Database Info

[Q] problema lock patern (my kid's) worng mail usb debugging off

hello i have sonyxperia m2
my kid's lock the pattern
usb debuggin is off
no root
i forgot the pass for my mail acount
when connet via usb cable to pc dont found my device
so what can i do????
i tried pc companion or fl;ash tool from sony but nothing

Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4

thnks for reply
Dzepar said:
Download ftf for your model, flash it with Flashtool. You only need drivers to be installed.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4[/QUOT]
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse

sta8man said:
which drivers for m2 ? did you know? or anyone (m2 drivers|)wxp
Click to expand...
Click to collapse
Shouldn't one just need to install PC Companion?
http://support.sonymobile.com/gb/tools/pc-companion/
All USB drivers should be included. Since it seems you have it installed already try to uninstall it (and the USB drivers if they still are there), reboot and install PC Companion again.
Otherwise if you have access to a Mac make it simple and do it from there. No bleeding drivers needed.

As Miche1asso said, PC companion should do the work.
Also install falshmod and fastboot drivers from Flashtool/drivers folder, if you're on Windows 8.1 you need to disable driver signature verification (Google that).
Good Luck
Xperia M2 D2303 on K.K. 4.4.4

Don't worry OP. As you said, your phone's pattern is locked so even if you connect it to the pc it won't be recognised.
1. Install pc companion.
2. Search for the repair option. (Google it)
3. Then select your phone model. Go ahead.
4. Official firmware will be downloaded now.
5. Pc companion will then ask you to connect phone in flashmode by switching off phone and then holding volume down button and connecting to usb cable.
6. Leave it for 20 minutes.
7. Previous data will be gone. Enjoy fresh stock rom.
Don't worry about the drivers. When you connect phone in flashmode, your computer will install s1 boot drivers which will do the work.
---------- Post added at 02:10 AM ---------- Previous post was at 02:04 AM ----------
Flashtools doesn't have drivers for Xperia M2.
Trick to install Xperia M2 drivers.
1. Remove Xperia M2 from devices and printers section. Reboot.
2. Install PC companion.
3. Click how to connect and select usb cable.
4. When PC companion asks to connect phone just connect and leave it.
5. It takes a little time but you can see a window saying installing drivers for Xperia M2.
6. After finishing all of this, you can check in flashtools whether drivers are fully installed or not.
If this helps, use it. ?

thnlks for your time brother and sister no solved
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...

sta8man said:
ok i tried pc companion and many tools but with no result.
emma flash tool dont operating in wxp but i tried in windows 7 and also still nothing
i tried to manual setup driver but nothing
i change cable or port or everythink else the result =nothing when connect my device in pc companion the msg is dont find any device
i have do install uninstall many many times pc companion and drivers or adb or universal driver but still nothing ACKNOWLEDGE device .wtf? im thinking maybe have a hardware problema? what else can do before get a hammer? or a stone? maybe...
Click to expand...
Click to collapse
Try with this flashtool:
http://www.flashtool.net/index.php
Try connecting it in flashmode to install drivers (connect phone turned off to PC holding volume down button).

just the same problema
ihave do it but nothing .
download the adb driver installer to find my device but nothing no device founded
i try many times connect phone turned off to PC holding volume down button but cant in to flash mode . thnx for your time
i want suitable *.inf for manual driver install for wxp sp3 32bit

Do you have access to another computer? I'd try to see if it works on that. At least you would rule out the option that the phone USB is burned or something. And in case you didn't do it already, I'd try with a third USB cable.

You're making a mistake my friend.
Why am i sure? Because i did the same thing. Drivers will only be installed by pcc as far as i know. Flashtool doesn't have drivers for M2.
Follow my tutorial exactly the way I've given it.
Start fresh. A new pc running windows 7 will do the work.

thnks my friend but...
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42

sta8man said:
I have already done in Laptop with windows step by step your tutorial but nothing just same problema.
i dont have hardware proble with usb port because the battery is charging
Click to expand...
Click to collapse
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
i try original usb cable but nothing change
from pc companion console if this help
21:13:47,97 [CrashDump 14/11/27] DllCanUnloadNow = S_FALSE LockCount = 3
21:13:47,97 [BackupRestore 14/12/09] DllCanUnloadNow = S_FALSE LockCount = 1
21:13:47,97 [PCCompanion 14/12/15] DllCanUnloadNow = S_FALSE LockCount = 42
Click to expand...
Click to collapse
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.

device cant on in flash mode
Miche1asso said:
Technically that doesn't give 100% certainty that the USB is working. if one of the other pins has gone, you can still charge the phone but you may get no communications.
Sorry, not sure how that is supposed help. I mean, it doesn't give out much information.
Still, I know you tried everything, but either you keep doing something wrong or the phone has an HW problem. Did you try to see if Flashtool recognizes the phone while connecting it in flash mode (hold volume down with the phone off while you connect it to the PC via USB)? Maybe you could copy&paste its log after doing it.
Click to expand...
Click to collapse
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change

sta8man said:
1 methodos :mobile cant on in flash mode when i hold -volume or + just restart
2 methodos :i try to hold power button with volume up
vibration 3 times but nothing change
Click to expand...
Click to collapse
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging

Miche1asso said:
I think it restarted on me as well a couple of times holding Volume down, once. That was because I took too long I believe. Try this:
1. Start Flashtool
2 Switch off the phone. Better if pushing the little bottom in the hole near the SIM card (it's faster and it resets it anyway)
3. Have your USB cable ready
4. Hold Volume Down and immediately plug the USB cable keeping holding Volume Down until the small led color changes
5. See what Flashtool is logging
Click to expand...
Click to collapse
i have allready do this bro just flashes on time green led thats all .... i dont know mayde have hardware problem ---->usb connector

It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.

nlooooo said:
It should flash led green just once and then turn it off, the point is to see what flashtool reports, it should say 'Device connected in flashmode' and that's it.
Click to expand...
Click to collapse
flashtool report nothing if connect mobile or not is the same think repot nothing
I went to a technical MOBILE and he cant root my mobile he said that ...
you might have problem usb Connector but im not 100% sure

z3 doesnt work please help me

hello everyone. My English is poor so sorry for this. I have some problem i cant open my phone When working with global rom installation FlashTool , flashtool is said me turn off phone and connect fastboot mode. and im turn off try to connect fastboot mode but didnt work fastboot and im try to hard reset but now i cant open my phone led is doesnt work dont connect pc and hard reset it is not working .

flash latest firmware with flastool in flashmode

manowar41 said:
hello everyone. My English is poor so sorry for this. I have some problem i cant open my phone When working with global rom installation FlashTool , flashtool is said me turn off phone and connect fastboot mode. and im turn off try to connect fastboot mode but didnt work fastboot and im try to hard reset but now i cant open my phone led is doesnt work dont connect pc and hard reset it is not working .
Click to expand...
Click to collapse
Try repairing firmware via PC companion. It might help you.

lenovo a5000 bricked, cant be turned on but detect on pc... help!!

my lenovo a5000 bricked after downgrade to stock kitkat s025 version using sp flashtool... now it cant be turn on... but my pc detect the phone after connecting via usb.. but when I press on button, nothing happen or vibrating... I try to flash back to newer version but sp flashtool doesnt detect the fon... help me!

Lenovo phones are damn fussy it requires to have the exact original FW for it to boot. Try to obtain the build details of the original FW and Google it.
Flash it back as usual and with the right FW it will power-up for sure....Good Luck !

If you flashed a wrong preloader your phone probably is irrecoverable

belalerebus said:
my lenovo a5000 bricked after downgrade to stock kitkat s025 version using sp flashtool... now it cant be turn on... but my pc detect the phone after connecting via usb.. but when I press on button, nothing happen or vibrating... I try to flash back to newer version but sp flashtool doesnt detect the fon... help me!
Click to expand...
Click to collapse
you need to open your phone..disconnect the battery and reconnect again..after that open your flashtool...open scatter file..Lenovo_A5000_S119_150820_8G_ROW_(by_xdafirmware.com)..then click start...connect usb to computer..press and hold volume down (phone) then connect your phone.. that's all........good luck

i experience something in my a5000 kikat it its detected but some errors appears in sp flash tool
i try using fastboot but it doesnt detect by the computer im so hopeless
maybe i flash wrong rom it keeps restarting in black screen

bootloop, no recovery mode, can't connect to pc

Hi,
I have a sony xpera L. It is stuck in a bootloop and i dont have CWM or TWRP. My device doesn't have a recovery mode. I already tried to fix this with Odin or flashtool but my PC doesn't recognize my device. When i try to connect my device to my PC i still hear the sound that it connects. My device isrooted
any solutions?

Are you able to enter the Bootloader/Fastboot?

I am able to start my phone in fastboot, my phone will show a blue light

Arceterix said:
Hi,
I have a sony xpera L. It is stuck in a bootloop and i dont have CWM or TWRP. My device doesn't have a recovery mode. I already tried to fix this with Odin or flashtool but my PC doesn't recognize my device. When i try to connect my device to my PC i still hear the sound that it connects. My device isrooted
any solutions?
Click to expand...
Click to collapse
PC doesn't recognise - Clearly means you don't have driverw for your phone installed.. A simple google search will lead u to them..

I cant install a new driver, my pc is pretty useless now since my phone cant conect to my pc.
thanks for your quick replies sir

Maybe install Ubuntu or another Linux and try again. Had the same Problem with Win8 and HTC of a friend.

Thanks for helping, i fixed my phone by flashing the stock rom. I used Wmshua for flashing. Its easy to use.

Nice to hear that

Lenovo A850i cannot detect by pc after flash

hello guys, i have a problem with my lenovo A850i.
after flashing, my phone cannot on, i check my battery and its still in good condition, i try to flashing one again using SP flash tool, and now my phone were not detect by pc, the led will light up when i remove the battery when it connect to usb, but when i put back the battery,the light will close. i connect to usb and try mane button combination , but still not work...
i have been stuck with this about 3 day, i hope someone can help me..
Sorry for my broken englosh...

What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only

northwindtrades said:
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
Click to expand...
Click to collapse
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery

jimbo94 said:
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
Click to expand...
Click to collapse
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:

northwindtrades said:
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
Click to expand...
Click to collapse
Okay, i will try it first