So here I am worrying about bricking my device if I go back to stock.
Here is some insight-
I have an unlocked XT1032 US retail moto g running Cyanogenmod 11 m4 snapshot. I am also running clockworkmod recovery and everything is working fine. I have heard of many people bricking their devices when they try and flash stock because the version doesnt match up with the bootloader version or something like that. My bootloader version is reported to be 4111.5 (The bootloader menu version is 41.11) from the "fastboot getvar all". So if I want to flash stock firmware what version do I need to choose. (can someone give me a link to the download?) Also is there any easier way to do this, perhaps can someone give me a clockworkmod backup of stock firmware and i can flash it via restore in the recovery. Also is there a way to get .img files of my whole phone via the dd command on the superuser shell. (Someone please give me a list of those commands to make a full image of my phone) so I can restore incase something goes wrong.
So pretty much all in all can someone please give me a link to the correct stock firmware for my phone that I can flash with NO issues and a list of commands that I can use to flash.
And just wondering what is mfastboot and how is it different from fastboot.
I should have made a backup with cwm recovery before I installed cm11 but I forgot which is why I made this thread. ALL HELP IS APPRECIATED! THANKS!
hey try downloading stock firmware from this link http://sbf.droid-developers.org/download.php?device=14&file=786
then follow instruction from this thread http://forum.xda-developers.com/showthread.php?t=2542219
if you failed once don't panic... just try another firmware from here http://sbf.droid-developers.org/phone.php?device=14
just make sure you choose firmware which is for retail US and also choose right version of android... but first try the firmware i have mentioned above...
skyguy126 said:
So here I am worrying about bricking my device if I go back to stock.
Here is some insight-
I have an unlocked XT1032 US retail moto g running Cyanogenmod 11 m4 snapshot. I am also running clockworkmod recovery and everything is working fine. I have heard of many people bricking their devices when they try and flash stock because the version doesnt match up with the bootloader version or something like that. My bootloader version is reported to be 4111.5 (The bootloader menu version is 41.11) from the "fastboot getvar all". So if I want to flash stock firmware what version do I need to choose. (can someone give me a link to the download?) Also is there any easier way to do this, perhaps can someone give me a clockworkmod backup of stock firmware and i can flash it via restore in the recovery. Also is there a way to get .img files of my whole phone via the dd command on the superuser shell. (Someone please give me a list of those commands to make a full image of my phone) so I can restore incase something goes wrong.
So pretty much all in all can someone please give me a link to the correct stock firmware for my phone that I can flash with NO issues and a list of commands that I can use to flash.
And just wondering what is mfastboot and how is it different from fastboot.
I should have made a backup with cwm recovery before I installed cm11 but I forgot which is why I made this thread. ALL HELP IS APPRECIATED! THANKS!
Click to expand...
Click to collapse
XdroidBD said:
hey try downloading stock firmware from this link http://sbf.droid-developers.org/download.php?device=14&file=786
then follow instruction from this thread http://forum.xda-developers.com/showthread.php?t=2542219
if you failed once don't panic... just try another firmware from here http://sbf.droid-developers.org/phone.php?device=14
just make sure you choose firmware which is for retail US and also choose right version of android... but first try the firmware i have mentioned above...
Click to expand...
Click to collapse
Yes what this guy says will work
Almost hard bricked my phone
Tomsgt said:
Yes what this guy says will work
Click to expand...
Click to collapse
during flash gpt.bin it said preflash valadition failed and on the bootloader screen it said partition table downgraded. Used CWM backup to restore and my phone is functioning again but I am still not stock. Please tell me what I am doing wrong? I have attached a screenshot of the command prompt screen.
Q30: i encounter '(bootloader) Preflash validation failed' error message when flashing Firmware Image
You may have updated to Android 4.4.4 via firmware image or OTA update. In this case you now also have the latest version of the Bootloader. That is why you get the above output when attempting to flash a 4.4.2 firmware image. ==> simply flash 4.4.4 images instead.
If the error still occurs, even with a 4.4.4 firmware image, then unlocking bootloader will be necessary.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2537119
There is no 4.4.4 Retail US yet. You can flash 4.4.4 Retail EU just fine. Recovery flashable zip here:
http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688
I have the retail us version though. She. Will the retail us 4.4.4 be available? And one important question when I do go back to stock 4.4.4 with the link you gave me via recovery, will my custom recovery get overwritten with the stock one?
XT1032 is a Global GSM model. you can flash an XT1032 ROM from anywhere in the world and it will work.
It's currently unknown when 4.4.4 US Retail will be available, but I do not think it will take too much longer.
Those zip files only include ROM and Kernel. Recovery will not be changed.
I'll be trying that tomorrow and I'll let you know if it works or not asap. But for now thanks!
You might also need to flash the 4.4.4 EU Retail radio zip available here:
http://forum.xda-developers.com/showthread.php?t=2649763
I read somewhere that when you flash stock ROM even though the recovery is not being changed, the stock ROM will overwrite the custom recovery in start up.
Is this true?
skyguy126 said:
I read somewhere that when you flash stock ROM even though the recovery is not being changed, the stock ROM will overwrite the custom recovery in start up.
Is this true?
Click to expand...
Click to collapse
Please help my phone is stuck in CWM recovery during the flash and I think the recovery is frozen. Can I hard reboot back to recovery or is my phone totaled? :crying:
This worked for me - http://forum.xda-developers.com/mot...-gpe-4-4-4-t2824377/post55768571#post55768571. Once back to 'base' you can update to 4.4.4 OTA or flash another ROM. And if you get stuck again, re-run this process. Three downloads, a few scripts to run; double-click easy.
Good luck.
Back at stock, just had to give CWM 10mins! Thanks everyone!
Related
I see many noobs like me being confused about how their root and custom recovery status should be before installing or even receivingLollipop OTA.
So my understanding is to receive OTA update and to successfully install it one needs to be on,
1. STOCK firmware of their respective device.
2.Custom recovery ( No TWRP, CWM or any other custom recovery ).
3.Bootloader should be locked.
Am i right?
So, my questions are,
1. I can understand why the first two needs to be done but why should we lock the bootloader?.
2. When i restored to stock firmware( Mine's XT1033 ) KK 4.4.4 from TWRP Recovery with this http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688 TWRP was still installed on my mobile.But when i reverted to stock 4.4.2( not 4.4.4 ) from fastboot using this http://forum.xda-developers.com/showthread.php?t=2700502 it successfully deleted TWRP.
So when we flash Stock ROM with Zip file it only installs the stock ROM and won't delete TWRP? and when we flash with fastboot( and .xml.zip file ) it removes TWRP? So am i right with this assumption?
If i am right how do i get back to stock recovery( delete TWRP ) since currently i have Stock 4.4.4 from the above link.
Help me and provide some correct scenarios to get Lollipop OTA.
this mototool has a functionallity of retrieving stock recovery
http://forum.xda-developers.com/showthread.php?p=50029015
it's pretty straight forward.
and as of what I've read, no need to relock bootloader for OTA to take place.. but I have no experience whatsoever..
I have 210.12.40.falcon_umts.EURetail.en.EU ROM installed on my XT1032.
I also have TWRP recovery. I want to install Lollipop OTA so I have to get back to stock recovery.
I tried to flash recovery.img from https://mega.co.nz/#!HRpRTR4Q!GNPL3a1Syc8vwholky1wNNfX4rQ-24swytFM6cUVowM via fastboot but it's not working (red triangle). How to do that?
You need to flash back to stock 4.4.4 with no root and stock recovey, update Motorola Services app in the play store, then check for OTA updates..
audit13 said:
You need to flash back to stock 4.4.4 with no root and stock recovey, update Motorola Services app in the play store, then check for OTA updates..
Click to expand...
Click to collapse
Please read before answering.
I have stock 4.4.4 and I have OTA avaliable. But I can't install it with custom recovery.
My problem is only that I can't install stock recovery.
Did you unzip the file and try to flash the stock recovery using fastboot?
You did not mention whether your ROM was rooted, had any apps removed, etc,. and this is why I suggest re-flashing to make sure you have a completely stock ROM.
You have the EU retail ROM on your phone and the link is for the Retail GB. Not sure if both ROMs use the same recovery and partition layout.
I've just finished flashing stock recovery, this is the guide I used:
http://forum.xda-developers.com/moto-g/general/gpe-ota-lrx21z-5-0-1-xt1033-xt1032-t2969847
You're going to have to download mfastbootv2, Minimal ADB and Fastboot and the batch files, then mfastboot flash recovery recovery.img and I guess you're done.
Though I've did the whole tutorial, so I'm not sure if that one command is enough if you only want to flash recovery, but I think that's all you need.
Need 5.0.1 stock recovery to update to 5.1 ota
Hello, does anyone have the stock recovery image for 5.0.1/LRX21Z.M002? I have been searching google for hours to try and find this image. Any help would be appreciated.
Pr3no said:
I've just finished flashing stock recovery, this is the guide I used:
http://forum.xda-developers.com/moto-g/general/gpe-ota-lrx21z-5-0-1-xt1033-xt1032-t2969847
You're going to have to download mfastbootv2, Minimal ADB and Fastboot and the batch files, then mfastboot flash recovery recovery.img and I guess you're done.
Though I've did the whole tutorial, so I'm not sure if that one command is enough if you only want to flash recovery, but I think that's all you need.
Click to expand...
Click to collapse
audit13 said:
Did you unzip the file and try to flash the stock recovery using fastboot?
You did not mention whether your ROM was rooted, had any apps removed, etc,. and this is why I suggest re-flashing to make sure you have a completely stock ROM.
You have the EU retail ROM on your phone and the link is for the Retail GB. Not sure if both ROMs use the same recovery and partition layout.
Click to expand...
Click to collapse
So, for last 2 hours I was trying to flash stock recovery. I tried to flash different ROMs, wiped data and system several times. Nothing seemed to work. After flashing recovery.img from any stock firmware package there always was red triangle and it didn't work. All custom recoveries works.
So since I've already had my data wiped, I just flashed Lollipop with fastboot and it works well. But still doesn't have stock recovery.
I'm trying to update to either official LP or AOSP lollipop, but trying to flash a zip with recovery just ends in errors with all the zips I've tried to flash with both clockwork and Phil Whi Touch, some zip files fail because of bad footer, some actually say "installed sucessfully" and then just reboot in to my old 4.4.4 setup.
Is this due to a locked bootloader?
I actually can flash ROMS using Sony Mobile Flasher but I've only found the 4.4.4 stock D6603_23.0.A.2.93_Generic GLOBAL.ftf file and not a LP version.
Any Ideas where to go from here?
E-Chan42 said:
I'm trying to update to either official LP or AOSP lollipop, but trying to flash a zip with recovery just ends in errors with all the zips I've tried to flash with both clockwork and Phil Whi Touch, some zip files fail because of bad footer, some actually say "installed sucessfully" and then just reboot in to my old 4.4.4 setup.
Is this due to a locked bootloader?
I actually can flash ROMS using Sony Mobile Flasher but I've only found the 4.4.4 stock D6603_23.0.A.2.93_Generic GLOBAL.ftf file and not a LP version.
Any Ideas where to go from here?
Click to expand...
Click to collapse
wow,
OK, official lollipop does not need an unlocked bootloader but AOSP does.
Also, the official flashtool from Sony (Often called EMMA and downloaded from Sony) DEFINATELY needs an unlocked bootloader, it will not work without one.
Only the unofficial flashtool (From flashtool.net) will work to flash FTF files on both locked and unlocked bootloader.
Please provide the actual setup of your phone and show the outputs of recovery or flashtool once you try to flash
dont even try flashing any custom ROMs, youre going to end up bricking your device.
Wtf?. Please do not spread confusion here. Base your posts on facts.
Talk about scaring the users away from custom ROM's
I meant flashing custom roms (aosp: cm roms) on a locked bootloader lol.. My bad
LitoNi said:
I meant flashing custom roms (aosp: cm roms) on a locked bootloader lol.. My bad
Click to expand...
Click to collapse
No problem, good you explained.
Hi,
It's been years that I've been living with the XT925 on CM11 JBBL and as I've been following latest developments on CM 12.1 and want to give it a try.
I've been searching for the past week on how to safely perform the bootloader upgrade so I can flash CM12.1. As it turns out there is a lot of disperse information on how to do it, followed by scary cases of soft bricked devices.
Current device status:
- Bootloader Unlocked
- Rooted
- CM11 M12 JBBL
- Everything works fine
What I already know:
- I have to Unroot my device
- Need to flash stock 4.1.2
- Must check if everything works once in stock
What I need help:
- Should I download OTA via the stock firmware?
- Should I flash stock recovery?
- Should I perform the update from the device or should I extract the OTA and change something and then flash it manualy?
- Is there any tutorial that I should've found on my searches?
On a sidenote: is there any chance of my bootloader to be relocked and/or loose any chance of future root access due to the OTA?
I believe that as people realise that CM12.1 is stable some noob friendly thread to the ancient JBBL's out there would be much apreciated.
Thanks in advance!
If I were you, I would just flash straight to KK with RSD or House of Moto. If you go this route, you won't need to flash back or reinstall stock recovery. Flashing the FXZ will reinstall stock recovery, but if you use House of Moto you can use an option to flash aftermarket recovery. Flashing shouldn't relock your boot loader, either.
RikRong said:
If I were you, I would just flash straight to KK with RSD or House of Moto. If you go this route, you won't need to flash back or reinstall stock recovery. Flashing the FXZ will reinstall stock recovery, but if you use House of Moto you can use an option to flash aftermarket recovery. Flashing shouldn't relock your boot loader, either.
Click to expand...
Click to collapse
In order to flash straight to KK I need to obtain it via OTA download while in Stock JB.
I haven't found any KK image laying arround, so this might be the only route.
Any other advices will be much apreciated RikRong.
Can you find the firmware on MotoFirmware.com, when it's actually up?
Try this: http://motofirmware.center/files/
dirceucorsetti said:
In order to flash straight to KK I need to obtain it via OTA download while in Stock JB.
I haven't found any KK image laying arround, so this might be the only route.
Any other advices will be much apreciated RikRong.
Click to expand...
Click to collapse
The only one firmware for xt925 available is from Canda Retail, here is the link
Hey All,
I have a Moto G 2013 (1st gen I believe). A while back, I wanted to install lollipop without it being available so I flashed the Brazil 5.0 ROM. Now, for some reason it won't boot and I got my phone stuck in bootloader. I can go to TWRP and the bootloader mode right now. I'm not sure what version it is, but I think its the XT1032 (non-lte for sure) and I've used it on Bell, Canada
.
I'm trying to follow a guide to restore back to stock but im not sure which model I should be downloading the firmware for. Can anyone help?
I'm using this guide: http://forum.xda-developers.com/showthread.php?t=2542219 and I tried a XT1032 ROM (Brazil) but when following the first command "mfastboot flash partition gpt.bin" didn't work. Should I just ignore this and move forward? I believe somewhere in the thread it said to ignore it but I'm not positive. Note: I dont want service, I want to use it as a glorified mp3 player for my car
Thanks in advance and any help is appreciated!
EDIT: I tried flashing a couple of roms in bootloader mode via adb from the aformentioned tutorial, but I keep getting errors when trying to flash the recovery, boot, partition, etc. Can anyone please help? Thanks.
mohitrocks said:
EDIT: I tried flashing a couple of roms in bootloader mode via adb from the aformentioned tutorial, but I keep getting errors when trying to flash the recovery, boot, partition, etc. Can anyone please help? Thanks.
Click to expand...
Click to collapse
It is strange that you can flash ROM in recovery but cant flash rec, my suggestion is checking your rec file,substitute with a Twrp rec and flash again. if success, you can try to flash a zip ROM.
Thankyou for the response! I appreciate it. Sorry, I should've been more clear. I was trying to flash official firmwares through bootloader, not roms. I tried flashing two different firmwares (XT1032, as per the barcode setting on my bootloader mode), and I keep getting errors when trying to flash using adb commands. It sends the files correctly but fails at writing them. I'm not sure what the issue is, but it may be because I was on Android 5 (lollipop) and I was trying an older firmware (i.e. older partition table). Currently trying a 5.0 firmware (brazil XT1032!) If anyone has any advice, please let me know! Thanks again!