Hello everyone. So here's my problem, i was flashing the android marshmallow rom that was just ported over to our lovely phone. I got it to work, it booted, ran smooth the only problem was i had no service at all. i still have my baseloader and imei but my service state says radio off. i did do a backup of my efs before i flashed marshmallow but it didnt work. i just reflashed it to Oxygen os and it still says radio off. ive tired flashing modems but i dont exactly know which one to flash. ive tried flashing other roms but to no avail. i really need my phone so any help would be greatly appreciated
Did you try moving to older versions of the OS.
Try doing following
1. Install any Android 5.1.1 firmware. This should restore the Radio
2. Install any suitable radio/modem explicitly
Let us know if it helps. Best of luck dude
vermabhanu said:
Did you try moving to older versions of the OS.
Try doing following
1. Install any Android 5.1.1 firmware. This should restore the Radio
2. Install any suitable radio/modem explicitly
Let us know if it helps. Best of luck dude
Click to expand...
Click to collapse
I have to fresh install the ROM on my OPO because I got it bricked so I followed this guide now my radio still doesn't work and the phone is constantly rebooting. The issues came out just like @agentxur did
Considering that you still have your baseband and IMEI (You're Lucky ), you can just flash 44S Modem via Fastboot or full CM12.1 Firmware. I will leave out a link for 44S Modem down.
44S Modem: https://www.androidfilehost.com/?fid=95784891001607675
PS: Flash it through FASTBOOT only!!! Else won't work
I hope the method pointed out by Sanjiv Kumar helped you. Whatever your feedback let the members know.
Sanjiv Kumar said:
Considering that you still have your baseband and IMEI (You're Lucky ), you can just flash 44S Modem via Fastboot or full CM12.1 Firmware. I will leave out a link for 44S Modem down.
PS: Flash it through FASTBOOT only!!! Else won't work
Click to expand...
Click to collapse
I just recently installed Linux on my laptop so I don't have fastboot right now but I actually read somewhere that twrp 2.8.7.0 (which I was using with multirom) won't flash modems or radios correctly so I reflashed 2.8.6.0 with rasher app and it worked. Thanks tho
Related
So here I am worrying about bricking my device if I go back to stock.
Here is some insight-
I have an unlocked XT1032 US retail moto g running Cyanogenmod 11 m4 snapshot. I am also running clockworkmod recovery and everything is working fine. I have heard of many people bricking their devices when they try and flash stock because the version doesnt match up with the bootloader version or something like that. My bootloader version is reported to be 4111.5 (The bootloader menu version is 41.11) from the "fastboot getvar all". So if I want to flash stock firmware what version do I need to choose. (can someone give me a link to the download?) Also is there any easier way to do this, perhaps can someone give me a clockworkmod backup of stock firmware and i can flash it via restore in the recovery. Also is there a way to get .img files of my whole phone via the dd command on the superuser shell. (Someone please give me a list of those commands to make a full image of my phone) so I can restore incase something goes wrong.
So pretty much all in all can someone please give me a link to the correct stock firmware for my phone that I can flash with NO issues and a list of commands that I can use to flash.
And just wondering what is mfastboot and how is it different from fastboot.
I should have made a backup with cwm recovery before I installed cm11 but I forgot which is why I made this thread. ALL HELP IS APPRECIATED! THANKS!
hey try downloading stock firmware from this link http://sbf.droid-developers.org/download.php?device=14&file=786
then follow instruction from this thread http://forum.xda-developers.com/showthread.php?t=2542219
if you failed once don't panic... just try another firmware from here http://sbf.droid-developers.org/phone.php?device=14
just make sure you choose firmware which is for retail US and also choose right version of android... but first try the firmware i have mentioned above...
skyguy126 said:
So here I am worrying about bricking my device if I go back to stock.
Here is some insight-
I have an unlocked XT1032 US retail moto g running Cyanogenmod 11 m4 snapshot. I am also running clockworkmod recovery and everything is working fine. I have heard of many people bricking their devices when they try and flash stock because the version doesnt match up with the bootloader version or something like that. My bootloader version is reported to be 4111.5 (The bootloader menu version is 41.11) from the "fastboot getvar all". So if I want to flash stock firmware what version do I need to choose. (can someone give me a link to the download?) Also is there any easier way to do this, perhaps can someone give me a clockworkmod backup of stock firmware and i can flash it via restore in the recovery. Also is there a way to get .img files of my whole phone via the dd command on the superuser shell. (Someone please give me a list of those commands to make a full image of my phone) so I can restore incase something goes wrong.
So pretty much all in all can someone please give me a link to the correct stock firmware for my phone that I can flash with NO issues and a list of commands that I can use to flash.
And just wondering what is mfastboot and how is it different from fastboot.
I should have made a backup with cwm recovery before I installed cm11 but I forgot which is why I made this thread. ALL HELP IS APPRECIATED! THANKS!
Click to expand...
Click to collapse
XdroidBD said:
hey try downloading stock firmware from this link http://sbf.droid-developers.org/download.php?device=14&file=786
then follow instruction from this thread http://forum.xda-developers.com/showthread.php?t=2542219
if you failed once don't panic... just try another firmware from here http://sbf.droid-developers.org/phone.php?device=14
just make sure you choose firmware which is for retail US and also choose right version of android... but first try the firmware i have mentioned above...
Click to expand...
Click to collapse
Yes what this guy says will work
Almost hard bricked my phone
Tomsgt said:
Yes what this guy says will work
Click to expand...
Click to collapse
during flash gpt.bin it said preflash valadition failed and on the bootloader screen it said partition table downgraded. Used CWM backup to restore and my phone is functioning again but I am still not stock. Please tell me what I am doing wrong? I have attached a screenshot of the command prompt screen.
Q30: i encounter '(bootloader) Preflash validation failed' error message when flashing Firmware Image
You may have updated to Android 4.4.4 via firmware image or OTA update. In this case you now also have the latest version of the Bootloader. That is why you get the above output when attempting to flash a 4.4.2 firmware image. ==> simply flash 4.4.4 images instead.
If the error still occurs, even with a 4.4.4 firmware image, then unlocking bootloader will be necessary.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2537119
There is no 4.4.4 Retail US yet. You can flash 4.4.4 Retail EU just fine. Recovery flashable zip here:
http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688
I have the retail us version though. She. Will the retail us 4.4.4 be available? And one important question when I do go back to stock 4.4.4 with the link you gave me via recovery, will my custom recovery get overwritten with the stock one?
XT1032 is a Global GSM model. you can flash an XT1032 ROM from anywhere in the world and it will work.
It's currently unknown when 4.4.4 US Retail will be available, but I do not think it will take too much longer.
Those zip files only include ROM and Kernel. Recovery will not be changed.
I'll be trying that tomorrow and I'll let you know if it works or not asap. But for now thanks!
You might also need to flash the 4.4.4 EU Retail radio zip available here:
http://forum.xda-developers.com/showthread.php?t=2649763
I read somewhere that when you flash stock ROM even though the recovery is not being changed, the stock ROM will overwrite the custom recovery in start up.
Is this true?
skyguy126 said:
I read somewhere that when you flash stock ROM even though the recovery is not being changed, the stock ROM will overwrite the custom recovery in start up.
Is this true?
Click to expand...
Click to collapse
Please help my phone is stuck in CWM recovery during the flash and I think the recovery is frozen. Can I hard reboot back to recovery or is my phone totaled? :crying:
This worked for me - http://forum.xda-developers.com/mot...-gpe-4-4-4-t2824377/post55768571#post55768571. Once back to 'base' you can update to 4.4.4 OTA or flash another ROM. And if you get stuck again, re-run this process. Three downloads, a few scripts to run; double-click easy.
Good luck.
Back at stock, just had to give CWM 10mins! Thanks everyone!
Hi all
I have a verizon one m8 which runs stock 4.4.2 it is rooted, s-offed by sunshine and has TWRP recovery.
The LTE bands are open but when there is an available LTE network there are some network problems and many disconnections occur. (mainly when entering the LTE area)
I tried some various fixes but nothing worked so I want to update to a customized lollipop firmware.
I did search a -lot but didn't find what are the steps to update.
Can anyone guide or direct me please?
Huge Thanks
Parnuk
If you are just looking to update the firmware here is a link for you. If I were you I would consider a newer ROM to go along with the new firmware.
http://forum.xda-developers.com/showthread.php?t=2723159
thanks!
Some more questions please :
Can my current Rom run with this newer firmware?
Will it still be rooted?
What are the chances to get bricked
To get a newer Rom, should I wipe and then install it from twrp after the firmware update?
last one: this all has nothing to do with the recovery, right?
Sorry for the nooobity, it's all so different comparing to my old SGS
parnuk said:
thanks!
Some more questions please :
Can my current Rom run with this newer firmware? YES
Will it still be rooted? YES
What are the chances to get bricked slim to none
To get a newer Rom, should I wipe and then install it from twrp after the firmware update?Yes a full wipe but do the firmware upgrade first
last one: this all has nothing to do with the recovery, right? You need the latest recovery TWRP preferred
Sorry for the nooobity, it's all so different comparing to my old SGS
Click to expand...
Click to collapse
Also, hit the link in my signature for more details.
Great, the latest twrp didn't work on my current firmware.
I have an older one, can I update it after the rom?
parnuk said:
Great, the latest twrp didn't work on my current firmware.
I have an older one, can I update it after the rom?
Click to expand...
Click to collapse
You can but the chances of something going wrong are higher. Flash TWRP with fastboot, then firmware with fastboot, then ROM with TWRP is your best bet.
Hey All,
I have a Moto G 2013 (1st gen I believe). A while back, I wanted to install lollipop without it being available so I flashed the Brazil 5.0 ROM. Now, for some reason it won't boot and I got my phone stuck in bootloader. I can go to TWRP and the bootloader mode right now. I'm not sure what version it is, but I think its the XT1032 (non-lte for sure) and I've used it on Bell, Canada
.
I'm trying to follow a guide to restore back to stock but im not sure which model I should be downloading the firmware for. Can anyone help?
I'm using this guide: http://forum.xda-developers.com/showthread.php?t=2542219 and I tried a XT1032 ROM (Brazil) but when following the first command "mfastboot flash partition gpt.bin" didn't work. Should I just ignore this and move forward? I believe somewhere in the thread it said to ignore it but I'm not positive. Note: I dont want service, I want to use it as a glorified mp3 player for my car
Thanks in advance and any help is appreciated!
EDIT: I tried flashing a couple of roms in bootloader mode via adb from the aformentioned tutorial, but I keep getting errors when trying to flash the recovery, boot, partition, etc. Can anyone please help? Thanks.
mohitrocks said:
EDIT: I tried flashing a couple of roms in bootloader mode via adb from the aformentioned tutorial, but I keep getting errors when trying to flash the recovery, boot, partition, etc. Can anyone please help? Thanks.
Click to expand...
Click to collapse
It is strange that you can flash ROM in recovery but cant flash rec, my suggestion is checking your rec file,substitute with a Twrp rec and flash again. if success, you can try to flash a zip ROM.
Thankyou for the response! I appreciate it. Sorry, I should've been more clear. I was trying to flash official firmwares through bootloader, not roms. I tried flashing two different firmwares (XT1032, as per the barcode setting on my bootloader mode), and I keep getting errors when trying to flash using adb commands. It sends the files correctly but fails at writing them. I'm not sure what the issue is, but it may be because I was on Android 5 (lollipop) and I was trying an older firmware (i.e. older partition table). Currently trying a 5.0 firmware (brazil XT1032!) If anyone has any advice, please let me know! Thanks again!
i am having a radio problem with my moto g 3rd gen 2015. wifi mac address is showing 02:00:00:00:00 even cellular service is showing no service and battery dies automatically after few hours even if its fully charged. HELP ME.....
please give us some more info,
how did this happen?
do you have bootloader unlocked?
if yes what did you flash?
which model name?
which android version?
and more..
HelpMeruth said:
please give us some more info,
how did this happen?
do you have bootloader unlocked?
if yes what did you flash?
which model name?
which android version?
and more..
Click to expand...
Click to collapse
my device doesnt have any bootloader unlocked before and my device have a stock android when i updated my phone from OTA suddenly i am stuck with my dead wifi and cellular service. then i saw few forum where they tried to root and install some applications then i unlocked my bootloader, installed twrp and tried to root my device still same so i have my backup on twrp so i revert back to stock android.
Android 6.0.1 MM
Model :- XT1550
Bootloader :- Unlocked
badal_baidar said:
my device doesnt have any bootloader unlocked before and my device have a stock android when i updated my phone from OTA suddenly i am stuck with my dead wifi and cellular service. then i saw few forum where they tried to root and install some applications then i unlocked my bootloader, installed twrp and tried to root my device still same so i have my backup on twrp so i revert back to stock android.
Android 6.0.1 MM
Model :- XT1550
Bootloader :- Unlocked
Click to expand...
Click to collapse
As u already have backup and u have twrp recovery aswell i try flashing squid kernel latest version?? it seems like a kernel issue to me or you can always take backup of evry important stuff with titanium backup and re flash the ROM's or stock firmware ...still give a try to squid kernel..
Rahuketu2 said:
As u already have backup and u have twrp recovery aswell i try flashing squid kernel latest version it seems like a kernel issue to me or you can always take backup of evry important stuff with titanium backup and re flash the ROM's or stock firmware ...still give a try to squid kernel..
Click to expand...
Click to collapse
tried squid kernel still same problem.
Have you tried fastboot re-flashing modem? Follow fastboot factory flashing guide here-http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
Refer FAQ for modem associated commands.
Broadcasted from Zeta Reticuli
Hi,
I need reflash the firmware on my phone, but I can not flash the new firmware. I get a bug The bundle does not match the connected device. Any installation of custom rom will end with bootloop. The problem occurred after deodex stock rom. How can I get my phone back on? Thank you very much.
Problem solved
Hey, how did you solve the problem? I am facing same. I have a z5 E6603 I am sure it is 03, I flashed a lot of roms and today tried to flash original firmware via flashtool. It gave same error. I realized that it recognized my device as E6653. I thought that was a problem with build.prop, manually edited and tried to flash again, did not work. I wiped system partition and retried, did not work. I end up with carbon rom. How can I flash the ftf for 6603? Help me please. BTW I am using linux (to be more specific arch linux) and installed flashtool via AUR. Can this be a problem? Thanks
First I formatted a partition and then I installed AOSP ROM, for example Resurrection Remix. Than I ran mobile without setting an account, etc. Then I flashed the stock firmware.
kevin.kvik said:
First I formatted a partition and then I installed AOSP ROM, for example Resurrection Remix. Than I ran mobile without setting an account, etc. Then I flashed the stock firmware.
Click to expand...
Click to collapse
Thank you, I will download an AOSP ROM and try again tonight. I hope I can flash stock .54 again.