hello people
it come to me a xperia e3 D2206 in this state:
won't turn on, black display.
when connect to pc it is show as SEMC flash device, what ever combinations of button that i use.
i ask you this is hardbrik, exist any solution for this.
the flashtool dont see the device, the pc companion neither too.
i have installed the flashtool 0.9.19.10 with the last drivers.
so
thanks in advance
Download flash tool for Sony and hold volume down and then connect USB to Pc making sure flashtool is on. The phone should get connected in flash mode then flash stock rom
rahulkapadiya1 said:
Download flash tool for Sony and hold volume down and then connect USB to Pc making sure flashtool is on. The phone should get connected in flash mode then flash stock rom
Click to expand...
Click to collapse
thanks for your answer but i did in this way and the pc recognize the mobil in the same way alwys as SEMC device and flastool dont see the mobil en flashmode......... i disassemble the device battery put off, put on again and put volun down and usb to pc so the same behavior.
thanks in advance
---------- Post added at 02:05 PM ---------- Previous post was at 02:04 PM ----------
BNBN85 said:
thanks for your answer but i did in this way and the pc recognize the mobil in the same way alwys as SEMC device and flastool dont see the mobil en flashmode......... i disassemble the device battery put off, put on again and put volun down and usb to pc so the same behavior.
thanks in advance
Click to expand...
Click to collapse
Are you holding volume down button? And then connect USB. Share attachment what shows in your pc when you connect it. Remember you have to press and hold volume down until you connect USB to Pc. And make sure that flashtool is open when you connect USB else it won't connect in flash mode
rahulkapadiya1 said:
---------- Post added at 02:05 PM ---------- Previous post was at 02:04 PM ----------
Are you holding volume down button? And then connect USB. Share attachment what shows in your PC when you connect it. Remember you have to press and hold volume down until you connect USB to Pc. And make sure that flashtool is open when you connect USB else it won't connect in flash mode
Click to expand...
Click to collapse
hi again
i appreciate your time and your world but i stay in the same situation.
well my pc is seem to be don't show the xperia e3 d2206 as flash-mode or the Mobil can't enter in this mode, the flash tool say "device connect with USB debugging off" (is this a problem? how to enable USB debugging with the brick phone).
So i installed the Sony PC companion and before do the repair thing to update or install the firmware my device admin in PC had shown me a SEMC flash device, now when the Sony PC companion do it the repair things, the devices admin show me a SOMC flash device and i can't flash with the Sony PC companion too, because i stay in the same situation i cant put the xperia e3 D2206 in flash mode.
thanks in advance
i wait for your answer.
Related
I was trying to flash my miro with a stock firmware using flashtool but it says usb debugging is turned off. I had turned it on lastly when i was using it.
Any help will be appreciated !
For more info:
I am on win 8 64-bit
Trying to flash using 0.9.2.1 flashtool
Even tried PC companion....but no luck !
dEVS PLS HELLPPP !
you must be on download mode. Click lighting button, select firmware file and turn off your phone. When flashtool says Waiting for flashmode (or else), hold volume down button and connect pc. Flashtool will flash.
hello i have sonyxperia m2
my kid's lock the pattern
usb debuggin is off
no root
i forgot the pass for my mail acount
when connet via usb cable to pc dont found my device
so what can i do????
i tried pc companion or fl;ash tool from sony but nothing
Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
thnks for reply
Dzepar said:
Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4[/QUOT]
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse
sta8man said:
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse
Shouldn't one just need to install PC Companion?
http://support.sonymobile.com/gb/tools/pc-companion/
All USB drivers should be included. Since it seems you have it installed already try to uninstall it (and the USB drivers if they still are there), reboot and install PC Companion again.
Otherwise if you have access to a Mac make it simple and do it from there. No bleeding drivers needed.
As Miche1asso said, PC companion should do the work.
Also install falshmod and fastboot drivers from Flashtool/drivers folder, if you're on Windows 8.1 you need to disable driver signature verification (Google that).
Good Luck
Xperia M2 D2303 on K.K. 4.4.4
Don't worry OP. As you said, your phone's pattern is locked so even if you connect it to the pc it won't be recognised.
1. Install pc companion.
2. Search for the repair option. (Google it)
3. Then select your phone model. Go ahead.
4. Official firmware will be downloaded now.
5. Pc companion will then ask you to connect phone in flashmode by switching off phone and then holding volume down button and connecting to usb cable.
6. Leave it for 20 minutes.
7. Previous data will be gone. Enjoy fresh stock rom.
Don't worry about the drivers. When you connect phone in flashmode, your computer will install s1 boot drivers which will do the work.
---------- Post added at 02:10 AM ---------- Previous post was at 02:04 AM ----------
Flashtools doesn't have drivers for Xperia M2.
Trick to install Xperia M2 drivers.
1. Remove Xperia M2 from devices and printers section. Reboot.
2. Install PC companion.
3. Click how to connect and select usb cable.
4. When PC companion asks to connect phone just connect and leave it.
5. It takes a little time but you can see a window saying installing drivers for Xperia M2.
6. After finishing all of this, you can check in flashtools whether drivers are fully installed or not.
If this helps, use it. ?
thnlks for your time brother and sister no solved
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...
sta8man said:
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...
Click to expand...
Click to collapse
Try with this flashtool:
http://www.flashtool.net/index.php
Try connecting it in flashmode to install drivers (connect phone turned off to PC holding volume down button).
just the same problema
ihave do it but nothing .
download the adb driver installer to find my device but nothing no device founded
i try many times connect phone turned off to PC holding volume down button but cant in to flash mode . thnx for your time
i want suitable *.inf for manual driver install for wxp sp3 32bit
Do you have access to another computer? I'd try to see if it works on that. At least you would rule out the option that the phone USB is burned or something. And in case you didn't do it already, I'd try with a third USB cable.
You're making a mistake my friend.
Why am i sure? Because i did the same thing. Drivers will only be installed by pcc as far as i know. Flashtool doesn't have drivers for M2.
Follow my tutorial exactly the way I've given it.
Start fresh. A new pc running windows 7 will do the work.
thnks my friend but...
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42
sta8man said:
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
Click to expand...
Click to collapse
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42
Click to expand...
Click to collapse
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.
device cant on in flash mode
Miche1asso said:
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.
Click to expand...
Click to collapse
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change
sta8man said:
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change
Click to expand...
Click to collapse
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging
Miche1asso said:
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging
Click to expand...
Click to collapse
i have allready do this bro just flashes on time green led thats all .... i dont know mayde have hardware problem ---->usb connector
It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.
nlooooo said:
It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.
Click to expand...
Click to collapse
flashtool report nothing if connect mobile or not is the same think repot nothing
I went to a technical MOBILE and he cant root my mobile he said that ...
you might have problem usb Connector but im not 100% sure
hello guys, i have a problem with my lenovo A850i.
after flashing, my phone cannot on, i check my battery and its still in good condition, i try to flashing one again using SP flash tool, and now my phone were not detect by pc, the led will light up when i remove the battery when it connect to usb, but when i put back the battery,the light will close. i connect to usb and try mane button combination , but still not work...
i have been stuck with this about 3 day, i hope someone can help me..
Sorry for my broken englosh...
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
northwindtrades said:
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
Click to expand...
Click to collapse
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
jimbo94 said:
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
Click to expand...
Click to collapse
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
northwindtrades said:
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
Click to expand...
Click to collapse
Okay, i will try it first
Guys my m2 stuck in semc flash device..
When i connect with pc..
In device manager it shows semc flash....
No flashmode and fastboot mode when i press volume down and up keys.
Flashtool doesn't detected..
Sony pc companion doesn't detected
Please help me..
I don't knw what to do!!
Connect your phone, go to device manager and uninstall the driver and disconnect your phone,
Now if you're running Windows 8+ restart your PC with driver signature enforcement disabled through advance boot, now go to C:\Flashtool\drivers and open the driver installer and install Flashmode and fastboot drivers and now connect your phone and go to device manager and install the Sony Xperia M2 driver http://developer.sonymobile.com/downloads/drivers/xperia-m2-driver/
Once that's done open your sim/microsd tray and use a pin and click on the red button inside the hole,
Now connect your phone to your PC and tell me what it says in device manager and later open PC companion and see what it detects
Help
What you said i did..
But my phone is detected as semc flash device..
Device doesn't goes to flashmode or fastboot mode...
If i connect my device in another pc which doesn't have any drivers for adb or Xperia m2.
It shows "qhusb bulk" in device manager..
I don't know what it means?
Only red light blinking
...
Can anyone please help. im stuck in a difficult problem. I cant enter recovery, my phone just loops, and i cant connect it to my pc. Just getting USB device not recognized. The last usb device you connected to this computer malfunctioned, and windows does not recognize it. I dont know how to add a new software or restore a backup, and i got a seious battery drain issue. Hope someone can help me. Im on Slim X rom on a E6653.
Download a MM, LP or Nougat firmware.
Let the phone charge and go to flashtool
Load the firmware you downloaded check all the wipe section case and put your phone on flashmode (vol - and stick USB cable while maintaining vol -)
Let flashtool do it's work and once done it should be OK
I have tried that, but my computer cant fin my phone, so i cant use flashtool
I found out of it. Had a faulty usb cord. Im happy again.
Hehe no problem