Database Info

My Dog got a hold of my Fuze...

Anyone know any sources of FUZE/Raphael parts? As you can see from the pix, she chowed down right on the "Send" key. I've found a few disassembly guides, and I'm no stranger to disassembleing HTC phones, but parts are hard to find. Well, other than canibalizing from a broken phone.
Anyone have any ideas?
THANKS!

http://www.omnomnomnom.com/random/

how about ebay?

Any Newer suggestions?

I feel your pain, even sourcing eBay for parts is difficult. I have a problem that the Up volume key on my Fuze is stuck (only really a problem when turning the phone on) but finding parts is difficult.
My screen and buttons are also a little scratched, but again, hard to find parts. I can find some on eBay but its almost an entire phone ($140 for the parts) but does not include the keys on the front.

[Q] Touch unresponsive at #456 on phone

Picked up this phone from CL. The person was claiming that part of the screen is not responding to touch.
I have seen it when I picked it up, but I thought that I will deal with it when I get home.
I was keep playing with the phone almost everything it's working on it except the volume buttons and that horizontal line where the #456 is on the dial pad.
I have removed the battery and noticed that the white sticker it was pink, water damage.
Now I don't know what could be the damage here? There is a shadow across the screen also, but it's not a crack.
I have seen this before on a digital camera, it was the aluminum sheet metal under the LCD, had a smudge across on that aluminum finish too.
Couldn't remove it though. Replaced the screen on the camera and it was as new.
Not sure what could be the problem with the phone?
Should I replace the digitizer, since the LCD shows everything correctly? It could be something shorted internally? I have the phone apart, but I don't see anything wrong. Cleaned all the contact with electronic cleaner, no change.
Any help would be appreciated.

Please post all questions in the Q & A section. Thanks! Thread moved.
Sent from my Galaxy Nexus using Tapatalk 2

I think I would replace the LCD and digitizer as a unit. The slightly higher cost would be easier to accept than having to do it more than once, which would probably end up costing more. Either way is a gamble, though, because that might not be the issue.
Volume buttons are notorious on this phone. I have not known or read about someone fixing them. You can get around the problem for the most part by using software to control the volume, using roms that will restart to recovery or boot loader, and the occasional use of ADB commands, but some bootloop situations require the hardware to work.
Good luck with your project and let us know how it works out.
Not just a pretty Pickle.

I'm thinking of buying the whole LCD as a unit, but that is why I'm asking that maybe somebody could tell me if it's the LCD or other hardware.
The volume button it's together with the upper camera board and I guess it has to be replaced together.

digitizer or LCD screen.

So my photon Q is rather old. Shocking I'm sure. Recently the screen has started behaving very oddly. Flickers, sensitivity is weird, blacks out etc..
I thought perhaps flex ribbon due to keyboard sliding and closing but now I think may be digitizer or the lcd. I"m leaning towards digitizer becasue when it does work it looks perfectly clear. But there will be the one time i push the power to check if I have anything and nothing happens. Reset it and can see the screen wants to do something but can't decide what. Reset over and over and eventually boots up fine.
Digitizer?
Thanks for any info.

Anybody able to chime in

Flickering screen can't have anything to do with the digitizer. The digitizer is just there for input.
It could be that the connector is a bit loose on the mainboard. The way the Photon is designed I wouldn't think it's the ribbon. I could be, but very unlikely. Anyway it's worth looking into the connectors and just to be sure the ribbon as well. But that would take a full dismantle. The connector is just 5 minutes work.
Next time try booting into recovery. If that goes well (and regular boot not) i'm pretty sure it's a hardware problem (GPU).

Die Bruine said:
Flickering screen can't have anything to do with the digitizer. The digitizer is just there for input.
It could be that the connector is a bit loose on the mainboard. The way the Photon is designed I wouldn't think it's the ribbon. I could be, but very unlikely. Anyway it's worth looking into the connectors and just to be sure the ribbon as well. But that would take a full dismantle. The connector is just 5 minutes work.
Next time try booting into recovery. If that goes well (and regular boot not) i'm pretty sure it's a hardware problem (GPU).
Click to expand...
Click to collapse
When boot in any mode Ican't see anything.. A fading circle of grey lines runs vertically down the front. Sometimes after many reboots it fixes itself though. Good to know not digitizer. So take apart and check ribbon and maybe replace LCD likely?

I wonder if it is possible to simply replace the LCD if it's defective or if you have to replace the whole LCD-digitizer-speaker-etc set (which is expensive).

Loader009 said:
I wonder if it is possible to simply replace the LCD if it's defective or if you have to replace the whole LCD-digitizer-speaker-etc set (which is expensive).
Click to expand...
Click to collapse
I ordered a replacement lcd screen so will find out. I also ordered the digitizer and flex cable.

So i'm thinking it may be more hardware involved than screen inolved. When it does work everything is usable and it works fine. This is only about 10% of the time at this point. Otherwise it boots up to show some vertical lines traveling down the middle of the screen but only in a circle in the middle of the screen that fades as it gets close to the edges. I'll try taking apart tomorrow night to see if ribbon and what not looks ok. But so far i've invested about $70 into parts and i'm thinkin about just snagging an S5 for $100. I will miss the keyboard though although I can hope that like the s3 and s4, the s5 will get a keyboard attachment. Thoughts?

If I remember correctly the LCD comes with the ribbon and camera connected. The digitizer is connected via a ribbon to a board in the top of the front panel. You could try to disable the pin. When the phone doesn't seem to work, reboot and try calling yourself. If it rings, there's something wrong with the screen and not the phone.
If there was something seriously wrong with the phone, it wouldn't boot. But that's just me guessing/assuming.
My daughter's Photon has had a digitzer replacement twice. And it looks like it's been used to play football. But that one still rocks. No quirks or any strange behavior for that matter.
What I'm trying to say is that the Photon is a decent piece of hardware. A family of four, we all have a Photon. Three of which have had their digitizer replaced and one an LCD (scratched it when replacing digitizer).
I swapped my Razr HD for an Z2. It was time for a new corporate phone. So that, and the camera, is the reason why I went for a Z2. My options were 930/G3/S5/Z2. S5 is not my cup of tea. The G3 has no ruggedness whatsoever. The 930, apart from WP maybe I should have went for it.
So it came down to the Z2. To be honest I'm looking to trade it when the Z3 compact arrives. We'll see.
@Loader009
Digitizer is a part, board for speaker is a part, the speaker itself is a part (adhesive, watch out, btw 100% the same as Droid4), and the LCD is a part on it's own.

Going to open up my phone tonight after work. I was bored and was just playing with the keyboard sliding it open and closed a bunch and now the screen looks perfectly clear.. although sometimes it will still black out and I have to reboot it a few times to get it back. I feel its more a connection inside like you stated earlier. I love my Photon and really don't want to have to get a non slider phone. New phone's are so friggin huge lol.

The good thing is, the PQ has gotten pretty cheap, so you might want to get a used one at ebay if the part to replace is too expensive.

flickering screen (backlight) is not lcd problem.
for 70% is it problem on mainboard - backlight ic. This problem is caused by using unoriginal charger.
and 30% flex problem

I had my screen become un-responsive etc, it was due to a crack in the ribbon. Swapped it out & all ok.
Easier to swap the whole screen assy than to change the ribbon, but depends on what spares you have/can get.
You'd need to have a good look at the ribbon for any damage.
Sent from my SIM-modded Photon Q

[Q] How is this part called

Hi!
I noticed my earpiece is not working at all and decided to disassembly my Relay. It was a shock for me, when I saw, that the part marked on red here: http://i.epvpimg.com/A6xZd.jpg
looks like that in my phone:
http://i.epvpimg.com/uTXBg.jpg
http://i.epvpimg.com/xlpvg.jpg
http://i.epvpimg.com/b4aWf.jpg
http://i.epvpimg.com/65U5d.jpg
(I am even wondering how is my phone working now...).
Could somebody give me a name of this part? And can it be a reason for not working earpiece, or should I disassembly my Relay "deeper"?
I found this: https://www.gounlock.com/details.php?itemId=8555
I was looking only on the length of this cable, so I'm still not sure if it's what I'm searching for.

That would be the main flex cable
http://forum.xda-developers.com/showthread.php?t=2206523
Be sure to thank jax184

demkantor said:
That would be the main flex cable
http://forum.xda-developers.com/showthread.php?t=2206523
Be sure to thank jax184
Click to expand...
Click to collapse
Thank you for your answer demkantor.
The second post which I didn't read before helped me mostly: http://forum.xda-developers.com/showpost.php?p=39598833&postcount=2
Could you confirm if the part I put with a link in 1st post is what am I searching for? I couldn't find anything for "main flex cable" in Google and also I don't think it's the same part.
And is it possible to change it without replacing the whole screen-part of the phone? The disassembly manual ended with same step I did.

Unfortunately I can't say for sure as I haven't yet torn this phone apart myself
I would recommend to pull out the broken cable and try to match it physically to the one you linked
Otherwise search out a thread that someone here has done this and ask if they can confirm
Best of luck!

When I had to replace a broken screen on my Relay, the replacment screen came with that cable, screen, digitizer and top case. If there are any more still being sold elsewhere, it might be easier to replace then entire top half of the phone. I had cost me $40 about a year ago, unfortunaglly I can't find it again listed on ebay. Good luck

Screen damaged what should i do

My sister just broke her moto x pure.
The display works, however the digitizer do not works correctly. Cannot post pictures because the wallpaper is containing private information and i cannot change it.
She cannot use the entire screen.
For example on the lockscreen, she cannot use the 8. And the other digits works very badly. So she cannot unlock her phone.
What should I replace (screen, digitizer...) and where should I find the replacement part ?
Thank for your help

You'll need to replace both the digitizer + display as they come together. If you are good at repairing phones, you can get the display from eBay or else send your phone to service center if you don't. I would suggest you to send it to the service center.

You could use a USB OTG cable to connect a mouse and thus regain control of the device in order to clear any sensitive information prior to having someone fix it. I have bought and fixed several Moto X pure edition phones with cracked screens for family members. Most of them did alright, but one phone had the screen replaced, then a cow stepped on it. Although it didn't crack, after a while parts of the screen stopped responding to touch. The screen I replaced it with has not been damaged at all, but parts of it have stopped responding to touch as well. Sometimes I wonder if these phones don't have a particularly weak and easily damaged screen. I sometimes get my replacement screens from GadgetFix. If you fix it yourself make absolutely sure that you get a screen+frame assembly. It's just a few dollars more, and totally worth it. And be careful when you transfer the speaker grill trim to the new screen that you don't press hard enough to crack the screen.

Thanks you, I think I will change the screen and the frame.
https://m.ebay.com/itm/For-Motorola...%3A7550533015e0a9cbd9f98f63fff20079%7Ciid%3A2
Is this what I should buy ?

The screen that you posted does not include the frame. I briefly looked on eBay; you might find one with the frame included for a few dollars less than gadget fix, but for simplicity I just linked this one. On the back side of the display you will notice the screw inserts. That is what you need to look for.
https://gadgetfix.com/motorola-moto...screen-touch-screen-digitizer-frame-7447.html

zstricky said:
The screen that you posted does not include the frame. I briefly looked on eBay; you might find one with the frame included for a few dollars less than gadget fix, but for simplicity I just linked this one. On the back side of the display you will notice the screw inserts. That is what you need to look for.
https://gadgetfix.com/motorola-moto...screen-touch-screen-digitizer-frame-7447.html
Click to expand...
Click to collapse
Thanks !
Could you point me to a tutorial or a video explaining how to change the screen

I believe that Ifixit has a whole teardown tutorial for this phone. If not just search YouTube for (phone model) screen replacement, watch it a time or two, and then pause it while you do each individual step. If the first video you watch doesn't explain things in an understandable manner just watch another one. It's been a while since I searched for one, but I think there are at least a few good ones.