Database Info

Cracked Screen on my Touch Pro

I dropped my touch pro and cracked the screen in a few places. I think it works normally except for the screen, as it receives calls fine...
A new phone isn't in my budget right now. Does anyone know of a good place (hopefully in DC, MD or VA) that will supply or install a replacement touch screen?
(btw, no recent threads came up when I searched.)

Ebay!
Just looked, $30 including postage for a screen & digitiser if you are able to do it yourself.

How hard is it to replace a screen if it has surface damage? Is there anywhere i could find a walkthrough or help?

Shame man, its a tragedy of what happened to your phone...
Luckily its not too bad, and you may just be able to fix it. You can download the service manual for the phone here: http://htcwinmobile.blogspot.com/2009/03/htc-raphaeltouch-pro-service-manual.html
Just a note though, make sure you DO USE tweezers or something to get the speaker wires out of the way before snapping the enclosure back into position... I had to reopen the phone again, after powering it, to rejoin one of the little wires thats like a tenth of a millimeter thick DO NOT IGNORE ANYTHING THEY TELL YOU IN THE MANUAL. Oh, and what works well for the "plastic removal tool" is a cut out piece of plastic ice cream container. AGIAN, do not ignore anything in there... You are voiding the warranty permanently when you do it yourself (which you unfortunately have to).
Anyways, good luck!

I drop my phone also, but the screen didn't actually cracked! but I do have is problems with the screen in other ways! Sometimes I get a black screen when I turn on the phone and sometimes not, but when the screen turns on, it flickers a lot and have lines thru it. What suprises me is that sometimes I get perfect images on the screen (Which makes me think that the screen it's not damaged).
Any suggestion would be apreciated. Thanks!

3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!

a.mendoza said:
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
Click to expand...
Click to collapse
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.

maxh said:
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
Click to expand...
Click to collapse
Thanks for the advice! I was thinking on that also and wanted to take my chances opening the phone (oh god!).
BTW, I saw the $30 LCD Screen+Digitizer combo on ebay that Beeble referred to, but I'm not sure if it fits on the fuze (my model). What have come to my mind it's to buy also the front camera of the phone (like a thread on the kaiser) to mod the cell, in case I need to buy the screen+digitizer. I've search all threads about this issue but nobody has done it because it was too expensive for the result; I believe with this price it's worth it right now!

solved
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
I used Diamod (!) LCD and Touch Pro digitiser. Works perfect.
Much more cheaper

If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050

-G-Rey--- said:
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
Click to expand...
Click to collapse
WOW! What a long way to get to the screen. Good luck for everyone who tries to dismount and mount the Raphael.

maxh said:
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
Click to expand...
Click to collapse
Thanks for the advise maxh,
I just wanted to let you know that a miracle just happened! my cellphone started to work just fine without even opening the phone! it has more than a week on this situation so I believe that it's exactly what you stated (the LCD conector became unseated or loose). Since it's still working, I have no need to open it! so I'll just wait until it becomes defective again and at that point just open it and tight up the LCD connector!
Anyway, I would love if somebody could make the mod that I was refereing to before (changing the screen of the fuze by the touch pro one) and see if it's possible to attach the front camera on the fuze.
Once again, thanks everybody for your opinions.

I got my new display+ digitizer on Ebay (65$) and replaced it, using the russian link mentioned above ( follow the exact procedure) , it took me 2 hours to do it, and after lot of patience it worked! My problem was the digitizer never worked fine, and after replaced it it worked like never before. If You are not familiar with repairs, it will be a mistake and waste of money to buy a display without digitizer. NOW, I have a small problem, my display has a NEW color, it's like color temp is WARM for this display, and COLD for my old display, AND COLOR level is lower, and the result is display without vivid colors, black like gray. Is there any way to change the DISPLAY color settings?

[Q] SGS GT-i9000 ... list and reference of electronic parts

Dears folks,
I'm in search of a list of the references of the electronic components/parts of the Samsung Galaxy S GT-i9000.
In particular the reference of the main speaker (see pics attached) part since I've broken this part while replacing my broken LCD screen/digitizer.
I failed to find any OEM/electronic parts suppliers selling this.
Any idea ?
Thanks beforehand.

The SEC part number for QSP01 speaker module is GH59-09408A.
It will cost you around 25-30€ I recon.

Would anyone happen to know where to get a gps antenna? Its the sticker-type just beside the speaker.
I can make a small donation for whomever finds a such antenna.
Sent from my GT-I9000 using XDA App

rkantos said:
Would anyone happen to know where to get a gps antenna? Its the sticker-type just beside the speaker.
I can make a small donation for whomever finds a such antenna.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
The antenna assy is not sold separately.
You need to buy the whole middle frame.
Price is about 25 euros.

Richthofen said:
The antenna assy is not sold separately.
You need to buy the whole middle frame.
Price is about 25 euros.
Click to expand...
Click to collapse
Well, where can I get the middle frame?

@ Richthofen
Thank you. Huh same question as "rkantos", any idea where to buy GH59-09408A online ? Failed to find it on eBay.

you might try these folks http://www.globaldirectparts.com/
they're in Texas, USA

Thanks Larryccf. Unfortunatly, not in their catalogue.
I'll have a look straight to korean "suppliers" ...

Okay, I did some further investigation and found out that this "rear speaker" is manufactured by a Korean company named Bluecom.
The reference of this "speaker module" is HQS151135P ... which is to be found inside the plastic ****.
Hope this help for future "unlucky" like me when disassemblying the SGS.

Hi everybody,
I'm looking for a website where I can buy a special spare parts for my galaxy s!
This part is the mic, the physical button and the two touch buttons.
All this components stay in the same part
If you know what's the reference number of this part or where I can buy it, you may give me this.
thanks boys.
Jika

jawad_449 said:
Hi everybody,
I'm looking for a website where I can buy a special spare parts for my galaxy s!
This part the mic, the physical button and the two touch buttons.
All this components stay in the same part
If you know what's the reference number of this part, you may give me this.
thanks boys.
Jika
Click to expand...
Click to collapse
For the 2 touch buttons ... lookout on eBay with the following keywords (I cannot give the direct link since I'm limited in my profile account here) :
"Flex Cable Keypad for Samsung Galaxy S i9000 wTracking"
... quite not sure it includes the mic and the "plastic" button at the bottom of the phone, tough.

Thanks itdoe. I'm just looking at this and there's the mic, that's exactely what I'm looking for! That's maybe the solution for my physical button which lost his sensitivity and the two touch button which doesn't work ...
But I have one more question :
Do you know where I can find the wire connecting this part and the mothercard? (like in the pics).
That's a standard cable or that's a spacial Samsung cable?
Someone know what's it utility?
I ask you that because I disconnect this cable and everything works in my phone only the two touch key.

After some investigations, I found what's this wire. That's the network cable which work like your hearset for the radio in your Galaxy S. That's in fact an antenna! (maybe for bluetooth too, but I'm not sure for that!)
If that can help someone

Anyone have info on the part number for the front facing camera?

TheBrandonWRX said:
Anyone have info on the part number for the front facing camera?
Click to expand...
Click to collapse
The front facing camera is in the same module with the main camera.
The part number for this assy is GH59-09400A.
The price is around 40-50 euros I recon.

Hello,
i need the spare part: microphon/antenna
Do you know also the part number and where i can find it?
Thanks for help.
gb16928

gb16928 said:
Hello,
i need the spare part: microphon/antenna
Do you know also the part number and where i can find it?
Thanks for help.
gb16928
Click to expand...
Click to collapse
The microphon and antenna stay on button flex cable ...
You can find it on Ebay (search : "GENUINE SAMSUNG KEYPAD FLEX RIBBON CABLE FOR I9000" )

I think I've the one million dollar question ...
I wondered if someone know where I can find the power flex cable welded on the mothercard to remplace my cutted flex cable ... (or eventually this reference).
If you havn't any information about this one, do you think it's possible to use an other flex cable model?
thank you for your answers...

To bad there is no answer to the real flex cable or the middle part. By my own stupidness i destroid the flex cable. I think I must buy a new SGS then all my holiday pictures and videos are in the broken phone. So the new Samsung Pad must wait...

Thanks, my i9000 is ok now

grainy screen

Code:
http://img41.imageshack.us/img41/760/sdc10159i.jpg
http://img16.imageshack.us/img16/3918/sdc10158x.jp
Look above pictures please.
I sold a phone on ebay ( phone was about new) and buyer said phone isn't working so ebay told me to do a refund and get the phone back. Phone came back like seen in the picture.
Any ideas on how to fix this? Can it be that somethink got out of place during shipping?
EDIT:
Update info:
I removed battery cover and battery, squeezed gently all over the phone, put it back and phone started normally, after first reboot it became grainy again.
Can it be that something got unplugged?
I have no warranty on this phone, so to open it further will not void any warranty, can anyone point me what should I look for?
Awaiting any comments,
Thanks

help
Any one to pass an idea here?

Solution
Well, I managed to fix this phone and thought to come and share what I did.
First I kinda narrowed down the problem to lcd or main pcb board.
As I have two htc sensations 4g (t-mobile usa) Ithought I will open both and try main pcb board from bad phone on good one.
Problem was on main pcb board as it did the same grain display with it on good phone.
After I put together phone which originaly worked fine I examined this bad pcb board and everything seemed fine to naked eye.
I connected all cables and flex cables and before putting back cover with 6 screws I tried it once more and its was same grain picture.
Then I gently pushed over video flex cable connector and phone was all fine. I removed the battery (which at this point I was holding in place with my hand) and used a piece of wood to push that flex cable connector some more as it seems that was one part which was doing all this.
Seems that from fall this socket (connector) moved out of its place.
In case you need to do this or anything inside your phone I sugest you watch this youtube video:
Code:
http://youtu.be/go8l4XeiGM0
I didnt understand much of what the guy was talking but video quality explained it all.
I hope no one need to go through this, but if you do then my experience with it might help you.
Check picture of connector in question:

Bake it
I had the exact issue and after I tried everything and was ready to order one from ebay I put it in the oven for 6-7minutes at 360 degree.
Its working perfectly for last 2 months now with no issue.
NOTE:
Please do this as last option as I did.

Need LCD part number!

Hi everyone
I broke the screen on my tablet over a year ago, had the screen replaced with a new one but when i got it back the touch didnt work. The guy seemed like he was sorry about it so he only ended up charging me 30 bucks and said something else is wrong. i was skeptical about it cause with the cracked screen the top corner still responded to touch and now nothing works
...long story short i did some research and saw that theres a few different types of screens for the 300 i figured they may have put the wrong one on so i removed the back to check the version number (it is written on the cable that goes from the glass to the tablet).
However. On my tablet there is no cable at all... i guess i got screwed by the place they put a defective screen or something... Either way of course the touch isnt working the cable isnt even there...
all i need to know is if theres another way to find the version number for the lcd they are pretty cheap online im just going to take a stab at fixing this myself..
ive asked asus that was a waste of time they advised me to send it in they would fix it for 250...ya right

schkeet said:
Hi everyone
I broke the screen on my tablet over a year ago, had the screen replaced with a new one but when i got it back the touch didnt work. The guy seemed like he was sorry about it so he only ended up charging me 30 bucks and said something else is wrong. i was skeptical about it cause with the cracked screen the top corner still responded to touch and now nothing works
...long story short i did some research and saw that theres a few different types of screens for the 300 i figured they may have put the wrong one on so i removed the back to check the version number (it is written on the cable that goes from the glass to the tablet).
However. On my tablet there is no cable at all... i guess i got screwed by the place they put a defective screen or something... Either way of course the touch isnt working the cable isnt even there...
all i need to know is if theres another way to find the version number for the lcd they are pretty cheap online im just going to take a stab at fixing this myself..
ive asked asus that was a waste of time they advised me to send it in they would fix it for 250...ya right
Click to expand...
Click to collapse
Do you still need help with this? If you do, open the tab, take all necessary precautions with the battery, remove all boards and cables, and look where the digitizer's ribbons should be. If they're not there, it means they've been ripped when the "repairman" reassembled the thing. If the lcd still works, all you need is a new digitizer. A G01 would work across the board and is cheap. Go to this thread for more info. Good luck.

Thank you I had given up for a while but just wiped the dust off this thing yesterday...I'll give it a try
Sent from my Nexus 5 using XDA Free mobile app

[Q] Cracked my Screen! Looking for replacement

Hey guys my screen has been broken brutally.. My younger brother just threw it away!
So the touch doesnt work now but i guess everything else is fine. The volume and power buttons work fine. But the tough or the capactive buttons dont respond.
From what i have researched since the touch and the lcd are glued both will have to be replaced together. So i researched and found an estimate of 65$ for a new digitizer + LCD. Now the problem is even if i order the tough and lcd i dont know how to fix it. I saw the ifixit teardown but dont really understand much since there are no detailed steps in it.
I am not going to repair it myself, will repair it from a local repairer but i am pretty sure around here people dont even know what this phone is, so i dont wanna risk directly handing over it to them. If anyone of you all could guide me with a step by step procedure it would be a greattt help! Please help me guys want a good solution for this precious phone!
P.S i dont wanna send it to Oneplus since only the shipping would cost me around 100$ and 100$ more for the screen replacement.
and please dont advice about how i should have taken better care! I had applied a nilkin tempered glass protector but since it hit the wall at the sides it dint really help!
I should have had a case! </3 i was on my way to buy one
Step 1: Open The Back cover
Step 2. Remove the screws
Step 3: ...... please guide me about how to proceed with detaching the screen.
i would b glad to share one of my sharable invites with you if you help me with it or a video would be just paradise! :good:

I
Where do you found LCD + digitizer for only 65$??
The less expansive i've found is on ali and it's around 125$...
I'm interested too as i broke my oneplus as you did... Except it wasn't my little brother who thrown it away, it was only me letting it down to the floor...
I think, about the procedure shown in ifixit, it is doable fixing the broken screen... It just seems to ask proper tools ans patience... And a heat gun... (Or hair dryer!!)

Procedure?
sosa106 said:
I
Where do you found LCD + digitizer for only 65$??
The less expansive i've found is on ali and it's around 125$...
I'm interested too as i broke my oneplus as you did... Except it wasn't my little brother who thrown it away, it was only me letting it down to the floor...
I think, about the procedure shown in ifixit, it is doable fixing the broken screen... It just seems to ask proper tools ans patience... And a heat gun... (Or hair dryer!!)
Click to expand...
Click to collapse
ifixit doesnt show any procedure.. m pretty sure you dont need to go through the first 19 steps before you an finally dettach the screen. As far as i know most of the steps mentioned in the middle are not required. So i want someone to assist me with the required steps.
heat gun? i dont think its needed that would be needed if the digitzer and lcd were seprate. Since thats not the case it should be even easier. Oh yes we need the right tools but i guess a local repairer would have them anyway. i would just want the procedure so i could guide him since he wont know about the procedure, about this specific device
I got the 65$ one from ali express too,
go to the site and search for oneplus one digitizer. There are a list of options. Cant post links!

amitshah261 said:
ifixit doesnt show any procedure.. m pretty sure you dont need to go through the first 19 steps before you an finally dettach the screen. As far as i know most of the steps mentioned in the middle are not required. So i want someone to assist me with the required steps.
heat gun? i dont think its needed that would be needed if the digitzer and lcd were seprate. Since thats not the case it should be even easier. Oh yes we need the right tools but i guess a local repairer would have them anyway. i would just want the procedure so i could guide him since he wont know about the procedure, about this specific device
I got the 65$ one from ali express too,
go to the site and search for oneplus one digitizer. There are a list of options. Cant post links!
Click to expand...
Click to collapse
I don't think that you will find someone who can help you. You will need detailed instructions and images, and I don't think anyone has documented a thorough disassembly yet. You can check on YouTube, it's been a while since I've checked myself. I did disassemble one of my OnePlus One's a few weeks ago because the motor was malfunctioning, but instead of trying to fix it I simply returned it for a refund.

I just need to know how is the screen attached
rickyx32 said:
I don't think that you will find someone who can help you. You will need detailed instructions and images, and I don't think anyone has documented a thorough disassembly yet. You can check on YouTube, it's been a while since I've checked myself. I did disassemble one of my OnePlus One's a few weeks ago because the motor was malfunctioning, but instead of trying to fix it I simply returned it for a refund.
Click to expand...
Click to collapse
i dont wanna know all the steps. I just wanna know how is the screen attached. I think it should over all be pretty standard for all phones. So should not be much stress for a local repairer. And from what i have read when the digitizer + lcd are glued it is a very easy job to replace them together. I just want to be sure from my side that say the screen needs to be attached the same way that a Galaxy S2 display is attached to the phone. Then i can just ask the repairer if he would have known how to repair a GSII.
I really cant ship it back to OPO its gonna be almost as much expensive as buying a new One!

amitshah261 said:
i dont wanna know all the steps. I just wanna know how is the screen attached. I think it should over all be pretty standard for all phones. So should not be much stress for a local repairer. And from what i have read when the digitizer + lcd are glued it is a very easy job to replace them together. I just want to be sure from my side that say the screen needs to be attached the same way that a Galaxy S2 display is attached to the phone. Then i can just ask the repairer if he would have known how to repair a GSII.
I really cant ship it back to OPO its gonna be almost as much expensive as buying a new One!
Click to expand...
Click to collapse
Did you only buy the digitizer? You should have bought the screen and digitizer that are already fused. It is absurdly difficult to take off only digitizer and broken glass cleanly. Believe me, I've been repairing things all my life and this is one of the hardest things to fix.

rickyx32 said:
Did you only buy the digitizer? You should have bought the screen and digitizer that are already fused. It is absurdly difficult to take off only digitizer and broken glass cleanly. Believe me, I've been repairing things all my life and this is one of the hardest things to fix.
Click to expand...
Click to collapse
I haven't bought it yet. But dont worry i will b buying the digitizer and the LCD that are already fused together.
But even attaching to the phone is also kind of a challenge right?

guys,
Anyone please suggest regarding how durable and trustworthy are these digitizer +lcd combo that are available on ebay.in?
Can i purchase them? I broke the screen badly and waiting for a replacement. Found a replacement on ebay.in for apprx 100$. Thats fine with me but need suggestions from users who already tried using these screens...? can i go ahead and get it done from a repair shop?