtion.
This already happened before with other roms, might be a problem with wifi detection or something like this.
so i made once more clean wipe then installed only the rom and boot ok, then configured the wifi, and rebooted once more to TWRP and installed the opengapps.
In this way i could follow.
Perhaps you can put this also to your installation guide, that it´s better to install separately the rom and the opengapps.
One more question: i saw in a Forum a comment that in RR (older versions) might be Substratum incluided, but in your new rom i cannot find?
Thanks once more for all
Click to expand...
Click to collapse
I don't use RR but many other 7.1.2 ROMs work better with Beans GAPPs instead of Open GAPPs. Also you should be able to install Substratum from Play Store. If RR supports Substratum that is. Hope this helps.

I used to use RR but switched to other rom's when support for RR ended. I recently clean flashed the latest RR and used Beans gapps mini with absolutely no problems. Everything went smoothly and the post-flash setup and configuration with re-population from Google went off without a hitch. The only thing I have noticed so far is that the OTA update check doesn't seem to be functioning. I recall this was a problem with earlier RR builds but it was fixed in more recent ones. Is this something others have noticed? Thanks again for keeping RR alive for our flo's!

Nomad1600 said:
I don't use RR but many other 7.1.2 ROMs work better with Beans GAPPs instead of Open GAPPs. Also you should be able to install Substratum from Play Store. If RR supports Substratum that is. Hope this helps.
Click to expand...
Click to collapse
thank you!
question to dev:
this rom supports Swift Black Substratum Theme?
https://play.google.com/store/apps/details?id=com.brit.swiftblack.layers&hl=de

I'm pretty interested in this ROM but is possible to add full OMS support?
Enviado desde mi Nexus 7 mediante Tapatalk

Very happy with this Rom, thanks.
http://downloads.magoarte.com/Forum/RR mit ElementalX.jpg

Gapps
I only tested with BeanGapps mini and they work perfectly open gaps are a bit weird on 7.1.2 atm
tombraga said:
I installed right now this new rom, very impressed. Also installed ElementalX and works perfect together. Thanks a lot for this great rom!!!
Only an observation concerning installation.
First i made clean wipe (all except internal storage), then installed the rom and open_gapps-arm-7.1-pico-20170527 together and then reboot system.
the reboot was ok, but on beginning of configuration, where i could choose between new device or copy existing, it was not possible to choose, always closed the configurtion.
This already happened before with other roms, might be a problem with wifi detection or something like this.
so i made once more clean wipe then installed only the rom and boot ok, then configured the wifi, and rebooted once more to TWRP and installed the opengapps.
In this way i could follow.
Perhaps you can put this also to your installation guide, that it´s better to install separately the rom and the opengapps.
I only tested with BeanGapps mini and they work perfectly open gaps are a bit weird on 7.1.2 atm
One more question: i saw in a Forum a comment that in RR (older versions) might be Substratum incluided, but in your new rom i cannot find?
Thanks once more for all
Click to expand...
Click to collapse

I just want too say im no dev just a builder any fixes will come from source and RR sorry,
Btw OMS is fully supported its just not installed by default it appears in the settings menu
when installed.

[PIE - Testing] Pixel Experience for Polaris - By SusanaXDA

I have built Pixel Experience as a testing rom , I think its stable enough for daily use. I don't have much time to test it so please if you find any bug just tell me and I´ll fix it. Thanks to LineageOS device tree and kernel.
IMPORTANT- Once installed mount system go to /system/app/ims (remove whole folder ) , go to /system/priv-app/CNEservice (remove whole folder ). This is mandatory in order to get data working.
Code:
https://mega.nz/#!x6Zi2CYT!XyRa9Oii_1fc4L4dwJGm3g8Eyl6vR7WjrEvmgx7Rm_E

I installed this ROM right after installing a MIUI ROM, then followed the required steps, and it doesn't boot (it gets stuck at the Google logo). I'm sorry I couldn't be of more help.

SusanaXDA said:
I have built Pixel Experience as a testing rom , I think its stable enough for daily use. I don't have much time to test it so please if you find any bug just tell me and I´ll fix it. Thanks to LineageOS device tree and kernel.
IMPORTANT- Once installed mount system go to /system/app/ims (remove whole folder ) , go to /system/priv-app/CNEservice (remove whole folder ). This is mandatory in order to get data working.
Click to expand...
Click to collapse
Install latest dev global , twrp v11 , before install format data, reboot to twrp, wipe cache data system, install ROM.

SusanaXDA said:
Install latest dev global , twrp v11 , before install format data, reboot to twrp, wipe cache data system, install ROM.
Click to expand...
Click to collapse
I will. Just one thing... do you have a link to the latest dev global rom? I want to make sure I'm installing the right one.
---------- Post added at 01:20 AM ---------- Previous post was at 01:18 AM ----------
Is it the developer rom here? https://en.miui.com/download-343.html

frandavid100 said:
I will. Just one thing... do you have a link to the latest dev global rom? I want to make sure I'm installing the right one.
Click to expand...
Click to collapse
bigota.d.miui.com/8.10.11/miui_MIMIX2SGlobal_8.10.11_1fa84413a2_9.0.zip

frandavid100 said:
I will. Just one thing... do you have a link to the latest dev global rom? I want to make sure I'm installing the right one.
---------- Post added at 01:20 AM ---------- Previous post was at 01:18 AM ----------
Is it the developer rom here? https://en.miui.com/download-343.html
Click to expand...
Click to collapse
Yeah thats It

Nice, I'll get back to you ASAP

Screenshots
http://imgur.com/gallery/D5uBr2p

OK, I just followed all the steps and it seems to be running extremely well. I had been installing GSIs for the latest four days and none of them worked properly, so... I can't begin to thank you enough.
---------- Post added at 02:36 AM ---------- Previous post was at 02:20 AM ----------
There seems to be one hiccup, though. I tried to install Magisk and, although TWRP tells me everything went fine, when I boot there seems to be no trace of SU or Magisk Manager.
---------- Post added at 02:59 AM ---------- Previous post was at 02:36 AM ----------
Also, the notification light doesn't seem to work!
---------- Post added at 03:03 AM ---------- Previous post was at 02:59 AM ----------
Double tap to wake and double press on the power button to open the camera don't seem to work either. Still loving the ROM tho

hello, rom support vietnamese? Thank you

Proximity sensor working?

morpheus620 said:
Proximity sensor working?
Click to expand...
Click to collapse
No, i don't see it work.

People were asking about a PE Pie port so I built it. Device tree related bugs will be fixed by LineageOs devs so I cannot do nothing about that.
This is an early P rom , as same as our Pie device tree so bugs and not working things are common.
I just beg you to be patient , I´ll build the rom each relevant change , so it'll be updated , don't worry about that.
I am working right now for a CAF rom , I am mainly building it for myself but if you like I´ll share it here and support it too.
I am a bit noob dev so I cannot fix really hard things (I am still learning) , I just wanted to show this forum that Mi Mix 2S has a community of devs (few but there we are) and satisfy pie needs of Polaris users.
Thanks a lot for your support and feedback.

SusanaXDA said:
People were asking about a PE Pie port so I built it. Device tree related bugs will be fixed by LineageOs devs so I cannot do nothing about that.
This is an early P rom , as same as our Pie device tree so bugs and not working things are common.
I just beg you to be patient , I´ll build the rom each relevant change , so it'll be updated , don't worry about that.
I am working right now for a CAF rom , I am mainly building it for myself but if you like I´ll share it here and support it too.
I am a bit noob dev so I cannot fix really hard things (I am still learning) , I just wanted to show this forum that Mi Mix 2S has a community of devs (few but there we are) and satisfy pie needs of Polaris users.
Thanks a lot for your support and feedback.
Click to expand...
Click to collapse
Firstly, thank you for your contribution and development on this rom. I have used many roms and this is the rom I like best. Thank you very much and look forward to your future updates! (sorry for mybad English ^^)

Please share your work and ROMs with us ?

What's the difference with gsi?

Everything works so brilliantly except the distance sensor (or Proximately sensor, I am not sure.) which I consider a server issue...do you have any fix patch? I really like your work, I've tried a lot of GSI ROM before, but this could be most smoothly one. Thanks for your effort.
I have transmitted the ROM to CoolApk which is a Chinese android forum. Many people will like it~if you don't allow that I can delete the post.

jayxiao171735 said:
Everything works so brilliantly except the distance sensor (or Proximately sensor, I am not sure.) which I consider a server issue...do you have any fix patch? I really like your work, I've tried a lot of GSI ROM before, but this could be most smoothly one. Thanks for your effort.
I have transmitted the ROM to CoolApk which is a Chinese android forum. Many people will like it~if you don't allow that I can delete the post.
Click to expand...
Click to collapse
so you are cool friends??

Thanks for this rom, started testing immediately.
I'm going to edit this post with the issues I run into, so let's start the list.
Whats working fine:
. Installation ran fine with the given instructions
. Setup went well
. Bluetooth hands free is finally working with android pie *happy*
. Double tap to wake (dt2w) is working flawlessly
Here are the bugs and things I'm missing:
. Switching to dark theme immediately switches to pitch black so you can't see anything on the display anymore. Had to factory reset and set everything up again. This also happens when you set the theme to automatic mode and set a black wallpaper so dark mode is a no-no at the moment
. No accent colour available.
. NFC quick settings tile is missing. NFC works for me, android beam works fast and stable
. Proximity sensor not working
. When connected the phone via BT it shows no signal but everything is working
More to come but I hope this list won't get much longer but only shorter!
Thanks for your efforts and the nice pie rom. I'm glad there are devs around to give this device the love it needs!

I really wanna test this ROM but I need some help...
How and where should I remove the folders in order to get data working?
Also, does this ROM have some kind of gestures navigation(not that from home and back "gesture" from pie)? Once I've used on MIUI, I can't go back to normal buttons navigation anymore.

[ROM][Unofficial][9.0.0_r46/Pie][X/X Dualsim/X Compact/Touch] AOSP9 - 20200206 builds

Please see this post in Xperia X forum and thread about AOSP9 builds for all Loire device, including Xperia X Compact / F5321

Thank you for the info, I will try it

Insane, thank you!!!

Fantastic news. Been waiting patiently for an update the past couple months. Just flashed this and it's working very smoothly, stable and no battery drain so far. Thanks for sharing!

20200307 build: 4.9.214 and 4.9.215 kernel updates
AOSP-9-F5321-20200307-4.9.214brcmfmac.zip
An updated clean build with 4.9.214 kernel (boot.img), and proposed 4.9.215 update (boot-4.9.215.img).
Please test 4.9.215 in priority, and in case of problem fallback to 4.9.214.
Both kernels have proposed wifi/brcmfmac update.
Not sure if flashing only the boot img over previous build will work: in case it doesn't, please do a complete/clean flash...

Is there anyhow fast charge available?

Hi everyone,
I am currently using AOSP 9.0-r46 with the 4.9.213 kernel. I compiled the image by myself following the build instructions provided by sony, so my problem meight not be reletated to the build of vknecht. Anyways, I have problems with the camera. No matter what app I am using (OpenCamera, AOSP-Camera or PhotoDirector) the auto focus fails to focus far away objects under bad light conditions. Objects near by can be focused without any problems. Also the focus of an landscape fails when it gets to dark.
I guess this is related to the proximity sensor, since the focus always fails if I cover it.
Does anyone have experienced the same problem or can reproduce it?

20200422 build: 4.9.219 kernel update
Posted updated build in Xperia X forum

vknecht said:
Posted updated build in Xperia X forum
Click to expand...
Click to collapse
Great job thanks for the update :victory:
---------- Post added at 11:52 AM ---------- Previous post was at 11:50 AM ----------
legenbaer said:
Hi everyone,
I am currently using AOSP 9.0-r46 with the 4.9.213 kernel. I compiled the image by myself following the build instructions provided by sony, so my problem meight not be reletated to the build of vknecht. Anyways, I have problems with the camera. No matter what app I am using (OpenCamera, AOSP-Camera or PhotoDirector) the auto focus fails to focus far away objects under bad light conditions. Objects near by can be focused without any problems. Also the focus of an landscape fails when it gets to dark.
I guess this is related to the proximity sensor, since the focus always fails if I cover it.
Does anyone have experienced the same problem or can reproduce it?
Click to expand...
Click to collapse
I haven't come across this issue before. Are you only experiencing it with AOSP? Is your phone case or rear cover perhaps blocking the sensor in any way?

20201003 update : new boot.img with kernel 4.9.230
Updated the release post with links to new boot.img including 4.9.230 kernel.

AOSP10 build with gapps
If you feel like trying it, just uploading an AOSP10 build with included gapps for X Compact, please see this post.
Not super-stable (eg. reboots while booting), but should be at least as good as AOSP9 build, once it boots...
Non gapps build should follow later...

vknecht said:
If you feel like trying it, just uploading an AOSP10 build with included gapps for X Compact, please see this post.
Not super-stable (eg. reboots while booting), but should be at least as good as AOSP9 build, once it boots...
Non gapps build should follow later...
Click to expand...
Click to collapse
I will try it soon.

vknecht said:
If you feel like trying it, just uploading an AOSP10 build with included gapps for X Compact, please see this post.
Not super-stable (eg. reboots while booting), but should be at least as good as AOSP9 build, once it boots...
Non gapps build should follow later...
Click to expand...
Click to collapse
Excited to try this and thanks for still supporting kugo! I still use it as my primary device, running minextu's AOSP 10 (May security patch) but will flash yours too so see how it compares.

vknecht said:
If you feel like trying it, just uploading an AOSP10 build with included gapps for X Compact, please see this post.
Not super-stable (eg. reboots while booting), but should be at least as good as AOSP9 build, once it boots...
Non gapps build should follow later...
Click to expand...
Click to collapse
Thank you for my XC, will wait for non gapps build for testing.

I'll also wait for non gapps version. By the way I suppose you build with the kernel version which reduces reboots.
Enviado desde mi Xperia X Compact mediante Tapatalk

evilorb said:
Thank you for my XC, will wait for non gapps build for testing.
Click to expand...
Click to collapse
maluus said:
I'll also wait for non gapps version. By the way I suppose you build with the kernel version which reduces reboots.
Click to expand...
Click to collapse
Indeed, these builds are with latest-best-known-as-of-yet kernel (seen as 4.9.230 version)...
Here you go for non-gapps F5321 build :
e46ecc1d097b3c3645954b5d83d03f0e AOSP-10-F5321-20201101-4.9.230.zip

vknecht said:
Indeed, these builds are with latest-best-known-as-of-yet kernel (seen as 4.9.230 version)...
Here you go for non-gapps F5321 build :
e46ecc1d097b3c3645954b5d83d03f0e AOSP-10-F5321-20201101-4.9.230.zip
Click to expand...
Click to collapse
Just flashed this and so far so good! If you accept PP donations let us know. Thanks again!

wi-fi hotspot doesn't work. it turns off itself a few seconds after turning off. is this a known issue? Also bluetooh has a problem I guess. couldn't connect with pc. pairing is succesfull but when you try to connect. goes to pairing screen again. it seems good other than that. no battery drain so far.

Hey yes this is a known issue. Might be related to the kernel not sure. The previous aosp 10 from minextu has the same problem.